Tested and works great! Looks a little rough around the edges but it doesn’t effect quality. Scratched up and the cord may need replacing eventually but right now it functions perfectly

Edwards Home Entertainment and Design, an appointed and displaying dealer for Bowers & Wilkins, Focal, NAIM, Parasound, Classe Audio, Rotel and Michi, Fyne Audio, Rel Acoustics, JL Audio, Perlisten, Marantz, Lumin, and Nordost, is offering this fantastic Bryston BHA-1 headphone amplifier. The BHA-1 will come complete with factory packaging and box.  Never sold to the public. Buy / Sell / Trade / Consign - Edwards Home Entertainment and Design (EHEAD) has been a premier seller of carefully selected, pre-loved high end audio equipment since 1997. Now an authorized dealer for Parasound (displaying JC-1+, HINT 6, JC-5, JC-3+), Bowers & Wilkins (displaying 801D4, 802D4, 803D4, 804D4, 805D4, 702S2 Signature Midnight Blue, 705S2 Signature), Classe Delta (displaying the Delta Pre, Delta Stereo, Delta Monos), Focal (displaying Scala EVO, Sopra3, Sopra 2), NAIM (displaying the SuperNAIT3), Rotel Michi (displaying the P5, S5), Fyne Audio (displaying F1-12, 502SP, F700), Marantz (displaying PM-10 Integrated, SA-10 Super Audio SACD/CD Player, TT-15S2 TurnTable), Rel Acoustics (displaying the Carbon Special, S/812 and S/512), Lumin (displaying the newest P1, T2, D2, and U2 Mini),  Perlisten (displaying the 7St, and D212), JL Audio (displaying the G213v2, F113v2, D110 subs), Nordost (displaying Norse and Leif series, with demo cases for in home trials), SolidSteel (displaying HyperSpike and S3 walnut), Finite Element (displaying Pagode).  EHEADAudio site can be located in South San Francisco on the web, with direct phone / voice / text support.  We are always looking to buy quality used gear. Despite listings that may indicate LOCAL PICK UP ONLY - this is just to facilitate posting of gear. Logistics is our specialty, we can facilitate packaging and shipping to and from anywhere in the country. If you are interested in our gear, please reach out and we can figure out a shipping solution that will work. Our shop is in South San Francisco - stop by and put your eyes and ears to work! CA residents must pay CA sales tax.

Edwards Home Entertainment and Design, an appointed and displaying dealer for Bowers & Wilkins, Focal, NAIM, Parasound, Classe Audio, Rotel and Michi, Fyne Audio, Rel Acoustics, JL Audio, Perlisten, Marantz, Lumin, and Nordost, is offering this fantastic Bryston BDA-2 DAC. The DAC will come complete with factory packaging and box.  Never sold to the public. Buy / Sell / Trade / Consign - Edwards Home Entertainment and Design (EHEAD) has been a premier seller of carefully selected, pre-loved high end audio equipment since 1997. Now an authorized dealer for Parasound (displaying JC-1+, HINT 6, JC-5, JC-3+), Bowers & Wilkins (displaying 801D4, 802D4, 803D4, 804D4, 805D4, 702S2 Signature Midnight Blue, 705S2 Signature), Classe Delta (displaying the Delta Pre, Delta Stereo, Delta Monos), Focal (displaying Scala EVO, Sopra3, Sopra 2), NAIM (displaying the SuperNAIT3), Rotel Michi (displaying the P5, S5), Fyne Audio (displaying F1-12, 502SP, F700), Marantz (displaying PM-10 Integrated, SA-10 Super Audio SACD/CD Player, TT-15S2 TurnTable), Rel Acoustics (displaying the Carbon Special, S/812 and S/512), Lumin (displaying the newest P1, T2, D2, and U2 Mini),  Perlisten (displaying the 7St, and D212), JL Audio (displaying the G213v2, F113v2, D110 subs), Nordost (displaying Norse and Leif series, with demo cases for in home trials), SolidSteel (displaying HyperSpike and S3 walnut), Finite Element (displaying Pagode).  EHEADAudio site can be located in South San Francisco on the web, with direct phone / voice / text support.  We are always looking to buy quality used gear. Despite listings that may indicate LOCAL PICK UP ONLY - this is just to facilitate posting of gear. Logistics is our specialty, we can facilitate packaging and shipping to and from anywhere in the country. If you are interested in our gear, please reach out and we can figure out a shipping solution that will work. Our shop is in South San Francisco - stop by and put your eyes and ears to work! CA residents must pay CA sales tax.

