Crown XTi 4002 2-Channel Rack Mount Power Amplifier XTi4002 AMP With Full Manufacturers Warranty Items Description An item that has been professionally restored to working order by a manufacturer or manufacturer-approved vendor. This means the product has been inspected, cleaned, and repaired to meet manufacturer specifications and is in excellent condition. Full manufacturers warranty and free one year extended warranty from Gigasonic. Crown XTi 4002 Power Amplifier is near-legendary, and the XTi 2 series is yet another example of rock-solid, powerful, innovative power amplification. Here, the XTi 4002 is packed with Peak Plus Limiters that give you full control over threshold, attack, and release. Whats more, the Enhanced Subharmonic Synth section gives you control over frequency, gain, and filter type, so you can tune your XTi 4002 to your system. Beyond that, there are three fan modes you can choose from - normal, early, and fullspeed - so you can match the fan performance to your needs. Other noteworthy features include system monitoring for software visibility of AC line voltage and power supply temperature, integrated cast-aluminum handles for easy handling and dependable durability, a locking power cord clip, high-tech control software, and 29 user-definable presets. Bottom line? The XTi 2 series, including the XTi 4002, gives you an excellent solution for power amplification. Choose the one that best meets your power needs. Features Stereo Wattage: 1600W @ 2 ohms, 1200W @ 4 ohms, 650W @ 8 ohms Bridged Mono Wattage: 2400W @ 8 ohms, 3200W @ 4 ohms Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable Specifications Number of Channels 2 Watts/Side @ 8 ohms 650W Watts/Side @ 4 ohms 1200W Watts/Side @ 2 ohms 1600W Watts Bridged 2400W @ 8 ohms Cooling System Porportional Speed Fan with Front-to-Rear Airflow DSP Yes Filters Yes Inputs 2 x XLR Outputs 2 x Binding Post, 2 x SpeakON Rack Spaces 2U Height 3.5 Depth 12.25 Width 19 Weight 18.5 lbs. We want you to be 100% satisfied with your purchase. Thats why we go to great lengths to provide accurate, full-detail descriptions in every item. However, we realize there are times when you may not be 100% satisfied with your purchase for whatever reason. How do I return an item? Simply email us within 14 days of receiving the item and tell us you would like to return the item. We will promptly issue you a Return Authorization (RA) number. Upon receipt of your item back, we will issue you a FULL refund LESS shipping cost and a 15% re-stocking fee (Sony products will be 25% re-stocking fee). This fee helps us ensure we can continue to offer you the best selection and service. Headphones, microphones, software cant be returned. Oversized items (digital pianos, etc.) can be returned but buyers will be responsible for possible shipping damage when returned. Product must be in resalable condition. Customer is responsible for return shipping. Buyers will be responsible for international returns of any kind. All costs will be the buyers responsibility. Warranty All products come with manufacturers warranty and support. B-Stock or Open box units are also covered under manufacturers warranty and support. Gigasonic offers 30 days store warranty. Defective items can be returned for exchange without incurring re-stocking fee. Trusted ebay seller For more warranty details, please contact us. Payment Method Paypal is preferred. We accept Visa/MasterCard, Amex, Discover, Payment upon pickup. Contact me for payment methods to pay on pickup. Shipping Method Orders will be shipped via UPS or USPS mail of your choice. We ship to Military addresses and PO boxes addresses and None Continental US addresses, but they may cost more to ship. Free shipping is normally not available to these addresses. We do ship some extremely heavy items internationally. Please contact us for shipping quote. Buyers can visit our store in San Jose for local pickup. Shipping Times For Priority Mail please allow at least 6-10 business days to arrive in your country after shipment. For Express Mail please allow at least 3-5 business days to arrive in your country after shipment. In some cases shipments can take longer than the standard time. This is usually due to customs delay, or some other problem with the delivery service. Keep in mind that we are not responsible for shipments that do not arrive within a timely manner if we have shipped the item promptly. We ship most of our products next business day. Shipping service is not available during weekends and national holidays. Home • About • Policies • Shipping • FAQ • Contact Copyright © 2017 Gigasonic. All rights reserved.

