You are bidding on a Classé SIGMA2200I is a high-quality stereo integrated amplifier with network audio player capabilities, including AirPlay functionality. It provides 2 channels of powerful amplification and is designed to offer premium audio performance. The amplifier operates on 120 USA power supply. It comes with the power cord & remote control. i do not have the original box but will pack it professionally with high density foam just like the safety of the OEM box, see my included photo. It is mint condition except for the rack rears where the screws tighten, see photos included. It is guaranteed to work perfectly and has a complete tune up done by Classe on 10/24/2023 then put straight into the box and has not been used since! Rare Opportunity!! Bid with confidence as I am A Square Trader with over 1600 sales and 23 years on ebay with 100% Positive Feedback I only Ship to PayPal verified addresses Check out my other auctions!! I have other collectables & watches Here are some specifications for the Classé Sigma 2200i stereo integrated amplifier: Frequency response: 10 Hz–20 kHz, -1 dB into 4 ?Output power: 2 x 200 W rms into 8 ?, 2 x 400 W rms into 4 ?Harmonic distortion: 0.018% at 1 kHz, both channels driven to 1/8th power into 4 ?Maximum input level: 2 Vrms single-ended, 4 Vrms balancedMaximum output level: 113 V peak to peak, 40 V rmsGain range -93 dB to +14 dBInput impedance: 50 k ? single-ended, 100 k ? balancedSignal-to-noise ratio: 97 dBUSB audio: Up to 24-bit/192 kHzDimensions: 17 in wide, 14.57 in deep, 5.5 in highNet weight: 26.7 lbRated power consumption: 185 WMains voltage: 90–264 V, 50/60 HzThe Sigma 2200i also has an Ethernet connector for Apple AirPlay or DLNA, and an IR input and output. It has four HDMI (v. 2.0) inputs and one HDMI output.

You are bidding on a Classé SIGMA2200I is a high-quality stereo integrated amplifier with network audio player capabilities, including AirPlay functionality. It provides 2 channels of powerful amplification and is designed to offer premium audio performance. The amplifier operates on 120 USA power supply. It comes with the power cord & remote control. i do not have the original box but will pack it professionally with high density foam just like the safety of the OEM box, see my included photo. It is mint condition except for the rack rears where the screws tighten, see photos included. It is guaranteed to work perfectly and has a complete tune up done by Classe on 10/24/2023 then put straight into the box and has not been used since! Rare Opportunity!! Bid with confidence as I am A Square Trader with over 1600 sales and 23 years on ebay with 100% Positive Feedback I only Ship to PayPal verified addresses Check out my other auctions!! I have other collectables & watches Here are some specifications for the Classé Sigma 2200i stereo integrated amplifier: Frequency response: 10 Hz–20 kHz, -1 dB into 4 ?Output power: 2 x 200 W rms into 8 ?, 2 x 400 W rms into 4 ?Harmonic distortion: 0.018% at 1 kHz, both channels driven to 1/8th power into 4 ?Maximum input level: 2 Vrms single-ended, 4 Vrms balancedMaximum output level: 113 V peak to peak, 40 V rmsGain range -93 dB to +14 dBInput impedance: 50 k ? single-ended, 100 k ? balancedSignal-to-noise ratio: 97 dBUSB audio: Up to 24-bit/192 kHzDimensions: 17 in wide, 14.57 in deep, 5.5 in highNet weight: 26.7 lbRated power consumption: 185 WMains voltage: 90–264 V, 50/60 HzThe Sigma 2200i also has an Ethernet connector for Apple AirPlay or DLNA, and an IR input and output. It has four HDMI (v. 2.0) inputs and one HDMI output.

