The Benchmark DAC3 HGC in black is a high-quality audiophile DAC that is compatible with universal devices. This used but unit works perfectly, providing exceptional sound quality for your home audio setup. With its sleek black design and reliable performance, this Benchmark DAC3 HGC is a great choice for audiophiles looking to enhance their listening experience. If you are not familiar with Benchmark, do some research, very highly recommended and rated by the industry , buyer pays $25 shipping USA lower 48

The Benchmark DAC3 HGC in black is a high-quality audiophile DAC that is compatible with universal devices. This used but unit works perfectly, providing exceptional sound quality for your home audio setup. With its sleek black design and reliable performance, this Benchmark DAC3 HGC is a great choice for audiophiles looking to enhance their listening experience. If you are not familiar with Benchmark, do some research, very highly recommended and rated by the industry , buyer pays $25 shipping USA lower 48

Der Benchmark DAC3 B ist ein Referenz Digital-Analog-Wander der Absoluten Spitzenklasse. Zahlreiche Tests belegen die Überlegenheit der Produkte, zuletzt in diesem Sommer in der Zeitschrift FIdelity. Das Vorführgerät ist neuwertig und technisch/klanglich den aktuellen 2024 Geräten identisch. Das Gerät ist mit Original Zubehör inkl. EU Netzkabel und in Original Verpackung Neupreis ist 2.390 Euro (Benchmark Deutschland) Ausführung in Schwarz Der Versand erfolgt per DHL in 3-5 Tagen nach Zahlung

Der Benchmark DAC3 B ist ein Referenz Digital-Analog-Wander der Absoluten Spitzenklasse. Zahlreiche Tests belegen die Überlegenheit der Produkte, zuletzt in diesem Sommer in der Zeitschrift FIdelity. Das Vorführgerät ist neuwertig und technisch/klanglich den aktuellen 2024 Geräten identisch. Das Gerät ist mit Original Zubehör inkl. EU Netzkabel und in Original Verpackung Neupreis ist 2.390 Euro (Benchmark Deutschland) Ausführung in Schwarz Der Versand erfolgt per DHL in 3-5 Tagen nach Zahlung

In great condition! Comes with the black faceplate attached as well as the silver face plate and rack mount extension, as well as 2 benchmark XLR cables. This is basically the best there is in transparency and snr. I’ve been using it with the AHB2 and I’ve truly enjoyed it. If you have any questions feel free to ask. Thanks.

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies Benchmark DAC3 HGC DAC; D/A Converter Product SKU: 63920 Age: 4 Years Tobacco Exposure: No MSRP: $2399 Serial Number: 20530688 # of Owners: 1 Service History: None Cosmetic Description: Excellent condition with no notable blemishes. What is Included: DAC, Remote, Power cable, Factory packaging Other Notes: The DAC3 delivers outstanding musical detail and precise stereo imaging. It employs an advanced high-headroom digital filter design, and a high-sample-rate Asynchronous USB Audio interface. All inputs are fully isolated from interface jitter by Benchmarks new UltraLock3™ jitter attenuation system. - Benchmark Review 3 Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Review 2 Shipping: Cost to ship this item within the contiguous United States is a flat rate of $37- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies Benchmark DAC3 HGC DSD DAC Product SKU: 62809 # of Owners: 1 Service History: None Age: 5 Years Tobacco Exposure: No MSRP: $2399 Cosmetic Description: Very good condition with minimal visible cosmetic wear including a few tiny nicks along the top edge of the faceplate. Outstanding condition overall - this will please even the most discerning audiophile. What is Included: DAC, Remote, Trigger Cable, Power cable, Manual, Factory packaging Other Notes: The DAC3 delivers outstanding musical detail and precise stereo imaging. It employs an advanced high-headroom digital filter design, and a high-sample-rate Asynchronous USB Audio interface. All inputs are fully isolated from interface jitter by Benchmarks new UltraLock3™ jitter attenuation system. Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Cost to ship this item within the contiguous United States is a flat rate of $37- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.

Das Benchmark Media DAC3 HGC ist ein Diegital-Ananlog-Wandler, ein Vorverstärker und ein hochklassiger Kopfhöhrerverstärker auf Studioniveau. Das referenz 2 Kanal DAC basiert auf dem ESS Technologies ES9028PRO converter chip.Verkauf mit Originalverpackung, Handbuch, USB Kabel, Netzkabel (Internatiomal), alternatives Netzkabel für Betrieb an deutschen Stromnetz, Toslink Digital Kabel, 12v Trigger, Fernbedienung Gerät funktioniert sowohl mit 110 als auch mit 220V. Sample Rate Display Word Length Display5 Digital Inputs2 Stereo Analog Inputs (2 RCA)3 Stereo Analog Outputs (2 RCA, 1 XLR)Digital Pass ThroughNative DSD ConversionPolarity SwitchAsynchronous USB 2.0Home Theater BypassBi-Directional 12 Volt TriggerPower SwitchLow Power ConsumptionES9028PRO Converter Keine Rücknahme oder Gewährleistung da Privatverkauf.

Das Benchmark Media DAC3 HGC ist ein Diegital-Ananlog-Wandler, ein Vorverstärker und ein hochklassiger Kopfhöhrerverstärker auf Studioniveau. Das referenz 2 Kanal DAC basiert auf dem ESS Technologies ES9028PRO converter chip.Verkauf mit Originalverpackung, Handbuch, USB Kabel, Netzkabel (Internatiomal), alternatives Netzkabel für Betrieb an deutschen Stromnetz, Toslink Digital Kabel, 12v Trigger, Fernbedienung Gerät funktioniert sowohl mit 110 als auch mit 220V. Sample Rate Display Word Length Display5 Digital Inputs2 Stereo Analog Inputs (2 RCA)3 Stereo Analog Outputs (2 RCA, 1 XLR)Digital Pass ThroughNative DSD ConversionPolarity SwitchAsynchronous USB 2.0Home Theater BypassBi-Directional 12 Volt TriggerPower SwitchLow Power ConsumptionES9028PRO Converter Keine Rücknahme oder Gewährleistung da Privatverkauf.

