TESTED, IN GOOD WORKING CONDITION

IN NICE COSMETIC CONDITION

Perfect function lightly used. Please magnify ALL the detailed pictures as they too are also my description of condition. DESCRIPTION- KEVLAR CONE, CAST ALUMINUM BASKET, RUBBER SURROUND, FIXED PHASE PLUGBRAND- B&W / BOWERS WILKINSMODEL- CDM7 SPECIAL EDITION( MAY FIT OTHER MODELS, BUYER TO VERIFY FITMENT)PART#- ZZ11029SIZE- APPROX. 6.625 OD X 3.375DCONDITION- VERY GOOD 8/10 RESISTANCE (METER) - 5 OHMRESISTANCE (RATED)- 8 OHMQTY- 1 EAPLEASE ASK QUESTIONS BEFORE BUYING. NO WARRANTY OR RETURNS. THANK YOU!IN VERY GOOD, USED CONDITION. FULLY TESTED, SOUND VERY GOOD. Sold As-is no return simply due to age, however, You can read my 24 year 100% seller feedback and bid with confidence. Expertly packed by me encased so that they can be fully insured and safely shipped to your door via Standard Ground.

B&W CDM 1 SE Special Edition Bowers & Wilkins Regal Lautsprecher 1 Paar Boxen? Regal Lautsprecher von Bowers & Wilkins CDM 1 SE (Special Edition) Angeboten werden 1 Paar hochwertige Regal Lautsprecher der High-End Schmiede Bowers & Wilkins mit sehr guten Klangeigenschaften. Optischer Zustand: Die Lautsprecher befinden sich allgemein im sehr guten und gepflegten Zustand, mit minimalen / leichten Gebrauchsspuren der Jahre. Nichtraucherhaushalt. Technischer Zustand: Die B&W Lautsprecher funktionieren einwandfrei. Hoch- und Tieftöner ohne mechanische Schäden (eingedrückt oder sonst irgendwas). Die Abdeckgitter sind ebenfalls dabei und sehen ebenfalls noch sehr gut aus. Die CDM 1 SE bestehen durch ein beeindruckendes Klangbild und eignen sich für anspruchsvolle Hörer, die ein erstklassiges Audioerlebnis suchen. Dem ambitionierten Hifi-Liebhaber müssen die technischen Daten nicht näher beschrieben werden. Hier in aller Kürze: Bauart: 2-Wege Bassreflex, Kompaktlautsprecher Chassis: Tieftöner: 1x 165mm Kevlar-Membran Hochtöner: 1x 26mm Kalotte Belastbarkeit (Nenn-/Musikb.): Empfohlene Verstärkerleistung: 30 - 120 W Wirkungsgrad: 88 dB (2.83V, 1m) Frequenzgang: 64 - 20.000 Hz (±2 dB) Übergangsbereiche: 3.000 Hz Impedanz: 8 Ohm (Minimum 4,5 Ohm) Abmessungen: 370 x 220 x 274 mm (H x B x T) Gute Stimme. Guter Zustand.

TESTED, IN GOOD WORKING CONDITION

TESTED, WORKS EXCELLENT, 100% AUTHENTIC TWEETER AND FACTORY B&W DIAPHRAGM

IN FAIR-GOOD CONDITION

WORKING CONDITION, OUT OF MARKET DIAPHRAGM

SELLING FOR PARTS OR REPAIRS,SPEAKER ON LEFT SIDE HAVE ORIGINAL TWEETER DIAPHRAGM AND IT WORKS GREAT. SPEAKER ON RIGHT SIDE HAVE FACTORY TWEETER WITH AFTERMARKET DIAPRAGM AND IT DOES NOT WORK. BOTH WOOFERS WORK GOOD SHIPPING WITH USPS OR UPS

Bowers and Wilkins B&W CDM1 SE Speakers in Black. According to WhatHiFi, these are one of the best seventeen B&W products ever! Classic, great sounding speakers in excellent condition. (Please see pics - there are a couple very small nicks which could easily be touched up with black sharpie to be invisible). *The black finish does accentuate any flaws. Woofers, tweeters and covers all in very good/ excellent condition. Please note: Bidding is starting low, as I have listed shipping as $150. These speakers are very solid, heavy speakers, which will be boxed within a box for secure (insured) shipping. Local pickup okay! Please feel free to ask any questions. Thanks!

