Canary Audio vacuum tube preamplifier Dual Mono CA-801L with separate power supply CA-801P. One of the best sets of Preamplifiers available. This Vacuum Tube Preamp and vacuum tube power supply are like new - only used for less than 12 hours total. These are a demo pair with about 12 hours on them. Retail on these top of these is $14,999. Once you hear this Preamplifier, you will stop looking for the next best thing--you will already have it! Canary Audio are already a legend throughout Asia and England. Left and right channels are completely separated. DESCRIPTION The circuitry components used in the CA-801 Signature Edition are carefully chosen and hand soldered on the military grade epoxy circuit boards. Only pure silver/Teflon coaxial cables were used for routing between the jacks and the gold plated ELMA rotary switch. The volume control being used is a 24-positions stepped attenuator hand built by our engineers. Even the DC power cables used to connect the line stages to the power supplies were built. SPECIFICATIONS Model: CA-801 Signature Edition Input Impedance: 50,000 Ohms min 100,000 Ohms max Output Impedance: 1,200 Ohms Maximum Gain: 12.3 dB Frequency Response: +/- 1 dB from 8 Hz to 78,500 Hz Hum and Noise: -86 dB Maximum Output Voltage before clipping: 30V Total Harmonic Distortion: < 0.02% Power Consumption (both channels): 66 Watts (true RMS) Tube Complement - CA-801-L: 2-12AX7/ECC83 2-12AU7/ECC82 Tube Complement - CA-801-P: 2-EF86 2-12BH7 Dimensions - CA-801-L: 19” W x 15” D x 4.75” H Dimensions - CA-801-P: 19” W x 15” D x 4.75” H Weight - CA-801-L: 23 lbs. Weight - CA-801-P: 34 lbs. These are perfect in every way. Not a single blemish (no scratches, nicks, dings or anything internal or external). All the corners and sides on every aluminum face plate, rear plate, top plate and chassis are perfect...no dings, scratch, nick, blemish or stories whatsoever. Even the base is perfect. I am very particular and feel for machining imperfections and on top and bottom - there just are none. Very beautiful Pewter blue/gray color anodized. Great for Horn Speakers. ***2 high quality AC power cord and 2 Canary DC connectors are also included*** OF WORTHY NOTE: This is the same OEM that designed and builds the current $124,999.00 Western Electric Monoblock Amplifiers (not a typo). See: https://www.westernelectric.com/97a-monoblock-amplifiers These Canary Audio amplifiers and preamplifiers use the same components, hardware, wiring, capacitors etc. Even the machine shop and metal stamping, silkscreen as well as the anodizing facilities. The thick aluminum plates and chassis panels, boards are the very same. Best of all it is all made here in the USA. Note: Canary CA-303 MonoBlock amplifiers on both sides not included (see my other listings).

Canary Audio vacuum tube preamplifier Dual Mono CA-801L with separate power supply CA-801P. One of the best sets of Preamplifiers available. This Vacuum Tube Preamp and vacuum tube power supply are like new - only used for less than 12 hours total. These are a demo pair with about 12 hours on them. Retail on these top of these is $14,999. Once you hear this Preamplifier, you will stop looking for the next best thing--you will already have it! Canary Audio are already a legend throughout Asia and England. Left and right channels are completely separated. DESCRIPTION The circuitry components used in the CA-801 Signature Edition are carefully chosen and hand soldered on the military grade epoxy circuit boards. Only pure silver/Teflon coaxial cables were used for routing between the jacks and the gold plated ELMA rotary switch. The volume control being used is a 24-positions stepped attenuator hand built by our engineers. Even the DC power cables used to connect the line stages to the power supplies were built. SPECIFICATIONS Model: CA-801 Signature Edition Input Impedance: 50,000 Ohms min 100,000 Ohms max Output Impedance: 1,200 Ohms Maximum Gain: 12.3 dB Frequency Response: +/- 1 dB from 8 Hz to 78,500 Hz Hum and Noise: -86 dB Maximum Output Voltage before clipping: 30V Total Harmonic Distortion: < 0.02% Power Consumption (both channels): 66 Watts (true RMS) Tube Complement - CA-801-L: 2-12AX7/ECC83 2-12AU7/ECC82 Tube Complement - CA-801-P: 2-EF86 2-12BH7 Dimensions - CA-801-L: 19” W x 15” D x 4.75” H Dimensions - CA-801-P: 19” W x 15” D x 4.75” H Weight - CA-801-L: 23 lbs. Weight - CA-801-P: 34 lbs. These are perfect in every way. Not a single blemish (no scratches, nicks, dings or anything internal or external). All the corners and sides on every aluminum face plate, rear plate, top plate and chassis are perfect...no dings, scratch, nick, blemish or stories whatsoever. Even the base is perfect. I am very particular and feel for machining imperfections and on top and bottom - there just are none. Very beautiful Pewter blue/gray color anodized. Great for Horn Speakers. ***2 high quality AC power cord and 2 Canary DC connectors are also included*** OF WORTHY NOTE: This is the same OEM that designed and builds the current $124,999.00 Western Electric Monoblock Amplifiers (not a typo). See: https://www.westernelectric.com/97a-monoblock-amplifiers These Canary Audio amplifiers and preamplifiers use the same components, hardware, wiring, capacitors etc. Even the machine shop and metal stamping, silkscreen as well as the anodizing facilities. The thick aluminum plates and chassis panels, boards are the very same. Best of all it is all made here in the USA. Note: Canary CA-303 MonoBlock amplifiers on both sides not included (see my other listings).