Benchmark DAC3 HGC - Digital to Analog Audio Converter Includes Remote, Owners Manual, Power Cord, Spare Fuses, Original Box & Packing Materials. Condition is Like New. One Owner. Benchmark DAC3 HGC: The Ultimate High-Resolution DAC Experience unparalleled audio fidelity with the Benchmark DAC3 HGC, a state-of-the-art digital-to-analog converter designed for discerning audiophiles and professionals alike. Engineered with cutting-edge technology, this DAC delivers breathtaking sound quality, ensuring that every note is reproduced with stunning clarity and precision. Key Features: High-Resolution Audio: Capable of processing PCM audio up to 192kHz and DSD64, the DAC3 HGC captures the full spectrum of your music, revealing details you never knew existed. Advanced Digital Signal Processing: The DAC3 HGC utilizes proprietary technology for jitter elimination and superior digital filtering, providing a clean and accurate signal path. Exceptional Output Stage: With a fully balanced output design, this DAC offers low distortion and noise, making it ideal for both studio use and high-end home audio systems. Multiple Connectivity Options: Featuring USB, optical, and coaxial inputs, the DAC3 HGC is compatible with a wide range of devices, allowing for seamless integration into your existing setup. Headphone Amplifier: Equipped with a high-performance headphone output, the DAC3 HGC is perfect for private listening sessions, delivering rich, detailed sound through any headphones. Whether you’re mixing tracks in a professional studio or enjoying your favorite albums at home, the Benchmark DAC3 HGC elevates your audio experience to new heights. Discover the difference that precision engineering and high-quality components can make in your sound reproduction. Upgrade to the Benchmark DAC3 HGC and hear your music like never before. A New Reference - Going Beyond the Legendary DAC1 and DAC2The DAC3 is Benchmarks newest 2-channel D/A converter featuring the new ESS Technologies ES9028PRO converter chip. The DAC3 converter has lower THD and THD+N noise than Benchmarks DAC2 converter.Benchmarks DAC1 and DAC2 D/A converter families have been the reference to which other converters have been compared. It is rare to find a converter review that does not draw comparisons to the DAC1 or the DAC2. Benchmark converters are in daily use at many of the worlds finest recording studios and mastering rooms. Benchmark converters are also enjoyed by thousands of audiophiles. Benchmark has raised the bar again ... the DAC3 defines a new reference.Reference PerformanceThe DAC3 delivers outstanding musical detail and precise stereo imaging. It employs an advanced high-headroom digital filter design, and a high-sample-rate Asynchronous USB Audio interface. All inputs are fully isolated from interface jitter by Benchmarks new UltraLock3™ jitter attenuation system.Internal digital processing and conversion is 32-bits, and this processing includes 3.5 dB of headroom above 0 dBFS. This headroom prevents the DSP overloads that commonly occur in other D/A converters.Four balanced 32-bit D/A converters are summed together to create each balanced analog output. This 4:1 summation provides a 6 dB noise reduction, and gives the DAC3 industry-leading performance.DAC3 vs. DAC2The DAC3 builds upon Benchmark’s highly successful DAC2 product family. The DAC3 maintains the familiar DAC2 form factor and feature set, but adds the higher performance available from the new ES9028PRO D/A converter. The DAC3 offers the following improvements over the DAC2:Active 2nd Harmonic CompensationActive 3rd Harmonic CompensationLower THD+NLower passband rippleImproved frequency responseFaster PLL lock timesFaster switching between input signalsDAC3 vs. DAC1The DAC3 and DAC2 added these features that were not found on the DAC1:Asynchronous 192kHz USB Audio 2.032-bit D/A conversion systemWord Length DisplaySample Rate DisplayPolarity ControlDirect DSD D/A Conversion-20 dB DIMBi-Directional 12V TriggerPower Switch with Auto-On FunctionHome Theater BypassDigital Pass-ThroughHigh-Headroom DSPDual-Domain Hybrid Gain ControlAdditional I/ONative DSD ConversionAll digital inputs on the DAC3 support native 192 kHz PCM or DSD64 conversion. From any input, DSD is transported with bit accuracy over DoP 1.1. DSD and PCM are both natively converted to analog. There are no DSD to PCM or PCM to DSD conversions to compromise the quality of the music. The DAC3 conversion system seamlessly switches between native PCM and native DSD conversion. DSD over DoP 1.1 is supported by many media players, and DSD downloads are now available from several sources.Direct Connectivity to Power AmplifiersBenchmark DAC1, DAC2, and DAC3 converters are designed to directly drive power amplifiers and speakers. Benchmark converters feature adjustable low-impedance passive attenuators at the XLR outputs that can be used to optimize the interface to the power amplifier (or powered monitor). This unique Benchmark feature optimizes the gain staging between the DAC and the power amplifier. Proper gain staging cannot be overemphasized. When audio stages are properly matched, each component in the audio chain is able to operate at its optimum signal level, and the system performance is significantly improved.Sonically-Neutral Studio MonitoringAll Benchmark converters are designed for maximum transparency. This transparency is absolutely essential in the studio monitoring chain. For this reason, DAC3 converters are ideal for critical reference-quality professional systems. Unlike many competing products, the DAC3 is not designed to add euphonic coloration to the audio. Instead it is designed to be as uncolored and natural as possible.Step Into the StudioWhen Benchmarks professional converters are used in hi-fi applications, studio-quality sound can be enjoyed in a home environment. Enjoy pure music without any coloration from the electronics. Hear the music exactly the way it was heard in the studio, and exactly the way the artists intended.Discover the natural, uncolored, analog sound of the DAC3.Sit in the Performance SpaceTransparent sound can go beyond replicating the studio experience. Recordings that have been produced with a natural and unprocessed sound can transport you to the performance space. But, this can only happen when the entire playback chain is selected for maximum transparency.This experience of being there cannot be created by systems that are designed to add warmth or euphonic color to the music. DAC3 TechnologiesHarmonic CompensationHybrid Gain ControlUltraLock3™ Jitter Attenuation SystemHigh-Headroom DSPMulti-Mode Asynchronous USB Audio SystemQuad 32-bit balanced D/A Conversion SystemDistributed Power RegulationHarmonic CompensationThe ES9028PRO has two distortion compensation systems that independently remove most of the 2nd and 3rd harmonic distortion in the D/A converter. Benchmarks ultra-clean analog output stages allow these systems to be fully leveraged in the DAC3. To the best of our knowledge, no other D/A converter has lower THD than the Benchmark DAC3.Hybrid Gain ControlHGC is Benchmarks unique Hybrid Gain Control system. The DAC3 combines active analog gain control, passive low-impedance attenuators, a 32-bit digital gain control, and a servo-driven volume control. All inputs are controlled by the rotary volume control. This volume control moves in response to commands from the remote control. Analog inputs are never converted to digital, and digital inputs never pass through an analog potentiometer. Digital inputs are precisely controlled in the 32-bit DSP system. The DSP system preserves precise L/R balance, and precise stereo imaging, while avoiding any source of noise and distortion.Benchmarks unique passive output attenuators provide distortion-free gain reduction without reducing the dynamic range of the converter. The attenuators optimize the gain staging between the DAC3 and the power amplifier. This optimization is absolutely essential for maximizing the dynamic range of the entire playback system. Much of the success of the DAC1 and DAC2 converters can be attributed to the passive output attenuators. Musical details can be obscured by system noise whenever a preamplifier and power amplifier are improperly matched. The HGC system will make full use of your power amplifiers dynamic range. Experience new details in your favorite recordings.UltraLock3™ Jitter Attenuation SystemUltraLock3™ is an improved version of the UltraLock2™ system used in the DAC2 product family. UltraLock3™ locks with precise phase accuracy in only 6 ms. In contrast, the UltraLock2™ system required 400 ms. Both UltraLock™ systems provide virtually perfect jitter attenuation, but the lightning-fast lock time of the new UltraLock3™ will be appreciated by many of our users.DSP processing is 32-bits, DSP headroom is 3 dB, sample rate is 211 kHz, and jitter-induced distortion and noise is at least 140 dB below the level of the music - well below the threshold of hearing. Benchmarks UltraLock3™ system eliminates all audible jitter artifacts.High Headroom DSP - with 3.5 dB Excess Digital HeadroomAll of the digital processing in the DAC3 is designed to handle signals as high as +3.5 dBFS. Most digital systems clip signals that exceed 0 dBFS. The 0 dBFS limitation seems reasonable, as 0 dBFS is the highest sinusoidal signal level that can be represented in a digital system. However, a detailed investigation of the mathematics of PCM digital systems will reveal that inter-sample peaks may reach +3.01 dBFS while individual samples never exceed 0 dBFS. These inter-sample peaks are common in commercial releases, and are of no consequence in a PCM system until they reach an interpolation process. But, for a variety of reasons, virtually all audio D/A converters use an interpolation process. The interpolation process is absolutely necessary to achieve 24-bit state-of-the art conversion performance. Unfortunately, inter-sample peaks exceeding 0 dBFS cause clipping in most interpolators. This clipping produces distortion products that are non-harmonic and non-musical . We believe these broadband distortion products often add a harshness or false high-frequency sparkle to digital reproduction. The DAC3 avoids these problems by maintaining at least 3.5 dB of headroom in the entire conversion system. We believe this added headroom is a groundbreaking improvement.Multi-Mode Asynchronous USB SystemBenchmarks USB system supports USB Audio 2.0 and DSD. It is frequency agile, and will follow sample rate changes initiated by the computer and/or the media playback software. In all modes the USB communications are asynchronous in order to eliminate unnecessary sources of jitter.The DAC3 has a low-jitter master clock which controls the transfer of audio data from the computer to the USB sub-system. The computer asynchronously transfers audio data to a buffer in the DAC3. The contents of the buffer are then asynchronously transferred to the D/A conversion subsystem. This second asynchronous transfer eliminates any traces of jitter that accumulate as the data is transferred between the USB and conversion subsystems. No traces of jitter-induced distortion are measurable to our measurement limits (better than -150 dBFS). This truly represents the state-of-the art. Enjoy the convenience of computer playback without compromise. The Asynchronous USB system supports USB Audio 2.0 for high-resolution 192kHz, and DSD playback. No drivers are required for MAC operating systems. An easy-to-install driver adds 192 kHz and DSD capabilities to Windows operating systems.The USB subsystem remains active when the DAC3 is powered down. This prevents interruptions to the computer playback operations and eliminates the need to reconfigure the computer every time the converter is turned on.Quad 32-bit Balanced Conversion SystemFour balanced 32-bit D/A converters deliver audio to Benchmarks low-impedance current to voltage converters. The 4:1 redundancy reduces noise and distortion to levels that set new benchmarks. The conversion system at the core of the DAC3 is as good as it gets. The analog circuits that follow the D/A converter are carefully designed. Benchmark has leveraged its long history of building high-end analog audio equipment, in order to create an outstanding output stage.The conversion system in the DAC3 achieves a 6 dB signal to noise improvement through the use of 4:1 summing. The ES9028PRO D/A is an 8-channel 32-bit converter. In the DAC3, four channels are summed in the analog domain to form each of the two output channels.The 4:1 summing also improves the THD. The non-linearities in individual conversion channels are averaged across the four summed channels and incoherent non-linearities are attenuated by 6 dB.Diagnostic Tools - Sample-Rate and Word-Length IndicatorsEver wonder why that 192 kHz 24-bit download on your computer just doesnt sound right? Your media player may be down-sampling to 44.1 kHz and/or truncating to 16-bits. Many computers and media players apply poor-quality sample rate conversion and truncation. Fortunately these problems can be eliminated with the selection a good frequency-agile media player. The sample-rate and word-length displays on the DAC3 confirm the proper operation of your media player.Polarity SwitchYou may encounter recordings with inverted polarity. The DAC3 HGC and DAC3 L include a polarity switch to correct the problem.Home Theater BypassThe DAC3 can be integrated into a home theater system. Typically the DAC3 drives the left and right power amplifiers, and an analog feed from the home theater system is connected to either of the analog inputs on the DAC3. A programmable Home Theater Bypass function sets the pass-through gain to unity when the surround system is active. The DAC3 HGC and DAC3 L include an indicator light that is illuminated when bypass is active.Digital Pass ThroughThe second coaxial input on the DAC3 can be reconfigured as a digital output. In output mode, any selected digital input (including USB) will pass through to the coaxial output. The digital pass through is bit-transparent and even supports DSD (DoP 1.1). Dolby digital and DTS formats can also be passed through to a surround processor.Bi-Directional 12 Volt TriggerBenchmark re-invents the 12 volt trigger. The trigger connection on the DAC2 can be used as an input, an output, or both. It is compatible with any common 12 volt trigger input or output. The trigger can be used to turn a power amplifier on or off automatically. The DAC3 will also respond to a 12 volt trigger to follow the actions of another audio component.Power SwitchThe power switch can place the DAC3 in standby, or full shut down. In full shut down, the unit will still respond to the trigger input and the IR remote control. Power consumption is less than 0.5 W in full shut down.Low Power ConsumptionThe DAC3 uses high-efficiency low noise power supplies and may be operated from any standard international voltage without adjustment. Power consumption is 12 W typical.Distributed Power RegulationTo achieve the lowest possible noise, the DAC3 uses distributed power supply regulation. Each critical subsystem has at least one dedicated low-noise voltage regulator.HPA2™ Headphone Power AmplifierThe DAC3 features the HPA2™ - Benchmarks signature high-current, 0-Ohm headphone power amplifier. The HPA2™ is arguably the ultimate reference headphone power amplifier. It will deliver the full rated performance of the DAC3 to the headphones. The DAC3 has two 1/4 headphone jacks on the front panel. The performance of the HPA2™ remains consistent even when two headphones are being driven simultaneously.OverviewA New Reference - Going Beyond the Legendary DAC1 and DAC2The DAC3 is Benchmarks newest 2-channel D/A converter featuring the new ESS Technologies ES9028PRO converter chip. The DAC3 converter has lower THD and THD+N noise than Benchmarks DAC2 converter.Benchmarks DAC1 and DAC2 D/A converter families have been the reference to which other converters have been compared. It is rare to find a converter review that does not draw comparisons to the DAC1 or the DAC2. Benchmark converters are in daily use at many of the worlds finest recording studios and mastering rooms. Benchmark converters are also enjoyed by thousands of audiophiles. Benchmark has raised the bar again ... the DAC3 defines a new reference.Reference PerformanceThe DAC3 delivers outstanding musical detail and precise stereo imaging. It employs an advanced high-headroom digital filter design, and a high-sample-rate Asynchronous USB Audio interface. All inputs are fully isolated from interface jitter by Benchmarks new UltraLock3™ jitter attenuation system.Internal digital processing and conversion is 32-bits, and this processing includes 3.5 dB of headroom above 0 dBFS. This headroom prevents the DSP overloads that commonly occur in other D/A converters.Four balanced 32-bit D/A converters are summed together to create each balanced analog output. This 4:1 summation provides a 6 dB noise reduction, and gives the DAC3 industry-leading performance.DAC3 vs. DAC2The DAC3 builds upon Benchmark’s highly successful DAC2 product family. The