This is a combination package of the Bryston BHA-1 Headphone Amplifier & Bryston BDA-1 DAC Combo Package - They are very rare and these are very powerful amplifier and a high quality DAC. Bryson is one of the oldest amplifier manufacturers still in business today and they make some of the highest quality Equipment made. The company is so confident in their equipment that they currently offer 20 year warranties on their products. They also service any of their equipment. No matter the age or the condition they will service their equipment and they have restoration services available as well to replace parts in your components. They are a truly one of the kind high quality High Fidelity company that will never leave you high and dry like some companies. This has been in my personal collection for a while and has been boxed up and not used. I want to pass it on to a good home where its going to get used. It is in mint condition and there is nothing wrong with any of the equipment whatsoever. If I didnt have four other amps I would pull this out and use this one as well. If I think about it too much chances are I might not even sell it its how nice of a system it is. If you were to buy this amplifier today it would cost over $2,500 plus tax and to buy a matching DAC would cost thousands more plus tax. This is pure vintage Hi-Fi equipment, they dont build them like they used to and theres a reason why this equipment stands the test of time. You are going to be very happy with this system. Advancing our tradition of unmatched audio performance and functionality, the BHA1 is Bryston’s reference amplifier solution for the finest listening experience from your headphones. The BHA 1 is compatible with both traditional (single-ended) and balanced headphones. T he advantage of powering each headphone driver (right and left) with two amplifiers configured in balanced or series mode is a doubling of the signal voltage to each speaker. T his design configuration has been the foundation of Bryston’s legendary 7B, 14B and 28B amplifiers and now headphone users can experience the same dramatic resolution from the BHA-1. The Bryston BHA-1 employs the vast benefits of balanced amplifier designs that are inherently clean and stable especially when there is a demand for higher power and/or a difficult load to drive. Because most headphones are not balanced devices, Bryston provides a traditional (unbalanced) ¼-inch input on the BHA-1 as well as inputs for balanced headphones. Bryston will also provide modifications to some headphone models to make them compatible with a balanced output configuration, along with an adapter cable assuring backwards compatibility to all traditional (unbalanced) headphone outputs. • Balanced Dual mono circuitry • High Quality Noble Stereo Volume control – laser trimmed • Left/Right Balance Control • 6 Fully discrete Class A Bryston operational amplifiers • Balanced outputs – 4 pin stereo and dual left/right 3 pin outputs • Stereo ¼ inch single ended outputs • 14dB or 20dB