Bryston 0.5B in excellent condition. All inputs (including Phono) tested, and all functions work as-new. Cosmetics are M-, with one scratch on the bottom plate (see photo), and a few very small, hard to see marks on the top plate (zoom in on the top plate photo). Will be carefully and properly packed.

Introducing the Bryston 4B power amplifier, delivering a powerful 250 watts of high-quality audio output with 2 channels. This unit is ideal for those seeking exceptional audio performance, with a brand that has established itself as a leader in the industry. The amplifier features stereo L/R RCA inputs, XLR inputs, as well as Banana Speaker Jack outputs, allowing for easy integration with a range of audio systems. The unit is in great working condition and has been well-maintained to ensure optimal performance. Excellent working condition. Fantastic amp.

Solid-state stereo power amplifier. Output power: 250W continuous into 8 ohms (24dBW), 400Wpc rms continuous into 4 ohms (23dBW); 800W continuous into 8 ohms in bridged mode (29dBW). Current delivery: 16A continuous, 48A peak, per channel. Frequency response: 1Hz100kHz, 3dB for 1W output. S/N Ratio: hum and noise, 108dB below rated output, 90dB IHF. Input sensitivity: 1.4V for 250Wpc into 8 ohms. Voltage gain: 30dB. THD+noise: 20Hz20kHz, 0.01%. IM distortion (60Hz+7kHz, 4:1, SMPTE method): less than 0.01% at rated power. Damping factor: greater than 500 at 20Hz, at 8 ohms (equivalent to an output impedance of less than 0.016 ohms). Input impedance: 50k ohms unbalanced, 30k ohms balanced. Polarity: non-inverting. Dimensions:16 3/16 (411mm) W by 7 1/8 (181mm) H by 13 (343mm) D. Weight: 40.1 lbs (20.2kg) net.

Solid-state stereo power amplifier. Output power: 250W continuous into 8 ohms (24dBW), 400Wpc rms continuous into 4 ohms (23dBW); 800W continuous into 8 ohms in bridged mode (29dBW). Current delivery: 16A continuous, 48A peak, per channel. Frequency response: 1Hz100kHz, 3dB for 1W output. S/N Ratio: hum and noise, 108dB below rated output, 90dB IHF. Input sensitivity: 1.4V for 250Wpc into 8 ohms. Voltage gain: 30dB. THD+noise: 20Hz20kHz, 0.01%. IM distortion (60Hz+7kHz, 4:1, SMPTE method): less than 0.01% at rated power. Damping factor: greater than 500 at 20Hz, at 8 ohms (equivalent to an output impedance of less than 0.016 ohms). Input impedance: 50k ohms unbalanced, 30k ohms balanced. Polarity: non-inverting. Dimensions:16 3/16 (411mm) W by 7 1/8 (181mm) H by 13 (343mm) D. Weight: 40.1 lbs (20.2kg) net.

Bryston 9B ST Home Theater Amplifier 5 channel - with original box Unit works great. Ships FEDEX, CONUS only. Worldwide shipping via ebay international shipping program.

