Bang & Olufsen Beocenter 9300 Centre control panel 42 Module 8002750 For Beocenter 9300 only, as it lacks the level switch for earlier models. Parts available are Rev. F and g Postage The part will be carefully packed, boxed, and sent promptly by recorded post. Returns and worldwide postage are available.

Bang & Olufsen Beocenter 9300 Module 62 Rectifiers Part number:8001619 Board number: 8002731H Power supply rectifier module including bracket for Beocenter 9300 models only. In tested, working condition. Generic image shown, but the same part. Postage The part will be carefully packed and sent by recorded post, with worldwide delivery available.

Beocenter 9500 8002740 UK delivery and 30-day returns included • worldwide delivery available • before and after sales enquiries: 07753 241443 Beocenter 9000 and 9500 Upper display panel PCBs Part numbers Modules: 44, 45, 46 Part numbers: 8002738, 8002740, 8002736 Supply--> Compatibility Compatible with type 25xx Beocenters: Beocenter 9000 Beocenter 9500 Beocenter 8000 Beocenter 8500 Untested on a Beocenter 9300, but should work despite the extra lamp positions of the earlier boards Condition In tested, working condition Postage The parts will be very carefully packed in ESD-safe bags, boxed, and sent by recorded post. Postage discounts are available wherever possible if purchasing multiple items. Combined postage and international delivery is available wherever possible.

Obseclec.com • 07753 241443 • Obscure Eclectics Parts UK delivery and 30-day returns included • worldwide delivery available • before and after sales enquiries: 07753 241443 Beocenter 9000/9500 Rectifier module Part numbers Part number: 8002731 Board number: 8002731G Module number: 62 Compatibility Becenter 9500 and 8500 Also compatible with the Beocenter 9000, but will have a spare socket position for the lack of transceiver Not compatible with Beocenter 9300 Condition The part is in tested, working condition; all four electrolytic capacitors have been replaced in the last 18 months: due to the fit of the original parts extra wires have been added to the negative terminals. Fit is good and, again, the part is working. Postage The part will be carefully packed in an ESD-safe bag, boxed, and sent by recorded post. Postage discounts are available wherever possible if purchasing multiple items. Worldwide courier delivery is available: the price shown applies to Europe only, and delivery further afield may attract a supplement. Enquire before purchase for further details. All items are promptly despatched, and carefully packed using a minimum of plastic packaging. See how we package parts-->

Obseclec.com • 07753 241443 • Obscure Eclectics Parts UK delivery and 30-day returns included • worldwide delivery available • before and after sales enquiries: 07753 241443 BeoLab 4 Filter module Part numbers Module number: PCB 3 Part number: 8002621 Board number: 6471B-50 Compatibility Fits BeoLab 4 and 4 PC Models Condition In fully tested, working condition Postage The part will be carefully packed and boxed, ready for despatch by recorded post. Worldwide delivery is available: the price shown applies to Europe only, and delivery further afield may attract a supplement. Enquire before purchase for further details. All items are promptly despatched, and carefully packed using a minimum of plastic packaging. See how we package parts-->

Bang & Olufsen Aluminium lid 3162129 For various models Lower left aluminium cosmetic panel for Beomaster 6000 and Beocords 6000, 6002, 8000, 8002, 8004, and 9000 In good condition, but with a set of pitting scratches, and a few areas with rough edges – as shown in the photographs. Postage The part will be very carefully packed, and amply boxed ready for despatch by recorded post. A return and worldwide delivery are available.