DAC3 maintains the familiar DAC2 form factor and feature set, but adds the higher performance available from the new ES9028PRO D/A converter. The DAC3 offers the following improvements over the DAC2:Active 2nd Harmonic CompensationActive 3rd Harmonic CompensationLower THD+NLower passband rippleImproved frequency responseFaster PLL lock timesFaster switching between input signalsDAC3 vs. DAC1The DAC3 and DAC2 added these features that were not found on the DAC1:Asynchronous 192kHz USB Audio 2.032-bit D/A conversion systemWord Length DisplaySample Rate DisplayPolarity ControlDirect DSD D/A Conversion-20 dB DIMBi-Directional 12V TriggerPower Switch with Auto-On FunctionHome Theater BypassDigital Pass-ThroughHigh-Headroom DSPDual-Domain Hybrid Gain ControlAdditional I/ONative DSD ConversionAll digital inputs on the DAC3 support native 192 kHz PCM or DSD64 conversion. From any input, DSD is transported with bit accuracy over DoP 1.1. DSD and PCM are both natively converted to analog. There are no DSD to PCM or PCM to DSD conversions to compromise the quality of the music. The DAC3 conversion system seamlessly switches between native PCM and native DSD conversion. DSD over DoP 1.1 is supported by many media players, and DSD downloads are now available from several sources.Direct Connectivity to Power AmplifiersBenchmark DAC1, DAC2, and DAC3 converters are designed to directly drive power amplifiers and speakers. Benchmark converters feature adjustable low-impedance passive attenuators at the XLR outputs that can be used to optimize the interface to the power amplifier (or powered monitor). This unique Benchmark feature optimizes the gain staging between the DAC and the power amplifier. Proper gain staging cannot be overemphasized. When audio stages are properly matched, each component in the audio chain is able to operate at its optimum signal level, and the system performance is significantly improved.Sonically-Neutral Studio MonitoringAll Benchmark converters are designed for maximum transparency. This transparency is absolutely essential in the studio monitoring chain. For this reason, DAC3 converters are ideal for critical reference-quality professional systems. Unlike many competing products, the DAC3 is not designed to add euphonic coloration to the audio. Instead it is designed to be as uncolored and natural as possible.Step Into the StudioWhen Benchmarks professional converters are used in hi-fi applications, studio-quality sound can be enjoyed in a home environment. Enjoy pure music without any coloration from the electronics. Hear the music exactly the way it was heard in the studio, and exactly the way the artists intended.Discover the natural, uncolored, analog sound of the DAC3.Sit in the Performance SpaceTransparent sound can go beyond replicating the studio experience. Recordings that have been produced with a natural and unprocessed sound can transport you to the performance space. But, this can only happen when the entire playback chain is selected for maximum transparency.This experience of being there cannot be created by systems that are designed to add warmth or euphonic color to the music. TechnologyDAC3 TechnologiesHarmonic CompensationHybrid Gain ControlUltraLock3™ Jitter Attenuation SystemHigh-Headroom DSPMulti-Mode Asynchronous USB Audio SystemQuad 32-bit balanced D/A Conversion SystemDistributed Power RegulationHarmonic CompensationThe ES9028PRO has two distortion compensation systems that independently remove most of the 2nd and 3rd harmonic distortion in the D/A converter. Benchmarks ultra-clean analog output stages allow these systems to be fully leveraged in the DAC3. To the best of our knowledge, no other D/A converter has lower THD than the Benchmark DAC3.Hybrid Gain ControlHGC is Benchmarks unique Hybrid Gain Control system. The DAC3 combines active analog gain control, passive low-impedance attenuators, a 32-bit digital gain control, and a servo-driven volume control. All inputs are controlled by the rotary volume control. This volume control moves in response to commands from the remote control. Analog inputs are never converted to digital, and digital inputs never pass through an analog potentiometer. Digital inputs are precisely controlled in the 32-bit DSP system. The DSP system preserves precise L/R balance, and precise stereo imaging, while avoiding any source of noise and distortion.Benchmarks unique passive output attenuators provide distortion-free gain reduction without reducing the dynamic range of the converter. The attenuators optimize the gain staging between the DAC3 and the power amplifier. This optimization is absolutely essential for maximizing the dynamic range of the entire playback system. Much of the success of the DAC1 and DAC2 converters can be attributed to the passive output attenuators. Musical details can be obscured by system noise whenever a preamplifier and power amplifier are improperly matched. The HGC system will make full use of your power amplifiers dynamic range. Experience new details in your favorite recordings.UltraLock3™ Jitter Attenuation SystemUltraLock3™ is an improved version of the UltraLock2™ system used in the DAC2 product family. UltraLock3™ locks with precise phase accuracy in only 6 ms. In contrast, the UltraLock2™ system required 400 ms. Both UltraLock™ systems provide virtually perfect jitter attenuation, but the lightning-fast lock time of the new UltraLock3™ will be appreciated by many of our users.DSP processing is 32-bits, DSP headroom is 3 dB, sample rate is 211 kHz, and jitter-induced distortion and noise is at least 140 dB below the level of the music - well below the threshold of hearing. Benchmarks UltraLock3™ system eliminates all audible jitter artifacts.High Headroom DSP - with 3.5 dB Excess Digital HeadroomAll of the digital processing in the DAC3 is designed to handle signals as high as +3.5 dBFS. Most digital systems clip signals that exceed 0 dBFS. The 0 dBFS limitation seems reasonable, as 0 dBFS is the highest sinusoidal signal level that can be represented in a digital system. However, a detailed investigation of the mathematics of PCM digital systems will reveal that inter-sample peaks may reach +3.01 dBFS while individual samples never exceed 0 dBFS. These inter-sample peaks are common in commercial releases, and are of no consequence in a PCM system until they reach an interpolation process. But, for a variety of reasons, virtually all audio D/A converters use an interpolation process. The interpolation process is absolutely necessary to achieve 24-bit state-of-the art conversion performance. Unfortunately, inter-sample peaks exceeding 0 dBFS cause clipping in most interpolators. This clipping produces distortion products that are non-harmonic and non-musical . We believe these broadband distortion products often add a harshness or false high-frequency sparkle to digital reproduction. The DAC3 avoids these problems by maintaining at least 3.5 dB of headroom in the entire conversion system. We believe this added headroom is a groundbreaking improvement.Multi-Mode Asynchronous USB SystemBenchmarks USB system supports USB Audio 2.0 and DSD. It is frequency agile, and will follow sample rate changes initiated by the computer and/or the media playback software. In all modes the USB communications are asynchronous in order to eliminate unnecessary sources of jitter.The DAC3 has a low-jitter master clock which controls the transfer of audio data from the computer to the USB sub-system. The computer asynchronously transfers audio data to a buffer in the DAC3. The contents of the buffer are then asynchronously transferred to the D/A conversion subsystem. This second asynchronous transfer eliminates any traces of jitter that accumulate as the data is transferred between the USB and conversion subsystems. No traces of jitter-induced distortion are measurable to our measurement limits (better than -150 dBFS). This truly represents the state-of-the art. Enjoy the convenience of computer playback without compromise. The Asynchronous USB system supports USB Audio 2.0 for high-resolution 192kHz, and DSD playback. No drivers are required for MAC operating systems. An easy-to-install driver adds 192 kHz and DSD capabilities to Windows operating systems.The USB subsystem remains active when the DAC3 is powered down. This prevents interruptions to the computer playback operations and eliminates the need to reconfigure the computer every time the converter is turned on.Quad 32-bit Balanced Conversion SystemFour balanced 32-bit D/A converters deliver audio to Benchmarks low-impedance current to voltage converters. The 4:1 redundancy reduces noise and distortion to levels that set new benchmarks. The conversion system at the core of the DAC3 is as good as it gets. The analog circuits that follow the D/A converter are carefully designed. Benchmark has leveraged its long history of building high-end analog audio equipment, in order to create an outstanding output stage.The conversion system in the DAC3 achieves a 6 dB signal to noise improvement through the use of 4:1 summing. The ES9028PRO D/A is an 8-channel 32-bit converter. In the DAC3, four channels are summed in the analog domain to form each of the two output channels.The 4:1 summing also improves the THD. The non-linearities in individual conversion channels are averaged across the four summed channels and incoherent non-linearities are attenuated by 6 dB.Diagnostic Tools - Sample-Rate and Word-Length IndicatorsEver wonder why that 192 kHz 24-bit download on your computer just doesnt sound right? Your media player may be down-sampling to 44.1 kHz and/or truncating to 16-bits. Many computers and media players apply poor-quality sample rate conversion and truncation. Fortunately these problems can be eliminated with the selection a good frequency-agile media player. The sample-rate and word-length displays on the DAC3 confirm the proper operation of your media player.Polarity SwitchYou may encounter recordings with inverted polarity. The DAC3 HGC and DAC3 L include a polarity switch to correct the problem.Home Theater BypassThe DAC3 can be integrated into a home theater system. Typically the DAC3 drives the left and right power amplifiers, and an analog feed from the home theater system is connected to either of the analog inputs on the DAC3. A programmable Home Theater Bypass function sets the pass-through gain to unity when the surround system is active. The DAC3 HGC and DAC3 L include an indicator light that is illuminated when bypass is active.Digital Pass ThroughThe second coaxial input on the DAC3 can be reconfigured as a digital output. In output mode, any selected digital input (including USB) will pass through to the coaxial output. The digital pass through is bit-transparent and even supports DSD (DoP 1.1). Dolby digital and DTS formats can also be passed through to a surround processor.Bi-Directional 12 Volt TriggerBenchmark re-invents the 12 volt trigger. The trigger connection on the DAC2 can be used as an input, an output, or both. It is compatible with any common 12 volt trigger input or output. The trigger can be used to turn a power amplifier on or off automatically. The DAC3 will also respond to a 12 volt trigger to follow the actions of another audio component.Power SwitchThe power switch can place the DAC3 in standby, or full shut down. In full shut down, the unit will still respond to the trigger input and the IR remote control. Power consumption is less than 0.5 W in full shut down.Low Power ConsumptionThe DAC3 uses high-efficiency low noise power supplies and may be operated from any standard international voltage without adjustment. Power consumption is 12 W typical.Distributed Power RegulationTo achieve the lowest possible noise, the DAC3 uses distributed power supply regulation. Each critical subsystem has at least one dedicated low-noise voltage regulator.HPA2™ Headphone Power AmplifierThe DAC3 features the HPA2™ - Benchmarks signature high-current, 0-Ohm headphone power amplifier. The HPA2™ is arguably the ultimate reference headphone power amplifier. It will deliver the full rated performance of the DAC3 to the headphones. The DAC3 has two 1/4 headphone jacks on the front panel. The performance of the HPA2™ remains consistent even when two headphones are being driven simultaneously. SpecificationsAudio PerformanceFs = 44.1 to 96 kHz, 20 to 20 kHz BW, 1 kHz test tone, 0 dBFS = +24 dBu (unless noted)SNR – A-Weighted, 0 dBFS = +27 dBu128 dBSNR – Unweighted, 0 dBFS = +27 dBu126 dBTHD+N, 1 kHz at 0 dBFS-113 dBFS, -113 dB, 0.00022%THD+N, 1 kHz at -1 dBFS-114 dBFS, -113 dB, 0.00022%THD+N, 1 kHz at –3 dBFS-119 dBFS, -116 dB, 0.00016%THD+N, 20 to 20 kHz test tone at –3 dBFS-113 dBFS, -110 dB, 0.00032%Frequency Response at Fs=192 kHz+0 dB, -0.015 dB (20 to 20 kHz)-0.015 dB at 10 Hz-0.005 dB at 20 kHz-0.031 dB at 40 kHz-0.15 dB at 80 kHzFrequency Response at Fs=48 kHz+0 dB, -0.015 dB (20 to 20 kHz)-0.015 dB at 10 Hz-0.005 dB at 20 kHzCrosstalk-137 dB at 20 Hz-130 dB at 1 kHz-116 dB at 20 kHzMaximum Amplitude of Jitter Induced Sidebands (10 kHz 0 dBFS test tone, 12.75 UI sinusoidal jitter at 1 kHz)< -144 dBMaximum Amplitude of Spurious Tones with 0 dBFS test signal< -138 dBMaximum Amplitude of Idle Tones< -147 dBMaximum Amplitude of AC line related Hum & Noise< -133 dBInter-channel Differential Phase (Stereo Pair – any sample rate)+/- 0.25 degrees at 20 kHzInter-channel Differential Phase (Between DAC3 Units Fs<110 kHz) Any sample rate.+/- 0.25 degrees at 20 kHzMaximum Lock Time after Fs change6 msSoft Mute Ramp Up/Down Time9.6 msMute on Receive ErrorYesMute on Lock ErrorYesMute on Idle ChannelNo50/15 us De-Emphasis EnableAutomatic in Consumer ModeDe-Emphasis MethodDigital IIRDe-Emphasis Supported atFs = 32, 44.1, 48 kHzGroup Delay (Latency)Delay – Digital Input to Analog Output (function of sample rate) 1.36 ms at 44.1 kHz1.27 ms at 48 kHz0.90 ms at 88.2 kHz0.82 ms at 96 kHz0.51 ms at 176.4 kHz0.47 ms at 192 kHzDigital Audio InputsNumber of Digital Inputs (switch selected)5 (1 USB, 2 Optical, 2 Coaxial)Number of Channels2Input Sample Frequency Range28 to 210 kHz (Coaxial Inputs)28 to 96 kHz (Optical Inputs)44.1, 48, 88.2, 96, 176.4, 192 kHz (USB Input)Maximum Input Word Length24 bits Digital Input Impedance75 Ohms (Coaxial Inputs)DC Blocking Capacitors on Digital InputsYes (Coaxial Inputs)Transient and Over-Voltage Protection on Digital InputsYes (Coaxial Inputs)Minimum Digital Input Level250 mVpp (Coaxial Inputs)Jitter Tolerance(With no Measurable Change in Performance) >12.75 UI sine, 100 Hz to 3 kHz>1.5 UI sine at 20 kHz>1.5 UI sine at 40 kHz>1.5 UI sine at 80 kHz>1.5 UI sine at 90 kHz>0.25 UI sine above 160 kHzJitter Attenuation MethodBenchmark UltraLock3™ - all inputsBalanced Analog OutputsNumber of Balanced Analog Outputs2Output ConnectorGold-Pin Neutrik™ male XLROutput Impedance60 Ohms (Attenuator off)425 Ohms (Attenuator = 10 dB)135 Ohms (Attenuator = 20 dB)Analog Output Clip Point+30 dBuFactory Set Bypass Level (at 0 dBFS)+24 dBu (Attenuator = 0 dB)Output Level Range (at 0 dBFS) In ‘Variable’ ModeOff to +27.5 dBu (Attenuator off)Off to +17.5 dBu (Attenuator = 10 dB)Off to +7.5 dBu (Attenuator = 20 dB)Output Level Variation with Sample Rate (44.1 kHz vs. 96 kHz)< +/- 0.006 dBUnbalanced Analog OutputsNumber of Unbalanced Analog Outputs4Output ConnectorRCAOutput Impedance30 OhmsAnalog Output Clip Point+13.5 dBu (3.7 Vrms)Factory Set Home Theater Bypass Output Level (at 0 dBFS)+8.2 dBu (2 Vrms)Output Level Range (with 0 dBFS digital input)Off to +11.7 dBu (3 Vrms)Output Level Variation with Sample Rate< +/- 0.006 dBHPA2TM Headphone OutputsNumber of Headphone Outputs2Output Connectors¼” TRS with switch on left-hand jackOutput Impedance< 0.11 OhmsOutput Level ControlStereo Control on Front PanelOutput Level Range (at 0 dBFS) into 60-Ohm LoadOff to +21.5 dBu (9.2 Vrms)Output Power1.25 W into 30 OhmsMaximum Output Current250 mAOverload Protection (independent per channel)Current limited at 300 mA, ThermalBandwidth> 500 kHz, -0.35 dB at 200 kHzTHD+N at 20 mW-108 dB (0.0004%) into 300 Ohms, -100 dB (0.0010%) into 30 OhmsStatus DisplayIndicators - Type and Location16 LED’s on Front PanelSelection/Status Indication1 – Dim/Mute1 - Polarity6 – Input2 – Bypass/Calibrated Output2 – Word length4 – Sample RateAC Power RequirementsNominal Input Operating Voltage Range (VAC RMS)100 – 240VFrequency50-60 HzPower< 0.5 Watts Idle12 Watts Typical Program15 Watts MaximumFuses5 x 20 mm (2 required)0.5 A 250 V Slo-Blo® TypeMin/Max Operating range (VAC RMS)90 – 260 VAC47 – 63 HzDimensionsForm Factor½ Rack Wide, 1 RU HighDepth behind front panel8.5” (216 mm)Overall depth including connectors but without power cord9.33” (237 mm)Width9.5” (249 mm)Height1.725” (44.5 mm)WeightDAC3 only3 lb.DAC3 with remote control, power cord, extra fuses, and manual4 lb.Shipping weight7 lb.Important FeaturesSample Rate DisplayWord Length Display5 Digital Inputs2 Stereo Analog Inputs (2 RCA)3 Stereo Analog Outputs (2 RCA, 1 XLR)Digital Pass ThroughNative DSD ConversionPolarity SwitchAsynchronous USB 2.0Home Theater BypassBi-Directional 12 Volt TriggerPower SwitchLow Power ConsumptionES9028PRO Converter

