Condition of Item Used Payment We support a variety of payment methods. Shipping Economy Shipping(about 4 Weeks) Standard Shipping(about 2-3 Weeks) Expedited Shipping(about 1Week) Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Special Attention - Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Beautiful and awesome sounding B&O Beolab 2 active subwoofer. Used in home theater and it made watching movies a joy with natural, powerful sound. Heavy cast aluminum housing. This was bought in Europe and professionally converted to 110V by local B&O dealer and run for a few years in the US without the slightest problems. Ill provide the power cord and a Powerlink cable with it (see pictures). Produced 2001-2010, 850W. The BeoLab 2 was an active device; it contained its own power amplifier and low-pass crossover system. The flexibility of this arrangement allowed the point at which the BeoLab 2 ceased to reproduce sound and “hand over” the task to the main loudspeakers in the system to be made variable. This in turn made for easy adaptation to the other loudspeakers in the system, whichever models they may be. In the simplest of terms, the ideal subwoofer would be constructed using a very large rigid wooden box housing the biggest possible drive unit. Such devices are seldom domestically acceptable however and did not meet B&O’s other requirements, so the BeoLab 2 used interesting technology to overcome the fundamental drawbacks of its small size. Though only 9” in diameter, the woofer, whose cone was exposed, had a long throw and was capable of large excursions without damage. To protect the delicate cone, a flat panel was fixed across its front, which not only kept the sensitive parts of the driver out of reach but also tidied up the overall appearance of the unit. To make best use of the energy provided by this single driver, two passive radiators were fitted, one on each side of the cabinet. Although generally a bad idea in full range loudspeakers, these devices proved ideal for a subwoofer and effectively expanded the cone area of the main woofer, something that would have been lacking otherwise. The passive radiators were of the same diameter as the woofer and by mounting them on the cabinet sides a very compact assembly was realized. The cabinet itself was of cast aluminum, not a material that usually springs to mind when discussing subwoofers but an ideal choice for producing a small, rigid assembly. The corners were pleasingly rounded, giving a neat, modern appearance. Connection to the host system was easy, a single Powerlink from the main system sent all the sound to the BeoLab 2, whose internal filters processed the sound and sent whatever the subwoofer couldn’t handle to the remaining two loudspeakers through two output sockets. The internal woofer was driven by its own amplifier, rated at a peak output of 850W. This was a very large figure for a domestic loudspeaker.

Beolab 2 - Original Owner - US Version 110 volts - includes power cable

This is a listing for Bang & Olufsen Beosound 2500 with Beolab 2500 Speakers and Beolink 1000 Remote. The sound is absolutely stunning and the unit is fairly clean, please see pics in close proximity and ask for more should you need to. The unit is 100% functional with CD playing without any skips or problems, tape deck works flawlessly with all functions like RWD, FWD, PLAY, etc. The Beolab 2500 Fabric Grill Covers can be changed to 5 different colors that I have; Silver, Black, Red, Dark Red and Orange. BUYER IS REQUESTED TO INFORM GRILL COLOR OF CHOICE. ONLY ONE SET OF GRILL COVER IS INCLUDED. The Glass Door opens with wave and closes on its own . The Door is free of any cosmetic flaws such as scratches or corner chips. It comes with Rabbit Antenna that is hard to find. FREE DOMESTIC SHIPPING IN US CONTINENT EXCEPT ALASKA, HAWAII, PUERTO RICO & US VIRGIN TERRITORIES. ABSOLUTELY NO GLOBAL SHIPPING. Buy it with confidence based on my rating and feedback. SEE PICS IN CLOSE PROXIMITY. Email me with any questions. Regards, Imran.

Verkauft wird der Bang & Olufsen Centerlautsprecher BeoLab 10. Der Lautsprecher wird per Beolink eingeschaltet und braucht deshalb ein 5-Volt-Triggersignal. Entsprechende Lösungen, um den Lautsprecher mit Nicht-B&O-Geräten zu verbinden, gibt es hier bei ebay. Gerät funktioniert selbstverständlich. Der abgebildete Fernseher UND die beiden Lautsprecher BeoLab 3 dienen nur als Beispiel und sind NICHT Bestandteil dieser Auktion. Der Fernseher wird in einer anderen Auktion angeboten. Original Wandhalterung ist selbstverständlich dabei. Viel Spaß beim Bieten.