One MMC4 Cartridge supplied. Main photograph shows range available - see alternative listings for stock Inspected, tested and confirmed as new condition - see imagesInterchnagable with any deck that has used an MMC 1 - 5 cartridge. Eg. Beogram RX RX2 TX TX2 1800 2000 3000 3300 3500 4500 5000 5500 5005 6500 7000 8002 9000 9500 and Beocenter 2200 7007 7700MMC means Moving Micro-Cross a superior pick up technology - see below Titanium-bonded elliptical diamond, mounted on a tapered aluminium cantilever to reduce record wear and maintain optimum surface contact providing extended and more accurate sound reproduction Effective Tip Mass of mg 0,4 B&Os best ever was just 0,25 but if you can find an MMC1 let me know too! - explanation belowBuy with confidence, over 75 new/new other condition MMC cartridge/styli sold in the last 3 years all with 100% feedbackWill fit BeoGram models: RX RX2 TX TX2 1800 2000 2404 3000 3300 3500 4500 5000 5005 5500 6002 6500 7000 8002 8500 9000 9500The QUALITRONICS DIFFERENCEMatch with:Beocenter 7007 7700 2200Beogram models listed aboveUpgrade with:MMC3 with approx 20% lighter tracking force to further protect your vinylMMC2 a real jump in development with a sapphire cantilever and elliptical diamond cutMMC1 the ultimate cartridge, precious stone rigid (sapphire tube!) and a highly refined contact line diamond profile.Most of these are available in my other listings already or I have them in stock so do have a look below, if not I can source them for you in a few days. Please message me for that serviceTESTIMONIALS Courtesy of Beoworld.org MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources. No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridge If you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.MMC4 Product Specifications Description Titanium-bonded elliptical diamond, mounted on a tapered aluminium cantilever Tracking force - grams 1.2 Diamond Stylus Elliptical Cantilever tube. Tap. alum. . Effective tip mass mg 0,4 Compliance mg/mN 25 Frequency 20-20000 Hz=/-dB 2,5 Channel separation 1000>dB 22 Output mV/cm/s RMS 0,6 Cartridge weight gram 1,6 WORLDWIDE carriage may cost more OR LESS!! than the listing states (I have to enter an estimated figure) and will be charged in full as per the service chosen and destination country. Eg, air, surface, express, economy. I ALWAYS SEND WITH QUALITY PACKAGING, TRACKING AND INSURANCE. IF IN ANY DOUBT PLEASE ASK FOR A QUOTE. I NEED YOUR FULL ADDRESS FOR THISPostage/Carriage charges:You may have noticed that these has risen lately. Insurance has almost doubled and many carriers will not accept turntables, speakers or amplifiers, meaning I have to find a specialist. Im sorry that these have to be passed onto you. Qualitronics aims to recycle packaging as much as possible but it will always be top quality and usually its double-box where appropriate too.DELIVERY TO CHINA, ISRAEL, AUSTRALASIA, INDIA, RUSSIAN FEDERATION AND SOUTH AMERICA WILL BE ROUGHLY DOUBLE THE QUOTED INTERNATIONAL PRICE. TO BID IS TO ACCEPT THIS EXTRA PAYMENT. THANKS!About Qualitronics!Im running this business part-time whilst I raise my children. My daughter Issy is 5 years old, the apple of my eye, my teacher and the beneficiary of your purchases. (She says THANK YOU VERY MUCH!) Tommy is 5-months old and his dimples charm the world. I endeavour to source the HIGHEST quality electronics, mostly B&O HiFi and will have owned most of the models in question at some time in my life. This gives me a real experience of the merits to share with you. Im a time-served Sound Engineer and use my trained ear to check each audio item. Its not just sonics though, look out for the weird and wonderful... as long as its well madePRE-SALE ENQUIRIES:Im more than happy to answer any questions, offer advice and make suggestions over the phone and many customers have already found this useful.Please call the customer service line accessed by clicking the ask a question feature or opening the full information link in the business information section below. The full number is not always displayed. Often the first zero is missing. This is ebays procedure and not mine. PRODUCTION DESIGNERS AND PROPERTIES BUYERS A number of my items have now featured in TV ads, theatre and film productions and professional photography having been bought by production designers, location agents and properties buyers. These include a Beocenter 2200, Beocenter 7007 and Beovox S45 speakers among others. I recognise the tight deadlines that you have to work to and the immediacy you often have to work under. For the speediest solution I can offer, including same or next day delivery, suitability of product or advice on matching items to an era (or decade), please use the customer service line accessed by clicking the ask a question feature or opening the full information link in the business information section below. COLLECT IN PERSON:This is actively encouraged! This way, no clumsy or disgruntled delivery person can break it! Do check in advance the location of the item youre interested in. A quick call will be all thats needed to confirm the whereabouts. Whilst the business is registered in London, I also have stock stored near Maidstone, Manchester and the Midlands. I can only accept cash on collection as the payment method if visiting the premises due to the PayPal charge back scam. INSTALLATION:I am increasingly being commissioned to complete installations of the products that I sell. Depending upon your location and items purchased this can be achieved for little more than the usual shipping and insurance costs of the selected units. You receive the assurance of a properly connected system, including optimum placement design and the benefit of a full demonstration, highlighting the tips and techniques garnered from decades of experience and expertise. Recent installations have ranged from a single Beocenter being connected to the existing speakers and unit for an 89-years young-lady for a few hundred pounds to a multi-room, Beocenter, Beogram, Beovox and B&O dedicated cabinet and stands combination, with remote control, for a few thousand pounds.Please use the ask a question feature to access the pre-sales telephone number to discuss your requirements.SOURCING SERVICE:Cant find that B&O product that youve yearned for since you were a kid? Need a rare or discontinued part to repair your unit? If I dont have it in stock, then I can normally source one very quickly. I have a wide network of fellow enthusiasts, collectors, dealerships and retired B&O Engineers whom I can call upon to fulfill your needs.FEEDBACK:Your positive feedback is vital to all good sellers. It lets us know that you are happy, if not delirious, about your purchase. On very rare occasions, there may be an issue with your order, such as courier damage or simply leaving transit screws engaged. (Quite common). I can remedy any such issues to your complete satisfaction most quickly via the telephone or eBay message (without the need to open a case). Please use the contact number shown when you select the ask a question button. I realise that you are very, very busy, only one in three of my clients has found the time to leave feedback that also informs their peers of their positive experience. Indeed all of Qualitronics feedback is from buyers and not inflated by that of other sellers. Your contribution will be greatly appreciated. INTERNATIONAL PURCHASES:Please note that Qualitronics is not responsible for any additional import tariffs or customs charges levied at source or upon delivery. It is the buyers responsibility to check before purchasing for their own countrys charges. VOLTAGE:All electrical items are UK voltage (240v) and B&O UK type xxxx unless otherwise stated. I dont like to disguise the postage and packaging costs in the item price. This shipping price includes, packing materials, insurance and first class tracking that is an unfortunate necessity due to buyer fraud. It is not even the full cost, only the Royal Mail charge. Thank you for your understanding.