Das Benchmark Media DAC3 HGC ist ein Diegital-Ananlog-Wandler, ein Vorverstärker und ein hochklassiger Kopfhöhrerverstärker auf Studioniveau. Das referenz 2 Kanal DAC basiert auf dem ESS Technologies ES9028PRO converter chip.Verkauf mit Originalverpackung, Handbuch, USB Kabel, Netzkabel (Internatiomal), alternatives Netzkabel für Betrieb an deutschen Stromnetz, Toslink Digital Kabel, 12v Trigger, Fernbedienung Gerät funktioniert sowohl mit 110 als auch mit 220V. Sample Rate Display Word Length Display5 Digital Inputs2 Stereo Analog Inputs (2 RCA)3 Stereo Analog Outputs (2 RCA, 1 XLR)Digital Pass ThroughNative DSD ConversionPolarity SwitchAsynchronous USB 2.0Home Theater BypassBi-Directional 12 Volt TriggerPower SwitchLow Power ConsumptionES9028PRO Converter Keine Rücknahme oder Gewährleistung da Privatverkauf.

Das Benchmark Media DAC3 HGC ist ein Diegital-Ananlog-Wandler, ein Vorverstärker und ein hochklassiger Kopfhöhrerverstärker auf Studioniveau. Das referenz 2 Kanal DAC basiert auf dem ESS Technologies ES9028PRO converter chip.Verkauf mit Originalverpackung, Handbuch, USB Kabel, Netzkabel (Internatiomal), alternatives Netzkabel für Betrieb an deutschen Stromnetz, Toslink Digital Kabel, 12v Trigger, Fernbedienung Gerät funktioniert sowohl mit 110 als auch mit 220V. Sample Rate Display Word Length Display5 Digital Inputs2 Stereo Analog Inputs (2 RCA)3 Stereo Analog Outputs (2 RCA, 1 XLR)Digital Pass ThroughNative DSD ConversionPolarity SwitchAsynchronous USB 2.0Home Theater BypassBi-Directional 12 Volt TriggerPower SwitchLow Power ConsumptionES9028PRO Converter Keine Rücknahme oder Gewährleistung da Privatverkauf.