Canary Audio vacuum tube preamplifier Dual Mono CA-801L with separate power supply CA-801P. One of the best sets of Preamplifiers available. This Vacuum Tube Preamp and vacuum tube power supply are like new - only used for less than 12 hours total. These are a demo pair with about 12 hours on them. Retail on these top of these is $14,999. Once you hear this Preamplifier, you will stop looking for the next best thing--you will already have it! Canary Audio are already a legend throughout Asia and England. Left and right channels are completely separated. DESCRIPTION The circuitry components used in the CA-801 Signature Edition are carefully chosen and hand soldered on the military grade epoxy circuit boards. Only pure silver/Teflon coaxial cables were used for routing between the jacks and the gold plated ELMA rotary switch. The volume control being used is a 24-positions stepped attenuator hand built by our engineers. Even the DC power cables used to connect the line stages to the power supplies were built. SPECIFICATIONS Model: CA-801 Signature Edition Input Impedance: 50,000 Ohms min 100,000 Ohms max Output Impedance: 1,200 Ohms Maximum Gain: 12.3 dB Frequency Response: +/- 1 dB from 8 Hz to 78,500 Hz Hum and Noise: -86 dB Maximum Output Voltage before clipping: 30V Total Harmonic Distortion: < 0.02% Power Consumption (both channels): 66 Watts (true RMS) Tube Complement - CA-801-L: 2-12AX7/ECC83 2-12AU7/ECC82 Tube Complement - CA-801-P: 2-EF86 2-12BH7 Dimensions - CA-801-L: 19” W x 15” D x 4.75” H Dimensions - CA-801-P: 19” W x 15” D x 4.75” H Weight - CA-801-L: 23 lbs. Weight - CA-801-P: 34 lbs. These are perfect in every way. Not a single blemish (no scratches, nicks, dings or anything internal or external). All the corners and sides on every aluminum face plate, rear plate, top plate and chassis are perfect...no dings, scratch, nick, blemish or stories whatsoever. Even the base is perfect. I am very particular and feel for machining imperfections and on top and bottom - there just are none. Very beautiful Pewter blue/gray color anodized. Great for Horn Speakers. ***2 high quality AC power cord and 2 Canary DC connectors are also included*** OF WORTHY NOTE: This is the same OEM that designed and builds the current $124,999.00 Western Electric Monoblock Amplifiers (not a typo). See: https://www.westernelectric.com/97a-monoblock-amplifiers These Canary Audio amplifiers and preamplifiers use the same components, hardware, wiring, capacitors etc. Even the machine shop and metal stamping, silkscreen as well as the anodizing facilities. The thick aluminum plates and chassis panels, boards are the very same. Best of all it is all made here in the USA. Note: Canary CA-303 MonoBlock amplifiers on both sides not included (see my other listings).

