Up for sale is a new old stock Bel Canto Ref 500S. This unit is in pristine condition with maybe 15-20 hours of use.

BEL CANTO REF 500S stereo amp.DOES NOT WORK - only buzzing sound from the 2 channels and the power indicator LED does not light up.SOLD FOR PARTS ONLY. I do not know what is wrong with it and I do not know how much it would cost to repair.The body is in good condition, little dent on bottom right of faceplate and some wear and scratches. The 2 boards imprinted ICE 125ASX2

Up for sale is a new old stock Bel Canto Ref 500S. This unit is in pristine condition with maybe 15-20 hours of use.

Up for sale is a new old stock Bel Canto Ref 500S. This unit is in pristine condition with maybe 15-20 hours of use.

Bel canto ref500s power amplifier With matching Bel canto Dac 2.5 Excellent condition Some miner marks around Nothing noticeable or can take in pics Still looks great And perfeclty working Comes with power cables and remote control Unfortunately no boxes so collection prefer Or can deliver personally for fuel cost Or will pack and post if required No time wasters please Thanks for looking

Bel Canto e.One REF500S Stereo Amplifier in BlackSTORE DEMO / FULL WARRANTYThe REF500S stereo amplifier has incredible power per square inch with two independent mono boards in a single chassis. Independent power supplies and isolated input signal filter technology reduces high power amplifier energy for a cleaner, transparent power.The Bel Canto Impedance Optimized Input Stage is a balanced high Common Mode Rejection, low output impedance driver that is critical to the amplifiers performance, ensuring that the refined dynamic qualities of the recording are preserved. WBT NextGen Speaker Connectors The WBT NextGen connectors provide the best possible connection from the amplifier to the speaker cables. We choose them because they impart minimal sonic signature to the sound, remaining open and grain-free up throughout the audio frequency band.Features:Maximum Power Output: 500W 4 ohms, 250W 8 ohms per channelPower Output 1% THD: 400W 4 ohms, 200W 8 ohms per channelMinimum Load: 2 ohms per channelPeak Output Current: 35 amperes per channelFrequency Response: +/-3 dB 1.5Hz-70KHz, all loadsTHD+N: 0.003% 1W, 1KHz, 4 ohmsIMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohmsOutput noise: 35uVRMS A-weighted 10Hz-20KHzVoltage gain: 27dB (single ended or balanced input)Damping factor: >1000Output Impedance at 100Hz:Dynamic Range: 121dBInput Voltage for Max Output: 2VrmsInput connections: Single-ended RCA or balanced XLRRCA input impedance: 100KohmsBalanced input impedance: 200KohmsOutput connections: 2-sets WBT Nextgen 5-way binding postsPower On usage: 19WPower Off usage: 0.0WInternally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 HzSize: 8.5 x 3.5 x 12[inches], 216 x 88 x 305[mm] (WxHxD)Weight: 15 lbs, 7 Kg Check out all my items on the audiolab-outletBe sure to add me to your favorites list! PLEASE READ OUR POLICIES BELOW Payments:Payments must be made within 3 days of the sale of an item. Failure to pay within 3 days may result in cancellation of the sale OR an unpaid item case opened through eBay. IF YOU HAVE QUESTIONS, PLEASE MESSAGE US BEFORE BIDDING OR PURCHASING AN ITEM. Shipping:Shipping is to the confirmed address and will not be changed after the auction has ended. *** At this time we are NOT processing any shipments internationally or outside of the Lower Contiguous 48 States. AK & HI customers please inquire if you are interested in an item listed. Additional shipping may be required to process your order. We are also unable to ship our items to PO BOXES or APO/FPO addresses unless the item is small. Please inquire if you have any of these types of addresses *** Returns:ALL RETURNS MUST HAVE A RMA# FOR RETURN PROCESSING - Please contact us to obtain an RMA # We will accept items for return with 30 days of sale. Customers wishing to return product for any reasons other than the item being defective will be subject to paying for the cost of return shipping and a restocking fee. IN THE EVENT OF DAMAGE OR THE ITEM NOT AS DESCRIBED:Please contact us directly before opening any case or return request. We want to do everything in our power to offer the best Customer Service possible.

