Description
The DM?TX?201?C provides an interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® transmitter and switcher with HDMI®, VGA, and analog audio inputs along with Ethernet and USB HID ports for a total connectivity solution. Its low-profile, surface-mountable design makes the DM?TX?201?C ideal for installation beneath a conference table, inside a lectern or equipment rack, or at virtually any other location in a boardroom, classroom, auditorium, or residence. It connects to the head end or display location using a single CAT type twisted pair cable. In addition to DM 8G+, it is also compatible with HDBaseT® standard, which allows it to be connected directly to the input of an HDBaseT certified display device.1 Key Features DigitalMedia 8G+® transmitter and multimedia interface Built-in 2x1 AV switcher with auto-switching and analog audio-breakaway QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching Connects to a DM® switcher or receiver over a single CAT type twisted pair cable1 Supports cable lengths up to 330 ft (100 m) using DM 8G® cable or CAT5e1 HDBaseT® Certified standard — Enables direct connection to other HDBaseT certified equipment Handles video resolutions up to Full HD 1080p Handles computer resolutions up to WUXGA Handles Dolby Digital®, DTS®, and uncompressed 7.1 linear PCM audio HDCP compliant Performs automatic AV signal format management via EDID Enables device control via CEC and Ethernet Enables USB HID signal extension for a local computer Compatible with Crestron® USB over Ethernet Extenders6 Compatible with Crestron Connect It™ Cable Caddies7 Powered via the DM connection or optional power pack (sold separately)4,5 For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable or third-party CAT5e (or better) UTP or STP. (Crestron legacy DM-CBL DigitalMedia Cable or DM-CBL-D DigitalMedia D Cable may also be used.) The maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately. The HDMI connections can accommodate a DVI or Dual-Mode DisplayPort signal using an appropriate adapter or interface cable. CBL-HD-DVI interface cables are available separately. The RGB input can actually accept component, composite, and S-Video signals through an appropriate adapter (not included), or via direct interface to Crestron MPS Series products. However, input sync detection is not provided for composite or S-Video signal types through this connection. To power the DM?TX?201?C using PoDM (Power over DigitalMedia) requires connection to a DM switcher or other DigitalMedia equipment that has a PoDM PSE port. Wiring that connects to a PoDM PSE port is for intrabuilding use only. To power the DM?TX?201?C using HDBaseT PoE requires connection to a switcher or other equipment that has an HDBaseT PoE PSE port. Wiring that connects to a HDBaseT PoE PSE port is for intrabuilding use only USB over Ethernet Extender Modules are sold separately. Refer to the Crestron USB over Ethernet Extenders (USB?EXT?DM?LOCAL and USB?EXT?DM?REMOTE) and Crestron USB over Ethernet Network Wall Plate Endpoints (USB?NX2?LOCAL?1G and USB?NX2?REMOTE?1G) spec sheets for more information. The DM-TX-201-C has a USB device port, which does not supply USB power. When connected to a TT-100 series cable caddy (sold separately), the cable caddy must be powered separately through a connection to a Cresnet® network or power supply. Refer to the TT-100 spec sheet for more information. WARRANTY FREE SHIPPING FAST DISPATCH AUSTRALIAN SUPPORT SATISFACTION GUARANTEE Apple iMac Apple MacBook Cables & Adapters Desktop PCs Docking Stations & HubKeyboards & Mice Monitors VIEW ALL Crestron DM-TX-201-C-OB DigitalMedia 8G+® Transmitter 201 - New, Open Box $90.00--> DESCRIPTION The DM?TX?201?C provides an interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+® transmitter and switcher with HDMI®, VGA, and analog audio inputs along with Ethernet and USB HID ports for a total connectivity solution. Its low-profile, surface-mountable design makes the DM?TX?201?C ideal for installation beneath a conference table, inside a lectern or equipment rack, or at virtually any other location in a boardroom, classroom, auditorium, or residence. It connects to the head end or display location using a single CAT type twisted pair cable. In addition to DM 8G+, it is also compatible with HDBaseT® standard, which allows it to be connected directly to the input of an HDBaseT certified display device.1 Key Features DigitalMedia 8G+® transmitter and multimedia interface Built-in 2x1 AV switcher with auto-switching and analog audio-breakaway QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching Connects to a DM® switcher or receiver over a single CAT type twisted pair cable1 Supports cable lengths up to 330 ft (100 m) using DM 8G® cable or CAT5e1 HDBaseT® Certified standard — Enables direct connection to other HDBaseT certified equipment Handles video resolutions up to Full HD 1080p Handles computer resolutions up to WUXGA Handles Dolby Digital®, DTS®, and uncompressed 7.1 linear PCM audio HDCP compliant Performs automatic AV signal format management via EDID Enables device control via CEC and Ethernet Enables USB HID signal extension for a local computer Compatible with Crestron® USB over Ethernet Extenders6 Compatible with Crestron Connect It™ Cable Caddies7 Powered via the DM connection or optional power pack (sold separately)4,5 For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable or third-party CAT5e (or better) UTP or STP. (Crestron legacy DM-CBL DigitalMedia Cable or DM-CBL-D DigitalMedia D Cable may also be used.) The maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately. The HDMI connections can accommodate a DVI or Dual-Mode DisplayPort signal using an appropriate adapter or interface cable. CBL-HD-DVI interface cables are available separately. The RGB input can actually accept component, composite, and S-Video signals through an appropriate adapter (not included), or via direct interface to Crestron MPS Series products. However, input sync detection is not provided for composite or S-Video signal types through this connection. To power the DM?TX?201?C using PoDM (Power over DigitalMedia) requires connection to a DM switcher or other DigitalMedia equipment that has a PoDM PSE port. Wiring that connects to a PoDM PSE port is for intrabuilding use only. To power the DM?TX?201?C using HDBaseT PoE requires connection to a switcher or other equipment that has an HDBaseT PoE PSE port. Wiring that connects to a HDBaseT PoE PSE port is for intrabuilding use only USB over Ethernet Extender Modules are sold separately. Refer to the Crestron USB over Ethernet Extenders (USB?EXT?DM?LOCAL and USB?EXT?DM?REMOTE) and Crestron USB over Ethernet Network Wall Plate Endpoints (USB?NX2?LOCAL?1G and USB?NX2?REMOTE?1G) spec sheets for more information. The DM-TX-201-C has a USB device port, which does not supply USB power. When connected to a TT-100 series cable caddy (sold separately), the cable caddy must be powered separately through a connection to a Cresnet® network or power supply. Refer to the TT-100 spec sheet for more information. Specifications Features Whats Included Video Switcher 2x1 manual or auto-switching, Crestron QuickSwitch HD technology Input Signal Types HDMI (DVI & Dual-Mode DisplayPort™ compatible 2); VGA/RGB (RGBHV, RGBS, RGsB); component (YPbPr); S-Video (Y/C); composite (NTSC, PAL) 3 Output Signal Types DM 8G+ & HDBaseT, HDMI (DVI compatible 2) Resolutions, HDMI, Progressive 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165 MHz pixel clock Resolutions, HDMI, Interlaced 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165 MHz pixel clock Resolutions, RGB 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz Resolutions, Component 3 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60 Resolutions, Composite & S-Video 3 480i, 576i Analog-To-Digital Conversion 10-bit 165 MHz per each of 3 channels Audio Switcher 2x1 with auto-detecting digital/analog inputs and analog audio breakaway Input Signal Types HDMI (Dual-Mode DisplayPort compatible 2), analog stereo Output Signal Types DM 8G+ & HDBaseT, HDMI Digital Formats Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24,LPCM up to 8 channels Analog Formats Stereo 2-channel Analog-To-Digital Conversion 24-bit 48 kHz Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.75 dB S/N Ratio: >90 dB, 20 Hz to 20 kHz A-weighted THD+N: <0.05% @ 1 kHz Stereo Separation: >90 dB Communications Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP USB Supports signal extension of USB HID class devices, expandable to support virtually many USB 1.1 or 2.0 device using Crestron USB over Ethernet Extenders (USB?EXT?DM?LOCAL and USB?EXT?DM?REMOTE) and Crestron USB over Ethernet Network Wall Plate Endpoints (USB?NX2?LOCAL?1G and USB?NX2?REMOTE?1G) 6; supports a TT-100 series cable caddy 7 DigitalMedia DM 8G+, HDCP, EDID, CEC, PoDM Ethernet HDBaseT HDCP, EDID, PoE, Ethernet HDMI HDCP, EDID, CEC NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system. Connectors LAN (1) 8-pin shielded RJ-45, female; 10Base-T/100Base-TX Ethernet port DM OUT (1) 8-pin shielded RJ-45, female; DM 8G+ output, HDBaseT compliant; PoDM PD port (HDBaseT PoE compatible)4,5 ; Connects to the DM 8G+ input of a DM switcher, receiver/room controller, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM?CBL?8G cable1 HDMI OUT (1) 19-pin HDMI Type A, female; HDMI digital video/audio output (DVI compatible 2) PWR 24VDC 0.75A (1) 2.1 x 5.5 mm DC power connector; 24 VDC power input; PW?2407WU, optional power pack (sold separately) Ground (1) 6-32 screw; Chassis ground lug USB HID (1) USB Type B, female; USB 2.0 device host port for connection to the USB host interface of a computer or other USB HID-compliant host, or for connection of a Crestron TT-100 series device (Crestron Connect It) 7 HDMI IN (1) 19-pin HDMI Type A, female; HDMI digital video/audio input; (DVI & Dual-Mode DisplayPort compatible 2) RGB IN (1) HD15, female; Analog VGA/RGB/video input; Signal Types: VGA, RGB, component, S-Video, or composite 3; Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL; Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms; Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 1k Ohms AUDIO IN (1) 3.5 mm TRS mini phone jack; Unbalanced stereo line-level audio input; Input Level: 2 Vrms maximum; Input Impedance: 10k Ohms Controls & Indicators LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity DM OUT (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence PWR (1) Green LED, indicates operating power supplied via PoDM, HDBaseT PoE, or the optional PW?2407WU power pack (sold separately) HDMI IN (1) Green LED, indicates HDMI input is selected indicates RGB IN (1) Green LED, indicates RGB input is selected SETUP (1) Red LED and (1) recessed pushbutton for Ethernet setup RESET (1) Recessed pushbutton for hardware