Item Description Condition : USED Very Good Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

THE CHORD COMPANY Signature Tuned ARAY XLR cable 1.0m

DescriptionAuthenticity: 100% AUTHENTIC! If you have any question about the condition, accessories, or anything about the product,Please feel free to message us. We are glad to answer all your concerns. ShippingDHL, Fedex Fastshipping3-10 business days after shipment(Tracking number + Insurance.)PaymentPlease give me the payment within 3days from the date of bid.About UsWe sell our items on other websites and in our retail stores in Japan at the same time.If the item was sold out before your purchase, your order will be cancelled and a full refund will be issued immediately. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you.

Item TitleThe Chord Company Signature X Tuned Aray XLR Audio Cable 1m High Quality Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

Item Description Chord Company Signature 9m XLR Cables - UK Chord Company Dealer - RRP £7500 These are our ex demonstration pair. Supplied without original packaging and shipped via FREE fully insured courier service. All accessories are pictured. Please note any warranty offered is UK warranty only, warranty is not transferable outside of the UK. Free DeliveryWe offer free delivery anywhere in Mainland UK.Fully insured for your peace of mind.International CustomersWe are happy to ship outside the UK on some of our listings.If shipping has not been quoted by eBay through its GSP (Global Shipping Programme) please contact us for a quote. Thanks.Returns PolicyWe want you to be happy with your purchase. If you wish to return an item, please contact us within 14 days to obtain a returns reference.The item must be in the same condition as you received it - including all packaging.Contact UsThe Audiobarn2 Feltimores ParkOld HarlowEssex CM17 0PFTel: 01279 454 860www.theaudiobarn.co.ukRegistered Company No. 9309546VAT No. GB 202 0625 71

Chord Signature Tuned Aray 2xlr - 2xlr 1m Length Ex-Demo cable. Supplied in original packaging and in excellent condition (see pics) Any questions please ask.

Chord Signature Tuned Aray 2 XLR to 2 XLR Audio Cable Pair - 2m, RRP £2000 Ex-demo, used 5 times. Full warranty Hifonix - Authorised Chord Company dealer Free UK delivery

Chord Signature XL Speaker Cables 2 x 2.5m Pair RRP £1750. Chord Company Signature XL Speaker Cables 2 x 2.5 meters (Pair) Factory Terminated, and is in excellent condition. See all the photos for condition details. Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chord's first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list. It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference. Signature Reference, like most of Chord's cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chord's “go to” material. Although expensive, it offered the best performance. Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference. Specification : Quantity 2 x 2.5 meters pair. Conductors: Silver-plated, high purity OFC Configuration: Twisted pair Conductor Insulation: XLPE Shielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacket AWG: 10 mm2: 5.26 Diameter: 2 x 8.5mm Colour: black

Chord Signature XL Speaker Cables 2 x 2.5m Pair RRP £1750. Chord Company Signature XL Speaker Cables 2 x 2.5 meters (Pair) Factory Terminated, and is in excellent condition. See all the photos for condition details. Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chord's first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list. It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference. Signature Reference, like most of Chord's cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chord's “go to” material. Although expensive, it offered the best performance. Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference. Specification : Quantity 2 x 2.5 meters pair. Conductors: Silver-plated, high purity OFC Configuration: Twisted pair Conductor Insulation: XLPE Shielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacket AWG: 10 mm2: 5.26 Diameter: 2 x 8.5mm Colour: black

Item Description Chord Company Signature Tuned ARAY 2XLR - 2XLR 2.5M Cables - UK Chord Dealer - 50% Off Excellent overall condition, these are our ex demonstration cables. Supplied in original packaging and shipped via FREE fully insured courier service. Please note any warranty offered is UK warranty only, warranty is not transferable outside of the UK. Free DeliveryWe offer free delivery anywhere in Mainland UK.Fully insured for your peace of mind.International CustomersWe are happy to ship outside the UK on some of our listings.If shipping has not been quoted by eBay through its GSP (Global Shipping Programme) please contact us for a quote. Thanks.Returns PolicyWe want you to be happy with your purchase. If you wish to return an item, please contact us within 14 days to obtain a returns reference.The item must be in the same condition as you received it - including all packaging.Contact UsThe Audiobarn2 Feltimores ParkOld HarlowEssex CM17 0PFTel: 01279 454 860www.theaudiobarn.co.ukRegistered Company No. 9309546VAT No. GB 202 0625 71