Biete hier 10 Stück Spikes bzw. Teppich-Füße für B&O Lautsprecher Beolab 8000. Die Spikes sind in einem guten Zustand. Schaut Euch einfach mal die Fotos an. Kostenloser Versand als unversicherter Prio-Großbrief. Auf Wunsch Versand als versichertes Hermes-Päckchen mit Sendungsverfolgung,Aufpreis von 1,80€ zahlt der Käufer/in. Versand nur innerhalb von Deutschland ohne Inseln. Privatverkauf, keine Garantie, Sachmängelgewährleistung oder Rücknahme nach EU-RechtGerichtsstand ist Köln Der Verkauf erfolgt unter Ausschluss jeglicher Sachmängelhaftung Die Haftung auf Schadenersatz wegen Verletzungen von Gesundheit, Körper oder Leben und grob fahrlässiger und/oder vorsätzlicher Verletzungen meiner Pflichten als Verkäufer bleibt davon unberührt

BEOLAB TERMINAL was released in 1980-1985 for the 8000 System series of components. Fully tested and working. See Video for all Three IR LEDs firing brightly. Comes with new battery installed. The unit was cleaned, terminals cleaned and treated with DeoxIT Fader Lube to inhibit future corrosion All lettering and general cosmetic condition appears good and clear - Note it is a used item from the early 1980s so see the pictures and video, judge for yourself and form your own opinion on cosmetics. Pictures are part of the description so view them fully and carefully. Please see my posititve feedback on my B&O remotes, several from repeat (even a three-pete!) buyers

Beolab 6000 caps UK delivery included • worldwide delivery available • 30-day returns • before and after sales enquiries: 07753 241443 Beolab 6000 and 6002 aluminium speaker caps, pair Part numbers Part number: 3458854, 3459106 Supply--> Compatibility Aluminium/silver colour Compatible with all Beolab 6000 and 6002 models Condition Excellent condition, with small amounts of very light marking to the top and side surfaces, of which an example is just about visible in the photographs. Postage The parts will be very carefully packed, boxed, and sent by recorded post. Postage refunds will be given wherever possible with the purchase of multiple items. Worldwide courier delivery is available: the price shown applies for Europe only, and delivery further afield may attract a supplement. Enquire before purchase for further details.

Original Bang & Olufsen Deckenhalterung (Paar) für Beolab 14 in weiß.Die Halter sind nie zum Einsatz gekommen. Käufer übernimmt Versandkosten Dieses ist eine Privatauktion keine Garantie und Rücknahme der Ware. Die Versandkosten variieren je nach Land und Region, bitte vorher erfragen. Die Versandkosten für das Ausland werden entsprechend angepaßt

Hello - All of my items are 100% genuine and authentic. - Former B&O employee & product specialist. - Returns Accepted. - Quick Dispatch or local delivery. Welcome to my ebay listing for the following item: Item: Bang and Olufsen B&O Beo 4 Remote Control SAT Beovision Beosound Beolab Type no/Mk: SAT Version Item comes supplied with 3 x AAA New Batteries Condition: Very good condition - slight signs of use - GO button faded - Item fully tested, cleaned and parts replaced with new where required Additional Information: As a former Bang and Olufsen employee of many years I am pleased to bring a selection of B&O New and Used products to the Lake District in Cumbria. I can personally guarantee that all my items are genuine and in great condition. Please do not hesitate to ask me any questions, regarding my items or if you would like any more info or photos. Payment methods accepted:All payment methods accepted What I expect from you: Good honest ebayers, no time wasters please. What you can expect from me: Honest reliable descriptions and pictures. - Immediate dispatch once the winning bid has been confirmed. - Each item packaged safely & securely. - Quick response to any questions or queries regarding any of my items. - A choice of either insurance or recorded delivery on expensive items. - Prompt in leaving honest and fair feedback.

Verkaufe meinen Beolab 10 Lautsprecher. Hatte ihn an meinen Beovision 7 montiert. Die zugehörige Halterung ist dabei. An der linken Ecke gibt es eine kleine Delle, siehe Foto.

BEOLAB TERMINAL was released in 1980-1985 for the 8000 System series of components. Fully tested and working. See Video for all Three IR LEDs firing brightly. Comes with new battery installed. The unit was cleaned, terminals cleaned and treated with DeoxIT Fader Lube to inhibit future corrosion All lettering and general cosmetic condition appears good and clear - Note it is a used item from the early 1980s so see the pictures and video, judge for yourself and form your own opinion on cosmetics. Pictures are part of the description so view them fully and carefully.