Bryston 9B SST Home Theater Amplifier - 140W x 5 Into 8 Ohms Bryston 9B SST Home Theater Amplifier - 140W x 5 Into 8 Ohms General:The 9B SST is a five-channel power amplifier that can produce 140 watts per channel into eight ohms, and 200 watts per channel into four-ohm speaker loads. If you look closely at the specs of most theater amps, many are incapable of producing the full rated output to all channels at the same time which is a huge compromise for a high-end theater setup.No compromises in design, quality, or total output here.Super nice condition with just a few scuffs or light dings.Fully tested here at SkyFi and working as it should on all 5 channels. One channel was just serviced by Bryston.Brand Background:Bryston Ltd. is a Canadian company which has been designing and manufacturing audio equipment for over 35 Years. While there are many companies competing in their market, Bryston’s gear is coveted by enthusiasts and professionals alike. They have earned the reputation of providing bullet-proof reliability, high performance and value. Ownership:Single OwnerConnections:RCA, XLR and 5 Way Binding PostsGeneral Sound:Neutral sound with little to no colorationCosmetic Condition:7/10 = Good. One or two minor scratches. Well Maintained.Working Condition:Working perfectly and tested in our lab and listening room.Included:Just the unit and power cord.Packing:Will be packed using our highly developed in-house process and custom packing materials. Specs: Solid State / Tubed Solid State Number of Channels 5 Power 120 Watts / Channel @ 8 Ω(1), 200 Watts / Channel @ 4 Ω(1) Power Bandwidth < 1 Hz to over 100 kHz(1) Slew Rate > 60 Volts per microsecond(1) Total Harmonic Distortion < 0.005 %, 20 Hz - 20 kHz @ 120 Watts into 8 Ω(1) < 0.007 %, 20 Hz - 20 kHz @ 200 Watts into 4 Ω(1) Intermodulation Distortion < 0.005 %, 20 Hz - 20 kHz @ 120 Watts into 8 Ω(1) < 0.007 %, 20 Hz - 20 kHz @ 200 Watts into 4 Ω(1) Noise > 110 dB below full output 29 dB gain(1) > 113 dB below full output 23 dB gain(1) > 116 dB below full output 17 dB gain(1) Sensitivity 1.1 Volts = 120 Watts @ 8 Ω (1 Volt position)(1) 2.2 Volts = 120 Watts @ 8 Ω (2 Volts position)(1) 4.4 Volts = 120 Watts @ 8 Ω (4 Volts position)(1) Input Impedance 50k Ω unbalanced(1) 20k Ω balanced(1) Damping Factor > 500 @ 20 Hz, ref. 8 Ω Power Consumption and Heat Load At idle: 192 Watts(1) Single channel: 120 Watts @ 8 Ω: 242 Watts(1) 5 channels: 120 Watts @ 8 Ω: 1397 Watts(1) Single channel: 200 Watts @ 4 Ω: 422 Watts(1) 5 channels: 200 Watts @ 4 Ω: 2295 Watts(1) Dimensions (W x D x H) 19 x 19 x 5.25(1) 48.3 x 48.3 x 13.3 cm(1) Weight 62 lbs.(1) 28 kg.(1) Weight: 69 lbs. Testing Process: We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect the PCBs for discoloration from resistors or transistors that may have been running hot. On vintage units we often spot check select capacitors for value and ESR. If the amplifier passes visual inspection, we move on to a controlled power on sequence using a Sencore safety analyzer to monitor current draw in real time. Once the amplifier is determined to be safe to operate, we connect it to full AC mains for function and power testing. We connect the speaker outputs of the amplifier to a Sencore PA81 Power Analyzer which acts as a dummy load, DC offset monitor, and oscilloscope interface. We start with a low level 1KHz test signal at the amplifier’s input and slowly increase its amplitude while monitoring the output on an oscilloscope for signs of noise, clipping, distortion, or improper channel balance. We continue increasing the signal level until the amplifier reaches clipping. At this point we take an output power measurement and compare it to the spec sheet of the amplifier to verify proper performance. If the device under test has both balanced and single ended inputs they are both tested at this time. We finish off the bench evaluation with a 1KHz square wave check and a 20Hz to 20KHz sine sweep to assess the amplifier’s frequency response characteristics. This battery of tests will usually reveal if the amplifier has any issues that need further attention. Before the device leaves the bench, we perform a listening test with actual music using a variety of preferred test tracks. Our benches are outfitted with familiar monitor speakers which help us identify inconsistencies that will not always show up on our test gear. The main things that we are listening for are hum or noise with no signal present, proper center image, clicks, pops, or any other obvious undesirable audio characteristics. If the unit passes all of these tests it is moved to our long term testing rig where we simulate real word operating conditions for 6-8 hours. This allows us to monitor the unit for signs of thermal runaway or intermittent issues that only crop up when the unit has fully come up to temperature. *Scroll down to view additional images for this listing and click to enlarge. **Please note we are not a repair shop and only restore what we own. ---------- SkyFi Audio - Curators of Vintage Audio Gear SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of high end audio equipment. We only buy equipment that we admire and are passionate about. No mid-fi, no gimmicks, no junk. Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold. We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units. Please note we are not a repair shop and only restore what we own. Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Project, and Sony ES, we have access to OEM parts, service, and support. ---------- PURCHASING GUIDELINES: 1) This item will be professionally packaged and insured for safe transit to your home unless you opt for local pickup from our shop. All local pickup items are only wrapped in industrial strength clear stretch wrap if the original manufacturer packaging is unavailable. Local pickup is available in Glen Rock, NJ, 07452, just a half hour drive from Midtown Manhattan, with convenient parking near our building. If we don’t have the original packaging, we use heavy-duty double-ply corrugated boxes with custom made to your item SealedAir Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. Lightweight items will be bubble wrapped and shipped in a high-quality box. 2) We will not review or accept any offers that do not go through the official eBay system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please do not message, email, or text any offers. 3) All listings are eligible for the eBay Global Shipping Program unless the item exceeds the maximum weight/price requirements to your country. If this is the case simply message us via eBay. We only accept bank wire transfers for international payments and frequently ship worldwide via UPS. 4) Please ensure your shipping address is correct within eBay as we will ONLY ship to the eBay/PayPal Confirmed Shipping Address. No exceptions. 5) eBay may charge and collect sales tax to your state/jurisdiction which we have no control over. eBay v1.7 × × × × × × × × × × × × × Buy now and save! Tell a friend Visit store Watch now Postage info UPS Ground - $0.00 Local Pickup - $0.00 Click the Postage tab above the listing description for more info Additional delivery notes PICK UP OPTION Our items are available for pick-up. Pick up procedure is as follows: Purchase the item through eBay Email us to coordinate pickup PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Dynavector 10x3 High-Output MC Phono Cartridge Music Reference RM-5 MK II Tube Preamplifier with Phono Music Reference RM-9 Tube Amplifier With EL34s Marantz Model 150 Vintage AM/FM Tuner with Scope Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © SkyFi Audio Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are not accepted Seller will pay for return shipping. eBay integration by