Used sparingly as a demo unit. Features: Maximum Power Output: 500W 4 ohms, 250W 8 ohms per channel Power Output 1% THD: 400W 4 ohms, 200W 8 ohms per channel Minimum Load: 2 ohms per channel Peak Output Current: 35 amperes per channel Frequency Response: +/-3 dB 1.5Hz-70KHz, all loads THD+N: 0.003% 1W, 1KHz, 4 ohms IMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohms Output noise: 35uVRMS A-weighted 10Hz-20KHz Voltage gain: 27dB (single ended or balanced input) Damping factor: >1000 Output Impedance at 100Hz: Dynamic Range: 121dB Input Voltage for Max Output: 2Vrms Input connections: Single-ended RCA or balanced XLR RCA input impedance: 100Kohms Balanced input impedance: 200Kohms Output connections: 2-sets WBT Nextgen 5-way binding posts Power On usage: 19W Power Off usage: 0.0W Internally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 Hz Size: 8.5 x 3.5 x 12[inches], 216 x 88 x 305[mm] (WxHxD) Weight: 15 lbs, 7 Kg

For sale is a Bel Canto Ref 500S amplifier, perfect for any home audio setup. This high-quality amplifier is the ideal addition to any music lover's collection. With impressive power and clarity, this amplifier is sure to deliver a top-notch audio experience. The Bel Canto Ref 500S is a reliable and durable piece of equipment that will provide years of enjoyment. Don't miss out on this great opportunity to enhance your audio system.

Bel Canto e.One REF500S Stereo Amplifier in SilverSTORE DEMO / FULL WARRANTYThe REF500S stereo amplifier has incredible power per square inch with two independent mono boards in a single chassis. Independent power supplies and isolated input signal filter technology reduces high power amplifier energy for a cleaner, transparent power.The Bel Canto Impedance Optimized Input Stage is a balanced high Common Mode Rejection, low output impedance driver that is critical to the amplifiers performance, ensuring that the refined dynamic qualities of the recording are preserved. WBT NextGen Speaker Connectors The WBT NextGen connectors provide the best possible connection from the amplifier to the speaker cables. We choose them because they impart minimal sonic signature to the sound, remaining open and grain-free up throughout the audio frequency band.Features:Maximum Power Output: 500W 4 ohms, 250W 8 ohms per channelPower Output 1% THD: 400W 4 ohms, 200W 8 ohms per channelMinimum Load: 2 ohms per channelPeak Output Current: 35 amperes per channelFrequency Response: +/-3 dB 1.5Hz-70KHz, all loadsTHD+N: 0.003% 1W, 1KHz, 4 ohmsIMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohmsOutput noise: 35uVRMS A-weighted 10Hz-20KHzVoltage gain: 27dB (single ended or balanced input)Damping factor: >1000Output Impedance at 100Hz:Dynamic Range: 121dBInput Voltage for Max Output: 2VrmsInput connections: Single-ended RCA or balanced XLRRCA input impedance: 100KohmsBalanced input impedance: 200KohmsOutput connections: 2-sets WBT Nextgen 5-way binding postsPower On usage: 19WPower Off usage: 0.0WInternally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 HzSize: 8.5 x 3.5 x 12[inches], 216 x 88 x 305[mm] (WxHxD)Weight: 15 lbs, 7 Kg Check out all my items on the audiolab-outletBe sure to add me to your favorites list! PLEASE READ OUR POLICIES BELOW Payments:Payments must be made within 3 days of the sale of an item. Failure to pay within 3 days may result in cancellation of the sale OR an unpaid item case opened through eBay. IF YOU HAVE QUESTIONS, PLEASE MESSAGE US BEFORE BIDDING OR PURCHASING AN ITEM. Shipping:Shipping is to the confirmed address and will not be changed after the auction has ended. *** At this time we are NOT processing any shipments internationally or outside of the Lower Contiguous 48 States. AK & HI customers please inquire if you are interested in an item listed. Additional shipping may be required to process your order. We are also unable to ship our items to PO BOXES or APO/FPO addresses unless the item is small. Please inquire if you have any of these types of addresses *** Returns:ALL RETURNS MUST HAVE A RMA# FOR RETURN PROCESSING - Please contact us to obtain an RMA # We will accept items for return with 30 days of sale. Customers wishing to return product for any reasons other than the item being defective will be subject to paying for the cost of return shipping and a restocking fee. IN THE EVENT OF DAMAGE OR THE ITEM NOT AS DESCRIBED:Please contact us directly before opening any case or return request. We want to do everything in our power to offer the best Customer Service possible.

Up for sale is a pair of Bel Canto Ref 500 mono block amplifiers. I was using them to drive my Magnepan speakers. I have started to upgrade my system and I no longer have a need for these amplifiers. The condition is a 9 out of 10 they sound amazing. Also, for sale on US audio Mart