Operation checked, with manual. This item was used together with an amp and CD player that I was selling on another site. Overall, it is clean, but there are scratches on the top surface of both units (please judge by the pictures). Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Perfect function lightly used. Please magnify ALL the detailed pictures as they too are also my description of condition. DESCRIPTION- KEVLAR CONE, CAST ALUMINUM BASKET, RUBBER SURROUND, FIXED PHASE PLUGBRAND- B&W / BOWERS WILKINSMODEL- CDM7 SPECIAL EDITION( MAY FIT OTHER MODELS, BUYER TO VERIFY FITMENT)PART#- ZZ11029SIZE- APPROX. 6.625 OD X 3.375DCONDITION- VERY GOOD 8/10 RESISTANCE (METER) - 5 OHMRESISTANCE (RATED)- 8 OHMQTY- 1 EAPLEASE ASK QUESTIONS BEFORE BUYING. NO WARRANTY OR RETURNS. THANK YOU!IN VERY GOOD, USED CONDITION. FULLY TESTED, SOUND VERY GOOD. Sold As-is no return simply due to age, however, You can read my 24 year 100% seller feedback and bid with confidence. Expertly packed by me encased so that they can be fully insured and safely shipped to your door via Standard Ground.

ORIGINAL-OWNER MATCHING PAIR OF WORLD-RENOWN BOWERS & WILKINS TOWER LOUDSPEAKERS NOS. 015025 & 015026 - BEST CONDITION ON EBAY (AND LIKELY ONLINE ANYWHERE)! NOTE 1: Smoke/pet-free home/owner. NOTE 2: Speakers babied, not abused, by audiophile! NOTE 3: See my companion eBay listings for B&W 120W CDM CSE Center Channel Speaker & for B&W 500W ASW2500 Active Subwoofer! BUY WITH CONFIDENCE: 100% Positive Feedback over 3067+ Transactions over 20+ Years!