Ask a Question About Us Our Feedback Benchmark DAC3 HGC Converter in Black The DAC3 HGC delivers outstanding musical detail and precise stereo imaging. It employs an advanced high-headroom digital filter design, and a high-sample-rate Asynchronous USB Audio interface. All inputs are fully isolated from interface jitter by Benchmarks new UltraLock3™ jitter attenuation system. Internal digital processing and conversion is 32-bits, and this processing includes 3.5 dB of headroom above 0 dBFS. This headroom prevents the DSP overloads that commonly occur in other D/A converters. SSP £2449 inc vat inventory In stock ready for dispatch update Order by 3pm for next-day UK delivery More to Explore Audio Interfaces Cables Headphones Microphone Preamps Microphones Studio Monitors Studio Signal Processing Other HiFi Other Pro Audio auto_awesome 100% Positive Feedback local_shipping Free UK Delivery verified_user Warranty Included

Benchmark Media DAC3 HGC Referenz Stereo DAC + Vorverstärker (auch analoge Eingänge) + KopfhörerverstärkerModell Herbst/Winter 2024 UVP: Euro 2890,-- Zum Verkauf kommt ein nagelneuer Benchmark Media DAC3 HGC Referenz Stereo DAC + Vorverstärker + Kopfhörerverstärker des amerikanischen Spezialisten.Wird nach Kauf geordert, will be ordered after purchase.Bitte Lieferzeit einplanen. Some waiting time.Einmalige Chance!Näheres finden Sie auf der Webseite des Herstellers!Benchmark Media DAC3 HGCDer DAC 3 ist ein kleines Gerät, das vollständig die Funktionen eines Vorverstärkers (auch mit analogen Eingängen), Digital-Analog-Wandlers und Kopfhörerverstärker vereint - in Studioqualität.Zusammen mit dem passenden Endverstärker AHB2 hat man schon eine in Abmessungen kleine Highend-Anlage. Ausführung in Silber oder Schwarz. Es ist zusätzlich eine schwarze Fernbedienung (Remote) erhältlich. Technik des Benchmark DAC3Verringerung harmonische VerzerrungenHybride LautstärkeregelungUltraLock3™ Jitter VerringerungHigh-Headroom DSPMulti-Mode Asynchronous USB Audio SystemQuad 32-bit Symmetrischer D/A WandlerVerteilte Netzteil-RegelungenVerringerung harmonischer VerzerrungenDer verwendete ES9028PRO hat zwei unabhängige Systeme zur Verringerung harmonischer Verzerrungen, die fast vollständig die Verzerrungen der zweiten und dritten Oberwelle erreichen. Der Benchmark hat zudem ultra-saubere analoge Ausgangsstufen. Nach aktuellem Stand gibt es keinen anderen DAC mit niedrigeren THD Verzerrungen als der DAC3.HGC = Hybrid Gain ControlHGC ist Benchmarks einzigartiges Hybrid Gain Control system. Der DAC3 kombiniert eine aktive Verstärkungsregelung, ein passives Widerstandsnetzwerk, eine 32-bit digitale Verstärkungsregelung und eine fernbedienbare motorbetriebene Lautstärkeregelung. Die analogen Eingänge werden nicht digitalisiert und digitale Eigänge gehen nicht über eine analoge Lautstärkeregelung Digitaleingänge werden über ein 32 Bit DSP System gesteuert. Das DSP gewährleistet präzise L/R Balance, und eine präzise Stereo Abbildung,Das passive Widerstandsnetzwerk erlaubt verzerrungsfreie Verstärkungsregelung ohne die Dynamik zu begrenzenr. Widerstände optimieren die Verstärkungsfaktoren der Stufen zwischen dem DAC3 und dem Endverstärker. Diese Optimierung ist entscheidend für die erreichbare Gesamtqualität der Kette.UltraLock3™ Jitter Attenuation SystemUltraLock3™ erreicht die Phasengenauigkeit innerhalb von nur 6 ms. DSP Verarbeitung mit 32 bit, ein DSP Headroom von 3,5 dB, Eine sample rate von 211 kHz, und Jitter-bedingte Verzerrungen 140 dB unterhalb des Musiksignals - einfach nicht hörbar.High Headroom DSP - mit 3.5 dB Zusatz Digital HeadroomDie digitale Signalverarbeitung erlaubt eine Verarbeitung der Signale bis +3.5 dBFS. Die meisten Digitalprozessoren clippen Signale oberhalb von 0 dBFS. Die 0 dBFS Grenze scheimt hinreichend, da 0 dBFS das höchste Sinussignallevel im Signalprozessor ist .Eine genaue Untersuchung hat ergeben, dass in PCM-Systemen inter-sample peaks Werte von leicht über +3 dBFS erreichen können, auch wenn die einzelnen Abtastwerte niemals 0 dBFS überschreiten.Diese inter-sample overs sind allgemein häufig auf kommerziellen Aufnahmen zu finden, sind aber erst dann von Bedeutung, wenn ein Interpolationsprozess beginnt. Aber fast alle DACs nutzen aus verschiedensten Gründen Interpolationsprozesse.Inter-sample overs führen in den meisten Wandlern zum clipping. Das clipping erzeugt disharmonische, unmusikalische Verzerrungskomponenten. Benchmark gibt an , dass diese Verzerrungen eine harsche Wiedergabe oder unnatürlichen Hochtöne erzeugen. Durch den zusätzlichen 3,5 dB headroom werden diese Verzerrungen vermieden. Benchmark sieht darin einen großen klanglichen Fortschritt.Multi-Mode Asynchronous USB SystemBenchmarks USB system unterstützt USB Audio 2.0, DSD, and USB Audio 1.1. Der DAC3 hat eine Master Clock mit geringem Jitter. Der Computer tranferiert Daten im asynchronen Modus zum Buffer des DAC. Der Inhalt des Buffer wird dann widerum asynchron zum D/A System übertragen. diese zweite asynchrone Übertragung eliminiert alle Spuren von Jitter Keine Spuren von Jitterbedingten Verzerrungen sind mit der aktuellen Messtechnik messbar (besser als -150 dBFS). Das ist State of the Art.Keine Treiber sind für MAC OS erforderlich, lediglich für 192 kHz and DSD muss ein Windows Treiber installiert werden. USB Audio 1.1 mode unterstützt Bitraten bis 96 kHz. Dieser USB mode kann gewählt werden, damit ist ein plug and play mit allen Betriebssystemen möglich.Quad 32-bit Symmetrisches Conversion SystemVier symmetrische 32-bit D/AWandler ergeben eine Wandlung von Strom zu Spannung mit niedriger Impedanz. Die 4:1 Redundanz verringert auch das Rauschen und die Verzerrungen. Durch die 4:1 Addition erreicht der DAC3 eine Verbesserung um 6 dB von Signal-Rausch-Abstand und THD.Phasen - SchalterAufnahmen mit verkehrter Phase können invertiert geschaltet werden.Home Theater BypassDer DAC3 kann in ein Heimkino integriert werden, dafür hatt er eine Durchschleif-FunktionDigital Pass ThroughDer zweite Coax-Eingang kann auch als digitaler Ausgang konfiguriert werden.Bi-Directional 12 Volt TriggerDer Trigger-Anschluß kann zum automatischen Ein/Aus von Geräten genutzt werden.NetzschalterDer Netzschalter schaltet in Standby oder Total-Aus. Auch im Total-Aus reagiert er noch auf Trigger oder Fernbedienung, der Stromverbrauch ist dann niedriger als 0,5 WNiedriger StromverbrauchDer DAC3 verbraucht im Betrieb nur 12 W .HPA2™ Kopfhörerverstärker auf ReferenzniveauDer DAC 3 hat zwei Kopfhöreranschlüsse und einen Verstärker mit hoher Stromlieferfähigkeit und 0-Ohm Impedanz. Technische Daten (von der Benchmark Website)Group Delay (Latency)Delay – Digital Input to Analog Output (function of sample rate) 1.36 ms at 44.1 kHz1.27 ms at 48 kHz0.90 ms at 88.2 kHz0.82 ms at 96 kHz0.51 ms at 176.4 kHz0.47 ms at 192 kHz Digital Audio InputsNumber of Digital Inputs (switch selected)5 (1 USB, 2 Optical, 2 Coaxial)Number of Channels2Input Sample Frequency Range28 to 210 kHz (Coaxial Inputs)28 to 96 kHz (Optical Inputs)44.1, 48, 88.2, 96, 176.4, 192 kHz (USB Input)Maximum Input Word Length24 bitsDigital Input Impedance75 Ohms (Coaxial Inputs)DC Blocking Capacitors on Digital InputsYes (Coaxial Inputs)Transient and Over-Voltage Protection on Digital InputsYes (Coaxial Inputs)Minimum Digital Input Level250 mVpp (Coaxial Inputs)Jitter Tolerance(With no Measurable Change in Performance) >12.75 UI sine, 100 Hz to 3 kHz>1.5 UI sine at 20 kHz>1.5 UI sine at 40 kHz>1.5 UI sine at 80 kHz>1.5 UI sine at 90 kHz>0.25 UI sine above 160 kHzJitter Attenuation MethodBenchmark UltraLock3™ - all inputs Balanced Analog OutputsNumber of Balanced Analog Outputs2Output ConnectorGold-Pin Neutrik™ male XLROutput Impedance60 Ohms (Attenuator off)425 Ohms (Attenuator = 10 dB)135 Ohms (Attenuator = 20 dB)Analog Output Clip Point+30 dBuFactory Set Bypass Level (at 0 dBFS)+24 dBu (Attenuator = 0 dB)Output Level Range (at 0 dBFS) In ‘Variable’ ModeOff to +27.5 dBu (Attenuator off)Off to +17.5 dBu (Attenuator = 10 dB)Off to +7.5 dBu (Attenuator = 20 dB)Output Level Variation with Sample Rate (44.1 kHz vs. 96 kHz)< +/- 0.006 dBAudio PerformanceFs = 44.1 to 96 kHz, 20 to 20 kHz BW, 1 kHz test tone, 0 dBFS = +24 dBu (unless noted)SNR – A-Weighted, 0 dBFS = +27 dBu128 dBSNR – Unweighted, 0 dBFS = +27 dBu126 dBTHD+N, 1 kHz at 0 dBFS-113 dBFS, -113 dB, 0.00022%THD+N, 1 kHz at -1 dBFS-114 dBFS, -113 dB, 0.00022%THD+N, 1 kHz at –3 dBFS-119 dBFS, -116 dB, 0.00016%THD+N, 20 to 20 kHz test tone at –3 dBFS-113 dBFS, -110 dB, 0.00032%Frequency Response at Fs=192 kHz+0 dB, -0.015 dB (20 to 20 kHz)-0.015 dB at 10 Hz-0.005 dB at 20 kHz-0.031 dB at 40 kHz-0.15 dB at 80 kHzFrequency Response at Fs=48 kHz+0 dB, -0.015 dB (20 to 20 kHz)-0.015 dB at 10 Hz-0.005 dB at 20 kHzCrosstalk-116 dB at 20 kHz-130 dB at 1 kHz-137 dB at 20 HzMaximum Amplitude of Jitter Induced Sidebands (10 kHz 0 dBFS test tone, 12.75 UI sinusoidal jitter at 1 kHz)< -144 dBMaximum Amplitude of Spurious Tones with 0 dBFS test signal< -138 dBMaximum Amplitude of Idle Tones< -147 dBMaximum Amplitude of AC line related Hum & Noise< -133 dBInter-channel Differential Phase (Stereo Pair – any sample rate)+/- 0.25 degrees at 20 kHzInter-channel Differential Phase (Between DAC3 Units Fs<110 kHz) Any sample rate.+/- 0.25 degrees at 20 kHzMaximum Lock Time after Fs change6 msSoft Mute Ramp Up/Down Time9.6 msMute on Receive ErrorYesMute on Lock ErrorYesMute on Idle ChannelNo50/15 us De-Emphasis EnableAutomatic in Consumer ModeDe-Emphasis MethodDigital IIRDe-Emphasis Supported atFs = 32, 44.1, 48 kHz