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift Audio 6/2002 , darin ein Testbericht der Vorstufe/Endstufe Bryston 25 BPS und 14 BSST. Foreign customers welcome! Worldwide shipping in very safe packaging! Drucknummer/print number: ohne, without Sprache/language: Deutsch, German Zustand/condition: hervorragend, excellent Seitenanzahl/pages: 4 Format/size: 28 x 21 cm

Excellent preamplifier, Its condition is original. All its components are in perfect working order. Welding, potentiometer, selectors were revised, without problems or noise, complete original buttons and in very good aesthetic condition. In photo 2 you can see a scratch. If you have any questions or need more images, I keep detailed photos. Feel free to ask. It will be professionally packaged, and shipped via UPS or your carrier of choice. *No returns* *No shipping outside US* Specifications : Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Input sensitivity: 50mV (line) Signal to noise ratio: 80dB (MM), 95dB (line) Output: 15V (Pre out Max) Weight: 3.2Kg

This Bryston 2b stereo amplifier is a great addition to any home audio system. The amplifier runs on 120v 50/60hz and has a total power output of 720va. Its brand, Bryston, is well-known for its high-quality audio equipment. With this amplifier, you'll be able to enjoy your favorite songs and audio with crystal clear quality. It is perfect for anyone who is looking to upgrade their home audio system. This amplifier is in good working order and ready to be used.