Canary Audio vacuum tube preamplifier Dual Mono CA-801L with separate power supply CA-801P. One of the best sets of Preamplifiers available. This Vacuum Tube Preamp and vacuum tube power supply are like new - only used for less than 12 hours total. These are a demo pair with about 12 hours on them. Retail on these top of these is $14,999. Once you hear this Preamplifier, you will stop looking for the next best thing--you will already have it! Canary Audio are already a legend throughout Asia and England. Left and right channels are completely separated. DESCRIPTION The circuitry components used in the CA-801 Signature Edition are carefully chosen and hand soldered on the military grade epoxy circuit boards. Only pure silver/Teflon coaxial cables were used for routing between the jacks and the gold plated ELMA rotary switch. The volume control being used is a 24-positions stepped attenuator hand built by our engineers. Even the DC power cables used to connect the line stages to the power supplies were built. SPECIFICATIONS Model: CA-801 Signature Edition Input Impedance: 50,000 Ohms min 100,000 Ohms max Output Impedance: 1,200 Ohms Maximum Gain: 12.3 dB Frequency Response: +/- 1 dB from 8 Hz to 78,500 Hz Hum and Noise: -86 dB Maximum Output Voltage before clipping: 30V Total Harmonic Distortion: < 0.02% Power Consumption (both channels): 66 Watts (true RMS) Tube Complement - CA-801-L: 2-12AX7/ECC83 2-12AU7/ECC82 Tube Complement - CA-801-P: 2-EF86 2-12BH7 Dimensions - CA-801-L: 19” W x 15” D x 4.75” H Dimensions - CA-801-P: 19” W x 15” D x 4.75” H Weight - CA-801-L: 23 lbs. Weight - CA-801-P: 34 lbs. These are perfect in every way. Not a single blemish (no scratches, nicks, dings or anything internal or external). All the corners and sides on every aluminum face plate, rear plate, top plate and chassis are perfect...no dings, scratch, nick, blemish or stories whatsoever. Even the base is perfect. I am very particular and feel for machining imperfections and on top and bottom - there just are none. Very beautiful Pewter blue/gray color anodized. Great for Horn Speakers. ***2 high quality AC power cord and 2 Canary DC connectors are also included*** OF WORTHY NOTE: This is the same OEM that designed and builds the current $124,999.00 Western Electric Monoblock Amplifiers (not a typo). See: https://www.westernelectric.com/97a-monoblock-amplifiers These Canary Audio amplifiers and preamplifiers use the same components, hardware, wiring, capacitors etc. Even the machine shop and metal stamping, silkscreen as well as the anodizing facilities. The thick aluminum plates and chassis panels, boards are the very same. Best of all it is all made here in the USA. Note: Canary CA-303 MonoBlock amplifiers on both sides not included (see my other listings).

Canary Audio vacuum tube preamplifier Dual Mono CA-801L with separate power supply CA-801P. One of the best sets of Preamplifiers available. This Vacuum Tube Preamp and vacuum tube power supply are like new - only used for less than 12 hours total. These are a demo pair with about 12 hours on them. Retail on these top of these is $14,999. Once you hear this Preamplifier, you will stop looking for the next best thing--you will already have it! Canary Audio are already a legend throughout Asia and England. Left and right channels are completely separated. DESCRIPTION The circuitry components used in the CA-801 Signature Edition are carefully chosen and hand soldered on the military grade epoxy circuit boards. Only pure silver/Teflon coaxial cables were used for routing between the jacks and the gold plated ELMA rotary switch. The volume control being used is a 24-positions stepped attenuator hand built by our engineers. Even the DC power cables used to connect the line stages to the power supplies were built. SPECIFICATIONS Model: CA-801 Signature Edition Input Impedance: 50,000 Ohms min 100,000 Ohms max Output Impedance: 1,200 Ohms Maximum Gain: 12.3 dB Frequency Response: +/- 1 dB from 8 Hz to 78,500 Hz Hum and Noise: -86 dB Maximum Output Voltage before clipping: 30V Total Harmonic Distortion: < 0.02% Power Consumption (both channels): 66 Watts (true RMS) Tube Complement - CA-801-L: 2-12AX7/ECC83 2-12AU7/ECC82 Tube Complement - CA-801-P: 2-EF86 2-12BH7 Dimensions - CA-801-L: 19” W x 15” D x 4.75” H Dimensions - CA-801-P: 19” W x 15” D x 4.75” H Weight - CA-801-L: 23 lbs. Weight - CA-801-P: 34 lbs. These are perfect in every way. Not a single blemish (no scratches, nicks, dings or anything internal or external). All the corners and sides on every aluminum face plate, rear plate, top plate and chassis are perfect...no dings, scratch, nick, blemish or stories whatsoever. Even the base is perfect. I am very particular and feel for machining imperfections and on top and bottom - there just are none. Very beautiful Pewter blue/gray color anodized. Great for Horn Speakers. ***2 high quality AC power cord and 2 Canary DC connectors are also included*** OF WORTHY NOTE: This is the same OEM that designed and builds the current $124,999.00 Western Electric Monoblock Amplifiers (not a typo). See: https://www.westernelectric.com/97a-monoblock-amplifiers These Canary Audio amplifiers and preamplifiers use the same components, hardware, wiring, capacitors etc. Even the machine shop and metal stamping, silkscreen as well as the anodizing facilities. The thick aluminum plates and chassis panels, boards are the very same. Best of all it is all made here in the USA. Note: Canary CA-303 MonoBlock amplifiers on both sides not included (see my other listings).