Used, in perfect condition. Warranty until 18.04.2025.Was purchased from our store in April 2023

Der DAC3 B ist ein Referenz Digital-Analog-Wander der Absoluten Spitzenklasse. Zahlreiche Tests belegen die Überlegenheit der Produkte, zuletzt in diesem Sommer in der Zeitschrift FIdelity. Die Geräte sind quasi neu und technisch/klanglich den aktuellen 2024 Geräten identisch. Die Geräte waren Vorführgeräte - sie erhalten daher bei Kauf die 2-jährige Neugeräte-Garantie von Benchmark Media Deutschland.Alle Geräte sind mit Original Zubehör (USB- und Triggerkabel, Anleitung, Ersatz-Sicherungen) inkl. EU Netzkabel und Original Verpackung Neupreis im Benchmark Shop ist 2.390 Euroerhältlich in schwarz oder silber Versand per DHL in 3-5 Tagen

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies Benchmark DAC3 B D/A Converter Product SKU: 56841 Voltage: 100-240V # of Owners: 1 Service History: None Serial Number: 20536911 Age: Unknown Tobacco Exposure: No MSRP: $1899 Cosmetic Description: Excellent condition with no notable blemishes.  What is Included: DAC, Manual, Power cable, Factory packaging Other Notes: The DAC3 B is the basic D/A converter in Benchmarks DAC3 converter series. The DAC3 B is the ideal converter to use in front of Benchmarks HPA4 headphone amplifier or LA4 line amplifier. It is also ideal for many professional studio applications. It delivers the full performance of the flagship DAC3 HGC, but eliminates the volume control, the analog inputs, the mute and polarity controls, and the headphone amplifier. -Benchmark Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Cost to ship this item within the contiguous United States is a flat rate of $37- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.