NEW BOXED BANG & OLUFSEN MMC2 Stylus Cartridge for B&O Beogram 6500 8002 Beocenter 2200 7007 plus these below Inspected, tested and confirmed as new condition - see imagesInterchnagable with any deck that has used an MMC 1 - 5 cartridge. Eg. Beogram RX RX2 TX TX2 1800 2000 3000 3300 3500 4500 5000 5500 5005 6500 7000 8002 9000 9500 and Beocenter 2200 7007 7700MMC means Moving Micro-Cross a superior pick up technology - see belowMMC2 is the SAME spec as MMC1 with the absolute best profile (with the lowest ETM) being labelled as 1s. Get the same spec for hundreds less!ONLY 0.3 milligrammes tracking force that really protects your precious vinylSapphire tubular cantilever and line contact diamond to reduce record wear and maintain optimum surface contact providing extended and more accurate sound reproductionEffective Tip Mass of mg 0,3 B&Os best ever was just 0,25 but if you can find an MMC1 let me know too! - explanation belowBuy with confidence, over 75 new/new other condition MMC cartridge/styli sold in the last 3 years all with 100% feedbackWill fit BeoGram models: RX RX2 TX TX2 1800 2000 2404 3000 3300 3500 4500 5000 5005 5500 6002 6500 7000 8002 8500 9000 9500One MMC2 supplied Photo of all 5 MMC range is for illustration onlyThe tubular construction offered less weight than a solid cantilever but with immense stiffness. The diamond profile was similar to that of the MMC20CL being line contact. The way to look at these cartridges was to imagine an elliptical profile but with both the front and rear facets being scooped out. In this way the vertical contact surface was maximised and the horizontal element kept to a minimum.The MMC1 and MMC2 were essentially the same cartridge with the MMC1 using the best specified diamond tips. The MMC system was carried over from the SP series but taken to an even smaller level.MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal.Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.MMC2 SpecificationsNude multi-radial Contact Line diamond, mounted on a sapphire cantilever Tracking force - grams 1 Diamond Stylus Cont. line nude Cantilever tube Sapphire Effective tip mass mg 0,3 Compliance mg/mN 30 Frequency 20-20000 Hz=/-dB 1,5 Channel separation 1000>dB 25 Output mV/cm/s RMS 0,6 Cartridge weight gram 1,6