Normal 0 false false false EN-GB X-NONE X-NONE CHORD SIGNATURE TUNED ARAY XLR CABLES, 1 METRE, TRADE-IN, BOXED, AUTHORISED DEALER! At HiFi Lounge we are pleased to be offering these Chord Signature Tuned Aray Stereo XLR Cables that are a customer trade-in and were bought from us originally in 2020 and are in excellent condition, 1 owner from new, around 300 hours use.We have 2 boxed pairs available, 1 Metre each pair. We are an Authorised Chord Cables HI-FI DEALER so buy please with confidence.New Price - £1500 a pair.Our Price - £599 a pair. FREE DELIVERY OR COLLECTION AVAILABLE We are based near Biggleswade, Bedfordshire. This can be viewed at our demo rooms in Bedfordshire, so please feel free to come and have a listen, if you could just ring first that would be much appreciated. Hifi Lounge are offering something a little different in hifi sales, based in a stunning converted granary, there are no pressure sales, we only sell the brands we believe in and always put the customer first. We are specialists in CHORD, PMC, ISOL-8, Bryston, Naim, Devialet, Arcam, Musical Fidelity, Rega, Heed, OPPO, Sonus Faber, Martin Logan and Spendor amongst others + We have a range of some of the best headphones available today in our dedicated headphone shop called Highend Headphones from brands like HiFiMan, Audeze, Fostex, Stax, Grado, Sennheiser, Ultrasone, Abyss, Audio Technica and Beyerdynamic, please check our website for more details. Please check our Ex-Display/Pre-loved page on our website for great prices on ex-display, nearly new equipment and pre-Owned from the best HiFi Brands. Also please check our other items for sale on ebay, we only sell high quality products in excellent condition. Thanks for looking!

Chord Signature Tuned Aray 4DIN-XLR (for Naim NAP250). Current model, RRP £1250 Traded in with a Naim NAP250DR following upgrade to new Naim amplification, this example of Chords 4pin DIN to single XLR Signature interconnect is in as new condition with little visible wear on both plugs. Offered complete with original box. This interconnect offers a significant upgrade in performance over the standard cable supplied with any pre-6th generation NAP250. Collection is welcome from our showroom on the outskirts of Cambridge, which is easily accessed from all major routes and has ample free parking onsite. International bidders: please establish if this item is eligible for eBays Global Shipping Program (GSP) by visiting the Postage and Payments section of this listing - here you will also find details of the international shipping fees and any duty that will be payable. If your country is not listed we may still be able to send the item to you, but please contact us for a delivery quotation before bidding. UK Shipping is tracked and insured using Parcelforce. Please get in touch with any questions using the Contact Seller button in the Seller Information box. Criterion Audio are authorised Chord stockists. Our historyEstablished in 2014 and expanded in 2020 with a purpose-built extension featuring two new audio-focused demonstration rooms, Criterion Audio Ltd operates one of the UKs finest hi-fi showrooms. Situated 3 miles from the centre of Cambridge to the northwest in the quiet village of Girton, we specialise in 2-channel audio: from vinyl to streaming, with carefully selected components from the UK and around the world. We have 3 luxurious purpose-built listening rooms where you can experience some of the finest audio equipment available today in comfortable surroundings. Home demonstrations and an installation service are also available along with our easy to use online store, and we also offer part-exchange on all of our equipment.Mike, Andrew and Dave, our friendly staff, have over 30 years-experience in the audio industry and offer expert advice, whether you are starting your audio journey for the first time or you are experienced in the hobby and on the upgrade path. Easy parking directly outside and with easy access from all major routes, we invite you to sit back, relax and enjoy a tea or coffee in one of our comfortable demonstration rooms to enjoy your audio journey.We are specialists in Linn LP12 servicing and upgrades, and our staff have many years of experience looking after this iconic turntable.We are open 6 days a week, Monday to Saturday from 10:00 am to 5:30 pm. Sundays or bank holidays can be booked by arrangement. Please use our contact form or call us on 01223 233730.

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition, one banana little bent but still good. See all the photos for condition details. RRP £1400 Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chord's first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list. It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference. Signature Reference, like most of Chord's cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chord's “go to” material. Although expensive, it offered the best performance. Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference. Specification : Quantity 2x2 meters pair Conductors: Silver-plated, high purity OFC Configuration: Twisted pair Conductor Insulation: XLPE Shielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacket AWG: 10 mm2: 5.26 Diameter: 2 x 8.5mm Colour: black

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition, one banana little bent but still good. See all the photos for condition details. RRP £1400 Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chord's first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list. It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference. Signature Reference, like most of Chord's cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chord's “go to” material. Although expensive, it offered the best performance. Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference. Specification : Quantity 2x2 meters pair Conductors: Silver-plated, high purity OFC Configuration: Twisted pair Conductor Insulation: XLPE Shielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacket AWG: 10 mm2: 5.26 Diameter: 2 x 8.5mm Colour: black

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition, one banana little bent but still good.See all the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition, one banana little bent but still good.See all the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition, one banana little bent but still good.See all the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition, one banana little bent but still good.See all the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition.See the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition.See the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Chord Company Signature XL AUDIO SPEAKER CABLES 2x 2.5m Pair Factory Terminated. Chord Company Signature XL AUDIO SPEAKER CABLES 2x 2.5m Pair Factory Terminated Welcome to my listing Fantastic condition, but have since upgraded so need to move this on to a good home. Main colour: Black/ Grey No defects to speak of and cables perform perfectly and would be a great upgrade to and system. Item comes wrapped and pack suitable for delivery. For more detailed spec on this item please visit the CHORD website. For UK Sale ONLY No Returns on this item

Chord Signature Super Array AES/EBU XLR - XLR 1m cable. Chord Signature Super Array AES/EBU XLR - XLR 1m cable unused in perfect condition with all packaging . As new . RRP £1,000Price £700