Excellent preamplifier, Its condition is original. All its components are in perfect working order. Welding, potentiometer, selectors were revised, without problems or noise, complete original buttons and in very good aesthetic condition. In photo 2 you can see a scratch. If you have any questions or need more images, I keep detailed photos. Feel free to ask. It will be professionally packaged, and shipped via UPS or your carrier of choice. *No returns* Specifications : Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Input sensitivity: 50mV (line) Signal to noise ratio: 80dB (MM), 95dB (line) Output: 15V (Pre out Max) Weight: 3.2Kg

Sonics 600X (Bryston 5B-ST) Hi-Fi Amplifier GOOD CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 5B-ST) [ Listing is for 1 amp - however we have 10 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. While the 600X is THX certified, it is generally accepted that IMAX audio quality exceeds THX, Dolby and DTS standards in all areas. The Sonics 600X is effectively a rebadged Bryston 5B (see links below) and is a three channel power amplifier rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: Internal: 10A + 6A External: 8A + 5A Specifications: Power: 120 watts rms/ch @ 8 Ohms 200 watts rms/ch @ 4 Ohms Frequency response: 20 Hz - 20 kHz ± 0.01 dB Input impedance: 50 kOhms Damping factor: 500 Sensitivity: 0.75V rms for full output into 8 Ohms THD: 0.02% S/N: 112 dB Dimensions: 5-1/2 H x 19 W x 17 D Weight: 37 pounds While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Many audiophiles choose to send their amps to Bryston for full refurbishment - if you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. However, if for any reason the buyer chooses to return unit to PPI, the buyer is responsible for all return shipping costs. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 5B-ST) Hi-Fi 3 Channel Amplifier EXCELLENT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 5B-ST) [ Listing is for 1 amp - however we have 10 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. While the 600X is THX certified, it is generally accepted that IMAX audio quality exceeds THX, Dolby and DTS standards in all areas. The Sonics 600X is effectively a rebadged Bryston 5B (see links below) and is a three channel power amplifier rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: Internal: 10A + 6A External: 8A + 5A Specifications: Power: 120 watts rms/ch @ 8 Ohms 200 watts rms/ch @ 4 Ohms Frequency response: 20 Hz - 20 kHz ± 0.01 dB Input impedance: 50 kOhms Damping factor: 500 Sensitivity: 0.75V rms for full output into 8 Ohms THD: 0.02% S/N: 112 dB Dimensions: 5-1/2 H x 19 W x 17 D Weight: 37 pounds While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Many audiophiles choose to send their amps to Bryston for full refurbishment - if you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. However, if for any reason the buyer chooses to return unit to PPI, the buyer is responsible for all return shipping costs. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

