Please Read!! I don’t know much about this unit. It has only been tested to see if it turns on and as you can see in the pictures it does with no issues. I have no way of further testing this so I am selling AS-IS. Because I am selling as is I am listing this unit “for parts” but this could be a fully functioning unit, I simply don’t know. Unit comes in original box and original shipper box. The shipper box has damage but the inner item box is in good condition. Only what you see in the pictures is included. If you don’t see it in the pictures, it isn’t included. The unit did not have a power cable but it is a standard cable so I simply pulled my computer cable that uses the same type of cord to power the unit on but this cable I will not be including. I need it for my computer and they are only a couple of dollars online. Again, this is being sold AS-IS and “for parts” but this could possibly be a fully working unit. I tested for power and included pictures of that for you to see. The unit is in good cosmetic condition (see pictures)

Bel canto pre 3. Amazing pre digital pre amplifier In very good condition. All packaging and accessories available. Any questions please ask! I am selling matching power amplifier - Bel canto ref1000mk2. Package deal may be possible please contact.

Classic audiophile preamp from Bel Canto Design. This unit was recently inspected and serviced by Matt Cramer of Ace Tomato Audio, the Bel Canto Design factory-authorized service center, who gave it a full bill of health: I started by running some frequency tests and all looks good. Basically the unit measure perfectly flat. ... You’ve got a late Rev B unit thats a perfect candidate for upgrades. Im happy to share the upgrade options Matt suggested. There is a small blemish at the rear of the top of the unit, so I cant call it mint, but it is in excellent condition. A manual and power cable are included, as is an aftermarket preprogrammed remote. (Other remote options ranging from original to aftermarket, and from $800 to $300, are available from Ace Tomato.) Im also throwing in two WBC XLR cables (Canare Cable, Neutrik connector) to take advantage of the units balanced connections. The Pre1 comes double boxed in factory packaging. Specifications Volume setting for unity gain • 84 Input overload • 5 Volts rms Bandwidth Into >600 Ohms • 0 Hz-200 kHz Signal to Noise Ratio re 1 volt out • >100 dB A weighted, 20-20KHz Distortion at 1 Volts rms Out • <0.01% Input configuration and impedance • Single-ended/balanced 20K ohm Output Options • 2-XLR Balanced; 2-RCA; 1-buffered RCA Tape Out Output Impedance • 50 ohms Maximum Output Level • 10 volts rms Balanced Gain Single-ended • 16 dB Gain Balanced • 16 dB Power Requirements • 100-120 VAC 50-60 Hz or 230-240 VAC 50-60 Hz 25VA Size • 17.5”W x 15”D x 4”H (mm x mm x mm) Weight • 14lbs. (6.5kg) The Pre1 output stage uses the latest integrated technology to combine multiple amplifiers and Laser trimmed precision resistors in a true balanced output stage. This balanced stage mimics the operation of a transformer, providing ideal line-level audio drive into either a balanced or single-ended load. This operation eliminates ground loop issues with power amplifiers when used with either the RCA outputs or the XLR. This assures maximum signal to noise and extremely low distortion with the shortest audio signal path. The power supply uses a separate low noise regulation for each channel’s gain stage. Audio grade decoupling capacitors, star grounding and careful signal routing insure that low-level signals are preserved. The volume control is a precision Crystal 3310 potentiometer controlled by a microcontroller. This device provides extremely low noise and distortion coupled with high accuracy. We have found the sonic quality to be as good as or better than the best potentiometers and switched attenuators with a long useful life and no wear The input processing provides two (2) true balanced input connections and three (3) RCA jack connections plus Tape In. The Tape Output is an RCA output with an active audio-grade buffer preamplifier to isolate the internal signal bus from the tape output. The main outputs are a single-ended RCA and a balanced connection for use with balanced cables and power amplifier inputs. The elegant simplicity of the signal path and gain stage allows the Pre1 to preserve the audio signal quality.

Bel Canto e.One Pre5 Preamplifier - Audiophile Grade, Pristine Condition with High-End Performance I am replacing this preamp with a tube preamp, which is the only reason for selling. This preamp is very warm and life-like, one of the best I have had in my system. Item SpecificsCondition: Used - Item is pristine, showing minimal signs of use.Brand: Bel CantoModel: Pre5Type: PreamplifierFeatures: Multiple inputs and outputs, High-quality internal components, Balanced and unbalanced connections, Sleek designColor: SilverAudio Inputs: XLR, RCAAudio Outputs: XLR, RCARefine your audio system with the Bel Canto Pre5 Preamplifier, renowned for its exceptional sound quality and audiophile-grade performance. Designed for discerning listeners, the Pre5 combines detailed sound reproduction with versatile connectivity, making it a centerpiece in any high-end audio setup. This Pre5 is in pristine condition, with careful handling and minimal use. Its appearance and functionality are like-new, with no noticeable blemishes.Renowned for its clear, transparent sound, the Pre5 ensures that every note and nuance is faithfully reproduced, thanks to its high-quality internal components and design.Features a comprehensive array of inputs and outputs, including balanced XLR and unbalanced RCA connections, catering to a variety of sources and amplifiers.High-resolution audio performance for the most detailed listening experience.Versatile input/output options support a wide range of high-end audio configurations.Sleek, minimalist design that complements any audio enthusiasts collection.User-friendly interface for easy control and customization of your listening experience.Bel Canto Pre5 PreamplifierOriginal power cordOriginal remote controlOriginal packagingUsed in pet-free and smoke-free environment.This item is sold as is, and returns are not accepted. I will ship via UPS Ground with well-padded packaging.