Follow us| Sign up for our newsletter Canary Audio Nickel Power Cable - Audiophile Hifi Stereo Power Cord, Made in the USA - 6ft For over 22 years HEAA has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! Here is a great sounding power cable from Canary Audio. It is 6 feet in length and terminated with IEC / NEMA 5-15P connectors. It has been modified, but is in good cosmetic condition and fully functional. See photos below.FREE SHIPPING in USA! Local Pickup in NYC Available All of the pre-owned items that we sell are thoroughly inspected and tested both on our test bench and in our listening room. Your satisfaction is guaranteed. Canary Audio Nickel Power Cable Cosmetic Condition:7/10: Good - Shows light wear and minor imperfections Cosmetic Notes:Shows light signs of use and handling. One end has been modified. Please see all high resolution photographs below. Functional Notes:Functions as intended.Original Box:NoManual:NoShipping Method:FedEx Ground (Domestic) / FedEx Economy, Ebay Standard Delivery (International)Shipping Weight (lbs):3 (12x8x2) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1653 (GS 9.7.5 (1653))

Canary Audio vacuum tube preamplifier Dual Mono CA-801L with separate power supply CA-801P. One of the best sets of Preamplifiers available. This Vacuum Tube Preamp and vacuum tube power supply are like new - only used for less than 12 hours total. These are a demo pair with about 12 hours on them. Retail on these top of these is $14,999. Once you hear this Preamplifier, you will stop looking for the next best thing--you will already have it! Canary Audio are already a legend throughout Asia and England. Left and right channels are completely separated. DESCRIPTION The circuitry components used in the CA-801 Signature Edition are carefully chosen and hand soldered on the military grade epoxy circuit boards. Only pure silver/Teflon coaxial cables were used for routing between the jacks and the gold plated ELMA rotary switch. The volume control being used is a 24-positions stepped attenuator hand built by our engineers. Even the DC power cables used to connect the line stages to the power supplies were built. SPECIFICATIONS Model: CA-801 Signature Edition Input Impedance: 50,000 Ohms min 100,000 Ohms max Output Impedance: 1,200 Ohms Maximum Gain: 12.3 dB Frequency Response: +/- 1 dB from 8 Hz to 78,500 Hz Hum and Noise: -86 dB Maximum Output Voltage before clipping: 30V Total Harmonic Distortion: < 0.02% Power Consumption (both channels): 66 Watts (true RMS) Tube Complement - CA-801-L: 2-12AX7/ECC83 2-12AU7/ECC82 Tube Complement - CA-801-P: 2-EF86 2-12BH7 Dimensions - CA-801-L: 19” W x 15” D x 4.75” H Dimensions - CA-801-P: 19” W x 15” D x 4.75” H Weight - CA-801-L: 23 lbs. Weight - CA-801-P: 34 lbs. These are perfect in every way. Not a single blemish (no scratches, nicks, dings or anything internal or external). All the corners and sides on every aluminum face plate, rear plate, top plate and chassis are perfect...no dings, scratch, nick, blemish or stories whatsoever. Even the base is perfect. I am very particular and feel for machining imperfections and on top and bottom - there just are none. Very beautiful Pewter blue/gray color anodized. Great for Horn Speakers. ***2 high quality AC power cord and 2 Canary DC connectors are also included*** OF WORTHY NOTE: This is the same OEM that designed and builds the current $124,999.00 Western Electric Monoblock Amplifiers (not a typo). See: https://www.westernelectric.com/97a-monoblock-amplifiers These Canary Audio amplifiers and preamplifiers use the same components, hardware, wiring, capacitors etc. Even the machine shop and metal stamping, silkscreen as well as the anodizing facilities. The thick aluminum plates and chassis panels, boards are the very same. Best of all it is all made here in the USA. Note: Canary CA-303 MonoBlock amplifiers on both sides not included (see my other listings).

