B&O Beogram 1800 Type 5213 Bang and Olufsen Teak & Chrome Record Deck Spares. Spares repairs only Motor doesn’t appear to work, may be seized. Belt had also slipped off, it is old and stretched and would also need replacing, will include it with record deck No cartridge or stylus included, have removed it to sell separately. When I plugged deck into an amplifier and light brushed the stylus a sound could be heard. So sound reproduction part of deck appears to be working fine so issues are hopefully confined to mechanical parts. Unit connects to amplifier via male 5 pin connector. Cable approx 3ft long Chrome platter has some small marks and knocks. Teak wooden surround/ plinth is good with some knocks and marks. Lift off lid is chrome frame with a dark but clear plastic top, top is marked and scuffed but not cracked. Lid is a lift off only and is not hinged or attached to deck and in any way When investigating the non functioning of deck I took platter apart. When I did this I discovered the foam layer beneath metal platter had degraded and fell apart when touched. I cleaned this away and put back together without replacing it. As a result middle of deck stands higher than it would have done, see photos. All other parts including the clips have been put back on exactly as they were. Arm is good condition, some light marks. Arm is held in position in its rest by small plastic clip that pulls down into place, see photos Unit is fitted with a UK hardwired mains power lead Colour is Silver/Chrome and Teak/ Wood plinth Unit measures 44cm across the front x 32.5cm deep x 14cm tall (lid on)