Bang Olufsen MMC1 Stylus Cartridge Retipped Refurbished Beogram 6500 8002 7000. PROFESSIONALLY REFURBISHED using a sapphire cantilever and contact line diamond, SECURITY MARKED, TESTED AND PHOTOGRAPHED. Tested on a Beogram 6500, 2000 and a Beocenter 2200 & 7007. Not a Soundsmith copy but the real deal. Interchangeable with any deck that has used an MMC 1 - 5 cartridge. Eg. Beogram RX RX2 TX2 2000 3000 3300 3500 4500 5000 5500 5005 6500 7000 8002 9000 9500 and Beocenter 2200 7007 7700. Display stand not included NEW BOXED BANG & OLUFSEN MMC1 Stylus Cartridge for B&O Beogram 6500 8002 Beocenter 2200 7007 plus these below WHATS BETTER THAN A 30-YEAR OLD UNUSED MMC1? A PROFESSIONALLY REFURBISHED MMC1 (OBVS!) Inspected, tested and confirmed as better than new (old stock) condition - see imagesInterchnagable with any deck that has used an MMC 1 - 5 cartridge. Eg. Beogram RX RX2 TX TX2 1800 2000 3000 3300 3500 4500 5000 5500 5005 6500 7000 8002 9000 9500 and Beocenter 2200 7007 7700MMC means Moving Micro-Cross a superior pick up technology - see belowMMC2 is the SAME spec as MMC1 with the absolute best profile (with the lowest ETM) being labelled as 1s. Get the same spec for hundreds less!ONLY 0.3 milligrammes tracking force that really protects your precious vinylSapphire tubular cantilever and line contact diamond to reduce record wear and maintain optimum surface contact providing extended and more accurate sound reproductionEffective Tip Mass of mg 0,3 B&Os best ever was just 0,25 but if you can find an MMC1 let me know too! - explanation belowBuy with confidence, over 75 new/new other condition MMC cartridge/styli sold in the last 3 years all with 100% feedbackWill fit BeoGram models: RX RX2 TX TX2 1800 2000 2404 3000 3300 3500 4500 5000 5005 5500 6002 6500 7000 8002 8500 9000 9500One MMC1 supplied Photo of all 5 MMC range is for illustration onlyMMC1 Manufactured: 1984 - 1996 Designer: Jacob Jensen Colours: Silver and Black The MMC1 was the top of the range of B&Os new cartridge range. It was only available as an upgrade - even the top of the range Beogram 8002 was only fitted with the MMC2 The MMC1 had a line contact diamond mounted on a tubular sapphire cantilever. The tubular construction offered less weight than a solid cantilever but with immense stiffness. The diamond profile was similar to that of the MMC20CL being line contact. The way to look at these cartridges was to imagine an elliptical profile but with both the front and rear facets being scooped out. In this way the vertical contact surface was maximised and the horizontal element kept to a minimum.The MMC1 and MMC2 were essentially the same cartridge with the MMC1 using the best specified diamond tips. The MMC system was carried over from the SP series but taken to an even smaller level.MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal.Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. MMC1 Product Specifications DescriptionNude multi-radial Contact Line diamond, mounted on a sapphire cantilever Tracking force - grams1 Diamond Stylus Cont. line nude Cantilever tubeSapphireEffective tip mass mg0,25 Compliance mg/mN 30 Frequency 20-20000 Hz=/-dB1 Channel separation 1000>dB30 Output mV/cm/s RMS0,6 Cartridge weight gram1,6