Up for sale: a beautiful pair of Canary Audio M80 300B SET Monoblock amplifiers. Serial # M80120047. Both are very clean and in near-mint condition. Both have been well taken care of and seen very little use. Both sound fantastic with no physical or operational issues. Made in the USA. Recent production. Very high build quality. Both amplifiers come with the following tubes:(2) Current production Western Electric 300B tubes, test good used,(4) Sylvania 5692 tubes, test NOS,(2) Jan Philips 5U4GB tubes, test NOS. Spare tubes included:(2) NOS 5692 tubes, (2) used WE 300B tubes and (2) NOS 5U4GB tubes. Have original packing and boxes (not shown). $4500 or best offer. Available for demonstration on Saturdays in the main room at the CHRS museum, 2152 Central Ave, Alameda, CA All sale proceeds go to the California Historical Radio Society (CHRS).FREE LOCAL PICKUP IS ALWAYS AN OPTION PLEASE DO NOT PAY UNTIL WE INVOICE EBAY IS CONSISTENTLY WRONG ON SHIPPING COSTS About Us: The California Historical Radio Society (CHRS) is a not for profit corporation (IRC 501.(c).(3)) founded in 1974 to promote the restoration, education and preservation of early radio and broadcasting. We are located at 2152 Central Avenue in Alameda, California (San Francisco Bay Area) CHRS owns and operates the largest radio education and museum facility on the west coast. Please visit us online at californiahistoricalradio.com Shipping We ship Monday through Friday. Shipping and Handling charge represent the actual cost of shipping, packing material, and labor only. All purchases will be well packed for safe delivery to your location. A larger box and additional packaging when appropriate, add to the shipping weight. In an effort to reduce waste and save you money, we re-use good quality packing material when possible and your shipping cost will reflect any savings. Insurance can also be purchased by the winning bidder at their request. Please also note that shipping can cause things to shift inside even the best package and could affect the items. We work hard to maintain a 100% seller feedback so bid with confidence. Many of these items are rare, very old, vintage electronic antiques so everything we sell is offered as-is for parts or display, but not operation; except where noted. Our only warranty is fitness for particular purpose of parts or display, and merchantability as parts or display items. Combined shipping is available but depends on the size & weight of any other items. We will always try to save you money on shipping if possible. Note that all items shipped UPS are automatically insured up to $100. We use UPS primarily for shipping larger items because they have demonstrated superior handling abilities compared to USPS. However, if you live in an area such as Alaska, Hawaii, or foreign location where the UPS charges are much higher, contact us for a USPS shipping quote to save you money. If you have concerns about having adequate insurance on your purchase, please contact us prior to completing checkout. Non-USA International Customers: Many countries have a Value Added Sales Tax VAT, which is charged when an item crosses into their border. VAT is charged in addition to applicable duties. Its the buyers responsibility to know how much tax and duties will be charged. We will not declare your package as a gift. Free local pick up in Redwood City or Alameda, CA is possible with prior arrangements. Every effort has been made to properly describe all our items so you can have a pleasant and worry free experience. All of our listed items are excess to the parts or display needs of our historical radio museum and education center and/or donations from members and the public to help us maintain our operations and facility. If you have any questions or concerns please let us know. We pride myself on great packing and prompt shipping. Terms of Sale Payment is expected within 3 days of auction end unless prior arrangements are made. We reserve the right to decline PayPal payment with unverified account or unconfirmed address. Winning bidder must contact seller within 3 days of auction close to make payment arrangements. If payment has not been received after 7 days of auction close, item will be re-listed and eBay notified of non-payment unless an extension of payment has been arranged with the buyer. Return Policy: No returns accepted on this item. Thank You For Visiting! Normal 0 false false false EN-US X-NONE X-NONE

