All original genuine German-built D. Klimo phono preamp with solid-state power supply. Very warm rich sound, switchable moving coil and moving magnet inputs. MC input presently has a 250 ohms resistor installed, this is easily reachable and replaceable with any desired value, but must be soldered into the special sockets for each channel. Gain is about 40 db MM, total 63 db for MC. I used it with a 0.25mV output moving coil cartridge with no noticeable tube hiss. Note that this unit is all-tube including the MC function, there are no step-up transformers in the signal path. 4x E88CC, 2 x 12AT7 No functional issues, cosmetically very good. One minor defect: one of the screw-down posts supporting the smoked glass top is broken off the chassis, but the post and chrome nut are secured to the glass itself so there is no visible or functional defect.There are many Chinese copies of the excellent Klimo designs, this is a classic piece that was built in Germany before Klimo moved to Italy. Schematics included, also parts list not shown in photos. I am not the original owner but have enjoyed it for a number of years. It has been used often, not sitting in storage.I will ship to the USA only in 2 boxes, UPS ground.Payments by Paypal only please.No warranty made or implied, no returns for any reason.Will be packed perfectly for safe transit including special care with the glass top plate.

All original genuine German-built D. Klimo phono preamp with solid-state power supply. Very warm rich sound, switchable moving coil and moving magnet inputs. MC input presently has a 250 ohms resistor installed, this is easily reachable and replaceable with any desired value, but must be soldered into the special sockets for each channel. Gain is about 40 db MM, total 63 db for MC. I used it with a 0.25mV output moving coil cartridge with no noticeable tube hiss. Note that this unit is all-tube including the MC function, there are no step-up transformers in the signal path. 4x E88CC, 2 x 12AT7 No functional issues, cosmetically very good. One minor defect: one of the screw-down posts supporting the smoked glass top is broken off the chassis, but the post and chrome nut are secured to the glass itself so there is no visible or functional defect.There are many Chinese copies of the excellent Klimo designs, this is a classic piece that was built in Germany before Klimo moved to Italy. Schematics included, also parts list not shown in photos. I am not the original owner but have enjoyed it for a number of years. It has been used often, not sitting in storage.I will ship to the USA only in 2 boxes, UPS ground.Payments by Paypal only please.No warranty made or implied, no returns for any reason.Will be packed perfectly for safe transit including special care with the glass top plate.

Liebe HiFi Freunde , Hier ein sehr selten angebotene Röhren ausgangsstufe von D.Klimo ( Beag ) Damals in Verwendung an einem Node N130 und Jungson vollverstärker . Durch aktuellen Wechsel der Verstärker Einheit und Wechsel der Lautsprecher, nicht mehr in Nutzung. Ein recht seltenes Teil in einer Kette um das ausgangssignal des CD Player zu verstärken und einen sehr angenehm warmen röhren Sound in jeder Kette zu erzeugen . Gewechselt wurde noch die standart feinsicherung durch eine reinsilber von willbrand Akustik . Alle technischen Details die ich im Internet gefunden habe , setzte ich unten mit dran . Ansonsten bitte den Bildern entnehmen. Zu den Daten wie folgt : Anzahl Röhren 4 Röhren Anzahl Transistoren Halbleiter vorhanden. Halbleiter Hauptprinzip NF-Verstärkung Wellenbereiche - ohne Betriebsart / Volt Wechselstromspeisung / 230 Volt Lautsprecher - Für Kopfhörer oder NF-Verstärker von Radiomuseum.org Modell: Beag - Klimo GmbH, Dipl. Ing. D.; Form Tischmodell, Zusatz nicht bekannt - allgemein. Abmessungen (BHT) 300 x 120 x 150 mm / 11.8 x 4.7 x 5.9 inch Bemerkung Röhren CD Filter. Abgriff im CD Player vor der Ausgangsstufe. Nettogewicht 5 kg / 11 lb 0.2 oz (11.013 lb) Bitte nehmt euch die Zeit und schaut und hört es euch persönlich an , Abholung bevorzugt, sicherer Versand auch möglich bei Übernahme der Kosten und dem Risiko .