Bang & Olufsen BeoLab 8000/8002 Cone Chrome Silver by Beoplay Beo B&o. There is no sign of wear or scratches, like new condition

Obseclec.com • 07753 241443 • Obscure Eclectics Parts UK delivery and 30-day returns included • worldwide delivery available • before and after sales enquiries: 07753 241443 BeoSound 1 Power supply module 2 Part numbers Part number: 8006456, 8006898 Board number: 8002480 Compatibility This part is designed for the 2001-2011 Beosound 1, not its 2016 namesake. Fits all 200-240 V BeoSound 1 versions: types 2581, 2582, 2585, 2587, and 2590. Compatible with 100-130 V versions once jumper is fitted at J2: type 2583, 2584, and 2586. Condition The part is in fully tested, working condition. Postage The part has been carefully packed and boxed, ready for despatch by recorded post. Worldwide delivery is available: the price shown applies to Europe only, and delivery further afield may attract a supplement. Enquire before purchase for further details. All items are promptly despatched, and carefully packed using a minimum of plastic packaging. See how we package parts-->

Bang & Olufsen Beogram 8002 Turntable Ships Worldwide(Customs, taxes and duties may apply) Thanks for your interest in this amazing product from Bang & Olufsen. This needs to be restored as its a vintage record player with several issues. Both the aluminum surface and the metal lid doesnt stay on and need new double sided sticky tape. Turns on but table doesnt spins. No needle included, so not tested beyond just power. Actual photos, minor marks on the casing some minor tape residue. PAYMENT INFO: Payment is due immediately after the auction end. If you cannot pay immediately after the auction but want to bid please contact me and let me know when you will be able to send payment and I will let you know if you can bid. If your feedback is less than 10, please contact me before bidding just to let me know that you are a real person and not someone that is going to bid and not pay. If you do not contact me before bidding, I will try to contact you and if you do not respond then I will cancel your bids and block your user id. SHIPPING INFO I will ship this out by the next day via FedEx or USPS after the payment is received. Your tracking number will be automatically sent to you when it goes out. I always pack well and insurance is always included! INTERNATIONAL BUYERSPlease contact me for shipping quotes. You are responsible for all shipping, taxes and duties. Thanks For Looking!!

BITTE GENAU LESEN !Beogram TX inkl. MMC4-System Tangential-PlattenspielerDer Plattenspieler ist grundsätzlich funktionstüchtig. Selbst das MMC-4System klingt in meinen Augen noch gut (siehe Video, Plattenspieler ist allerdings nur an einem alten Beosystem 10 angeschlossen).Allerdings setzt die Nadel manchmal (nicht immer ?) etwas zu früh auf und der rechte Deckel über dem Tonarm ist lose und müßte neu verklebt werden (habe es schon versucht, aber es hält nicht ordentlich).Es wäre daher sicher nicht verkehrt, wenn sich der Käufer zumindest etwas damit auskennt und ggf. kleinere Korrekturen/Justierungen selber vornehmen kann. Alleine ein gebrauchtes MMC4-System wird hier schon mit über 100 Euro gehandelt.Da das Gerät sehr schwer und super empfindlich ist, würde ich eine Abholung bevorzugen. So kann sich der Käufer auch vor Ort gleich von dem Zustand des Plattenspielers überzeugen.Sollte dennoch ein Versand gewünscht werden, erfolgt dieser ausschliesslich AUF EIGNES RISIKO und in dem Fall würde ich nur die direkte Überweisung auf mein Konto, oder PayPal an Freunde akzeptieren, um späteren Ärger zu vermeiden. Selbstverständlich würde ich ihn super sicher einpacken und es auch mit Fotos dokumentieren, damit mir hinterher niemand etwas nachsagen kann.Sie können natürlich hier mitbieten um das Gerät zu ersteigern, aber die Bezahlung über eBay würde ich nicht akzeptieren und wieder stornieren, aus den zuvor angegebenen Gründen, die hoffentlich für jeden nachvollziehbar sind. Sollte er beim Transport beschädigt werden, möchte ich nicht der Leidtragende sein, der dann auf dem Schaden sitzen bleibt. Für so ein hochwertiges Gerät lohnt sich vielleicht auch mal ein kleiner Ausflug ins schöne Weserbergland ???? Optisch hat er natürlich ein paar Gebrauchsspuren (siehe original Fotos), ist aber noch absolut Wohnzimmertauglich.Abholung in der Nähe von 31785 Hameln bzw. ca. 50km südlich von Hannover !