Product InformationCrown XTi 4002 is a power amplifier that provides 650 W RMS power in order to enhance the beats and tones of your favorite music. This 2-channel model is fitted with XLR input connectors. Furthermore, the amplifier is integrated with Speakon outputs, which deliver clear and undistorted sound.Product IdentifiersBrandCrownMPNXTI4002GTIN0871015005393UPC0871015005393ModelXTi 2 Series 4002eBay Product ID (ePID)114663014Product Key FeaturesAudio OutputsBinding Post, speakONAudio InputsXLRNumber of Channels2Number of Inputs2ColorGrayFeaturesNo, LimiterNumber of Outputs2TypePower AmplifierPower1600 W

Product InformationCrown XTi 4002 is a power amplifier that provides 650 W RMS power in order to enhance the beats and tones of your favorite music. This 2-channel model is fitted with XLR input connectors. Furthermore, the amplifier is integrated with Speakon outputs, which deliver clear and undistorted sound.Product IdentifiersBrandCrownMPNXTI4002GTIN0871015005393UPC0871015005393ModelXTi 2 Series 4002eBay Product ID (ePID)114663014Product Key FeaturesAudio OutputsBinding Post, speakONAudio InputsXLRNumber of Channels2Number of Inputs2ColorGrayFeaturesNo, LimiterNumber of Outputs2TypePower AmplifierPower1600 W

Levs 13 Electronics · Tools · Games · & More Shop Our Other Auctions View Our Feedback Crown Xti 4002 Rack Mount Amplifier 650W x 2 at 8 ohms, 3,200W x 1 at 4 ohms bridged Digital Signal Processing Gently used and in overall very good to excellent cosmetic condition and perfect working order, this powerful, high-quality rack=mounted 2-channel amplifier is the Crown 4002. From the XTi series and featuring DSP electronics, this unit has some minimal signs of light usage and only some minor dust and other blemishing. Overall, this is mostly-pristine, and it will deliver you the power you need for your performances or in the studio. From the Website: Crown XTi 4002 Power amplifier — 650W x 2 at 8 ohms, 3,200W x 1 at 4 ohms bridged Power and protect your system: Crowns XTi 2 Series power amplifiers dont just make your speakers sing — they serve as vital lynchpins for your sound system, allowing your music to reach the masses without compromise or overexertion. The Crown name on the front of these amps ensures youve got a trustworthy power source thats loaded with innovative features, like advanced limiters that give you full control, plus integrated signal processing tools for dialing in the perfect tone. When its time to raise the hair on the back of the crowds neck, a Crown XTi 2 amplifier does the heavy lifting for you. Heavy-duty juice: The Crown XTi 4002 amplifier serves up 650 watts per channel at 8 ohms, 1200 watts per channel at 4 ohms, and up to 3200 watts in bridged mode. The proportional speed fan features three user-defined settings — normal, early, and full-speed — to help keep things cool within the front-to-rear airflow system. The universal tracking switch-mode power supply maintains efficiency and reliability. Steel construction with a cast aluminum front panel helps keep this dynamo robust under repeated use. Up front the amp boasts independent level control knobs and LEDs, an on/off switch, LCD screen, and three menu control buttons. Youll be able to monitor the amps presets and processing status through the LCD screen. The Crown XTi 4002 offers balanced XLR inputs, as well as binding posts and Neutrik Speakon® outputs for the speakers, plus XLR loop-thru connectors for connecting additional amps. Integrated cast aluminum rack handles promote smooth transport between the van and the gig, and these amps are eminently rackable and stackable. Push it to the limit: Looking for a way to push your sound to the edge without going too far afield? Crowns Peakx Plus Limiter technology gives you total control over threshold, attack, and release times, so you can dial in your sound at the boundaries without worry about excess stress on your system. Its defeatable, just in case you want to work around it. Built-in processing: The XTi 4002 gives you plenty of options for shaping your sound from the rack. Its got 6 parametric filters per channel for the input EQ, plus high- and low-pass crossovers. 8 parametric filters per channel on the output EQ give you further adjustments. You also get built-in delay and 30 total presets, 29 of which are user-defined. Crowns SubHarmonic Synth feature takes your low-frequency signal, then synthesizes a new signal with the same characteristics, just one octave lower. The XTi 4002 sums the two signals and sends the result to your subwoofer. You can adjust for frequency, gain, and filter type to get the most out of your low end. HiQnet for further adjustments: You can connect the XTi 2 Series amp to your laptop using the amplifiers USB plug, providing access to optional HiQnet Band Manager or Audio Architect software which you can download. These software programs allow you to tweak your amps and system settings right from your laptop, and save the settings for future gigs. They can also give you real world feedback on how different components can fit into your system down the road. Features: 2-channel power amplifier with built-in digital signal processing Power output: 650 watts per channel at 8 ohms 1200 watts per channel at 4 ohms 1600 watts per channel at 2 ohms 2400 watts (mono) at 8 ohms in bridged mode 3200 watts (mono) at 4 ohms in bridged mode