This is a highly regarded Balanced Design Preamplifier from Bel Canto MSRP $2000. The unit comes with a remote control and the latest r1.01 control software from Bel Canto. The unit is in excellent physical condition as pictured and is in perfect working order. • All analog, low noise, low distortion architecture for controlling up to six (6) 2-channel inputs including 1 balanced input • Fully balanced XLR outputs for optimum interface to the power amplifier • 4-layer PC board design for superior signal routing, grounding and power supply routing • Latest generation of low-noise, low-distortion high speed audio buffers, level controls and output drivers provide superb measured and subjective audio quality • Independent digital and analog transformers and multi-stage power supplies for precise power to the sensitive analog circuitry • Precision audio grade resistors and no capacitors in the audio signal path • Ultra low noise second stage regulation for the analog amplifier sections • Home Theater Bypass mode on Input 5 • Digitally controlled analog volume control for optimum signal architecture • New Single-Knob user interface provides simple, intuitive control function

Everything functions perfectly. This is one of the best pres I’ve ever owned. Cosmetically almost perfect. Can’t really name any blemishes but I’d just say 9.5/10. Comes with original box, packing materials, manuals and remote. Included are a pair of Amperex 6jd8 tubes. Note that there is no phono input, line only. Only thing I do not have is the original IEC power cable. I can include a random one if you ask before purchase. Will ship with great care. Thanks!

Classic audiophile preamp from Bel Canto Design. This unit was recently inspected and serviced by Matt Cramer of Ace Tomato Audio, the Bel Canto Design factory-authorized service center, who gave it a full bill of health: I started by running some frequency tests and all looks good. Basically the unit measure perfectly flat. ... You’ve got a late Rev B unit thats a perfect candidate for upgrades. Im happy to share the upgrade options Matt suggested. There is a small blemish at the rear of the top of the unit, so I cant call it mint, but it is in excellent condition. A manual and power cable are included, as is an aftermarket preprogrammed remote. (Other remote options ranging from original to aftermarket, and from $800 to $300, are available from Ace Tomato.) Im also throwing in two WBC XLR cables (Canare Cable, Neutrik connector) to take advantage of the units balanced connections. The Pre1 comes double boxed in factory packaging. Specifications Volume setting for unity gain • 84 Input overload • 5 Volts rms Bandwidth Into >600 Ohms • 0 Hz-200 kHz Signal to Noise Ratio re 1 volt out • >100 dB A weighted, 20-20KHz Distortion at 1 Volts rms Out • <0.01% Input configuration and impedance • Single-ended/balanced 20K ohm Output Options • 2-XLR Balanced; 2-RCA; 1-buffered RCA Tape Out Output Impedance • 50 ohms Maximum Output Level • 10 volts rms Balanced Gain Single-ended • 16 dB Gain Balanced • 16 dB Power Requirements • 100-120 VAC 50-60 Hz or 230-240 VAC 50-60 Hz 25VA Size • 17.5”W x 15”D x 4”H (mm x mm x mm) Weight • 14lbs. (6.5kg) The Pre1 output stage uses the latest integrated technology to combine multiple amplifiers and Laser trimmed precision resistors in a true balanced output stage. This balanced stage mimics the operation of a transformer, providing ideal line-level audio drive into either a balanced or single-ended load. This operation eliminates ground loop issues with power amplifiers when used with either the RCA outputs or the XLR. This assures maximum signal to noise and extremely low distortion with the shortest audio signal path. The power supply uses a separate low noise regulation for each channel’s gain stage. Audio grade decoupling capacitors, star grounding and careful signal routing insure that low-level signals are preserved. The volume control is a precision Crystal 3310 potentiometer controlled by a microcontroller. This device provides extremely low noise and distortion coupled with high accuracy. We have found the sonic quality to be as good as or better than the best potentiometers and switched attenuators with a long useful life and no wear The input processing provides two (2) true balanced input connections and three (3) RCA jack connections plus Tape In. The Tape Output is an RCA output with an active audio-grade buffer preamplifier to isolate the internal signal bus from the tape output. The main outputs are a single-ended RCA and a balanced connection for use with balanced cables and power amplifier inputs. The elegant simplicity of the signal path and gain stage allows the Pre1 to preserve the audio signal quality.