I used these as a side channel, a move and change in space requirements has necessitated switching to in-ceiling speakers. I have been very happy with the CDM1 SE; excellent clean treble and the bass response has been impressive. To be sure that they were performing at the top of their game, I had the tweeters serviced, the ferofluid on older tweeters tend to lose their fluidity. Tweeter coil channels were cleaned and new ferofluid added. Coils were cleaned and in in good condition and everything performing as it should! I take great pride in my stereo systems and make sure everything is performing to its fullest potential! These were missing original tweeter grills which have non-original replacements but serve the purpose for protection! Missing original jumpers on one speaker, but I fabricated replacements. The CDM1 SE is a two-way design rated at 88dB/2.83V/m sensitivity. Nominal impedance is rated at 8 ohms, going down to a minimum of 4.5 ohms. The 6½ Kevlar (woven fabric) woofer/midrange driver was redesigned for the CDM1 SE using some of the same technology B&W developed for its upmarket Matrix models. Notice the bullet-shaped nose cone smack in the middle of the woofers voice-coil, in lieu of a dustcap. B&W calls it a dispersion modifier. The tweeter is a 1 metal-dome unit. FROM A WELL KNOWN AUDIO REVIEW SIGHT. These speakers are not just warmly recommended—theyre wildly recommended. Bass-extension aside, along with the ability, perhaps, to fill a very large room with loud music, the B&M CDM 1 SE comes damned close to Class A at a price more in keeping with Class C. If youre in the market for speakers you must audition these. Youll then be able then to upgrade your electronics way beyond the price of the speakers!—Sam Tellig Bowers and Wilkins B&W CDM1 SE Special Edition Click images to enlarge Description I used these as a side channel, a move and change in space requirements has necessitated  switching to in-ceiling speakers. I have been very happy with the CDM1 SE; excellent clean treble and the bass response has been impressive. To be sure that they were performing at the top of their game, I had the tweeters serviced, the ferofluid on older tweeters tend to lose their fluidity. Tweeter coil channels were cleaned and new ferofluid added. Coils were cleaned and in in good condition and everything performing as it should! I take great pride in my stereo systems and make sure everything is performing to its fullest potential! The speakers were missing original tweeter grills which have non-original replacements but serve the purpose for protection! Missing original jumpers on one speaker, but I fabricated replacements.   SPECIFICATIONS:   Method 2-Way, 2-Speaker, Bass Reflex System, Bookshelf Type Unit For low band : 16.5 cm cone type For high-pass : 2.6 cm dome type Frequency characteristic 46 Hz to 30 kHz -6dB Frequency response 58 Hz ~ 20 kHz ± 3 dB (free field) Directional Longitudinal deviation ± 2dB10 degrees or more Lateral deviation ± 2dB40 degrees or more Output sound pressure level 88dB/2.83V/m Distortion factor Second and third harmonic distortion factor : less than 1% (100 Hz to 20 kHz, 90 dB, 1m) Nominal impedance 8 ? Crossover frequency 3kHz Compatible  amplifier output 30W ~ 120W External dimensions Width 220x Height 370x Depth 274 mm Weight 8.5kg Sold separately : Sound Anchors Stand SA-CDM (1 unit, ¥ 23,000) External dimensions Width 317x Height 615x Depth 310 mm Weight 10.2kg FROM A WELL KNOWN AUDIO REVIEW SIGHT. These speakers are not just warmly recommended—theyre wildly recommended. Bass-extension aside, along with the ability, perhaps, to fill a very large room with loud music, the B&M CDM 1 SE comes damned close to Class A at a price more in keeping with Class C. If youre in the market for speakers you must audition these. Youll then be able then to upgrade your electronics way beyond the price of the speakers!—Sam Tellig PLEASE READ THE FOLLOWING IMPORTANT INFORMATION  By Bidding on this item, you agree to abide by these terms: I will ONLY ship to the lower 48 United States.  Damaged or D.O.A. If the item arrives damaged or DOA, contact me immediately so a claim can be made against the shipper. Retain the box(es) and packaging. So-called Hidden Damage may not be obvious from the condition of the boxes. This includes DOA, or partially functioning items that have no visible damage. Shippers have a short deadline for making claims for Hidden Damage. You agree to notify me of any hidden damage within 3 days of delivery. If you fail to notify me of hidden damage, including any item that arrives DOA, in time for the claim to be filed before the deadline expires, and if the shipper denies the claim on the grounds that it was reported late, then you agree to relinquish your right to a refund. My experience has been that timely, verifiable claims are always paid by UPS and Fedex. Late claims may be denied. NO QUESTIONS RETURN: If you would like to return an undamaged, unaltered item, you may do so within 14 business days of delivery, for a refund of the sale price excluding S&H. The only exception to this are items being sold as is and is stated so in the auction. If you tear or tamper with the sealed wrapper, container or blister pack of a new or collectible item, or open its previously unopened box, then it cannot be returned for a full refund. If an item is returned that has been tampered with, or that arrives damaged or DOA, no refund, or a partial refund at my discretion, will be made. For this reason, be certain to insure the return shipment for full value. It is very important that you notify me before making the return.  INACCURATE DESCRIPTION: I take great care to test each item, describe accurately and provide detailed photographs of each item that I sell. However, if there is ever an item that does not meet your expectations, please contact us, and we will find a solution. Return requests must be made within 30 days of purchase. Full refund plus return shipping will be issued when item is not as described. Refunds issued for any other reason will not include shipping costs. If you feel that my item description was substantially inaccurate, and you would like to present your own terms for a full or partial refund, then you shall contact me with your request within 3 days of delivery. I promise to respond promptly, fairly and responsibly.  CHECK MY FEEDBACK: You will see that I do everything in my power to insure complete satisfaction. If you have any problem on a sale, please contact me and we will resolve it. Images sell! Get Supersized Images & Free Image HostingCreate your brand with Auctivas Customizable Templates. Attention Sellers - Get Templates Image Hosting, Scheduling at Auctiva.com. Track Page Views WithAuctivas Counter