BRYSTON 0.5B Preamplifier You are bidding on BRYSTON 0.5B Preamplifier. Its in great working condition. Looks great, but please remember this is used item and does have signs of being used. All switches and knobs working great. All connections working great. Please do research before you buy, so you will know what you need to use this item. Missing box and manual. Please look at the pictures before bidding, you will get what you see in the pictures. POLICY: SELLING AS IS, NO RETURNWe ask all buyers to email us before opening a EBAY CLAIM CASEI WILL NOT ACCEPT THE ITEM BACK, IF YOU CHANGE YOUR MIND OR DO NOT LIKE THE ITEM OR DID NOT READ THE DESCRIPTION AND LOOKED AT THE PICTURES.We ask all the buyers before leaving a negative or neutral, please email us with a problem first and we will do our best to make you happy again.We care about our buyers and we only want to see them happy.WE WANT TO SEE ALL OUR BUYERS HAPPY PAYMENT: Payment must be received in 2 days, if you do not pay with in 2 days, EBAY claim will be open. LOCAL FLORIDA PICK UP ALWAYS WELCOME BY APPOINTMENT ONLY & CASH ONLY Notify us BEFORE making payment & we will send you a revised invoice without shipping charges. Allow 24hrs notice before coming by to pick up your item Available days for Pickup: M-F 12 NOON-2:30PM We are located in the CORAL SPRINGS/COCONUT CREEK/MARGATE AREA.ALL PICK UP WILL BE DONE IN PUBLIC PLACE. ALL FLORIDA BUYER: ALL FL STATE BUYERS MUST PAY 7% SALES TAX, THIS IS A LAW, IF BUYER REFUSE TO PAY SALES TAX, THAN TRANSACTION WILL BE CANCEL AND BUYER WILL BE REPORTED TO EBAY. SHIPPING: Boxing and shipping via FedEx ground to addresses in the USA continental ONLY and shipping rate is rated to all 48 state, please do not ask for the lower shipping rate. Shipping is $45 (NONE REFUNDABLE ) FEDEX DO NOT DELIVER TO PO.BOX, MUST HAVE A VALID ADDRESS.ALASKA, HAWAII & PR BUYERS must ask for the shipping rate before bidding. ATTENTION: INTERNATIONAL BIDDERSALL INTERNATIONAL BUYERS MUST USE EBAY GLOBAL SHIPPING PROGRAM, I HAVE NOTHING TO DO WITH EBAY GLOBAL SHIPPING RATE, THIS BETWEEN BUYER AND EBAY, IF YOU DO NOT LIKE THE EBAY GLOBAL SHIPPING COST THAN PLEASE DO NOT BUY THE ITEM.

Sonics 600X (Bryston 5B-ST) Hi-Fi 3 Channel Amplifier EXCELLENT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 5B-ST) [ Listing is for 1 amp - however we have 10 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. While the 600X is THX certified, it is generally accepted that IMAX audio quality exceeds THX, Dolby and DTS standards in all areas. The Sonics 600X is effectively a rebadged Bryston 5B (see links below) and is a three channel power amplifier rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: Internal: 10A + 6A External: 8A + 5A Specifications: Power: 120 watts rms/ch @ 8 Ohms 200 watts rms/ch @ 4 Ohms Frequency response: 20 Hz - 20 kHz ± 0.01 dB Input impedance: 50 kOhms Damping factor: 500 Sensitivity: 0.75V rms for full output into 8 Ohms THD: 0.02% S/N: 112 dB Dimensions: 5-1/2 H x 19 W x 17 D Weight: 37 pounds While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Many audiophiles choose to send their amps to Bryston for full refurbishment - if you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. However, if for any reason the buyer chooses to return unit to PPI, the buyer is responsible for all return shipping costs. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 5B-ST) Hi-Fi 3 Channel Amplifier EXCELLENT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 5B-ST) [ Listing is for 1 amp - however we have 10 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. While the 600X is THX certified, it is generally accepted that IMAX audio quality exceeds THX, Dolby and DTS standards in all areas. The Sonics 600X is effectively a rebadged Bryston 5B (see links below) and is a three channel power amplifier rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: Internal: 10A + 6A External: 8A + 5A Specifications: Power: 120 watts rms/ch @ 8 Ohms 200 watts rms/ch @ 4 Ohms Frequency response: 20 Hz - 20 kHz ± 0.01 dB Input impedance: 50 kOhms Damping factor: 500 Sensitivity: 0.75V rms for full output into 8 Ohms THD: 0.02% S/N: 112 dB Dimensions: 5-1/2 H x 19 W x 17 D Weight: 37 pounds While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Many audiophiles choose to send their amps to Bryston for full refurbishment - if you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. However, if for any reason the buyer chooses to return unit to PPI, the buyer is responsible for all return shipping costs. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