of selectable gain available • All input and output connectors are Gold plated • 10k input impedance • Multiple headphone drive capability poWer opTionS: • Standard: high quality Bryston internal analog power supply • Optional: MPS-2 power supply also available (replaces internal supply). Bryston BHA-1 Headphone Amp Specifications Harmonic distortion: Less than .003 at 32 ohms at 100mW 20Hz to 20KHz. im distortion: Less than 001% SignAl To noise: Greater than 105dB frequency response: 20 to 20KHz plus or minus .1dB Weight 8lbs (3.6 kg) Dimensions: (H) - 3.125 inches x (W) 17 or 19 inches x (D) 11.25 inches Hi-Z load: 20 Volts into 600 ohms (667mW) at 001% THD + N at 20-20K loW-Z loAd: 4 volts into 32 ohms (500 mW) at 001% THD + N at 20-20K Features3 stereo inputs: RCA, XLR, and 3.5mm TRSFully Class A discrete operational amplifiers.Low distortion, high power outputBalanced outputSwitchable gainFully convection cooled means no noisy fansMachined and anodized aluminum enclosure and dress panelLegendary Bryston 20 Year WarrantyOptionsSilver or black faceplate17” or 19” faceplate (non-rack mountable)17 compatible with rack mount earsLocking mechanisms on Balanced XLR connectorsDimensions Inches: 17 or 19 W x 2.71 H x 11.10 DWeight11.7 lbs | 5.3 kgFrequency Response:20Hz - 20kHzTHD+N (20Hz-20kHz @ Rated Power):<0.005%Power Output (per channel):2W @ 32?Input Impedance:Unbalanced 10K?Balanced +15k?/-5k?Sensitivity:HI (approx 20 dB) setting: 70mV in = 100 mW out into 50 ? (500mV in = 5V out)LO (approx 14 dB) setting: 140mV in = 100 mW out into 50 ? (500mV in = 2.5V out) Bryston BDA-1 DAC Digital to Analog converters (DACs) have been enjoying something of a renaissance in the past couple of years due to the widespread adoption of computer based music. Back before SACD, DVD-A and multichannel audio, DACs were the source component du jour for redbook CD. With the adoption of the new high-resolution formats, DACs fell out of favor, replaced by integrated universal disc players. Today, many people have gone to entirely computer based audio setups. The highest resolution digital audio available today does not come on a disc, but is available via download. This means DACs are back, and the Bryston BDA-1 is regarded as one of the best of the new breed of 24 bit 192 kHz DACs. Along with the Bryston BDA-1, we review the Halide Design USB to SPDIF Bridge. BDA-1Design: DACDecoding: 24 Bit, 192 kHzMFR: 20 Hz – 20 KHz, -0.1dBS/N: 140 dB UnweightedTHD plus N: .002%Output Level – 2.3V Unbalanced – 4.6V BalancedDimensions: 1.75? H x 17? W x 11.25? DWeight: 12 PoundsMSRP: $2,150 USAHalide Design USB to SPDIF BridgeDesign: Bridge Between USB and SPDIFPower: Supplied by USB ConnectionBuilt-In Power Rails for Digital Circuitry and Master ClockSupported Rates: 44.1, 48, 88.2, and 96 kHz (user selectable), at 24 bit resolution. (Note: Windows Vista / 7 currently requires WASAPI for non-resampled 88.2 kHz playback by plug-n-play USB audio products)Connection: 75 ohm, BNC or RCALength – 6 Feet, 16 Feet Options