I used these as a side channel, a move and change in space requirements has necessitated switching to in-ceiling speakers. I have been very happy with the CDM1 SE; excellent clean treble and the bass response has been impressive. To be sure that they were performing at the top of their game, I had the tweeters serviced, the ferofluid on older tweeters tend to lose their fluidity. Tweeter coil channels were cleaned and new ferofluid added. Coils were cleaned and in in good condition and everything performing as it should! I take great pride in my stereo systems and make sure everything is performing to its fullest potential! These were missing original tweeter grills which have non-original replacements but serve the purpose for protection! Missing original jumpers on one speaker, but I fabricated replacements. The CDM1 SE is a two-way design rated at 88dB/2.83V/m sensitivity. Nominal impedance is rated at 8 ohms, going down to a minimum of 4.5 ohms. The 6½ Kevlar (woven fabric) woofer/midrange driver was redesigned for the CDM1 SE using some of the same technology B&W developed for its upmarket Matrix models. Notice the bullet-shaped nose cone smack in the middle of the woofers voice-coil, in lieu of a dustcap. B&W calls it a dispersion modifier. The tweeter is a 1 metal-dome unit. FROM A WELL KNOWN AUDIO REVIEW SIGHT. These speakers are not just warmly recommended—theyre wildly recommended. Bass-extension aside, along with the ability, perhaps, to fill a very large room with loud music, the B&M CDM 1 SE comes damned close to Class A at a price more in keeping with Class C. If youre in the market for speakers you must audition these. Youll then be able then to upgrade your electronics way beyond the price of the speakers!—Sam Tellig Bowers and Wilkins B&W CDM1 SE Special Edition Click images to enlarge Description I used these as a side channel, a move and change in space requirements has necessitated  switching to in-ceiling speakers. I have been very happy with the CDM1 SE; excellent clean treble and the bass response has been impressive. To be sure that they were performing at the top of their game, I had the tweeters serviced, the ferofluid on older tweeters tend to lose their fluidity. Tweeter coil channels were cleaned and new ferofluid added. Coils were cleaned and in in good condition and everything performing as it should! I take great pride in my stereo systems and make sure everything is performing to its fullest potential! The speakers were missing original tweeter grills which have non-original replacements but serve the purpose for protection! Missing original jumpers on one speaker, but I fabricated replacements.   SPECIFICATIONS:   Method 2-Way, 2-Speaker, Bass Reflex System, Bookshelf Type Unit For low band : 16.5 cm cone type For high-pass : 2.6 cm dome type Frequency characteristic 46 Hz to 30 kHz -6dB Frequency response 58 Hz ~ 20 kHz ± 3 dB (free field) Directional Longitudinal deviation ± 2dB10 degrees or more Lateral deviation ± 2dB40 degrees or more Output sound pressure level 88dB/2.83V/m Distortion factor Second and third harmonic distortion factor : less than 1% (100 Hz to 20 kHz, 90 dB, 1m) Nominal impedance 8 ? Crossover frequency 3kHz Compatible  amplifier output 30W ~ 120W External dimensions Width 220x Height 370x Depth 274 mm Weight 8.5kg Sold separately : Sound Anchors Stand SA-CDM (1 unit, ¥ 23,000) External dimensions Width 317x Height 615x Depth 310 mm Weight 10.2kg FROM A WELL KNOWN AUDIO REVIEW SIGHT. These speakers are not just warmly recommended—theyre wildly recommended. Bass-extension aside, along with the ability, perhaps, to fill a very large room with loud music, the B&M CDM 1 SE comes damned close to Class A at a price more in keeping with Class C. If youre in the market for speakers you must audition these. Youll then be able then to upgrade your electronics way beyond the price of the speakers!—Sam Tellig PLEASE READ THE FOLLOWING IMPORTANT INFORMATION  By Bidding on this item, you agree to abide by these terms: I will ONLY ship to the lower 48 United States.  Damaged or D.O.A. If the item arrives damaged or DOA, contact me immediately so a claim can be made against the shipper. Retain the box(es) and packaging. So-called Hidden Damage may not be obvious from the condition of the boxes. This includes DOA, or partially functioning items that have no visible damage. Shippers have a short deadline for making claims for Hidden Damage. You agree to notify me of any hidden damage within 3 days of delivery. If you fail to notify me of hidden damage, including any item that arrives DOA, in time for the claim to be filed before the deadline expires, and if the shipper denies the claim on the grounds that it was reported late, then you agree to relinquish your right to a refund. My experience has been that timely, verifiable claims are always paid by UPS and Fedex. Late claims may be denied. NO QUESTIONS RETURN: If you would like to return an undamaged, unaltered item, you may do so within 14 business days of delivery, for a refund of the sale price excluding S&H. The only exception to this are items being sold as is and is stated so in the auction. If you tear or tamper with the sealed wrapper, container or blister pack of a new or collectible item, or open its previously unopened box, then it cannot be returned for a full refund. If an item is returned that has been tampered with, or that arrives damaged or DOA, no refund, or a partial refund at my discretion, will be made. For this reason, be certain to insure the return shipment for full value. It is very important that you notify me before making the return.  INACCURATE DESCRIPTION: I take great care to test each item, describe accurately and provide detailed photographs of each item that I sell. However, if there is ever an item that does not meet your expectations, please contact us, and we will find a solution. Return requests must be made within 30 days of purchase. Full refund plus return shipping will be issued when item is not as described. Refunds issued for any other reason will not include shipping costs. If you feel that my item description was substantially inaccurate, and you would like to present your own terms for a full or partial refund, then you shall contact me with your request within 3 days of delivery. I promise to respond promptly, fairly and responsibly.  CHECK MY FEEDBACK: You will see that I do everything in my power to insure complete satisfaction. If you have any problem on a sale, please contact me and we will resolve it. Images sell! Get Supersized Images & Free Image HostingCreate your brand with Auctivas Customizable Templates. Attention Sellers - Get Templates Image Hosting, Scheduling at Auctiva.com. Track Page Views WithAuctivas Counter