Canary Audio vacuum tube preamplifier Dual Mono CA-801L with separate power supply CA-801P. One of the best sets of Preamplifiers available. This Vacuum Tube Preamp and vacuum tube power supply are like new - only used for less than 12 hours total. These are a demo pair with about 12 hours on them. Retail on these top of these is $14,999. Once you hear this Preamplifier, you will stop looking for the next best thing--you will already have it! Canary Audio are already a legend throughout Asia and England. Left and right channels are completely separated. DESCRIPTION The circuitry components used in the CA-801 Signature Edition are carefully chosen and hand soldered on the military grade epoxy circuit boards. Only pure silver/Teflon coaxial cables were used for routing between the jacks and the gold plated ELMA rotary switch. The volume control being used is a 24-positions stepped attenuator hand built by our engineers. Even the DC power cables used to connect the line stages to the power supplies were built. SPECIFICATIONS Model: CA-801 Signature Edition Input Impedance: 50,000 Ohms min 100,000 Ohms max Output Impedance: 1,200 Ohms Maximum Gain: 12.3 dB Frequency Response: +/- 1 dB from 8 Hz to 78,500 Hz Hum and Noise: -86 dB Maximum Output Voltage before clipping: 30V Total Harmonic Distortion: < 0.02% Power Consumption (both channels): 66 Watts (true RMS) Tube Complement - CA-801-L: 2-12AX7/ECC83 2-12AU7/ECC82 Tube Complement - CA-801-P: 2-EF86 2-12BH7 Dimensions - CA-801-L: 19” W x 15” D x 4.75” H Dimensions - CA-801-P: 19” W x 15” D x 4.75” H Weight - CA-801-L: 23 lbs. Weight - CA-801-P: 34 lbs. These are perfect in every way. Not a single blemish (no scratches, nicks, dings or anything internal or external). All the corners and sides on every aluminum face plate, rear plate, top plate and chassis are perfect...no dings, scratch, nick, blemish or stories whatsoever. Even the base is perfect. I am very particular and feel for machining imperfections and on top and bottom - there just are none. Very beautiful Pewter blue/gray color anodized. Great for Horn Speakers. ***2 high quality AC power cord and 2 Canary DC connectors are also included*** OF WORTHY NOTE: This is the same OEM that designed and builds the current $124,999.00 Western Electric Monoblock Amplifiers (not a typo). See: https://www.westernelectric.com/97a-monoblock-amplifiers These Canary Audio amplifiers and preamplifiers use the same components, hardware, wiring, capacitors etc. Even the machine shop and metal stamping, silkscreen as well as the anodizing facilities. The thick aluminum plates and chassis panels, boards are the very same. Best of all it is all made here in the USA. Note: Canary CA-303 MonoBlock amplifiers on both sides not included (see my other listings).

Follow us| Sign up for our newsletter Canary Audio Nickel Power Cable - Audiophile Hifi Stereo Power Cord, Made in the USA - 6ft For over 22 years HEAA has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! Here is a great sounding power cable from Canary Audio. It is 6 feet in length and terminated with IEC / NEMA 5-15P connectors. It has been modified, but is in good cosmetic condition and fully functional. See photos below.FREE SHIPPING in USA! Local Pickup in NYC Available All of the pre-owned items that we sell are thoroughly inspected and tested both on our test bench and in our listening room. Your satisfaction is guaranteed. Canary Audio Nickel Power Cable Cosmetic Condition:7/10: Good - Shows light wear and minor imperfections Cosmetic Notes:Shows light signs of use and handling. One end has been modified. Please see all high resolution photographs below. Functional Notes:Functions as intended.Original Box:NoManual:NoShipping Method:FedEx Ground (Domestic) / FedEx Economy, Ebay Standard Delivery (International)Shipping Weight (lbs):3 (12x8x2) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1653 (GS 9.7.5 (1653))

Canary Audio vacuum tube preamplifier Dual Mono CA-801L with separate power supply CA-801P. One of the best sets of Preamplifiers available. This Vacuum Tube Preamp and vacuum tube power supply are like new - only used for less than 12 hours total. These are a demo pair with about 12 hours on them. Retail on these top of these is $14,999. Once you hear this Preamplifier, you will stop looking for the next best thing--you will already have it! Canary Audio are already a legend throughout Asia and England. Left and right channels are completely separated. DESCRIPTION The circuitry components used in the CA-801 Signature Edition are carefully chosen and hand soldered on the military grade epoxy circuit boards. Only pure silver/Teflon coaxial cables were used for routing between the jacks and the gold plated ELMA rotary switch. The volume control being used is a 24-positions stepped attenuator hand built by