About this product:Class-Leading 124dB Dynamic Range, 24-Bit/192kHz USB Input, and Advanced Master Clocks Attest to Performance of the Bel Canto e.One DAC 2.8: U.S.A.-Made DAC Delivers Authoritative SoundNo-nonsense engineering, straight-up superb performance, exceptional low-noise analog circuitry, and cutting-edge flexibility combine in harmonious bliss in the Bel Canto e.One DAC 2.8 DAC/control preamplifier. Belying its conveniently compact form and intentionally minimalist aesthetics, the U.S.A.-made e.One DAC 2.8 dazzles with an array of features that help play music with stunning detail, openness, authority, purity, and dynamics. With e.One DAC 2.8 in your chain, audio becomes as fun as peeling the shrink wrap off a new LP for the first time. Never mind this components 14-pound or 8.5 x 12.5 x 3.5-inch (WDH) dimensions. It delivers like a full-size heavyweight on steroids whether employed in a full stereo setup or computer-audio rig. And it upsamples any incoming data that is less than 24-bit/192kHz to that standard.Featuring Bel Cantos High-Dynamic Resolution Core – a technology comprised of ultra-low-noise master clocks, advanced asynchronous interfaces, and dual-mode high-efficiency power supplies – e.One DAC 2.8 also includes an asynchronous 24-bit/192kHz USB2.0 input that works with the built-in, dual, ultra-low-noise Femtosecond clocks to provide arresting fidelity from your files and streamed music. Bel Canto Virtual Battery Technology isolates the converters from power-line noise and ensures low-impedance power delivery to (and isolation of) the electronics. No wonder e.One DAC 2.8 boasts a class-leading 124dB dynamic range. A 24-bit high-definition volume control, 36-button infrared remote control, and analog input also come standard. Ditto a dedicated high-current headphone output for driving your phones and five asynchronous digital inputs for handy versatility.On the front of the unit, a programmable eight-character display seamlessly works with the dual-functioning one-knob interface to access all basic functions in a few quick clicks. Cool-running operation and a heavy-gauge, resonance-defeating steel chassis round out an all-rounder powerhouse. SKU:UTRA2036218 Warranty: This unit comes with a 30 day Music Direct warranty. Whats Included:Accessories: Manual, Power Cord, Remote, (2x) AAA Batteries, original packing Notes: 9/10 Condition with no signs of damage or abuse. All functions tested successfully, sonically perfect. Specifications:24bit Data at 192KS/s: AES XLR, SPDIF BNC/RCA, TOSLINK, USBMaster Clock noise: 0.07 picoseconds RMSMaximum Output: 4.5Vrms balanced XLR, 2.25Vrms RCAOutput Impedance: 200 ohms balanced XLR, 100 ohms RCAFrequency Response: 20 Hz-20 KHz, +/- 0.5dBTHD+N: <0.001%, 1KHzOutput Noise: 3.3uVrms A-weighted 20Hz-20KHzDynamic Range: 124dB A-weighted 20Hz-20KHzMaximum Input: 2.5 Vrms RCAInput Impedance: 12K ohms RCATHD+N: 0.003%, 2.5Vrms in, 1KHzDynamic Range: 110dB, A-weighted 20Hz-20KHzHeadphone Output: Current and Voltage Level: 4.5Vrms, 300mA THD+N: 0.0015%, 1KHz Output Noise: 3.3uVrms, A-weighted 20Hz-20KHzPower Usage On: 8WPower Usage Off: 0.0WPower Requirement: 100-120VAC, 220-240VAC 50/60 HzDimensions (WDH): 8.5 x 12.5 x 3.5Weight: 14 lbs. Shipping Policy:If you require shipping to Alaska, Hawaii, or Puerto Rico, please contact us first before making an offer.

Classic audiophile preamp from Bel Canto Design. This unit was recently inspected and serviced by Matt Cramer of Ace Tomato Audio, the Bel Canto Design factory-authorized service center, who gave it a full bill of health: I started by running some frequency tests and all looks good. Basically the unit measure perfectly flat. ... You’ve got a late Rev B unit thats a perfect candidate for upgrades. Im happy to share the upgrade options Matt suggested. There is a small blemish at the rear of the top of the unit, so I cant call it mint, but it is in excellent condition. A manual and power cable are included, as is an aftermarket preprogrammed remote. (Other remote options ranging from original to aftermarket, and from $800 to $300, are available from Ace Tomato.) Im also throwing in two WBC XLR cables (Canare Cable, Neutrik connector) to take advantage of the units balanced connections. The Pre1 comes double boxed in factory packaging. Specifications Volume setting for unity gain • 84 Input overload • 5 Volts rms Bandwidth Into >600 Ohms • 0 Hz-200 kHz Signal to Noise Ratio re 1 volt out • >100 dB A weighted, 20-20KHz Distortion at 1 Volts rms Out • <0.01% Input configuration and impedance • Single-ended/balanced 20K ohm Output Options • 2-XLR Balanced; 2-RCA; 1-buffered RCA Tape Out Output Impedance • 50 ohms Maximum Output Level • 10 volts rms Balanced Gain Single-ended • 16 dB Gain Balanced • 16 dB Power Requirements • 100-120 VAC 50-60 Hz or 230-240 VAC 50-60 Hz 25VA Size • 17.5”W x 15”D x 4”H (mm x mm x mm) Weight • 14lbs. (6.5kg) The Pre1 output stage uses the latest integrated technology to combine multiple amplifiers and Laser trimmed precision resistors in a true balanced output stage. This balanced stage mimics the operation of a transformer, providing ideal line-level audio drive into either a balanced or single-ended load. This operation eliminates ground loop issues with power amplifiers when used with either the RCA outputs or the XLR. This assures maximum signal to noise and extremely low distortion with the shortest audio signal path. The power supply uses a separate low noise regulation for each channel’s gain stage. Audio grade decoupling capacitors, star grounding and careful signal routing insure that low-level signals are preserved. The volume control is a precision Crystal 3310 potentiometer controlled by a microcontroller. This device provides extremely low noise and distortion coupled with high accuracy. We have found the sonic quality to be as good as or better than the best potentiometers and switched attenuators with a long useful life and no wear The input processing provides two (2) true balanced input connections and three (3) RCA jack connections plus Tape In. The Tape Output is an RCA output with an active audio-grade buffer preamplifier to isolate the internal signal bus from the tape output. The main outputs are a single-ended RCA and a balanced connection for use with balanced cables and power amplifier inputs. The elegant simplicity of the signal path and gain stage allows the Pre1 to preserve the audio signal quality.

Sparingly Used Demo Unit Digital Section: Maximum Input Data Rate: 24bit Data at 192Ks/s: 24bit Data at 96Ks/s: Master Clock jitter: Analog 24/192 DAC Section: Maximum Output: Output Impedance: Frequency Response: THD+N: Output Noise: Dynamic Range: Analog 24/192 ADC Section: Maximum Input: Input Impedance: Frequency Response: THD+N: Dynamic Range: Headphone Section: Maximum Output: THD+N: Output Noise: General: Power Usage On: Power Usage Off: Internally Set Operating Voltages: Dimensions: Weight: AES 1100hm XLR, SPDIF 750hm, TOSLINK USB 2picosecond RMS 4Vrms balanced XLR, 2Vrms RCA 200 ohms balanced XLR, 100 ohms RCA 20 Hz-20KHz, +/- 0.5dB <0.0015%, 4Vrms balanced out, 1KHz 3.3uVrms, A-weighted 20Hz-20KHz 122dB, A-weighted 20Hz-20KHz 2.5Vrms RCA 12K ohms RCA 20 Hz-20KHz, +/- 0.5dB 0.003%, 2.5Vrms in, 1KHz 110dB, A-weighted 20Hz-20KHz 138mW 0.0055% 35mW, 1KHz 17uVrms, A-weighted 20Hz-20KHz 8W 0.0W 100-120VAC or 230-240VAC 50/60 Hz 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm) 14lbs. (6.5 kg) Features and specifications are subject to improvements and changes without prior notice.