Frequency response: 20-20,000 Hz (-1 dB) Signal-to-noise ratio: 100 dB Total harmonic distortion: 0.5% (20-20,000 Hz) Independent right- and left-channel level controls LCD screen with sel/prev/next buttons Digital signal processing: defeatable Peakx Plus Limiters for each channel input EQ: 6 parametric filters per channel high-pass and low-pass crossover filters output EQ: 8 parametric filters per channel 50 ms of total delay SubHarmonic Synth Proportional speed fan with front-to-rear airflow and three user-defined settings Initial power, DC voltage, short circuit, thermal, and current limiting protection Front-panel LEDs indicate power, signal, -10dB and -20dB below clipping, ready, clipping, and temperature Connections: inputs: balanced XLR outputs: binding posts and Neutrik Speakon XLR Link/Out outputs to send signal to another amp USB connection for HiQnet applications SHIPPING: All items have a handling time of 3 business days after the item has been paid for and the auction completed. United States: Shipping Costs Will Be: FREE for the United States Items are shipped via Federal Express or through the United States Postal Service (our choice). We can only ship this item to the United States, so dont ask us to ship it abroad. Items will be sent to your registered eBay address only Auctions are generally shipped within 3 business days after payment is received and funds have cleared. Bulky, larger, or heavier items may take more time. PAYMENTS: Payment is expected within 3 days of auction closing. Do not bid if you do not intend to pay. If you have not paid or have not made satisfactory payment arrangements, we will open a non-paying bidder claim on the 4th day. Please ask all questions before bidding. Please do not contact us with counter offers, requests to ship to countries that we do not ship to, or requests to end the auction early or to sell at a lower price than listed; they will go unanswered.All items shall be shipped to the address on your Paypal Account. International Bidders: We do not physically ship outside of the united States. Any International shipments are handled solely through Ebays Global Shipping Program. You will be responsible for any additional shipping costs and customs tariffs associated with International Shipping. We accept Paypal as payment RETURNS: We will accept returns on merchandise that arrives damaged or defective within 14 days of receipt. Returns must be initiated within 14 days of receipt. Please contact us first rather than open a case with ebay. It will make things go faster for you Buyer pays return shipping. Items must be returned in the same condition as received. New items sold sealed that have been opened cannot be returned Any items that have been altered, customized, or returned incomplete will not be accepted for return. This includes the altering of any firmware, software, bios, etc.

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Crown XTI4002 XTI-4002 2 Channel 2400 Watt Power Amplifier with Peak Plus Limiters Providing the Ultimate in System Performance and Protection By Allowing Full Control Over Threshold, Attack, and Release --> Click Thumbnails to Enlarge Condition and Warranty Condition: AN OPEN BOX ITEM Warranty: 6 YEAR AUDIOSAVINGS Product Description Authorized Crown Audio Dealer! Input EQ 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control. Output EQ 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed. Delay For signal alignment of driver; 50 mS of total delay. SubHarmonic Synth Takes the low-frequency content of the input signal and synthesizes a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type. Peakx™ Plus Limiter User defeatable limiter that allows users to control Threshold, Attack, and Release times. Presets 50 total presets, 49 of which are user-definable. Features XTI4002 2 Channe Power Amplifier RMS Power @ 2 Ohm: 1600 Watt x 2 RMS Power @ 4 Ohm: 1200 Watt x 2 RMS Power @ 8 Ohm: 650 Watt x 2 Bridge RMS Power @ 8 Ohm: 2400 Watt x 1 Bridge RMS Power @ 4 Ohm: 3200 Watt x 1 Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable Performance Sensitivity (for full rated power at 4 ohms): 1.4 Vrms Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) Total Harmonic Distortion (THD): < 0.5% Damping Factor 20 Hz to 1 kHz: > 500 Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db Input Impedance (nominal) Balanced: 20k ohms Unbalanced: 10k ohms Maximum Input Signal: +22 dBu typical AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz AC Line Current(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 10.5A; no more than 38W at idle Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) Controls Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifier Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen: Backlit liquid crystal display that shows preset and processing status Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs) –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power Input/Output Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel Output Connectors: Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors) HiQnet™ USB Connector: Type B, connects to HiQnet™ network Constructions Chassis: Steel Front Panel: Cast-aluminum Cooling: Proportional speed fan with front-to-rear airflow Dimensions (WxHxD): 19 x 3.5 x 12.25 Net Weight: 18.5 lbs (8.4 kg) Shipping Weight: 21.5 lbs (9.8kg) Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 6 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: XTI4002* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Crown XTI4002 XTI-4002 2 Channel 2400 Watt Power Amplifier with Peak Plus Limiters Providing the Ultimate in System Performance and Protection By Allowing Full Control Over Threshold, Attack, and Release --> Click Thumbnails to Enlarge Condition and Warranty Condition: AN OPEN BOX ITEM Warranty: 6 YEAR AUDIOSAVINGS Product Description Authorized Crown Audio Dealer! Input EQ 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control. Output EQ 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed. Delay For signal alignment of driver; 50 mS of total delay. SubHarmonic Synth Takes the low-frequency content of the input signal and synthesizes a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type. Peakx™ Plus Limiter User defeatable limiter that allows users to control Threshold, Attack, and Release times. Presets 50 total presets, 49 of which are user-definable. Features XTI4002 2 Channe Power Amplifier RMS Power @ 2 Ohm: 1600 Watt x 2 RMS Power @ 4 Ohm: 1200 Watt x 2 RMS Power @ 8 Ohm: 650 Watt x 2 Bridge RMS Power @ 8 Ohm: 2400 Watt x 1 Bridge RMS Power @ 4 Ohm: 3200 Watt x 1 Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable Performance Sensitivity (for full rated power at 4 ohms): 1.4 Vrms Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) Total Harmonic Distortion (THD): < 0.5% Damping Factor 20 Hz to 1 kHz: > 500 Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db Input Impedance (nominal) Balanced: 20k ohms Unbalanced: 10k ohms Maximum Input Signal: +22 dBu typical AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz AC Line Current(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 10.5A; no more than 38W at idle Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) Controls Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifier Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen: Backlit liquid crystal display that shows preset and processing status Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs) –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power Input/Output Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel Output Connectors: Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors) HiQnet™ USB Connector: Type B, connects to HiQnet™ network Constructions Chassis: Steel Front Panel: Cast-aluminum Cooling: Proportional speed fan with front-to-rear airflow Dimensions (WxHxD): 19 x 3.5 x 12.25 Net Weight: 18.5 lbs (8.4 kg) Shipping Weight: 21.5 lbs (9.8kg) Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 6 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: XTI4002* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Crown XTI4002 XTI-4002 2 Channel 2400 Watt Power Amplifier with Peak Plus Limiters Providing the Ultimate in System Performance and Protection By Allowing Full Control Over Threshold, Attack, and Release --> Click Thumbnails to Enlarge Condition and Warranty Condition: AN OPEN BOX ITEM Warranty: 6 YEAR AUDIOSAVINGS Product Description Authorized Crown Audio Dealer! Input EQ 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control. Output EQ 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed. Delay For signal alignment of driver; 50 mS of total delay. SubHarmonic Synth Takes the low-frequency content of the input signal and synthesizes a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type. Peakx™ Plus Limiter User defeatable limiter that allows users to control Threshold, Attack, and Release times. Presets 50 total presets, 49 of which are user-definable. Features XTI4002 2 Channe Power Amplifier RMS Power @ 2 Ohm: 1600 Watt x 2 RMS Power @ 4 Ohm: 1200 Watt x 2 RMS Power @ 8 Ohm: 650 Watt x 2 Bridge RMS Power @ 8 Ohm: 2400 Watt x 1 Bridge RMS Power @ 4 Ohm: 3200 Watt x 1 Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable Performance Sensitivity (for full rated power at 4 ohms): 1.4 Vrms Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) Total Harmonic Distortion (THD): < 0.5% Damping Factor 20 Hz to 1 kHz: > 500 Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db Input Impedance (nominal) Balanced: 20k ohms Unbalanced: 10k ohms Maximum Input Signal: +22 dBu typical AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz AC Line Current(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 10.5A; no more than 38W at idle Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) Controls Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifier Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen: Backlit liquid crystal display that shows preset and processing status Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs) –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power Input/Output Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel Output Connectors: Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors) HiQnet™ USB Connector: Type B, connects to HiQnet™ network Constructions Chassis: Steel Front Panel: Cast-aluminum Cooling: Proportional speed fan with front-to-rear airflow Dimensions (WxHxD): 19 x 3.5 x 12.25 Net Weight: 18.5 lbs (8.4 kg) Shipping Weight: 21.5 lbs (9.8kg) Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 6 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: XTI4002* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Crown