You are bidding on a Classé SIGMA2200I is a high-quality stereo integrated amplifier with network audio player capabilities, including AirPlay functionality. It provides 2 channels of powerful amplification and is designed to offer premium audio performance. The amplifier operates on 120 USA power supply. It comes with the power cord & remote control. i do not have the original box but will pack it professionally with high density foam just like the safety of the OEM box, see my included photo. It is mint condition except for the rack rears where the screws tighten, see photos included. It is guaranteed to work perfectly and has a complete tune up done by Classe on 10/24/2023 then put straight into the box and has not been used since! Rare Opportunity!! Bid with confidence as I am A Square Trader with over 1600 sales and 23 years on ebay with 100% Positive Feedback I only Ship to PayPal verified addresses Check out my other auctions!! I have other collectables & watches Here are some specifications for the Classé Sigma 2200i stereo integrated amplifier: Frequency response: 10 Hz–20 kHz, -1 dB into 4 ?Output power: 2 x 200 W rms into 8 ?, 2 x 400 W rms into 4 ?Harmonic distortion: 0.018% at 1 kHz, both channels driven to 1/8th power into 4 ?Maximum input level: 2 Vrms single-ended, 4 Vrms balancedMaximum output level: 113 V peak to peak, 40 V rmsGain range -93 dB to +14 dBInput impedance: 50 k ? single-ended, 100 k ? balancedSignal-to-noise ratio: 97 dBUSB audio: Up to 24-bit/192 kHzDimensions: 17 in wide, 14.57 in deep, 5.5 in highNet weight: 26.7 lbRated power consumption: 185 WMains voltage: 90–264 V, 50/60 HzThe Sigma 2200i also has an Ethernet connector for Apple AirPlay or DLNA, and an IR input and output. It has four HDMI (v. 2.0) inputs and one HDMI output.

You are bidding on a Classé SIGMA2200I is a high-quality stereo integrated amplifier with network audio player capabilities, including AirPlay functionality. It provides 2 channels of powerful amplification and is designed to offer premium audio performance. The amplifier operates on 120 USA power supply. It comes with the power cord & remote control. i do not have the original box but will pack it professionally with high density foam just like the safety of the OEM box, see my included photo. It is mint condition except for the rack rears where the screws tighten, see photos included. It is guaranteed to work perfectly and has a complete tune up done by Classe on 10/24/2023 then put straight into the box and has not been used since! Rare Opportunity!! Bid with confidence as I am A Square Trader with over 1600 sales and 23 years on ebay with 100% Positive Feedback I only Ship to PayPal verified addresses Check out my other auctions!! I have other collectables & watches Here are some specifications for the Classé Sigma 2200i stereo integrated amplifier: Frequency response: 10 Hz–20 kHz, -1 dB into 4 ?Output power: 2 x 200 W rms into 8 ?, 2 x 400 W rms into 4 ?Harmonic distortion: 0.018% at 1 kHz, both channels driven to 1/8th power into 4 ?Maximum input level: 2 Vrms single-ended, 4 Vrms balancedMaximum output level: 113 V peak to peak, 40 V rmsGain range -93 dB to +14 dBInput impedance: 50 k ? single-ended, 100 k ? balancedSignal-to-noise ratio: 97 dBUSB audio: Up to 24-bit/192 kHzDimensions: 17 in wide, 14.57 in deep, 5.5 in highNet weight: 26.7 lbRated power consumption: 185 WMains voltage: 90–264 V, 50/60 HzThe Sigma 2200i also has an Ethernet connector for Apple AirPlay or DLNA, and an IR input and output. It has four HDMI (v. 2.0) inputs and one HDMI output.

Classe Sigma Amp5 5 x x 200w @ 8Ohms all channels driven (400w @ 4Ohms any 2 channels driven.) Very good clean condition, just minor scratches on the top. Very low noise floor. Comes with original power cord, manuals and original USB drive. This is the best Classe Sigma Amp5 for sale anywhere!

This is a Classe Sigma Amp5 with remote, manual and box. It was rack mounted so from the front there are no blemishes. The sides and top may have some. I can take more pics if needed. I am listing another amp just like it so if you want both let me know and we can work a deal. I used these to power a B&W 802D system bi-amped and it sounded incredible. I had multiple fans on the amps sucking and blowing the heat off, they were spaced out and very well taken care of. InformationThe Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages.A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes.