This is a combination package of the Bryston BHA-1 Headphone Amplifier & Bryston BDA-1 DAC Combo Package - They are very rare and these are very powerful amplifier and a high quality DAC. Bryson is one of the oldest amplifier manufacturers still in business today and they make some of the highest quality Equipment made. The company is so confident in their equipment that they currently offer 20 year warranties on their products. They also service any of their equipment. No matter the age or the condition they will service their equipment and they have restoration services available as well to replace parts in your components. They are a truly one of the kind high quality High Fidelity company that will never leave you high and dry like some companies. This has been in my personal collection for a while and has been boxed up and not used. I want to pass it on to a good home where its going to get used. It is in mint condition and there is nothing wrong with any of the equipment whatsoever. If I didnt have four other amps I would pull this out and use this one as well. If I think about it too much chances are I might not even sell it its how nice of a system it is. If you were to buy this amplifier today it would cost over $2,500 plus tax and to buy a matching DAC would cost thousands more plus tax. This is pure vintage Hi-Fi equipment, they dont build them like they used to and theres a reason why this equipment stands the test of time. You are going to be very happy with this system. Advancing our tradition of unmatched audio performance and functionality, the BHA1 is Bryston’s reference amplifier solution for the finest listening experience from your headphones. The BHA 1 is compatible with both traditional (single-ended) and balanced headphones. T he advantage of powering each headphone driver (right and left) with two amplifiers configured in balanced or series mode is a doubling of the signal voltage to each speaker. T his design configuration has been the foundation of Bryston’s legendary 7B, 14B and 28B amplifiers and now headphone users can experience the same dramatic resolution from the BHA-1. The Bryston BHA-1 employs the vast benefits of balanced amplifier designs that are inherently clean and stable especially when there is a demand for higher power and/or a difficult load to drive. Because most headphones are not balanced devices, Bryston provides a traditional (unbalanced) ¼-inch input on the BHA-1 as well as inputs for balanced headphones. Bryston will also provide modifications to some headphone models to make them compatible with a balanced output configuration, along with an adapter cable assuring backwards compatibility to all traditional (unbalanced) headphone outputs. • Balanced Dual mono circuitry • High Quality Noble Stereo Volume control – laser trimmed • Left/Right Balance Control • 6 Fully discrete Class A Bryston operational amplifiers • Balanced outputs – 4 pin stereo and dual left/right 3 pin outputs • Stereo ¼ inch single ended outputs • 14dB or 20dB of selectable gain available • All input and output connectors are Gold plated • 10k input impedance • Multiple headphone drive capability poWer opTionS: • Standard: high quality Bryston internal analog power supply • Optional: MPS-2 power supply also available (replaces internal supply). Bryston BHA-1 Headphone Amp Specifications Harmonic distortion: Less than .003 at 32 ohms at 100mW 20Hz to 20KHz. im distortion: Less than 001% SignAl To noise: Greater than 105dB frequency response: 20 to 20KHz plus or minus .1dB Weight 8lbs (3.6 kg) Dimensions: (H) - 3.125 inches x (W) 17 or 19 inches x (D) 11.25 inches Hi-Z load: 20 Volts into 600 ohms (667mW) at 001% THD + N at 20-20K loW-Z loAd: 4 volts into 32 ohms (500 mW) at 001% THD + N at 20-20K Features3 stereo inputs: RCA, XLR, and 3.5mm TRSFully Class A discrete operational amplifiers.Low distortion, high power outputBalanced outputSwitchable gainFully convection cooled means no noisy fansMachined and anodized aluminum enclosure and dress panelLegendary Bryston 20 Year WarrantyOptionsSilver or black faceplate17” or 19” faceplate (non-rack mountable)17 compatible with rack mount earsLocking mechanisms on Balanced XLR connectorsDimensions Inches: 17 or 19 W x 2.71 H x 11.10 DWeight11.7 lbs | 5.3 kgFrequency Response:20Hz - 20kHzTHD+N (20Hz-20kHz @ Rated Power):<0.005%Power Output (per channel):2W @ 32?Input Impedance:Unbalanced 10K?Balanced +15k?/-5k?Sensitivity:HI (approx 20 dB) setting: 70mV in = 100 mW out into 50 ? (500mV in = 5V out)LO (approx 14 dB) setting: 140mV in = 100 mW out into 50 ? (500mV in = 2.5V out) Bryston BDA-1 DAC Digital to Analog converters (DACs) have been enjoying something of a renaissance in the past couple of years due to the widespread adoption of computer based music. Back before SACD, DVD-A and multichannel audio, DACs were the source component du jour for redbook CD. With the adoption of the new high-resolution formats, DACs fell out of favor, replaced by integrated universal disc players. Today, many people have gone to entirely computer based audio setups. The highest resolution digital audio available today does not come on a disc, but is available via download. This means DACs are back, and the Bryston BDA-1 is regarded as one of the best of the new breed of 24 bit 192 kHz DACs. Along with the Bryston BDA-1, we review the Halide Design USB to SPDIF Bridge. BDA-1Design: DACDecoding: 24 Bit, 192 kHzMFR: 20 Hz – 20 KHz, -0.1dBS/N: 140 dB UnweightedTHD plus N: .002%Output Level – 2.3V Unbalanced – 4.6V BalancedDimensions: 1.75? H x 17? W x 11.25? DWeight: 12 PoundsMSRP: $2,150 USAHalide Design USB to SPDIF BridgeDesign: Bridge Between USB and SPDIFPower: Supplied by USB ConnectionBuilt-In Power Rails for Digital Circuitry and Master ClockSupported Rates: 44.1, 48, 88.2, and 96 kHz (user selectable), at 24 bit resolution. (Note: Windows Vista / 7 currently requires WASAPI for non-resampled 88.2 kHz playback by plug-n-play USB audio products)Connection: 75 ohm, BNC or RCALength – 6 Feet, 16 Feet Options