Sparingly Used Demo Unit Digital Section: Maximum Input Data Rate: 24bit Data at 192Ks/s: 24bit Data at 96Ks/s: Master Clock jitter: Analog 24/192 DAC Section: Maximum Output: Output Impedance: Frequency Response: THD+N: Output Noise: Dynamic Range: Analog 24/192 ADC Section: Maximum Input: Input Impedance: Frequency Response: THD+N: Dynamic Range: Headphone Section: Maximum Output: THD+N: Output Noise: General: Power Usage On: Power Usage Off: Internally Set Operating Voltages: Dimensions: Weight: AES 1100hm XLR, SPDIF 750hm, TOSLINK USB 2picosecond RMS 4Vrms balanced XLR, 2Vrms RCA 200 ohms balanced XLR, 100 ohms RCA 20 Hz-20KHz, +/- 0.5dB <0.0015%, 4Vrms balanced out, 1KHz 3.3uVrms, A-weighted 20Hz-20KHz 122dB, A-weighted 20Hz-20KHz 2.5Vrms RCA 12K ohms RCA 20 Hz-20KHz, +/- 0.5dB 0.003%, 2.5Vrms in, 1KHz 110dB, A-weighted 20Hz-20KHz 138mW 0.0055% 35mW, 1KHz 17uVrms, A-weighted 20Hz-20KHz 8W 0.0W 100-120VAC or 230-240VAC 50/60 Hz 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm) 14lbs. (6.5 kg) Features and specifications are subject to improvements and changes without prior notice.

Sparingly Used Demo Unit Digital Section: Maximum Input Data Rate: 24bit Data at 192Ks/s: 24bit Data at 96Ks/s: Master Clock jitter: Analog 24/192 DAC Section: Maximum Output: Output Impedance: Frequency Response: THD+N: Output Noise: Dynamic Range: Analog 24/192 ADC Section: Maximum Input: Input Impedance: Frequency Response: THD+N: Dynamic Range: Headphone Section: Maximum Output: THD+N: Output Noise: General: Power Usage On: Power Usage Off: Internally Set Operating Voltages: Dimensions: Weight: AES 1100hm XLR, SPDIF 750hm, TOSLINK USB 2picosecond RMS 4Vrms balanced XLR, 2Vrms RCA 200 ohms balanced XLR, 100 ohms RCA 20 Hz-20KHz, +/- 0.5dB <0.0015%, 4Vrms balanced out, 1KHz 3.3uVrms, A-weighted 20Hz-20KHz 122dB, A-weighted 20Hz-20KHz 2.5Vrms RCA 12K ohms RCA 20 Hz-20KHz, +/- 0.5dB 0.003%, 2.5Vrms in, 1KHz 110dB, A-weighted 20Hz-20KHz 138mW 0.0055% 35mW, 1KHz 17uVrms, A-weighted 20Hz-20KHz 8W 0.0W 100-120VAC or 230-240VAC 50/60 Hz 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm) 14lbs. (6.5 kg) Features and specifications are subject to improvements and changes without prior notice.

Bel Canto E1X DAC / Control Preamp - Boxed with Remote & Manual. All in excellent condition and full working order. 220-240V Any questions re. discounts, shipping etc. - please call.Will be promptly sent via tracked courier delivery - or collect and save on the delivery charge Overseas bidders - please note you will be responsible for payment of any local duties and taxes upon import. Description: The new e1X line incorporates many ground-breaking designs from the Black series. Each e1X component is designed with great attention to detail, focusing on our unique input approach, DAC core performance and power amplifier technologies that optimise and maintain the purest signal quality. Built in a constrained layer damped chassis with high-grade aluminium defines the simple and elegant look.The new e1X DAC/Control Preamp, based around our High Dynamic Resolution HDR-II core and high-speed Asynchronous Multi-Input Processor (AMiP) platform is Bel Cantos most versatile DAC preamplifier.Stream music through Ethernet or USB, a full suite of digital inputs, line level inputs, dedicated subwoofer output where you can also independently insert a low pass filter into the subwoofer output to help control sub levels. The filters are adjustable anywhere from 40Hz to 120Hz (in increments of 10Hz), depending on the low-frequency extension of your main speakers and the size of your subwoofer. The provision of these high-pass and low-pass filters is far-sighted, as it enables far superior integration of your main speakers with your subwoofer than would otherwise be possible.The e1X also has a full MM/MC software controlled analog phono stage.Features include software controlled Trim, Bass EQ, and subwoofer filter management. Roon Ready or DLNA control with Bel Canto Seek iOS APP to stream Tidal/MQA, Qobuz or your personal library.The e1X also has fully optimised control for left and right balance adjustment, to enable you to fine tune the drive for the room perfectly.Stereophile ConclusionRereading my auditioning notes, I was struck by how difficult it had been to characterize the sound of the Bel Canto e1X DAC. It might use an almost two-decade–old DAC chip, but with its very high resolution, low noise, and equally low distortion—all confirmed in my measurements—this processor really doesnt have a sound of its own. Coupled with its versatile controls and its analog inputs, the e1X DAC is about as good as digital playback gets for a relatively affordable price.I was also impressed by both the measured performance and the sound quality of the line and phono analog inputs. And the preamplifiers versatile Tilt and Bass EQ controls proved to be a useful bonus in my auditioning of these inputs.Description/ Specs: Roon Ready streaming D/A processor/ preamplifier. Inputs: coaxial and TosLink optical S/PDIF (supports 16- and 24-bit PCM 44.1–192kHz); 10/100 Ethernet (supports 24-bit PCM up to 192kHz, MQA, and DSD64); USB2 (supports 24-bit PCM to 192kHz, MQA, and DSD64/128 in DoP format); and USB Type A port for use with external FAT32-formatted storage devices. Analog inputs: 2 pairs unbalanced line (RCA); 1 pair unbalanced MM/MC phono (RCA). Analog outputs: 1 pair balanced (XLR); 1 pair unbalanced (RCA); 1 pair unbalanced subwoofer (RCA); ¼ stereo headphone. Maximum output level: 5.5V RMS (balanced); 2.75V RMS (unbalanced); 4.5V (headphone; minimum load 32 ohms); 4.5V RMS with Bass Management (subwoofer). Analog input impedance: 10k ohms (line); 47k ohms (MM phono); 50, 100, 500, 1000 ohms (MC phono). Analog output impedance: 100 ohms (balanced; minimum load: 600 ohms); 100 ohms (unbalanced). Line input maximum input level: 2.2V RMS. Line input THD+N (1kHz): 0.003%. Line input dynamic range: 110dB, A-weighted 20Hz–20kHz. Phono input sensitivity: 2.5–5mV (MM); 0.25–0.5mV (MC). RIAA accuracy: 50Hz–15kHz, ±0.25dB. Phono input THD+N: <0.01% at 1kHz, A-weighted. Phono input S/N ratio: >70dB A-weighted. Supplied accessories: remote control, manual; Bel Canto Seek app is available for iOS devices. Dimensions: 17.75 (451mm) W × 15.75 (400mm) H × 3.25 (83mm) D. Weight: 14lb (6.4kg). Finish: Black-anodized aluminum