XTI4002 XTI-4002 2 Channel 2400 Watt Power Amplifier with Peak Plus Limiters Providing the Ultimate in System Performance and Protection By Allowing Full Control Over Threshold, Attack, and Release --> Click Thumbnails to Enlarge Condition and Warranty Condition: AN OPEN BOX ITEM Warranty: 6 YEAR AUDIOSAVINGS Product Description Authorized Crown Audio Dealer! Input EQ 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control. Output EQ 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed. Delay For signal alignment of driver; 50 mS of total delay. SubHarmonic Synth Takes the low-frequency content of the input signal and synthesizes a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type. Peakx™ Plus Limiter User defeatable limiter that allows users to control Threshold, Attack, and Release times. Presets 50 total presets, 49 of which are user-definable. Features XTI4002 2 Channe Power Amplifier RMS Power @ 2 Ohm: 1600 Watt x 2 RMS Power @ 4 Ohm: 1200 Watt x 2 RMS Power @ 8 Ohm: 650 Watt x 2 Bridge RMS Power @ 8 Ohm: 2400 Watt x 1 Bridge RMS Power @ 4 Ohm: 3200 Watt x 1 Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable Performance Sensitivity (for full rated power at 4 ohms): 1.4 Vrms Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) Total Harmonic Distortion (THD): < 0.5% Damping Factor 20 Hz to 1 kHz: > 500 Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db Input Impedance (nominal) Balanced: 20k ohms Unbalanced: 10k ohms Maximum Input Signal: +22 dBu typical AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz AC Line Current(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 10.5A; no more than 38W at idle Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) Controls Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifier Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen: Backlit liquid crystal display that shows preset and processing status Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs) –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power Input/Output Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel Output Connectors: Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors) HiQnet™ USB Connector: Type B, connects to HiQnet™ network Constructions Chassis: Steel Front Panel: Cast-aluminum Cooling: Proportional speed fan with front-to-rear airflow Dimensions (WxHxD): 19 x 3.5 x 12.25 Net Weight: 18.5 lbs (8.4 kg) Shipping Weight: 21.5 lbs (9.8kg) Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 6 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: XTI4002* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Crown XTI4002 XTI-4002 2 Channel 2400 Watt Power Amplifier with Peak Plus Limiters Providing the Ultimate in System Performance and Protection By Allowing Full Control Over Threshold, Attack, and Release --> Click Thumbnails to Enlarge Condition and Warranty Condition: AN OPEN BOX ITEM Warranty: 6 YEAR AUDIOSAVINGS Product Description Authorized Crown Audio Dealer! Input EQ 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control. Output EQ 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed. Delay For signal alignment of driver; 50 mS of total delay. SubHarmonic Synth Takes the low-frequency content of the input signal and synthesizes a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type. Peakx™ Plus Limiter User defeatable limiter that allows users to control Threshold, Attack, and Release times. Presets 50 total presets, 49 of which are user-definable. Features XTI4002 2 Channe Power Amplifier RMS Power @ 2 Ohm: 1600 Watt x 2 RMS Power @ 4 Ohm: 1200 Watt x 2 RMS Power @ 8 Ohm: 650 Watt x 2 Bridge RMS Power @ 8 Ohm: 2400 Watt x 1 Bridge RMS Power @ 4 Ohm: 3200 Watt x 1 Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable Performance Sensitivity (for full rated power at 4 ohms): 1.4 Vrms Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) Total Harmonic Distortion (THD): < 0.5% Damping Factor 20 Hz to 1 kHz: > 500 Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db Input Impedance (nominal) Balanced: 20k ohms Unbalanced: 10k ohms Maximum Input Signal: +22 dBu typical AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz AC Line Current(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 10.5A; no more than 38W at idle Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing) Controls Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifier Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen: Backlit liquid crystal display that shows preset and processing status Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs) –10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip –20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power Input/Output Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel Output Connectors: Two Neutrik® Speakon® NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors) HiQnet™ USB Connector: Type B, connects to HiQnet™ network Constructions Chassis: Steel Front Panel: Cast-aluminum Cooling: Proportional speed fan with front-to-rear airflow Dimensions (WxHxD): 19 x 3.5 x 12.25 Net Weight: 18.5 lbs (8.4 kg) Shipping Weight: 21.5 lbs (9.8kg) Click here for the Owners Manual Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 6 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: XTI4002* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design