BRYSTON BDA-1 DAC. Original Box, Power Cord Included No remote was included because it was optional. No manual

I check the item before I put on sale it .it is excellent condition and working well please look the picture what you see what you get thank you

Bryston BDA-1 DAC Digital to Analog Converter All pictures are of the actual item for sale. Includes power cord. Fully functional and excellent cosmetic condition. Ships on the same or next business day, packaged securely and insured. Guarantee Each items stated functionality is guaranteed or your money back including both shipping charges.All used merchandise has been tested. Any issues found are noted clearly in the description above. Shipping All items will be shipped within one business day of cleared payment. International shipping costs do not include customs fees. Returns Returns will be accepted no questions asked within two weeks of the buyers receipt of the item.

Bryston BDA-1 DAC D/A Converter - 17” Black, Original Box Good Condition. Two small nicks in the top front face. Other than that very good condition. Shipping US only .Unit is set to 120v.

Black-Audioline.de Bryston BDA-1 DAC in wenig gebrauchtem und technisch einwandfreiem Zustand. Das Gerät weist somit nur geringste Gebrauchsspuren auf, alle Tasten funktionieren einwandfrei. Lieferung inklusive Bedienungsanleitung als .pdf Datei, Netzkabel und 1 Jahr Gewährleistung. ALLE Fotos zeigen das hier angebotene Gerät. Bryston BDA-1 DAC headphone preamp in less used condition, works perfectly. It shows only a few signs of use. Delivery includes commercial invoice, manual as .pdf file, power cable and 1 year warranty. ALL pics show the item on offer. Bryston BDA-1 The Bryston BDA-1 is an external Stereo DAC (Digital to Analog Converter) using fully discrete Class-A proprietary Bryston analog circuits, two independent linear power supplies, and dual Crystal CS-4398 DAC chips. The BDA-1 features an impressive array of inputs for USB, COAX, OPTICAL, AES-EBU, and BNC equipped digital devices. For audio outputs, the BDA-1 offers both balanced XLR as well as unbalanced RCA stereo connectors on the rear panel. The BDA-1 is RS-232 software upgradeable via PC, Mac upgrades are not supported at this time. I have been informed by Bryston that there have not been any firmware upgrades for this model so that should not be an issue for Mac owners Bryston delivers superb sonic performance by re-sampling and re-clocking the digital input in order to reduce jitter. The result is a significant reduction in jitter (1/1000 of a nanosecond). But it isnt enough to just get the bits right; those bits have to be converted back into music with the same timing reference as when the music was first digitized. The input signal of the BDA-1 is re-clocked and re-sampled to reduce any possibility of jitter affecting the sound quality. Even the input receiver and the sample rate converter serve to further reduce jitter. The most critical part of the circuit design in the Bryston BDA-1 is the DACs analog outputs, connected directly to a pair of proprietary Bryston Class A discrete operational amplifiers. Bryston hand assembles using only the finest components and individually tests every product they manufacture. There are 6 digital inputs, which are easily selected using a front panel switch. Bryston BDA-1 DAC Bedienungsanleitung als .pdf Datei / User Manual as .pdf file Netzkabel / Power Core Auf diesen Artikel gilt eine Gewährleistung von 1 Jahr mit Rechnung und Seriennummer. Sie kaufen ohne Risiko! Auf diesen Artikel gilt eine Widerrusfrist von 14 Tagen. Alle Bilder sind wahrheitsgemäß und entprechen dem angebotenen Artikel. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Haben Sie Fragen zu diesem Angebot? Sie können uns gerne kontaktieren, siehe Rechtliche Informationen des Verkäufers unten: Das Gerät kann gerne nach kurzer Terminabsprache auch vor Ort abgeholt werden. Vorkasse / Bank transfer (IBAN + BIC) PayPal Barzahlung bei Abholung Inland: Deutsche Post DHL 8,49 € Europäische Union Deutsche Post DHL 18,00 € Europa ohne EU Deutsche Post DHL 28,00 € Welt Deutsche Post DHL 92,00 € Rest-Welt Deutsche Post DHL Der Versand erfolgt am Tag des Zahlungseingangs. Nach dem Paketversand erhalten Sie von uns die Tracking-ID per E-Mail zur Nachverfolgung des Paketes. Ein sicherer Versand hat bei uns allerhöchste Priorität. Sollte keine Originalverpackung für den Artikel vorhanden sein, wird eine gleichwertige, sichere Verpackung verwendet. Lieferungen per Express oder per Nachnahme innerhalb der EU möglich. Delivery will take place on the day we receive the payment. We will send you the tracking-id of the package to allow you to track the package shipping. A safe delivery of the item is our highest priority. In the case no original packaging is available, we will use an equal packaging to gurantee a safety arrival. Cash on delivery within EU possible.