PMC TLE 1 Active Subwoofer original RRP £2,650. Full working order and all drive units in very good condition Cabinet condition is a little scruffy in places and no cover for the control panel. Comes with floor spikes and a PDF copy of the user manual Will be very well packed and promptly sent via tracked courier delivery - or collect and save on the delivery charge. Description: The PMC TLE1 Active Sub Woofer is a combination of leading loudspeaker and amplifier design. This audiophile design is the result of much experience gained in the professional realm of Hollywood and research into room acoustics and ergonomics. Size and the aesthetics have played a major part in the creation of this radical new unit, which can be clearly seen in its tall slender form and tiny footprint. Ideal for all situations, especially where space is at a premium and the user has a keen eye for design.The two 61/2 inch custom drivers are driven by a true 150W, ultra low distortion audiophile power amplifier, based on one of Brystons world class designs. Within the elegant compact cabinet lies a true transmission line with an effective length of 3m / 91/2 Feet, which gives the PMC TLE1 Active Sub Woofer the ability to produce a flat frequency response down to 22Hz with real clarity and detail.This purist approach to low frequency reproduction finally gives a realistic option to those who wish to play high quality multi-channel recordings.Dynamic, accurate and articulate response at all listening levelsEase of placement producing a consistent in-room responseExtremely low distortionConsistent balance at all levelsTransmission Line enclosure produces astounding power and depthSeamless integration with surround or stereo channelsCrossover Frequency: Bryston designed amplifier Section: 150W RMSDimensions: H 550mm 21.6 W 200mm 7.80 D 545mm 21.5 + GrilleDrive Units: LF PMC 2 x Doped 170mm cast Magnesium Alloy ChassisEffective ATL™ Length: 3m 9.8ftFrequency Response: 22Hz-200HzInput Connectors: 2 x XLR, input Imp 20k OhmsWeight: 17.5kg 38.5lbs

Edwards Home Entertainment and Design, an appointed and displaying dealer for Bowers & Wilkins, Focal, NAIM, Parasound, Classe Audio, Rotel and Michi, Fyne Audio, Rel Acoustics, JL Audio, Perlisten, Marantz, Lumin, and Nordost, is offering this fantastic Bryston BHA-1 headphone amplifier. The BHA-1 will come complete with factory packaging and box.  Never sold to the public. Buy / Sell / Trade / Consign - Edwards Home Entertainment and Design (EHEAD) has been a premier seller of carefully selected, pre-loved high end audio equipment since 1997. Now an authorized dealer for Parasound (displaying JC-1+, HINT 6, JC-5, JC-3+), Bowers & Wilkins (displaying 801D4, 802D4, 803D4, 804D4, 805D4, 702S2 Signature Midnight Blue, 705S2 Signature), Classe Delta (displaying the Delta Pre, Delta Stereo, Delta Monos), Focal (displaying Scala EVO, Sopra3, Sopra 2), NAIM (displaying the SuperNAIT3), Rotel Michi (displaying the P5, S5), Fyne Audio (displaying F1-12, 502SP, F700), Marantz (displaying PM-10 Integrated, SA-10 Super Audio SACD/CD Player, TT-15S2 TurnTable), Rel Acoustics (displaying the Carbon Special, S/812 and S/512), Lumin (displaying the newest P1, T2, D2, and U2 Mini),  Perlisten (displaying the 7St, and D212), JL Audio (displaying the G213v2, F113v2, D110 subs), Nordost (displaying Norse and Leif series, with demo cases for in home trials), SolidSteel (displaying HyperSpike and S3 walnut), Finite Element (displaying Pagode).  EHEADAudio site can be located in South San Francisco on the web, with direct phone / voice / text support.  We are always looking to buy quality used gear. Despite listings that may indicate LOCAL PICK UP ONLY - this is just to facilitate posting of gear. Logistics is our specialty, we can facilitate packaging and shipping to and from anywhere in the country. If you are interested in our gear, please reach out and we can figure out a shipping solution that will work. Our shop is in South San Francisco - stop by and put your eyes and ears to work! CA residents must pay CA sales tax.