We bought this unit new from B&O with a BeoVision 7-32 TV. A few years ago the TV was replaced by a LG unit. I wanted to keep the speaker so purchased a kit from SoundsHeavenly (link below) this allows for use of the speaker from anything with a 3.5mm MiniJack. This worked perfectly with the TV and will with anything else with a minijack. The mounting plate for the B&O stand is still attached to the speaker. If needed I also have the mount that attaches to the stand. Im selling due to changing to a Sonos Beam, for the added Sonos integration. Any questions welcome. This unit is heavy at around 10kg. I am happy to package as best as I can, but pickup would be preferable. Unit Information: https://beo.zone/en/beolab-71/ 3.5mm Minijack information: https://soundsheavenly.com/line-in-connection/102-438-minijack-to-beolab-2-7-10-28-and-2500-powered-trigger-kit.html#/2-length-1m

Selling a pair of BeoLab 4000, in very good condition with a couple of tiny scuffs around the edges closeup. Otherwise not noticeable. Local delivery within London is possible. Send message with postcode.

BeoViosion 10 with 2 off BeoLab 6000 speakers. All items are wall mounted with brackets supplied as seen in the photos .all items are in excellent condition . Beo 4 remote also supplied as well as tv manual. COLLECTION ONLY.

Untitled Document Number 1 specialist of Bang & Olufsen products and cabling solutions on eBay since 2006. Offering a broad range of high quality, professionally manufactured products ranging from complete audio/video systems to cables for connecting all of the products together... AV Solutions Store | Home Page | Please Click HERE Quality BeoLab Speaker Cable for Bang & Olufsen B&O PowerLink Mk3High Quality PowerLink Speaker Cable(1 Metre)No Reserve Price Very high quality PowerLink speaker cable for superior performance that only your B&O products deserve. PowerLink Mk3 cables allows connection of Bang & Olufsen music and video systems with PowerLink socket connections. Our cables will work with current and past systems to include the following loudspeakers: BeoLab 1 | BeoLab 2 (Subwoofer) | BeoLab 3 | BeoLab 4 | BeoLab 7.1 | BeoLab 7.2 | BeoLab 7.4 | BeoLab 7.6 | BeoLab 9 | BeoLab 10 | BeoLab 11 (Subwoofer) | BeoLab 2500 | BeoLab 4000 | BeoLab 6000 | BeoLab 6002 | BeoLab 8000 | BeoLab 8002 These cables are NOT compatible with BeoLab 5, BeoLink Passive (Link room system) or the older MCL2P (Link system). Please also note that our range of cables can be used with BeoLab loudspeakers that have displays, although the displays themselves will not function. Should you wish to check the compatibility with your system, please contact us by clicking HERE PLEASE NOTEThese cables should not be confused with cheap, inferior cables designed for use with anything other than Bang & Olufsen. To ensure the safety and full enjoyment of your Bang & Olufsen products, only cables to Bang & Olufsen specification should be used. Using cables that are not to the correct PowerLink specification could cause damage to your products and void any warranty in place. Last but certainly not least, inferior cables will never provide the true audio quality sound that your Bang & Olufsen products are designed to reproduce. Why compromise on sound quality with cheaper cables... Manufactured from quality connectors and very high quality oxygen free quad/stranded/shielded copper conductor (OFC) cable for impedance matched superior sound transfer and power handling between the amplifier and loudspeakers. These cables should not be confused with cheaper alternatives available on the market. We also have different high quality versions of these cables available together with PowerLink cables for BeoLab active loudspeakers with displays (e.g. BeoLab Penta 3). If you have any questions, please just ask by sending us a message using the contact seller option. Bang & Olufsen Installers Are you a B&O installer and wish to order multiple quantities? If so, please send us a message for a discounted price. Length Options We have these available in various lengths as Buy It Now. Need A Custom Length? Please send us a message for a quote. Happy Bidding & Good Luck... Technical Information Bang & Olufsen specification8-Pin DIN Plug to 8-Pin DIN Plug (HQ OFC Quad Shielded)Very High Quality, Low Loss Screened Copper Cable (with individual screening for high performance audio transfer)Small cable diameter of just 4 mm for greater flexibility of placement and installationAuto switch on/off signal and voltage referencing SPECIFICATION & INFORMATIONType: Mk3Length: 1 MetreColour (Cable): BlackSHIPPINGFAST & FREE Standard UK Delivery | FAST Worldwide DeliveryPAYMENTS Payment via eBay checkout which includes various payment methods - PayPal, credit & debit cards etc. Copyright © AV Solutions 2023