Bryston BDA-1 DAC D/A Converter - 17” Black, Original Box Good Condition. Two small nicks in the top front face. Other than that very good condition. Shipping US only .Unit is set to 120v.

Excellent working condition. Cosmetically near excellent with very light wear - see photos. Comes with manual and power supply. Details: Eight digital inputs: USB 1.1, four S/PDIF electrical (RCA, BNC); two S/PDIF optical (TosLink), AES/EBU (XLR). Digital input sample rates accepted: 32, 44.1, 48, 88.2, 96, 176.4, and 192kHz (transformer-coupled S/PDIF, AES/EBU); 32–48kHz, USB. Input word lengths accepted: 16–24-bit, S/PDIF and AES/EBU; 16-bit, USB. Digital output: S/PDIF bypass loop output via RCA jacks. Control inputs: RS-232 port via 9-pin subminiature connector; remote 12V power-on/off trigger. Analog outputs: 1 pair each RCA, balanced XLR. Maximum output level: 2.3V RMS unbalanced, 4.6V balanced. Output impedance: 100 ohms balanced, 50 ohms unbalanced. Frequency response: 20Hz–20kHz, ±0.1dB. THD+noise at 1kHz: 0.002%. IMD (CCIF): 0.0003%, 19+20kHz. Channel separation: 109dB at 1kHz. ************* Shipping or local pickup in San Diego, California OK - must pick up within ten days of purchase. Thanks for looking!Thanks for looking!

Bryston BDA-1 DAC D/A Converter - 17” Black, Original Box Good Condition. Two small nicks in the top front face. Other than that very good condition. Shipping US only .Unit is set to 120v.

Excellent working condition. Cosmetically near excellent with very light wear - see photos. Comes with manual and power supply. Details: Eight digital inputs: USB 1.1, four S/PDIF electrical (RCA, BNC); two S/PDIF optical (TosLink), AES/EBU (XLR). Digital input sample rates accepted: 32, 44.1, 48, 88.2, 96, 176.4, and 192kHz (transformer-coupled S/PDIF, AES/EBU); 32–48kHz, USB. Input word lengths accepted: 16–24-bit, S/PDIF and AES/EBU; 16-bit, USB. Digital output: S/PDIF bypass loop output via RCA jacks. Control inputs: RS-232 port via 9-pin subminiature connector; remote 12V power-on/off trigger. Analog outputs: 1 pair each RCA, balanced XLR. Maximum output level: 2.3V RMS unbalanced, 4.6V balanced. Output impedance: 100 ohms balanced, 50 ohms unbalanced. Frequency response: 20Hz–20kHz, ±0.1dB. THD+noise at 1kHz: 0.002%. IMD (CCIF): 0.0003%, 19+20kHz. Channel separation: 109dB at 1kHz. ************* Shipping or local pickup in San Diego, California OK - must pick up within ten days of purchase. Thanks for looking!Thanks for looking!

Bryston BDA-1 DAC D/A Converter - 17” Black, Original Box Good Condition. Two small nicks in the top front face. Other than that very good condition. Shipping US only .Unit is set to 120v.

Bryston BDA-1 DAC D/A Converter - 17” Black, Original Box Good Condition. Two small nicks in the top front face. Other than that very good condition. Shipping US only .Unit is set to 120v.

Bryston BDA-1 DAC D/A Converter - 17” Black, Original Box Good Condition. Two small nicks in the top front face. Other than that very good condition. Shipping US only .Unit is set to 120v.

Bryston BDA-1 DAC D/A Converter - 17” Black, Original Box Good Condition. Two small nicks in the top front face. Other than that very good condition. Shipping US only .Unit is set to 120v.

Bryston BDA-1 DAC (Zwart) Perfect condition, smoke free. I use this unit up until today with my Parasound amp. Sounds really amazing! Detailled and musical. I sell it because I have bought a new integrated amp.