Edwards Home Entertainment and Design, an appointed and displaying dealer for Bowers & Wilkins, Focal, NAIM, Parasound, Classe Audio, Rotel and Michi, Fyne Audio, Rel Acoustics, JL Audio, Perlisten, Marantz, Lumin, and Nordost, is offering this fantastic Bryston BDA-2 DAC. The DAC will come complete with factory packaging and box.  Never sold to the public. Buy / Sell / Trade / Consign - Edwards Home Entertainment and Design (EHEAD) has been a premier seller of carefully selected, pre-loved high end audio equipment since 1997. Now an authorized dealer for Parasound (displaying JC-1+, HINT 6, JC-5, JC-3+), Bowers & Wilkins (displaying 801D4, 802D4, 803D4, 804D4, 805D4, 702S2 Signature Midnight Blue, 705S2 Signature), Classe Delta (displaying the Delta Pre, Delta Stereo, Delta Monos), Focal (displaying Scala EVO, Sopra3, Sopra 2), NAIM (displaying the SuperNAIT3), Rotel Michi (displaying the P5, S5), Fyne Audio (displaying F1-12, 502SP, F700), Marantz (displaying PM-10 Integrated, SA-10 Super Audio SACD/CD Player, TT-15S2 TurnTable), Rel Acoustics (displaying the Carbon Special, S/812 and S/512), Lumin (displaying the newest P1, T2, D2, and U2 Mini),  Perlisten (displaying the 7St, and D212), JL Audio (displaying the G213v2, F113v2, D110 subs), Nordost (displaying Norse and Leif series, with demo cases for in home trials), SolidSteel (displaying HyperSpike and S3 walnut), Finite Element (displaying Pagode).  EHEADAudio site can be located in South San Francisco on the web, with direct phone / voice / text support.  We are always looking to buy quality used gear. Despite listings that may indicate LOCAL PICK UP ONLY - this is just to facilitate posting of gear. Logistics is our specialty, we can facilitate packaging and shipping to and from anywhere in the country. If you are interested in our gear, please reach out and we can figure out a shipping solution that will work. Our shop is in South San Francisco - stop by and put your eyes and ears to work! CA residents must pay CA sales tax.

Bryston 4B 250 Watt 2 Channel Power Amplifier - XLR inputs - pro version Unit works great, minimal exterior wear Ships FEDEX, CONUS only. Worldwide shipping via ebay international shipping program.

Bryston 5B ST pro Original UK version with gain controls this is a 3 ch amplifier - it can be 2ch with ch1 and 2 bridged for high power and ch3 as its own ch see image of rear connections for that detail eg for bi amp center with higher power to bass, and 3rd ch to hf. 120w per ch 8 ohm, 200w per ch 4 ohm, I think 400w bridged 8 ohm (Please check that spec!) Or L,C,R in one amp

Sonics 600X (Bryston 5B-ST) Hi-Fi 3 Channel Amplifier EXCELLENT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 5B-ST) [ Listing is for 1 amp - however we have 10 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. While the 600X is THX certified, it is generally accepted that IMAX audio quality exceeds THX, Dolby and DTS standards in all areas. The Sonics 600X is effectively a rebadged Bryston 5B (see links below) and is a three channel power amplifier rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: Internal: 10A + 6A External: 8A + 5A Specifications: Power: 120 watts rms/ch @ 8 Ohms 200 watts rms/ch @ 4 Ohms Frequency response: 20 Hz - 20 kHz ± 0.01 dB Input impedance: 50 kOhms Damping factor: 500 Sensitivity: 0.75V rms for full output into 8 Ohms THD: 0.02% S/N: 112 dB Dimensions: 5-1/2 H x 19 W x 17 D Weight: 37 pounds While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Many audiophiles choose to send their amps to Bryston for full refurbishment - if you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. However, if for any reason the buyer chooses to return unit to PPI, the buyer is responsible for all return shipping costs. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0