IT IS FULLY FUNCTIONAL AND IN PERFECT CONDITION AS PHOTOS SHOWN ! ( RETAIL NEW:$1,899)OVERVIEW:Native DSD and PCM Conversion, Studio-Quality Naturalism, and Trademarked Jitter Reduction Equate to Stellar Sound: U.S.A.-Built Benchmark DAC 3 B Also Features Harmonic CompensationWant a reference DAC stripped to the core to keep costs manageable? Meet the Benchmark DAC3 B, which sounds exactly like its more expensive sibling, DAC3 HDC. How? It uses the very same circuit board and audio path, and simply eliminates a few extra features – the headphone amplifier, volume control, and analog inputs – to focus on the task at hand. Bolstered by an ESS Technologies ES9028PRO chip, trademarked jitter attenuation system, and active second and third harmonic compensation, DAC3 B offers native PCM and DSD conversion to analog. Youll experience finite details, spot-on precision, impeccable timing, and absorbing immediacy. Benchmark, indeed.To make system integration easy, the American-designed and -built DAC3 B retains IR remote control (handset optional), 12 V trigger, and a programmable auto-on feature. It also adds a control-lock feature that turns off the remote control and locks the keypad to prevent tampering and accidental changes. The optional 1/2-width rack-mount faceplate allows the mounting of two units in a single 1-RU rack space. Benchmarks extended five-year warranty and our 100% Satisfaction Guarantee do the rest.Sonically Neutral Studio-Quality MonitoringAll Benchmark converters are designed for maximum transparency. This transparency is absolutely essential in the studio monitoring chain. For this reason, DAC3 converters are ideal for critical reference-quality professional systems. Unlike many competing products, DAC3 is not designed to add euphonic coloration to the audio. Instead it is created to be as uncolored and natural as possible.Virtually Perfect Jitter Reduction With Trademarked UltraLock3 SystemThe lightning-fast UltraLock3 is an improved version of the UltraLock2 system and provides virtually perfect jitter attenuation. DSP processing is 32-bits, DSP headroom is 3.5dB, sample rate is 211 kHz, and jitter-induced distortion and noise is at least 140dB below the level of the music - well below the threshold of hearing. Benchmarks UltraLock3 system eliminates all audible jitter artifacts.High Headroom Features 3.5dB Excess for Coloration-Free PlaybackAll of the digital processing in DAC3 is designed to handle signals as high as +3.5 dBFS. Most digital systems clip signals that exceed 0 dBFS. The 0 dBFS limitation seems reasonable, as 0 dBFS is the highest sinusoidal signal level that can be represented in a digital system. However, a detailed investigation of the mathematics of PCM digital systems will reveal that inter-sample peaks may reach levels slightly higher than +3 dBFS while individual samples never exceed 0 dBFS. These inter-sample overs are common in commercial releases, and are of no consequence in a PCM system until they reach an interpolation process. But virtually all audio D/A converters use an interpolation process. The interpolation process is absolutely necessary to achieve 24-bit state-of-the art conversion performance. Unfortunately, inter-sample overs cause clipping in most interpolators. This clipping produces distortion products that are non-harmonic and non-musical . We believe these broadband distortion products often add a harshness or false high-frequency sparkle to digital reproduction. DAC3 avoids these problems by maintaining at least 3.5dB of headroom in the entire conversion system.Multi-Mode Asynchronous USB System Supports USB2.0 and DSDBenchmarks USB system supports USB Audio 2.0, DSD, and USB Audio 1.1. It will follow sample-rate changes initiated by the computer and/or the media playback software. In all modes, the USB communications are asynchronous in order to eliminate unnecessary sources of jitter. DAC3 has a low-jitter master clock that controls the transfer of audio data from the computer to the USB sub-system. The computer asynchronously transfers audio data to a buffer in DAC3. The contents of the buffer are then asynchronously transferred to the D/A conversion subsystem. This second asynchronous transfer eliminates any traces of jitter that accumulate as the data is transferred between the USB and conversion subsystems. No traces of jitter-induced distortion are measurable to Benchmarks measurement limits (better than -150 dBFS). So you can enjoy the convenience of computer playback without compromise. The asynchronous USB system supports USB Audio 2.0 for high-resolution 192kHz and DSD playback. An asynchronous, driverless USB Audio 1.1 mode supports sample rates up to 96kHz. This USB mode can be selected from the front panel or from the remote control. The USB subsystem remains active when DAC3 is powered down to prevents interruptions to the computer playback operations and eliminate the need to reconfigure the computer every time the converter is turned on.Incredibly Low THD Via Quad 32-Bit Balanced ConversionFour balanced 32-bit D/A converters deliver audio to Benchmarks low-impedance current to voltage converters. The 4:1 redundancy reduces noise and distortion to beguiling levels. The conversion system at the core of DAC3 is superb and the analog circuits that follow the D/A converter carefully designed. The conversion system in DAC3 achieves a 6dB signal-to-noise improvement through the use of 4:1 summing. The ES9028PRO D/A is an 8-channel 32-bit converter. In DAC3, four channels are summed in the analog domain to form each of the two output channels. he 4:1 summing also improves the THD. The non-linearities in individual conversion channels are averaged across the four summed channels and incoherent non-linearities are attenuated by 6dB.Two Harmonic Compensation SystemsThe ES9028PRO chip has two distortion compensation systems that independently remove most of the 2nd and 3rd harmonic distortion in the D/A converter. Benchmarks ultra-clean analog output stages allow these systems to be fully leveraged in DAC3. To Benchmarks knowledge, no other D/A converter has lower THD.Native DSD ConversionAll digital inputs on the DAC3 support native PCM or DSD conversion. From any input, DSD is transported with bit accuracy over DoP 1.1. DSD and PCM are both natively converted to analog. There are no DSD to PCM or PCM to DSD conversions to compromise the quality of the music. The DAC3 conversion system seamlessly switches between native PCM and native DSD conversion.Direct Connectivity to Power AmplifiersDAC3 converters are designed to directly drive power amplifiers and speakers. Benchmark converters feature adjustable low-impedance passive attenuators at the XLR outputs that can be used to optimize the interface to the power amplifier (or powered monitor). This unique Benchmark feature optimizes the gain staging between the DAC and the power amplifier. When audio stages are properly matched, each component in the audio chain is able to operate at its optimum signal level, and system performance is significantly improved.Sample-Rate and Word-Length IndicatorsEver wonder why that 192 kHz 24-bit download on your computer just doesnt sound right? Your media player may be down-sampling to 44.1 kHz and/or truncating to 16-bits. Many computers and media players apply poor-quality sample rate conversion and truncation. Fortunately these problems can be eliminated with the selection a good frequency-agile media player. The sample-rate and word-length displays on the DAC3 confirm the proper operation of your media player.

DAC3 B - Reference Quality - Basic Features The DAC3 B is the basic D/A converter in Benchmark's DAC3 converter series. The DAC3 B is the ideal converter to use in front of Benchmark's HPA4 headphone amplifier or LA4 line amplifier. It is also ideal for many professional studio applications. It delivers the full performance of the flagship DAC3 HGC, but eliminates the volume control, the analog inputs, the mute and polarity controls, and the headphone amplifier. To make system integration easy, the DAC3 B retains IR remote control (handset optional), 12 V trigger, and the programmable auto-on feature. The DAC3 B adds a control-lock feature that turns off the remote control and locks the keypad to prevent tampering and accidental changes. The optional 1/2-width rack-mount faceplate allows the mounting of two units in a single 1-RU rack space. The DAC3 B sounds exactly like the DAC3 HGC because it uses the exact same circuit board and the exact same audio path. Benchmark has simply eliminated the unnecessary parts to deliver a stripped down race car of a converter. If you want a basic D/A converter that delivers the finest conversion available, the DAC3 B is for you. The DAC3 B is a 2-channel D/A converter featuring the new ESS Technologies ES9028PRO converter chip. The DAC3 converter has lower THD and THD+N noise than Benchmark's DAC2 converters. Benchmark's DAC1 and DAC2 D/A converter families have been the reference to which other converters have been compared. It is rare to find a converter review that does not draw comparisons to the DAC1 or the DAC2. Benchmark converters are in daily use at many of the world's finest recording studios and mastering rooms. Benchmark converters are also enjoyed by thousands of audiophiles. Benchmark has raised the bar again ... the DAC3 defines a new reference. Reference Performance The DAC3 delivers outstanding musical detail and precise stereo imaging. It employs an advanced high-headroom digital filter design, and a high-sample-rate Asynchronous USB Audio interface. All inputs are fully isolated from interface jitter by Benchmark's new UltraLock3™ jitter attenuation system. Internal digital processing and conversion is 32-bits, and this processing includes 3.5 dB of headroom above 0 dBFS. This headroom prevents the DSP overloads that commonly occur in other D/A converters. Four balanced 32-bit D/A converters are summed together to create each balanced analog output. This 4:1 summation provides a 6 dB noise reduction, and gives the DAC3 industry-leading performance. DAC3 vs. DAC2 The DAC3 builds upon Benchmark’s highly successful DAC2 product family. The DAC3 maintains the familiar DAC2 form factor and feature set, but adds the higher performance available from the new ES9028PRO D/A converter. The DAC3 offers the following improvements over the DAC2: Active 2nd Harmonic Compensation Active 3rd Harmonic Compensation Lower THD+N Lower passband ripple Improved frequency response Faster PLL lock times Faster switching between input signals DAC3 vs. DAC1 The DAC3 and DAC2 added these features that were not found on the DAC1: Asynchronous 192kHz USB Audio 2.0 32-bit D/A conversion system Word Length Display Sample Rate Display Direct DSD D/A Conversion Bi-Directional 12V Trigger Power Switch with Auto-On Function Digital Pass-Through High-Headroom DSP Additional I/O Native DSD Conversion All digital inputs on the DAC3 support native 192 kHz PCM or DSD64 conversion. From any input, DSD is transported with bit accuracy over DoP 1.1. DSD and PCM are both natively converted to analog. There are no DSD to PCM or PCM to DSD conversions to compromise the quality of the music. The DAC3 conversion system seamlessly switches between native PCM and native DSD conversion. DSD over DoP 1.1 is supported by many media players, and DSD downloads are now available from several sources. Sonically-Neutral Studio Monitoring All Benchmark converters are designed for maximum transparency. This transparency is absolutely essential in the studio monitoring chain. For this reason, DAC3 converters are ideal for critical reference-quality professional systems. Unlike many competing products, the DAC3 is not designed to add euphonic coloration to the audio. Instead it is designed to be as uncolored and natural as possible. Step Into the Studio When Benchmark's professional converters are used in hi-fi applications, studio-quality sound can be enjoyed in a home environment. Enjoy pure music without any coloration from the electronics. Hear the music exactly the way it was heard in the studio, and exactly the way the artists intended. Discover the natural, uncolored, analog sound of the DAC3. Sit in the Performance Space Transparent sound can go beyond replicating the studio experience. Recordings that have been produced with a natural and unprocessed sound can transport you to the performance space. But, this can only happen when the entire playback chain is selected for maximum transparency. This experience of being there cannot be created by systems that are designed to add warmth or euphonic color to the music. Retails for 1900.00$ on benchmarks website. This unit is like new condition. Has been tested and works great! Much more about this unit can be found on benchmarks website. I will also be including a good quality usb cable with the unit.