our engineers. Even the DC power cables used to connect the line stages to the power supplies were built. SPECIFICATIONS Model: CA-801 Signature Edition Input Impedance: 50,000 Ohms min 100,000 Ohms max Output Impedance: 1,200 Ohms Maximum Gain: 12.3 dB Frequency Response: +/- 1 dB from 8 Hz to 78,500 Hz Hum and Noise: -86 dB Maximum Output Voltage before clipping: 30V Total Harmonic Distortion: < 0.02% Power Consumption (both channels): 66 Watts (true RMS) Tube Complement - CA-801-L: 2-12AX7/ECC83 2-12AU7/ECC82 Tube Complement - CA-801-P: 2-EF86 2-12BH7 Dimensions - CA-801-L: 19” W x 15” D x 4.75” H Dimensions - CA-801-P: 19” W x 15” D x 4.75” H Weight - CA-801-L: 23 lbs. Weight - CA-801-P: 34 lbs. These are perfect in every way. Not a single blemish (no scratches, nicks, dings or anything internal or external). All the corners and sides on every aluminum face plate, rear plate, top plate and chassis are perfect...no dings, scratch, nick, blemish or stories whatsoever. Even the base is perfect. I am very particular and feel for machining imperfections and on top and bottom - there just are none. Very beautiful Pewter blue/gray color anodized. Great for Horn Speakers. ***2 high quality AC power cord and 2 Canary DC connectors are also included*** OF WORTHY NOTE: This is the same OEM that designed and builds the current $124,999.00 Western Electric Monoblock Amplifiers (not a typo). See: https://www.westernelectric.com/97a-monoblock-amplifiers These Canary Audio amplifiers and preamplifiers use the same components, hardware, wiring, capacitors etc. Even the machine shop and metal stamping, silkscreen as well as the anodizing facilities. The thick aluminum plates and chassis panels, boards are the very same. Best of all it is all made here in the USA. Note: Canary CA-303 MonoBlock amplifiers on both sides not included (see my other listings).

Canary Audio vacuum tube preamplifier Dual Mono CA-801L with separate power supply CA-801P. One of the best sets of Preamplifiers available. This Vacuum Tube Preamp and vacuum tube power supply are like new - only used for less than 12 hours total. These are a demo pair with about 12 hours on them. Retail on these top of these is $14,999. Once you hear this Preamplifier, you will stop looking for the next best thing--you will already have it! Canary Audio are already a legend throughout Asia and England. Left and right channels are completely separated. DESCRIPTION The circuitry components used in the CA-801 Signature Edition are carefully chosen and hand soldered on the military grade epoxy circuit boards. Only pure silver/Teflon coaxial cables were used for routing between the jacks and the gold plated ELMA rotary switch. The volume control being used is a 24-positions stepped attenuator hand built by our engineers. Even the DC power cables used to connect the line stages to the power supplies were built. SPECIFICATIONS Model: CA-801 Signature Edition Input Impedance: 50,000 Ohms min 100,000 Ohms max Output Impedance: 1,200 Ohms Maximum Gain: 12.3 dB Frequency Response: +/- 1 dB from 8 Hz to 78,500 Hz Hum and Noise: -86 dB Maximum Output Voltage before clipping: 30V Total Harmonic Distortion: < 0.02% Power Consumption (both channels): 66 Watts (true RMS) Tube Complement - CA-801-L: 2-12AX7/ECC83 2-12AU7/ECC82 Tube Complement - CA-801-P: 2-EF86 2-12BH7 Dimensions - CA-801-L: 19” W x 15” D x 4.75” H Dimensions - CA-801-P: 19” W x 15” D x 4.75” H Weight - CA-801-L: 23 lbs. Weight - CA-801-P: 34 lbs. These are perfect in every way. Not a single blemish (no scratches, nicks, dings or anything internal or external). All the corners and sides on every aluminum face plate, rear plate, top plate and chassis are perfect...no dings, scratch, nick, blemish or stories whatsoever. Even the base is perfect. I am very particular and feel for machining imperfections and on top and bottom - there just are none. Very beautiful Pewter blue/gray color anodized. Great for Horn Speakers. ***2 high quality AC power cord and 2 Canary DC connectors are also included*** OF WORTHY NOTE: This is the same OEM that designed and builds the current $124,999.00 Western Electric Monoblock Amplifiers (not a typo). See: https://www.westernelectric.com/97a-monoblock-amplifiers These Canary Audio amplifiers and preamplifiers use the same components, hardware, wiring, capacitors etc. Even the machine shop and metal stamping, silkscreen as well as the anodizing facilities. The thick aluminum plates and chassis panels, boards are the very same. Best of all it is all made here in the USA. Note: Canary CA-303 MonoBlock amplifiers on both sides not included (see my other listings).