reset Power Power over DM (PoDM) IEEE 802.3at Type 1 Class 3 (12.95 W) compliant PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment) 4 Power over HDBaseT IEEE 802.3at Type 1 Class 3 (12.95 W) compliant HDBaseT PoE PD (Powered Device), capable of being powered by an HDBaseT PoE PSE (Power Sourcing Equipment) 5 Power pack (optional) Input: 100-240 VAC, 50/60 Hz Output: 0.75 A @ 24 VDC Model: PW?2407WU (sold separately) Environmental Temperature 32° to 104° F (0° to 40° C) Humidity 10% to 95% RH (non?condensing) Heat Dissipation 30 BTU/hr Enclosure Chassis Metal, black finish, with (2) integral mounting flanges, vented sides Mounting Freestanding, surface mount, or attach to a single rack rail Dimensions Height 6.47 in (165 mm) Width 7.36 in (187 mm) Depth 1.24 in (32 mm) Weight 25.4 oz (721 g) Tax Invoice WHY BUY FROM US ENVIRONMENT Buying refurbished isn’t just a great way to save money but a great way to do your bit for the environment. Optimising the life of electronics provides greater environmental gains to the environment including minimising the impact of eWaste on our planet. Buying refurbished equipment is a sustainable form of recycling. Your purchase has contributed minimising pollutions, limiting the use of raw materials in the manufacturing process and a significant cost saving to you. Together we are contributing to making a positive impact on the environment – Thank you! You have helped reduce the amount of carbon that is being released into the atmosphere – Thank you! You have also helped slow down the rate of consumption of exhaustible resources – The planet thanks you! OVER 20 YEARS OF EXPERIENCE With over 20 years experience and over 2 million (and counting) products processed. We have developed an enviable reputation for quality products, first class service and a no fuss approach to assisting customers. We continually strive to improve and grow our range of products and services for our customers. As a result we have evolved over the years to have specialised divisions within the ACT Group of companies WIDE RANGE OF PRODUCTS Were not just about computers, from humble beginnings weve grown to include all sorts of IT and commercial equipment. We offer a range of products and services including everything from Desktop Computers, LCDs, Laptops, Tough-books, Laser Printers, Office Multi-function Printers, Commercial Paper Shredders, Printer Plotters, Projectors, Servers, Other Network Equipment, IT Accessories, Toners and much much more. GREAT SERVICE We are famous for our service and recognised nationally as one of Australias largest and most respected suppliers of Ex-Government IT equipment and excess or surplus manufacturers stock. We put you, the customer first. with dedicated customer support agents, you can rest assure that if there is anything you need pre or post sale we are only a message away. ABOUT US PAYMENT DELIVERY / RETURNS WARRANTY Were not just about computers, from humble beginnings weve grown to include all sorts of IT and commercial equipment! We offer a range of products and services including everything from Desktop Computers, LCDs, Laptops, Tough-books, Laser Printers, Office Multi-function Printers, Commercial Paper Shredders, Printer Plotters, Projectors, Servers, Other Network Equipment, IT Accessories, Toners and much more. We are famous for our service and recognised nationally as one of Australias largest and most respected suppliers of Ex-Government IT equipment and excess or surplus manufacturers stock. We stock the worlds leading brands which include DELL, IBM, TOSHIBA, ACER, HP and APPLE. With over 20 years experience, we are an authorised dealer (License #11912) within the second-hand market. We have developed an enviable reputation for quality products, first class service and a no fuss approach to assisting customers. We continually strive to improve and grow our range of products and services for our customers. As a result we have evolved over the years to have specialised divisions within the ACT Group of companies: Australian Computer Traders - specialising in retail, business-to-business and export of refurbished IT Equipment. From this location we service customers from all over the world including, Australia, NZ, PNG, Asia and the Middle East with capability to distribute product anywhere in the world. We can supply one item or 40 foot containers....you choose. We accept PayPal Only Shipping Policy All of our Items are sent out of our East Brisbane Office or Our Warehouse. Items Bought and Paid for by 11am and generally sent same day. Returns & Warranty All Products are covered with a 6 Month RTB Standard warranty unless otherwise stated. Printer warranty does not cover consumables or mechanical ware and tear. All products are covered with a 180 days RTB warranty unless specified different Printer Warranty does not cover consumables or Mechanical Ware & Tear. Your customer satisfaction is important to us, if you have any issues please Contact us immediately Categories Home Add to Favourites Feedback General Links Apple iMac Apple MacBook Cables & Adapters Clearance Desktop PCs Docking Stations & HubsKeyboards & Mice Laptops Monitors Parts & Accessories Printers Projectors Scanners Toners Upgrades Other Newsletter Add us to your favourites to receive exclusive discounts and be kept upto date with our latest products and offers. SUBSCRIBE NOW © 2021 Australian Computer Traders, All Rights Reserved.