I sell my Bel Canto e.One PRe3 preamplifier with remote control in a perfect working condition (also the remote). It has only a few minor scratches - see pictures. For positive reviews there is a lot of information in internet. In the package: - Bel Canto e.One PRe 3 - original remote control - power cable Private sell therefore noo warranties or right to return.

This preamp is in very good condition and has been well-cared for and never subjected to abuse. It has only been used in smoke-free environments. Having been used as a reference sample for our testing purposes, it does not have as much use on it as it would have had in a personal system. The PRe3 sets a benchmark for design, quality and sonic performance, continuing Bel Canto’s heritage of musicality and realism. The Bel Canto PRe3 represents a powerful statement in high performance audio control preamplifiers. Its superb audio performance and transparency renders it a modern standard in control preamplifier design: • All analog, low noise, low distortion architecture for controlling up to six (6) 2-channel inputs including 1 balanced input • Fully balanced XLR outputs for optimum interface to the power amplifier • 4-layer PC board design for superior signal routing, grounding and power supply routing • Latest generation of low-noise, low-distortion high speed audio buffers, level controls and output drivers provide superb measured and subjective audio quality • Independent digital and analog transformers and multi-stage power supplies for precise power to the sensitive analog circuitry • Precision audio grade resistors and no capacitors in the audio signal path • Ultra low noise second stage regulation for the analog amplifier sections • Home Theater Bypass mode on Input 5 • Digitally controlled analog volume control for optimum signal architecture • New Single-Knob user interface provides simple, intuitive control function MSRP $1995

Bel Canto e.One Pre5 Balanced Analog Control Preamp The e.One Pre5 is a highly dynamic fully balanced analog preamplifier. The precise circuitry and compact balanced architecture deliver a pure signal to your amplifier revealing the detail and natural tone of the finest recordings. Fully Balanced Internal Architecture for Lowest Noise and Distortion XLR and 4 High Quality RCA Inputs Independently Buffered XLR and RCA Outputs Remote Control Black Faceplate This unit is our showroom demo, having experienced minimal usage and remaining in excellent condition. Included: Original accessories, remote control, original packaging. Serial: RL-335 Available to collect at the Audio Lounge Store in London: Audio Lounge London 138 Wigmore Street London W1U 3SG Call us: +44 (0)20 7487 4080 Email us: hello@audiolounge.co.uk Our inventory includes numerous pre-owned and ex-demonstration products that are currently not advertised. If you have specific requirements, please dont hesitate to reach out to us, and we will gladly assist you in finding the right product.

