Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Good working order, some minor marks through use

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Bose AmPlus 100 FreeSpace Verstärker Amplifier Gebraucht, Technisch Einwandfrei Privatverkauf unter Ausschluss jeglicher Garantie und Gewährleistung.Kein Umtausch! Keine Rücknahme!

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Bose AmPlus 100 System. Gebraucht.