Benchmark DAC3 is made in USA and An audiophile DAC.(retail new: $1,899) Please check the link for reviews: https://benchmarkmedia.com/collections/a-stock/products/benchmark-dac3-b-digital-to-analog-audio-converterDAC3 Technologies Harmonic CompensationUltraLock3™ Jitter Attenuation SystemHigh-Headroom DSPMulti-Mode Asynchronous USB Audio SystemQuad 32-bit balanced D/A Conversion SystemDistributed Power RegulationHarmonic CompensationThe ES9028PRO has two distortion compensation systems that independently remove most of the 2nd and 3rd harmonic distortion in the D/A converter. Benchmarks ultra-clean analog output stages allow these systems to be fully leveraged in the DAC3. To the best of our knowledge, no other D/A converter has lower THD than the Benchmark DAC3.UltraLock3™ Jitter Attenuation SystemUltraLock3™ is an improved version of the UltraLock2™ system used in the DAC2 product family. UltraLock3™ locks with precise phase accuracy in only 6 ms. In contrast, the UltraLock2™ system required 400 ms. Both UltraLock™ systems provide virtually perfect jitter attenuation, but the lightning-fast lock time of the new UltraLock3™ will be appreciated by many of our users.DSP processing is 32-bits, DSP headroom is 3.5 dB, sample rate is 211 kHz, and jitter-induced distortion and noise is at least 140 dB below the level of the music - well below the threshold of hearing. Benchmarks UltraLock3™ system eliminates all audible jitter artifacts.High Headroom DSP - with 3.5 dB Excess Digital HeadroomAll of the digital processing in the DAC3 is designed to handle signals as high as +3.5 dBFS. Most digital systems clip signals that exceed 0 dBFS. The 0 dBFS limitation seems reasonable, as 0 dBFS is the highest sinusoidal signal level that can be represented in a digital system. However, a detailed investigation of the mathematics of PCM digital systems will reveal that inter-sample peaks may reach levels slightly higher than +3 dBFS while individual samples never exceed 0 dBFS. These inter-sample overs are common in commercial releases, and are of no consequence in a PCM system until they reach an interpolation process. But, for a variety of reasons, virtually all audio D/A converters use an interpolation process. The interpolation process is absolutely necessary to achieve 24-bit state-of-the art conversion performance. Unfortunately, inter-sample overs cause clipping in most interpolators. This clipping produces distortion products that are non-harmonic and non-musical . We believe these broadband distortion products often add a harshness or false high-frequency sparkle to digital reproduction. The DAC3 avoids these problems by maintaining at least 3.5 dB of headroom in the entire conversion system. We believe this added headroom is a groundbreaking improvement.Multi-Mode Asynchronous USB SystemBenchmarks USB system supports USB Audio 2.0 and DSD. It is frequency agile, and will follow sample rate changes initiated by the computer and/or the media playback software. In all modes the USB communications are asynchronous in order to eliminate unnecessary sources of jitter.The DAC3 has a low-jitter master clock which controls the transfer of audio data from the computer to the USB sub-system. The computer asynchronously transfers audio data to a buffer in the DAC3. The contents of the buffer are then asynchronously transferred to the D/A conversion subsystem. This second asynchronous transfer eliminates any traces of jitter that accumulate as the data is transferred between the USB and conversion subsystems. No traces of jitter-induced distortion are measurable to our measurement limits (better than -150 dBFS). This truly represents the state-of-the art. Enjoy the convenience of computer playback without compromise. The Asynchronous USB system supports USB Audio 2.0 for high-resolution 192kHz, and DSD playback. No drivers are required for MAC operating systems. An easy-to-install driver adds 192 kHz and DSD capabilities to Windows operating systems.The USB subsystem remains active when the DAC3 is powered down. This prevents interruptions to the computer playback operations and eliminates the need to reconfigure the computer every time the converter is turned on.Quad 32-bit Balanced Conversion SystemFour balanced 32-bit D/A converters deliver audio to Benchmarks low-impedance current to voltage converters. The 4:1 redundancy reduces noise and distortion to levels that set new benchmarks. The conversion system at the core of the DAC3 is as good as it gets. The analog circuits that follow the D/A converter are carefully designed. Benchmark has leveraged its long history of building high-end analog audio equipment, in order to create an outstanding output stage.The conversion system in the DAC3 achieves a 6 dB signal to noise improvement through the use of 4:1 summing. The ES9028PRO D/A is an 8-channel 32-bit converter. In the DAC3, four channels are summed in the analog domain to form each of the two output channels.The 4:1 summing also improves the THD. The non-linearities in individual conversion channels are averaged across the four summed channels and incoherent non-linearities are attenuated by 6 dB.Diagnostic Tools - Sample-Rate and Word-Length IndicatorsEver wonder why that 192 kHz 24-bit download on your computer just doesnt sound right? Your media player may be down-sampling to 44.1 kHz and/or truncating to 16-bits. Many computers and media players apply poor-quality sample rate conversion and truncation. Fortunately these problems can be eliminated with the selection a good frequency-agile media player. The sample-rate and word-length displays on the DAC3 confirm the proper operation of your media player.Control LockThe DAC3 B can be locked to avoid accidental changes that could cause a loss of audio in dedicated applications. This feature disables the IR remote control and the front panel buttons.Digital Pass ThroughThe second coaxial input on the DAC3 can be reconfigured as a digital output. In output mode, any selected digital input (including USB) will pass through to the coaxial output. The digital pass through is bit-transparent and even supports DSD (DoP 1.1). Dolby digital and DTS formats can also be passed through to a surround processor.Bi-Directional 12 Volt TriggerBenchmark re-invents the 12 volt trigger. The trigger connection on the DAC2 can be used as an input, an output, or both. It is compatible with any common 12 volt trigger input or output. The trigger can be used to turn a power amplifier on or off automatically. The DAC3 will also respond to a 12 volt trigger to follow the actions of another audio component.Power SwitchThe power switch can place the DAC3 in standby, or full shut down. In full shut down, the unit will still respond to the trigger input and the IR remote control. Power consumption is less than 0.5 W in full shut down.Low Power ConsumptionThe DAC3 uses high-efficiency low noise power supplies and may be operated from any standard international voltage without adjustment. Power consumption is 12 W typical.Distributed Power RegulationTo achieve the lowest possible noise, the DAC3 uses distributed power supply regulation. Each critical subsystem has at least one dedicated low-noise voltage regulator.Awards

Benchmark DAC3 HGC Reference Stereo Preamp PCM and D/A Converter . Condition is Used. Shipped with USPS Ground Advantage.The DAC3 is Benchmarks newest 2-channel D/A converter featuring the new ESS Technologies ES9028PRO converter chip. The DAC3 converter has lower THD and THD+N noise than Benchmarks DAC2 converter.Benchmarks DAC1 and DAC2 D/A converter families have been the reference to which other converters have been compared. It is rare to find a converter review that does not draw comparisons to the DAC1 or the DAC2. Benchmark converters are in daily use at many of the worlds finest recording studios and mastering rooms. Benchmark converters are also enjoyed by thousands of audiophiles. Benchmark has raised the bar again ... the DAC3 defines a new reference.Reference PerformanceThe DAC3 delivers outstanding musical detail and precise stereo imaging. It employs an advanced high-headroom digital filter design, and a high-sample-rate Asynchronous USB Audio interface. All inputs are fully isolated from interface jitter by Benchmarks new UltraLock3™ jitter attenuation system.Internal digital processing and conversion is 32-bits, and this processing includes 3.5 dB of headroom above 0 dBFS. This headroom prevents the DSP overloads that commonly occur in other D/A converters.Four balanced 32-bit D/A converters are summed together to create each balanced analog output. This 4:1 summation provides a 6 dB noise reduction, and gives the DAC3 industry-leading performance.Native DSD ConversionAll digital inputs on the DAC3 support native 192 kHz PCM or DSD64 conversion. From any input, DSD is transported with bit accuracy over DoP 1.1. DSD and PCM are both natively converted to analog. There are no DSD to PCM or PCM to DSD conversions to compromise the quality of the music. The DAC3 conversion system seamlessly switches between native PCM and native DSD conversion. DSD over DoP 1.1 is supported by many media players, and DSD downloads are now available from several sources.Direct Connectivity to Power AmplifiersBenchmark DAC1, DAC2, and DAC3 converters are designed to directly drive power amplifiers and speakers. Benchmark converters feature adjustable low-impedance passive attenuators at the XLR outputs that can be used to optimize the interface to the power amplifier (or powered monitor). This unique Benchmark feature optimizes the gain staging between the DAC and the power amplifier. Proper gain staging cannot be overemphasized. When audio stages are properly matched, each component in the audio chain is able to operate at its optimum signal level, and the system performance is significantly improved.Sonically-Neutral Studio MonitoringAll Benchmark converters are designed for maximum transparency. This transparency is absolutely essential in the studio monitoring chain. For this reason, DAC3 converters are ideal for critical reference-quality professional systems. Unlike many competing products, the DAC3 is not designed to add euphonic coloration to the audio. Instead it is designed to be as uncolored and natural as possible.

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies Benchmark DAC3 B DAC; D/A Converter (1/4) Product SKU: 53898 Voltage: 100-240V # of Owners: 1 Service History: None Serial Number: 20530321 Age: Unknown Tobacco Exposure: No MSRP: $1899 Cosmetic Description: Very good condition with minimal visible cosmetic wear including a few faint scratches on the left surface. This item looks like new from just a few feet away. Youll have to examine very closely to find any signs of wear. What is Included: DAC, Manual, Trigger cable, Power cable, Factory packaging Other Notes: The DAC3 B is the basic D/A converter in Benchmarks DAC3 converter series. The DAC3 B is the ideal converter to use in front of Benchmarks HPA4 headphone amplifier or LA4 line amplifier. It is also ideal for many professional studio applications. It delivers the full performance of the flagship DAC3 HGC, but eliminates the volume control, the analog inputs, the mute and polarity controls, and the headphone amplifier. -Benchmark Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Cost to ship this item within the contiguous United States is a flat rate of $37- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.