Bel Canto E1X DAC / Control Preamp - Boxed with Remote & Manual. All in excellent condition and full working order. 220-240V Any questions re. discounts, shipping etc. - please call.Will be promptly sent via tracked courier delivery - or collect and save on the delivery charge Overseas bidders - please note you will be responsible for payment of any local duties and taxes upon import. Description: The new e1X line incorporates many ground-breaking designs from the Black series. Each e1X component is designed with great attention to detail, focusing on our unique input approach, DAC core performance and power amplifier technologies that optimise and maintain the purest signal quality. Built in a constrained layer damped chassis with high-grade aluminium defines the simple and elegant look.The new e1X DAC/Control Preamp, based around our High Dynamic Resolution HDR-II core and high-speed Asynchronous Multi-Input Processor (AMiP) platform is Bel Cantos most versatile DAC preamplifier.Stream music through Ethernet or USB, a full suite of digital inputs, line level inputs, dedicated subwoofer output where you can also independently insert a low pass filter into the subwoofer output to help control sub levels. The filters are adjustable anywhere from 40Hz to 120Hz (in increments of 10Hz), depending on the low-frequency extension of your main speakers and the size of your subwoofer. The provision of these high-pass and low-pass filters is far-sighted, as it enables far superior integration of your main speakers with your subwoofer than would otherwise be possible.The e1X also has a full MM/MC software controlled analog phono stage.Features include software controlled Trim, Bass EQ, and subwoofer filter management. Roon Ready or DLNA control with Bel Canto Seek iOS APP to stream Tidal/MQA, Qobuz or your personal library.The e1X also has fully optimised control for left and right balance adjustment, to enable you to fine tune the drive for the room perfectly.Stereophile ConclusionRereading my auditioning notes, I was struck by how difficult it had been to characterize the sound of the Bel Canto e1X DAC. It might use an almost two-decade–old DAC chip, but with its very high resolution, low noise, and equally low distortion—all confirmed in my measurements—this processor really doesnt have a sound of its own. Coupled with its versatile controls and its analog inputs, the e1X DAC is about as good as digital playback gets for a relatively affordable price.I was also impressed by both the measured performance and the sound quality of the line and phono analog inputs. And the preamplifiers versatile Tilt and Bass EQ controls proved to be a useful bonus in my auditioning of these inputs.Description/ Specs: Roon Ready streaming D/A processor/ preamplifier. Inputs: coaxial and TosLink optical S/PDIF (supports 16- and 24-bit PCM 44.1–192kHz); 10/100 Ethernet (supports 24-bit PCM up to 192kHz, MQA, and DSD64); USB2 (supports 24-bit PCM to 192kHz, MQA, and DSD64/128 in DoP format); and USB Type A port for use with external FAT32-formatted storage devices. Analog inputs: 2 pairs unbalanced line (RCA); 1 pair unbalanced MM/MC phono (RCA). Analog outputs: 1 pair balanced (XLR); 1 pair unbalanced (RCA); 1 pair unbalanced subwoofer (RCA); ¼ stereo headphone. Maximum output level: 5.5V RMS (balanced); 2.75V RMS (unbalanced); 4.5V (headphone; minimum load 32 ohms); 4.5V RMS with Bass Management (subwoofer). Analog input impedance: 10k ohms (line); 47k ohms (MM phono); 50, 100, 500, 1000 ohms (MC phono). Analog output impedance: 100 ohms (balanced; minimum load: 600 ohms); 100 ohms (unbalanced). Line input maximum input level: 2.2V RMS. Line input THD+N (1kHz): 0.003%. Line input dynamic range: 110dB, A-weighted 20Hz–20kHz. Phono input sensitivity: 2.5–5mV (MM); 0.25–0.5mV (MC). RIAA accuracy: 50Hz–15kHz, ±0.25dB. Phono input THD+N: <0.01% at 1kHz, A-weighted. Phono input S/N ratio: >70dB A-weighted. Supplied accessories: remote control, manual; Bel Canto Seek app is available for iOS devices. Dimensions: 17.75 (451mm) W × 15.75 (400mm) H × 3.25 (83mm) D. Weight: 14lb (6.4kg). Finish: Black-anodized aluminum

Bel Canto E1X DAC / Control Preamp - Boxed with Remote & Manual. All in excellent condition and full working order. 220-240V Any questions re. discounts, shipping etc. - please call.Will be promptly sent via tracked courier delivery - or collect and save on the delivery charge Overseas bidders - please note you will be responsible for payment of any local duties and taxes upon import. Description: The new e1X line incorporates many ground-breaking designs from the Black series. Each e1X component is designed with great attention to detail, focusing on our unique input approach, DAC core performance and power amplifier technologies that optimise and maintain the purest signal quality. Built in a constrained layer damped chassis with high-grade aluminium defines the simple and elegant look.The new e1X DAC/Control Preamp, based around our High Dynamic Resolution HDR-II core and high-speed Asynchronous Multi-Input Processor (AMiP) platform is Bel Cantos most versatile DAC preamplifier.Stream music through Ethernet or USB, a full suite of digital inputs, line level inputs, dedicated subwoofer output where you can also independently insert a low pass filter into the subwoofer output to help control sub levels. The filters are adjustable anywhere from 40Hz to 120Hz (in increments of 10Hz), depending on the low-frequency extension of your main speakers and the size of your subwoofer. The provision of these high-pass and low-pass filters is far-sighted, as it enables far superior integration of your main speakers with your subwoofer than would otherwise be possible.The e1X also has a full MM/MC software controlled analog phono stage.Features include software controlled Trim, Bass EQ, and subwoofer filter management. Roon Ready or DLNA control with Bel Canto Seek iOS APP to stream Tidal/MQA, Qobuz or your personal library.The e1X also has fully optimised control for left and right balance adjustment, to enable you to fine tune the drive for the room perfectly.Stereophile ConclusionRereading my auditioning notes, I was struck by how difficult it had been to characterize the sound of the Bel Canto e1X DAC. It might use an almost two-decade–old DAC chip, but with its very high resolution, low noise, and equally low distortion—all confirmed in my measurements—this processor really doesnt have a sound of its own. Coupled with its versatile controls and its analog inputs, the e1X DAC is about as good as digital playback gets for a relatively affordable price.I was also impressed by both the measured performance and the sound quality of the line and phono analog inputs. And the preamplifiers versatile Tilt and Bass EQ controls proved to be a useful bonus in my auditioning of these inputs.Description/ Specs: Roon Ready streaming D/A processor/ preamplifier. Inputs: coaxial and TosLink optical S/PDIF (supports 16- and 24-bit PCM 44.1–192kHz); 10/100 Ethernet (supports 24-bit PCM up to 192kHz, MQA, and DSD64); USB2 (supports 24-bit PCM to 192kHz, MQA, and DSD64/128 in DoP format); and USB Type A port for use with external FAT32-formatted storage devices. Analog inputs: 2 pairs unbalanced line (RCA); 1 pair unbalanced MM/MC phono (RCA). Analog outputs: 1 pair balanced (XLR); 1 pair unbalanced (RCA); 1 pair unbalanced subwoofer (RCA); ¼ stereo headphone. Maximum output level: 5.5V RMS (balanced); 2.75V RMS (unbalanced); 4.5V (headphone; minimum load 32 ohms); 4.5V RMS with Bass Management (subwoofer). Analog input impedance: 10k ohms (line); 47k ohms (MM phono); 50, 100, 500, 1000 ohms (MC phono). Analog output impedance: 100 ohms (balanced; minimum load: 600 ohms); 100 ohms (unbalanced). Line input maximum input level: 2.2V RMS. Line input THD+N (1kHz): 0.003%. Line input dynamic range: 110dB, A-weighted 20Hz–20kHz. Phono input sensitivity: 2.5–5mV (MM); 0.25–0.5mV (MC). RIAA accuracy: 50Hz–15kHz, ±0.25dB. Phono input THD+N: <0.01% at 1kHz, A-weighted. Phono input S/N ratio: >70dB A-weighted. Supplied accessories: remote control, manual; Bel Canto Seek app is available for iOS devices. Dimensions: 17.75 (451mm) W × 15.75 (400mm) H × 3.25 (83mm) D. Weight: 14lb (6.4kg). Finish: Black-anodized aluminum