Untitled Document Number 1 specialist of Bang & Olufsen products and cabling solutions on eBay since 2006. Offering a broad range of high quality, professionally manufactured products ranging from complete audio/video systems to cables for connecting all of the products together... AV Solutions Store | Home Page | Please Click HERE Quality BeoLab Speaker Cable for Bang & Olufsen B&O PowerLink Mk3High Quality PowerLink Speaker Cable(1 Metre)No Reserve Price Very high quality PowerLink speaker cable for superior performance that only your B&O products deserve. PowerLink Mk3 cables allows connection of Bang & Olufsen music and video systems with PowerLink socket connections. Our cables will work with current and past systems to include the following loudspeakers: BeoLab 1 | BeoLab 2 (Subwoofer) | BeoLab 3 | BeoLab 4 | BeoLab 7.1 | BeoLab 7.2 | BeoLab 7.4 | BeoLab 7.6 | BeoLab 9 | BeoLab 10 | BeoLab 11 (Subwoofer) | BeoLab 2500 | BeoLab 4000 | BeoLab 6000 | BeoLab 6002 | BeoLab 8000 | BeoLab 8002 These cables are NOT compatible with BeoLab 5, BeoLink Passive (Link room system) or the older MCL2P (Link system). Please also note that our range of cables can be used with BeoLab loudspeakers that have displays, although the displays themselves will not function. Should you wish to check the compatibility with your system, please contact us by clicking HERE PLEASE NOTEThese cables should not be confused with cheap, inferior cables designed for use with anything other than Bang & Olufsen. To ensure the safety and full enjoyment of your Bang & Olufsen products, only cables to Bang & Olufsen specification should be used. Using cables that are not to the correct PowerLink specification could cause damage to your products and void any warranty in place. Last but certainly not least, inferior cables will never provide the true audio quality sound that your Bang & Olufsen products are designed to reproduce. Why compromise on sound quality with cheaper cables... Manufactured from quality connectors and very high quality oxygen free quad/stranded/shielded copper conductor (OFC) cable for impedance matched superior sound transfer and power handling between the amplifier and loudspeakers. These cables should not be confused with cheaper alternatives available on the market. We also have different high quality versions of these cables available together with PowerLink cables for BeoLab active loudspeakers with displays (e.g. BeoLab Penta 3). If you have any questions, please just ask by sending us a message using the contact seller option. Bang & Olufsen Installers Are you a B&O installer and wish to order multiple quantities? If so, please send us a message for a discounted price. Length Options We have these available in various lengths as Buy It Now. Need A Custom Length? Please send us a message for a quote. Happy Bidding & Good Luck... Technical Information Bang & Olufsen specification8-Pin DIN Plug to 8-Pin DIN Plug (HQ OFC Quad Shielded)Very High Quality, Low Loss Screened Copper Cable (with individual screening for high performance audio transfer)Small cable diameter of just 4 mm for greater flexibility of placement and installationAuto switch on/off signal and voltage referencing SPECIFICATION & INFORMATIONType: Mk3Length: 1 MetreColour (Cable): BlackSHIPPINGFAST & FREE Standard UK Delivery | FAST Worldwide DeliveryPAYMENTS Payment via eBay checkout which includes various payment methods - PayPal, credit & debit cards etc. Copyright © AV Solutions 2023

BeoViosion 10 with 2 off BeoLab 6000 speakers. All items are wall mounted with brackets supplied as seen in the photos .all items are in excellent condition . Beo 4 remote also supplied as well as tv manual. COLLECTION ONLY.

