Description
Provides a versatile interface for HDMI, DisplayPort, VGA, and analog video sources as part of a complete DigitalMedia System. Connects to the DM 8G Fiber input of a DM Switcher or Receiver via CresFiber 8G. Includes a USB HID mouse/keyboard port and 10/100 Ethernet port. The DM-TX-401-S provides a versatile interface for computers and high-definition AV sources as part of a complete Crestron DigitalMedia system. It functions as a DM 8G Fiber transmitter and switcher, providing DisplayPort, HDMI, VGA, composite video, and analog audio inputs. It also functions as a control module, providing RS-232 and IR control ports, plus Ethernet and USB HID ports for a total connectivity solution. It can be rack-mounted, placed on a shelf, or attached under a table [1], and connects to the head end or display location using a single multimode fiber strand.[2] Video Switcher4x1 auto-switching, auto-detecting multi-format digital/analog inputs; Crestron QuickSwitch HD® technology Input Signal TypesDisplayPort, HDMI® w/Deep Color & 3D (DVI & Dual-Mode DisplayPort compatible [4]), RGB/VGA (RGBHV, RGBS, RGsB), component (YPbPr), S-Video (Y/C), composite (NTSC, PAL) [5] Output Signal TypesDM 8G® Fiber w/Deep Color & 3D [2] Resolutions, DisplayPort, Progressive640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz, plus any other resolution allowed by DisplayPort up to 165MHz pixel clock Resolutions, DisplayPort, Interlaced1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by DisplayPort up to 165MHz pixel clock Resolutions, HDMI, Progressive640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock Resolutions, HDMI, Interlaced720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock Resolutions, RGB640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz Resolutions, Component [5]480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60 Resolutions, Composite & S-Video [5]480i, 576i Analog-To-Digital Conversion12-bit 170 MHz per each of 3 channelsAudio Switcher4x1 with auto-detecting digital/analog inputs and analog audio breakaway Input Signal TypesDisplayPort, HDMI (Dual-Mode DisplayPort compatible), analog stereo Output Signal TypeDM 8G Fiber Digital Formats, DisplayPortDolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, LPCM up to 8 channels Digital Formats, HDMIDolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels Analog FormatsStereo 2-channel Analog-To-Digital Conversion24-bit 48 kHz Analog Input Level Compensation±10 dB Analog PerformanceFrequency Response: 20 Hz to 20 kHz ±0.75 dB;S/N Ratio: >90 dB, 20 Hz to 20 kHz A-weighted;THD+N: <0.05% @ 1 kHz;Stereo Separation: >90 dBCommunications Ethernet10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP USBSupports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[6] DigitalMediaDM 8G Fiber, HDCP, EDID, CEC, Ethernet HDMIHDCP, EDID, CEC NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI device and a control systemConnectors VID(1) RCA female, composite video input;Input Level: 1 Vp-p nominal;Input Impedance: 75 Ohms nominal PC(1) HD15 female, analog VGA/RGB/video input;Signal Types: VGA, RGB, component, S-Video, or composite [5];Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL;Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration;Input Impedance: 75 Ohms;Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr;Sync Input Level: 3 to 5 Vp-p;Sync Input Impedance: 510 Ohms AUDIO IN(1) 3.5mm TRS mini phone jack;Unbalanced stereo line-level audio input;Input Level: 2 Vrms maximum;Input Impedance: 10k Ohms AUDIO IN L, R(2) RCA female;Unbalanced stereo line-level audio input;Input Level: 2 Vrms maximum;Input Impedance: 10k Ohms HDMI(1) 19-pin Type A HDMI female;HDMI digital video/audio input (DVI & Dual-Mode DisplayPort compatible [4]) DISPLAY PORT(1) 20-pin DisplayPort female;DisplayPort digital video/audio input [3] COM(1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port;Up to 115.2k baud, hardware and software handshaking support IR(1) 2-pin 3.5mm detachable terminal block, IR/Serial port;IR output up to 1.1 MHz;1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud DM OUT MMF/SC(1) SC female optical fiber connector;DM 8G Fiber output;Connects to DM 8G Fiber input of a DM switcher, receiver/room controller, or other DM device via CresFiber® 8G fiber optic cable[2] 24VDC 0.75A(1) 2.1 x 5.5 mm DC power connector;24 Volt DC power input;PW-2407WU power pack included LAN(1) 8-wire RJ45 female;10Base-T/100Base-TX Ethernet port G(1) 6-32 screw, chassis ground lug USB HID (front)(1) USB Type A female;USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant deviceControls & Indicators PWR(1) green LED, indicates operating power supplied via local power pack RESET(1) miniature recessed pushbutton for hardware reset DM LINK(1) green LED, indicates DM link status SETUP(1) red LED and (1) miniature recessed pushbutton for Ethernet setup INPUT AUTO, VIDEO, PC, HDMI, DISPLAY PORT(5) green LEDs, indicate which input is selected or if auto-switch mode is active INPUT SELECT(1) pushbutton for selecting inputs or activating auto-switch mode LINK (rear)(1) green LED, indicates DM link status LAN (rear)(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activityPower Requirements Power Pack0.75 Amps @ 24 Volts DC;100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU includedEnvironmental Temperature32° to 104° F (0° to 40° C) Humidity10% to 90% RH (non-condensing) Heat Dissipation43 BTU/hrEnclosure ChassisMetal, black finish, vented top and sides Front PanelMetal, black finish with polycarbonate label overlay MountingFreestanding, under-table mountable, or 1RU half-width 19-inch rack-mountable (adhesive feet attached, under-table and rack mounting kits sold separately)Dimensions Height1.76 in (45 mm) Width7.07 in (180 mm) Depth8.75 in (223 mm)Weight 2.0 lb (0.9 kg)The ST-RMK Rack Mount Kit and UTK-1U-HALF Under-Table Mounting Kit are sold separately.The maximum cable length for DigitalMedia 8G Fiber (DM 8G Fiber) is 1000 ft (300 m) using Crestron CRESFIBER8G multimode fiber optic cable, or 500 ft (150 m) using Crestron legacy CRESFIBER, Crestron CRESFIBER-SINGLE-SC, or third-party OM3 simplex multimode fiber optic cable. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. All wire and cables are sold separately.The DisplayPort input only supports native DisplayPort signals. To connect an HDMI source to this input, an active HDMI-to-DisplayPort converter must be used.The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.The PC/RGB/VGA input can actually accept component, composite, and S-Video signals through an appropriate adapter (not included), or via direct interface to Crestron MPS Series products. However, input sync detection is not provided for composite or S-Video signal types through this connection.USB-EXT-DM USB over Ethernet Extender Modules are sold separately. Refer to the USB-EXT-DM spec sheet for more information.
Live search