100% Authentic! All packages are shipped directly from Japan!Condition DescriptionFeatures and Remarks Input terminals: DIGITAL INPUTS x 5, ANALOG IN x 1 Output terminals: LINE OUT x 1, 120W 4?, 60W 8? Please Note shipping from Japan. Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

DescriptionAuthenticity: 100% AUTHENTIC! If you have any question about the condition, accessories, or anything about the product,Please feel free to message us. We are glad to answer all your concerns. ShippingDHL, Fedex Fastshipping3-10 business days after shipment(Tracking number + Insurance.)PaymentPlease give me the payment within 3days from the date of bid.About UsWe sell our items on other websites and in our retail stores in Japan at the same time.If the item was sold out before your purchase, your order will be cancelled and a full refund will be issued immediately. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you.

Ships Free!! BEL CANTO PRE 6 GEN II 7.1 Analog Pre Amplifier AUDIOPHILE. If you are looking at this amazing piece, chances are you know what it is capable of. This is an Analog Pre Amplifier. You can connect TWO 7.1 sources into it. It also has a dedicated 2 Channel BALANCED XLR input It has 7.1 XLR outputs. It was voted best 2 Channel pre amp on a review. The 2 channel performance is amazing but the 7.1 performance is also stunning. Zone 2 output with separate volume control I had my OPPO. 205 connected to it and the multichannel music sounds incredible. Movies sound dynamic and clear. I really hate having to let it go but I am downgrading and recently purchased a B&W Sound bar instead. It comes with the power cord but there is no remote. I programmed it with my Logic Harmony 665. So if you have a universal remote, it will work with this. Ships free!! Comes from a smoke free home. I have been on eBay for over 19 years with 100% feedback. Look at my other auctions. I have a top tier balanced interconnect for sale as well. Here are couple of reviews: http://www.soundstagexperience.com/equipment/belcantodesign_pre6.htm https://6moons.com/audioreviews/bcdpre6/pre6.html

Bel Canto e.One DAC 2.7 Control Preamp with Headphone Output (Black)STORE DEMO / FULL WARRANTYIncredible audio performance, features, and flexibility, the DAC2.7 is musically open, detailed, and natural sounding. HDR: High-Dynamic Resolution Core HDR Core is the result of 20+ years of engineering to refine the digital to analog process, and is comprised of 3 major components: Low Noise and Ultra Low Noise Master Clocks, Advanced Asynchronous Interfaces, and Dual Mode Low-Noise High Efficiency Power Supplies. HDR Core technology is fundamental to every e.One DAC and Integrated product, creating the most realistic, open, and defined musical experience possible. Built In Headphone Output This low-impedance, high-output headphone amp circuit has been designed to drive any pair of high quality headphones with pristine clarity. Youll be amazed at the musical depth they bring to your headset. Simple, Elegant Interface Designed to be functional and simple, the dual-functioning one knob interface is a joy to use. The programmable 8 character display works with it seamlessly to access all basic functions in a few clicks. The included 36 button infrared remote allows instant command functions and display editing. Asynchronous USB Input 24/192 Asynchronous input works with the internal dual Ultra Low Noise Femtosecond clocks to provide unprecedented audio sound quality and impact from your computer audio sources.FeaturesClass Leading 124dB Dynamic Range24 Bit Volume Control24/192 Asynchronous USB2.0Analog Input5 Asynchronous Digital InputsHigh Current Headphone Output DriverRemote ControlAvailable in Black or Silver FaceplateMAC USB 2.0 compatibility and custom Windows USB 2.0 driverSpecs:Digital Section24bit Data at 192KS/s: AES XLR, SPDIF BNC/RCA, TOSLINK, USBMaster Clock jitter: 70 femtoseconds RMS, 100Hz-1MHzAnalog 24/192 DAC SectionMaximum Output: 4.4Vrms balanced XLR, 2.2Vrms RCAOutput Impedance: 200 ohms balanced XLR, 100 ohms RCAFrequency Response: 20 Hz-20 KHz, +/- 0.5dBTHD+N: <0.0015%, 4Vrms balanced out, 1KHzOutput Noise: 3.3uVrms A-weighted 20Hz-20KHzDynamic Range: 124dB A-weighted 20Hz-20KHzAnalog 24/192 ADC SectionMaximum Output: 2.5 Vrms RCAInput Impedance: 12K ohms RCATHD+N: 0.003%, 2.5Vrms in, 1KHzDynamic Range: 110dB, A-weighted 20Hz-20KHzHeadphone SectionHeadphone Output Current and Voltage Level: 300mA peak at 4VrmsMaximum Output: 138mWTHD+N: 0.01% 35mW, 1KHzOutput Noise: 17uVrms, A-weighted 20Hz-20KHzGeneralPower Usage On: 7WPower Usage Off: 0.0WPower Requirement: 100-120VAC, 220-240VAC 50/60 HzDimensions: 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm)Weight: 14lbs. (6.5 kg) Check out all my items on the audiolab-outletBe sure to add me to your favorites list! PLEASE READ OUR POLICIES BELOW Payments:Payments must be made within 3 days of the sale of an item. Failure to pay within 3 days may result in cancellation of the sale OR an unpaid item case opened through eBay. IF YOU HAVE QUESTIONS, PLEASE MESSAGE US BEFORE BIDDING OR PURCHASING AN ITEM. Shipping:Shipping is to the confirmed address and will not be changed after the auction has ended. *** At this time we are NOT processing any shipments internationally or outside of the Lower Contiguous 48 States. AK & HI customers please inquire if you are interested in an item listed. Additional shipping may be required to process your order. We are also unable to ship our items to PO BOXES or APO/FPO addresses unless the item is small. Please inquire if you have any of these types of addresses *** Returns:ALL RETURNS MUST HAVE A RMA# FOR RETURN PROCESSING - Please contact us to obtain an RMA # We will accept items for return with 30 days of sale. Customers wishing to return product for any reasons other than the item being defective will be subject to paying for the cost of return shipping and a restocking fee. IN THE EVENT OF DAMAGE OR THE ITEM NOT AS DESCRIBED:Please contact us directly before opening any case or return request. We want to do everything in our power to offer the best Customer Service possible.