We ship equipments WORLDWIDE, please ask about shipping cost to your country before purchase. Wir versenden Geräte WELTWEIT, bitte erkundigen Sie sich vor dem Kauf nach den Versandkosten in Ihr Land. Bang & Olufsen B&O Beolab 7-1 Type 6210 Technische daten: Cabinet finishAluminium cabinet coated with hardwearing black soft-touch lacquer. Speaker grille in natural coloured anodised aluminium Power consumption IEC65: 36 wattTypical: 20 WStand-by: 0.2 WPower amplifiers (per channel) 3 x 125 watts, Class D, ICEpowerÒLong-term maximum output powerper amplifier Bass: 120 watts/8 ohmMidrange: 120 watts/8 ohmTreble: 120 watts/8ohmEffective Frequency range 37 - 20.000 HzCrossover frequencies 250 Hz and 4.000 HzCabinet principle Bass: Bass reflexMidrange/Treble: Closed boxNet volume, bass 4.2 litres (per side)Net volume, midrange 0.8 litres (per side)Magnetically shielded NoWoofer 101,6 mmMidrange 76,2 mmTweeter 19 mm Input sensitivity (Power Link) 88dB @ 125 mV SPLIndicator (for service use only) 1 tri-colour LED. Green for On, Red for Off, Orange for Protection modeOperation Free or Wall positionProtection Thermal protection Connections:Power Link 1 (Semi-Balanced PL cable type MK III, or fully mounted PL cable required)Mains 1 input, 1 output (not US version) Market specifications:Type Market Voltage6210 Australia, Austria, Bahrain, Belgium, ChinaCroatia, Czech Repub., Denmark, Egypt, Finland, France, Germany, Greece, Holland, Hong Kong, Hungary, Indonesia, Israel, Italy, Kuwait, Lebanon, Malaysia, Morocco, Norway, Oman, Poland, Portugal, Qatar, Russia, Saudi Arabia, Singapore, Slovak Rep., Slovenia, South Africa, Spain, Sweden, Switzerland, Thailand, Turkey, United Arab Emirates, United Kingdom220 - 240V6212 USA, Canada, Mexico, Taiwan 100 - 120 V Den äußeren Zustand entnehmen Sie bitte den Fotos. Der technische Zustand ist einwandfrei. Excellent working condition. Für alle Fragen stehe ich unter e-mail zur Verfügung Korrespondenzsprache (die bevorzugte Sprache): English, Deutsch Shipping all over the world. Versand überall in der Welt. Der Kost und Art und Weise des Versands hängt von dem Zielort ab (der Versandspreis wird in der e-mail gegeben). Vorgehensweise beim Paketemfang vom KurierJede Sendung ist versichert.Beim Paketemfang wird der Käufer zu Überprüfung verpflichtet, ob die Sendung komplett ist und hat keine Schäden, die infolge von Beförderung entstanden werden. In Gegenwart des Kuriers sollte man das Paket öffnen und überprüfen, ob der Inhalt auftragsgemäß und in unversehrtem Zustand ist.Wenn der Inhalt nicht auftragsgemäß ist oder beschädigt ist, sollte man möglichst genau das Vertragwidrigkeit und die Beschädigung in der Schadensanzeige beschreiben. Achtung: das Datum und die Uhrzeit der Niederschrift und der Anmeldung der Schäden muss man genauso wie das Datum und die Uhrzeit des Paketemfanges am Frachtbrief sein. Die Schadensanzeige sollte man sowohl vom Kurier als auch vom Empfänger unterschieben werden. Danach sollten Sie sich sofort zu uns anmelden um die Situation zu beschreiben und die Lösung des Problemes vorzuschlagen. Wenn das Datum des Paketemfanges anders als das Lieferdatum ist oder der Protokoll falsch ausgefüllt wird, werden von uns die Reklamationen nicht stattgegeben und dann sollte man sie direkt mit dem Kurierdienst erledigen. WiderrufsrechtSie können Ihre Vertragserklärung innerhalb von 14 Tagen ohne Angabe von Gründen in Textform (z. B. Brief, E-Mail) oder – wenn Ihnen die Sache vor Fristablauf überlassen wird – auch durch Rücksendung der Sache widerrufen. Die Frist beginnt nach Erhalt dieser Belehrung in Textform, jedoch nicht vor Eingang der Ware beim Empfänger (bei der wiederkehrenden Lieferung gleichartiger Waren nicht vor Eingang der ersten Teillieferung) und auch nicht vor Erfüllung unserer Informationspflichten gemäß Artikel 246 § 2 in Verbindung mit § 1 Absatz. 1 und 2 EGBGB sowie unserer Pflichten gemäß § 312g Absatz. 1 Satz 1 BGB in Verbindung mit Artikel 246 § 3 EGBGB. Zur Wahrung der Widerrufsfrist genügt die rechtzeitige Absendung des Widerrufs oder der Sache.Der Widerruf ist zu richten an:Audioul.Sienkiewicza 8a50-335 WroclawPoland PROCEDURE FOR RECEPTION OF COURIER PACKAGESEvery package is insured.When receive the merchandise, BUYER IS OBLIGED to check whether the merchandise is complete and has not been damaged during transportation. In the presence of the courier buyer should open and check the contents of package in respect of compliance with the order and inviolate content. If the content is not compatible with the order or is damaged, the exact nature of damage or inconsistency should be specified in the protocol.NOTE: The date and time of reporting damage and writing the protocol report must be the same as the date and time of package reception from the waybill. The protocol must be signed by the recipient and courier. Then, report the damage of the package to us describing whole incident and propose how would you like to solve the problem. If the date of receipt of the goods will be different from the date of delivery or the damage protocol is inexact complaint will not be considered by us and should be solved directly with with courier company which delivered the package.

Selling a pair of BeoLab 4000, in very good condition with a couple of tiny scuffs around the edges closeup. Otherwise not noticeable