ONE SPEAKER ONLY,TESTED,WORKS GOOD, GENUINE, ALL ORIGINAL SHIPPING WITH USPS OR UPS

Up for auction is a beautiful pair of high-end speakers from B&W Bowers & Wilkins - the CDM 1- SE model. One owner, These speakers are in excellent working condition and have a beautiful Black finish. Made of high-quality wood material, they have an impressive RMS Power of 120 W and an impedance of 8 Ohms, also can be Bi-amped, The speakers are perfect for those who value great sound quality and are looking for a wired connectivity option. These Front Right and Left Speakers are approx 12 deep x, 15 high, x 9 wide. The speakers are manufactured in the United Kingdom.Speaker will be packed for a safe shipment, NO RESERVE, See pictures for more information, Thanks for looking GOOD LUCK

DESCRIPTION iSold It Glendale Arizona is not the owner or seller of these goods, but merely a bailee acting on behalf of the seller to facilitate the sale of the goods by holding the goods until such time as a sale is completed and the goods are shipped to the buyer. iSold It Glendale Arizona has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale. iSold It Glendale Arizona makes no express or implied warranties or representations regarding the condition or suitability of the goods and to the extent allowed by law, specifically disclaims any express or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. Powered by CrossPostit

ORIGINAL-OWNER WORLD-RENOWN BOWERS & WILKINS CENTER CHANNEL SPEAKER NO. 009034 - BEST CONDITION ON EBAY (AND LIKELY ONLINE ANYWHERE)! NOTE 1: Smoke/pet-free home/owner. NOTE 2: Speaker babied, not abused, by audiophile! NOTE 3: See my companion eBay listings for B&W 150W CDM 7 SE Pair Front Left & Right floor Tower Loud Speakers & for B&W 500W ASW2500 Active Subwoofer! BUY WITH CONFIDENCE: 100% Positive Feedback over 3032+ Transactions over 20+ Years!

ORIGINAL-OWNER WORLD-RENOWN BOWERS & WILKINS CENTER CHANNEL SPEAKER NO. 009034 - BEST CONDITION ON EBAY (AND LIKELY ONLINE ANYWHERE)! NOTE 1: Smoke/pet-free home/owner. NOTE 2: Speaker babied, not abused, by audiophile! NOTE 3: See my companion eBay listings for B&W 150W CDM 7 SE Pair Front Left & Right floor Tower Loud Speakers & for B&W 500W ASW2500 Active Subwoofer! BUY WITH CONFIDENCE: 100% Positive Feedback over 3000+ Transactions over 20+ Years!

