Conrad Johnson PV15 - Excellent Shape - Immaculate - One Owner. Original Box, Manual, and Remote included. Based in Indianapolis, IN. Tone Studio. SOURCES (TUNER, CD, VIDEO, AUX2): These high level inputs are electrically equivalent. These inputs present a 13.5 kOhm load to the source. Connect the corresponding source components to these inputs. PH/AUX1: If the optional phono stage is installed, this input pro- vides the extra gain and RIAA equalization required for playback of LPs. Otherwise, this serves as an additional line-level input. EPL: This set of line-level inputs and outputs provides for connec- tion of an external signal processor (e.g. parametric equalizer, tone controls) or a tape recorder. Connect the EPL OUT to the input of your signal processor or tape recorder, and the EPL IN to the out- put of your processor or tape recorder. Alternatively, the EPL IN connection can be used as an additional line level input. THEATER: This is an external processor loop designed to conven- iently accommodate the addition of a surround-sound processor (SSP) to a high-quality two-channel system without compromising two-channel performance. Connect the front left and front right channel outputs from your SSP to THEATER IN. You can also con- nect the THEATER OUT to an input on your SSP, allowing you to do signal processing on selected two channel sources. When THEATER is selected, the level controls are set and locked to unity gain. Level and balance control are then accomplished via your surround sound processor. MAIN OUT: Connect to the input of your amplifier (or crossover in a bi-amplified system). We recommend the use of an amplifier with an input impedance of 20k ohms or higher. Since the PV15 inverts phase, it may be necessary to invert the speaker leads to maintain correct absolute phase. See the section on “Getting the most out of your PV15 for an explanation. Line Stage Gain: 28.5 dB Maximum Output: 5.5 Vrms Bandpass: 2Hz to more than 100kHz Hum and Noise: 95 dB below 2.5V output Distortion at 1.0 V output: less than .1% THD or IMD Phase: inverts phase of all inputs (including phono) at main out Ouput Impedance: 200 ohms Mechanical Dimensions: 13.75D x 19W x 3.315H Net Weight: 15 lb net