Bel Canto e.One DAC 2.7 Control Preamp with Headphone Output (Silver)STORE DEMO / FULL WARRANTYIncredible audio performance, features, and flexibility, the DAC2.7 is musically open, detailed, and natural sounding. HDR: High-Dynamic Resolution Core HDR Core is the result of 20+ years of engineering to refine the digital to analog process, and is comprised of 3 major components: Low Noise and Ultra Low Noise Master Clocks, Advanced Asynchronous Interfaces, and Dual Mode Low-Noise High Efficiency Power Supplies. HDR Core technology is fundamental to every e.One DAC and Integrated product, creating the most realistic, open, and defined musical experience possible. Built In Headphone Output This low-impedance, high-output headphone amp circuit has been designed to drive any pair of high quality headphones with pristine clarity. Youll be amazed at the musical depth they bring to your headset. Simple, Elegant Interface Designed to be functional and simple, the dual-functioning one knob interface is a joy to use. The programmable 8 character display works with it seamlessly to access all basic functions in a few clicks. The included 36 button infrared remote allows instant command functions and display editing. Asynchronous USB Input 24/192 Asynchronous input works with the internal dual Ultra Low Noise Femtosecond clocks to provide unprecedented audio sound quality and impact from your computer audio sources.FeaturesClass Leading 124dB Dynamic Range24 Bit Volume Control24/192 Asynchronous USB2.0Analog Input5 Asynchronous Digital InputsHigh Current Headphone Output DriverRemote ControlAvailable in Black or Silver FaceplateMAC USB 2.0 compatibility and custom Windows USB 2.0 driverSpecs:Digital Section24bit Data at 192KS/s: AES XLR, SPDIF BNC/RCA, TOSLINK, USBMaster Clock jitter: 70 femtoseconds RMS, 100Hz-1MHzAnalog 24/192 DAC SectionMaximum Output: 4.4Vrms balanced XLR, 2.2Vrms RCAOutput Impedance: 200 ohms balanced XLR, 100 ohms RCAFrequency Response: 20 Hz-20 KHz, +/- 0.5dBTHD+N: <0.0015%, 4Vrms balanced out, 1KHzOutput Noise: 3.3uVrms A-weighted 20Hz-20KHzDynamic Range: 124dB A-weighted 20Hz-20KHzAnalog 24/192 ADC SectionMaximum Output: 2.5 Vrms RCAInput Impedance: 12K ohms RCATHD+N: 0.003%, 2.5Vrms in, 1KHzDynamic Range: 110dB, A-weighted 20Hz-20KHzHeadphone SectionHeadphone Output Current and Voltage Level: 300mA peak at 4VrmsMaximum Output: 138mWTHD+N: 0.01% 35mW, 1KHzOutput Noise: 17uVrms, A-weighted 20Hz-20KHzGeneralPower Usage On: 7WPower Usage Off: 0.0WPower Requirement: 100-120VAC, 220-240VAC 50/60 HzDimensions: 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm)Weight: 14lbs. (6.5 kg) Check out all my items on the audiolab-outletBe sure to add me to your favorites list! PLEASE READ OUR POLICIES BELOW Payments:Payments must be made within 3 days of the sale of an item. Failure to pay within 3 days may result in cancellation of the sale OR an unpaid item case opened through eBay. IF YOU HAVE QUESTIONS, PLEASE MESSAGE US BEFORE BIDDING OR PURCHASING AN ITEM. Shipping:Shipping is to the confirmed address and will not be changed after the auction has ended. *** At this time we are NOT processing any shipments internationally or outside of the Lower Contiguous 48 States. AK & HI customers please inquire if you are interested in an item listed. Additional shipping may be required to process your order. We are also unable to ship our items to PO BOXES or APO/FPO addresses unless the item is small. Please inquire if you have any of these types of addresses *** Returns:ALL RETURNS MUST HAVE A RMA# FOR RETURN PROCESSING - Please contact us to obtain an RMA # We will accept items for return with 30 days of sale. Customers wishing to return product for any reasons other than the item being defective will be subject to paying for the cost of return shipping and a restocking fee. IN THE EVENT OF DAMAGE OR THE ITEM NOT AS DESCRIBED:Please contact us directly before opening any case or return request. We want to do everything in our power to offer the best Customer Service possible.