Description
Comments, questions and offers welcomed! Please refer to the pictures and/or Item Condition Description(above) for condition of the item(s) ___________________:::::::Final sale for repair or project as is it no returns accepted::::::::___________________ ____________________:::::::Add two printed sheets of the receiver specifications:::::::::::_____________________ It shows some scratches, does not include remote and antenna cable, the Surr B audio outputs do not work. Everything else does work.... Audio Section:: THX Ultra2 Certified 7-channel High Power Amplifier Front 140 W + 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) Center 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) Surround 140 W + 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) Surround back 140 W + 140 W (8 ohms, 20Hz - 20kHz, 0.05 % THD) The AVR-4806 proudly bears the THX Ultra2 logo, certifying that it satisfies the strict standards of Lucasfilm, Inc., governing performance, features, sound quality, power, stability into low-impedance speaker loads (3.2 ohms and higher), and ease of operation. New DDSC-Digital, for dramatically improved processing performance The New DDSC (Dynamic Discrete Surround Circuit)- Digital is a high-quality surround sound reproduction circuit designed by Denon, and forms the core of the design concept that Denon pursues for all its A/V amps: to faithfully reproduce the original intent of content producers. Denon has succeeded in developing a fully dis- crete design for the New DDSC-Digital in which high-performance ICs are used in independent blocks to form a signal processor that reproduces surround sound, and the discrete design ensures that all channels are endowed with identical response and quality of sound. New 32-bit floating point DSP Three of the latest 32-bit floating point DSPs for the decoder. • 24-bit/192-kHz D/A Converter The latest high-accuracy 24-bit/192-kHz D/A converter has been employed for the audio DAC. • High-performance A/D Converter A high-performance A/D converter of 24-bit/192-kHz quality has been used to significantly boost S/N and dynamic range. AL24 Processing Plus, for high sound quality DENON Link, enabling high-speed, high-grade digital signal transmission IEEE 1394 digital interface Large-output Power Amp Section and Power Supply Configuration, for stable high-power output Stabilized, independent power supplies for each circuit Chassis construction to suppress internal/external vibration Pure Direct mode, for the pure enjoyment of music in high-quality sound Configurable Center, Surround and Surround Back Amplifiers • Multi-zone system: a 5.1-channel theater in the main room and a monaural environment in a second and third rooms. • Bi-amp system: Front (L/R) channels are bi-wired in a 5.1-channel theater to improve playback quality in the front for enhanced listening enjoyment. Pre-amp with Variable Gain Volume... New Auto Set-up and Room EQ, featuring MultEQ from Audyssey, for overall listening area support using supplied microphone Full support for the most advanced surround playback formats • Dolby Digital EX • Dolby Digital • Dolby Pro Logic IIx • Dolby Headphone • DTS-ES • DTS 96/24 • DTS Neo:6 • DTS • HDCD THX, THX Surround EX, THX Ultra2 Post Processing Modes Original surround modes from Denon XM Satellite Radio Ready with optional Connect and Play antenna* *Subsciption to XM services also required. Video Section Video Up/Down Conversion capable of output to HDMI port The AVR-4806 includes a video up/down conversion function that allows the unit to be connected to the video monitor via a single cable regardless of the video input signals format as follows: 1) Composite video signals are converted to HDMI (*1), component video, & S-video; 2) S-video signals are converted to HDMI (*1), component video, & composite video; 3) Component video signals are converted to HDMI (*1), composite video (*2), & S-video (*2). *1. Output signal up-converted to HDMI retains the resolution of the input signal. *2. Down-conversion from component video to composite or S-video applies only to 480i input signals. Component video switching The AVR-4806 is equipped with 3 sets of component video inputs. There are also 2 sets of component video outputs capable of simultaneous output, allowing component video with high picture quality to be enjoyed on two monitors at the same time. Settings do not need to be changed each time a monitor is switched. These component video circuits achieve sharp HDTV video quality in a frequency range up to 100 MHz. High-speed, high-accuracy 12-bit/216-MHz Video DAC A high-speed, high-accuracy 12-bit/216-MHz video DAC is used in the video circuitry for component video, S-video, and composite video signals. This DAC enhances the reproducibility of delicate-level video signals, allowing high-definition video to be played back with greater fidelity to the original images. In addition, noise shaped video (NSV) technology improves video S/N for greater signal linearity. Composite and S-video signal processing The AVR-4806 uses a time base corrector (TBC) in converting composite video & S-video signals to component video to suppress jitter in the video signal during playback. Expandability Analog EXT IN terminal 3 Source and Zone Capability Ethernet and RS-232C terminas, for external 3rd party control systems and possible future upgrades. ___$$$___Excessive shipping I make refunds I can also pay half the shipping, any questions we discuss the cost ____$$$_____ You can choose delivery service UPS FedEx and USPS check the estimate before ordering It will be well packed and protected to avoid damage. Weight package 58 lbs Measures package 24 x 24 x 12
| 
Live search