ORIGINAL-OWNER MATCHING PAIR OF WORLD-RENOWN BOWERS & WILKINS TOWER LOUDSPEAKERS NOS. 015025 & 015026 - BEST CONDITION ON EBAY (AND LIKELY ONLINE ANYWHERE)! NOTE 1: Smoke/pet-free home/owner. NOTE 2: Speakers babied, not abused, by audiophile! NOTE 3: See my companion eBay listings for B&W 120W CDM CSE Center Channel Speaker & for B&W 500W ASW2500 Active Subwoofer! BUY WITH CONFIDENCE: 100% Positive Feedback over 3000+ Transactions over 20+ Years!

Bowers and Wilkins CDM1 Special Edition Weiche ZZ10901 CDM1-SE Voll funktionsfähig, gebrauchte und geprüfte Ware mit Gebrauchsspuren.Bitte die Bilder genau ansehen, die sind Teil der Artikelbeschreibung. Als Kleinunternehmer im Sinne von § 19 Abs. 1 UStG wird keine Umsatzsteuer berechnet

Bowers and Wilkins CDM1 Loudspeakers Set of 2 Excellent used condition Method: 2-Way, 2-Speaker, Bass Reflex System, Bookshelf ???? Unit: For low band: 16.5 cm cone type, For high-pass: 2.5 cm dome type Playback frequency band: 48 Hz to 30 kHz -6dB Playback frequency response: 60 Hz to 25 kHz + 3 dBNominal impedance: 8 & (minimum 4.6 2) Sensitivity: 88dB/2.83V/m Crossover frequency: 4kHz Power Handling (Compatible AmplifierOutput): 50W ~ 120W (at 8 Q) External dimensions: Width 220x Height 393xDepth 290 mm Weight: 9.5kg Sold separately: Speaker Stand FS-CDM (1 set of 2, ¥ 40,000) External dimensions: Width 245x Height 602× Depth 300 mm

Die Bowers & Wilkins CDM 1 SE Lautsprecher sind ein High-End-Produkt, das durch seine hervorragende Klangqualität und das stilvolle schwarze Holzgehäuse beeindruckt. Mit einer Impedanz von 8 Ohm ist es ein leistungsstarkes System, das für einen beeindruckenden Sound sorgt. Diese Standlautsprecher sind in ausgezeichnetem Zustand und werden mit passenden Ständern geliefert. Lediglich auf der Oberseite einer Box ist eine leichte Beschädigung (s. Bild). Die Lautsprecher funktionieren einwandfrei. Es handelt sich hierbei um ein Paar mit fortlaufender Seriennummer. Mit dabei sind die unbeschädigten Frontabdeckungen, die Schaumstoffstopfen für die Bassreflexöffnungen sowie eine Bedienungsanleitung. Die Lautsprecher können vor Ort gern an hochwertigen Komponenten getestet werden. Versand erfolgt im gut gepolsterten Karton per Dhl auf eigene Gefahr. Das neue Gewährleistungsrecht fordert folgende Angaben: Ich bin kein Händler! Der Verkauf erfolgt unter Ausschluss jeglicher Sachmängelhaftung. Die Haftung auf Schadenersatz wegen Verletzungen von Gesundheit, Körper oder Leben und grob fahrlässiger und/oder vorsätzlicher Verletzungen meiner Pflichten als Verkäufer bleibt davon unberührt. Keine Nachverhandlungen. Kein Kauf auf Probe, keine Warenrücknahme, keine Geldrückgabe. Durch Ihren Kauf stellen Sie mich von dieser Gewährleistungsgarantie ausdrücklich frei. Sie erklären sich damit einverstanden, auf die Ihnen nach neuem EU-Recht gesetzlich zustehende Gewährleistung oder Garantie bei Gebrauchtwaren zu verzichten. Das Versandrisiko geht zulasten des Käufers. Kaufen Sie nicht, wenn Sie mit diesen Regeln nicht einverstanden sind! Markennamen sind Eigentum des Rechtsinhabers und werden hier nur genannt um den Artikel zu beschreiben.