This is a Classe Sigma Amp5 with remote, manual and box. It was rack mounted so from the front there are no blemishes. The sides and top may have some. I can take more pics if needed. I am listing another amp just like it so if you want both let me know and we can work a deal. I used these to power a B&W 802D system bi-amped and it sounded incredible. I had multiple fans on the amps sucking and blowing the heat off, they were spaced out and very well taken care of. InformationThe Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages.A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes.

This is a Classe Sigma Amp5 with remote, manual and box. It was rack mounted so from the front there are no blemishes. The sides and top may have some. I can take more pics if needed. I am listing another amp just like it so if you want both let me know and we can work a deal. I used these to power a B&W 802D system bi-amped and it sounded incredible. I had multiple fans on the amps sucking and blowing the heat off, they were spaced out and very well taken care of. InformationThe Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages.A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes.

This is a Classe Sigma Amp5 with remote, manual and box. It was rack mounted so from the front there are no blemishes. The sides and top may have some. I can take more pics if needed. I am listing another amp just like it so if you want both let me know and we can work a deal. I used these to power a B&W 802D system bi-amped and it sounded incredible. I had multiple fans on the amps sucking and blowing the heat off, they were spaced out and very well taken care of. InformationThe Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages.A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes.

This is a Classe Sigma Amp5 with remote, manual and box. It was rack mounted so from the front there are no blemishes. The sides and top may have some. I can take more pics if needed. I am listing another amp just like it so if you want both let me know and we can work a deal. I used these to power a B&W 802D system bi-amped and it sounded incredible. I had multiple fans on the amps sucking and blowing the heat off, they were spaced out and very well taken care of. InformationThe Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages.A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes.

This is a Classe Sigma Amp5 with remote, manual and box. It was rack mounted so from the front there are no blemishes. The sides and top may have some. I can take more pics if needed. I am listing another amp just like it so if you want both let me know and we can work a deal. I used these to power a B&W 802D system bi-amped and it sounded incredible. I had multiple fans on the amps sucking and blowing the heat off, they were spaced out and very well taken care of. InformationThe Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages.A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes.

This is a Classe Sigma Amp5 with remote, manual and box. It was rack mounted so from the front there are no blemishes. The sides and top may have some. I can take more pics if needed. I am listing another amp just like it so if you want both let me know and we can work a deal. I used these to power a B&W 802D system bi-amped and it sounded incredible. I had multiple fans on the amps sucking and blowing the heat off, they were spaced out and very well taken care of. InformationThe Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages.A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes.

This is a Classe Sigma Amp5 with remote, manual and box. It was rack mounted so from the front there are no blemishes. The sides and top may have some. I can take more pics if needed. I am listing another amp just like it so if you want both let me know and we can work a deal. I used these to power a B&W 802D system bi-amped and it sounded incredible. I had multiple fans on the amps sucking and blowing the heat off, they were spaced out and very well taken care of. InformationThe Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages.A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes.

This is a Classe Sigma Amp5 with remote, manual and box. It was rack mounted so from the front there are no blemishes. The sides and top may have some. I can take more pics if needed. I am listing another amp just like it so if you want both let me know and we can work a deal. I used these to power a B&W 802D system bi-amped and it sounded incredible. I had multiple fans on the amps sucking and blowing the heat off, they were spaced out and very well taken care of. InformationThe Sigma series AMP5 is a 200W/Ch five-channel amplifier derived from the AMP2, but with necessary part and layout changes to accommodate its five-channel architecture. Like the AMP2, it utilizes switching technologies for both power supply and amplification stages.A Classé-designed switch mode power supply with Power Factor Correction makes over 1,000W of clean and stable power available while being both compact and efficient. A new class D amplifier topology provides wide dynamic range, smooth and extended frequency response and rich harmonic detail to yield stunning sonic performance. The efficiency of class D adds efficiency, low heat dissipation and relatively small size to the list of the AMP5’s attributes.