|
Crestron Media Transmitter wurde eine Zeit lang zur Übertragung von Bildsignalen auf einen Großmonitor verwendet. Zur Verwendung ist m.E. das Gegenstück notwendig. Mit Crestron Netzteil. Ohne Kabel.
Crestron DigitalMedia DM-TX-201-C Sender Transmittergebraucht, Ohne Netzteil !
ArtikelbeschreibungModell: DM-TX-201-C Hersteller: CrestronProdukt: DigitalMedia Sender Transmitter HDMI VGA AudioZubehör: keins nur StromkabelAnschlüsse: HDMI VGA USB MID AUDIO LANZustand: sehr gut!Optisch: normale Gebrauchsspuren sind vorhanden.Lieferumfang: das oben genannte Gerät so wie auf dem Bild zu sehen so Angebot. Umwelt Batterie-Verordnung Hinweise zur Entsorgung von Alt-BatterienDa wir Batterien und Akkus bzw. solche Geräte verkaufen, die Batterien und Akkus enthalten, sind wir nach dem Batteriegesetz (BattG) verpflichtet, Sie auf Folgendes hinzuweisen:Batterien und Akkus dürfen nicht im Hausmüll entsorgt werden, sondern Sie sind zur Rückgabe gebrauchter Batterien und Akkus gesetzlich verpflichtet. Altbatterien können Schadstoffe enthalten, die bei nicht sachgemäßer Lagerung oder Entsorgung die Umwelt oder Ihre Gesundheit schädigen können.Batterien enthalten aber auch wichtige Rohstoffe wie z.B. Eisen, Zink, Mangan oder Nickel und werden wieder verwertet. Sie können die Batterien nach Gebrauch entweder an uns zurücksenden oder in unmittelbarer Nähe (z.B. im Handel oder in kommunalen Sammelstellen) unentgeltlich zurückgegeben.Batterien oder Akkus, die Schadstoffe enthalten, sind mit dem Symbol einer durchgekreuzten Mülltonne gekennzeichnet.Die chemische Bezeichnung des Schadstoffes befindet sich in der Nähe des Symbols.Cd = Akku bzw. Batterie enthält mehr als 0,002 Prozent Cadmium Pb = Akku bzw. Batterie enthält mehr als 0,0005 Prozent Blei Hg = Akku bzw. Batterie enthält mehr als 0,004 Prozent Quecksilber Li = Akku bzw. Batterie enthält Lithium Ni = Akku bzw. Batterie enthält Nickel Zi = Akku bzw. Batterie enthält Zink Mh = Akku bzw. Batterie enthält MetallhydridSie finden diese Hinweise auch noch einmal in den Begleitpapieren der Warensendung oder in der Bedienungsanleitung des Herstellers. Enthält Schadstoffe. Nicht mit dem Hausmüll entsorgen!Unsere Lieferanten sind Ihrer Meldefrist beim Umweltbundesamt nachgekommen.Elektro- und Elektronikgeräte dürfen nicht über den Hausmüll entsorgt werden.Verbraucher können Ihre Elektro-Altgeräte kostenlos bei einer kommunalen Sammelstelle abgeben.
hier biete ich Crestron DM-TX-201-C + DigitalMedia 8G + Transmitter Multimedia-Schnittstelle + Netzteil
gebrauchte DigitalMedia HDBaseT Transmitter von Crestron DM-TX-201-C neueste Firmware installiert Lieferumfang: je 1 St. Crestron DM-TX-201-C ohne Netzteil Privatverkauf unter Ausschluß jeglicher Gewährleistung und Rücknahme. Die Angaben zu diesem Artikel wurden von mir wahrheitsgemäß nach bestem Wissen und Gewissen gemacht.
Live search