Bang & Olufsen - B&O - BC 2 Socket Unit DAB Module - PART : PCB 37 - 8002046

Bang & Olufsen - B&O - BC 2 Socket Unit SMPS - PART : PCB 60 - 8002986

Bang & Olufsen – B&O – BeoMaster 6000 4 Ch Type 2702 PC-board PART: 116 - 8002274

Bang & Olufsen - BeoLab 8000/8002 woofers. Part Number 8480255. All woofers are original and latest design. Business Informations, Terms and Conditions, Return conditions & VAT restriction of this Offer, 1 Scope of the contract The following conditions regulate the contractual relationship between the seller Radim Válek, Zem?d?lská 90/19, 61300 Brno, CIN: 76029620 and the respective buyer on the eBay online sales platform. 2 Subject of the contract The subject of the respective contract is the sale of goods by the seller to the buyer on the eBay sales platform, in particular the sale of used hi-fi devices and accessories. These goods are offered by the seller either via their eBay shop as shop items or as general auction items. General auction items are visible both on the general eBay websites and in the seller's eBay shop. The goods offered on the general eBay websites or in the seller's eBay shop are binding offers by the seller to conclude a contract for the respective item. 3 Conclusion of contract, contract language The buyer can buy goods offered via the seller's eBay shop immediately or bid on these goods in an auction. Auction listings may also include a Buy It Now option. The goods offered in the seller's eBay shop in the Buy It Now offer format and auctions of these goods are also visible on the general eBay websites. This does not apply to the seller's items, which he intended exclusively as shop items. In the case of a buy-it-now, an effective purchase contract for a buy-it-now price (fixed price) is concluded between the buyer and seller when the buyer clicks on the Buy it now or It's now & new button and confirms the process. In an auction, a valid purchase contract is concluded with the buyer who has submitted the highest bid within the bidding period. The amount of the purchase price is based on this highest bid. If an auction offer is also provided with the Buy It Now option, an effective purchase contract for the purchase of the item is already concluded at the Buy It Now price (fixed price) regardless of the end of the offer period and without an auction being held if a buyer exercises this option . The option can be exercised by the buyer as long as no bid has been placed on the item. additionally: or the bids have not yet reached a minimum price set by the seller]. After the conclusion of the contract, the seller sends the buyer an order confirmation and information on order processing. The buyer assures that all information provided by him for the auction or purchase transaction (e.g. name, address, e-mail address, bank details, etc.) is correct. Changes must be reported to the seller immediately. Contract language is exclusively English. 4 Contract processing, shipping costs All prices are gross euro prices plus any packaging and shipping costs that may arise. The seller bears the eBay fees incurred. The shipping costs are listed in the offer. The shipping costs do not apply to products that are shipped free of charge. The purchase price can be paid in advance, eg PayPal, bank transfer (by Ebay). The purchase price can alternatively be paid by cash on delivery or personal pickup. The seller undertakes, after the conclusion of the purchase contract and full payment of the purchase price, to send the goods to the buyer immediately by post or freight forwarder. Partial deliveries are permitted as long as they are reasonable for the buyer. 5 Cancellation policy for consumers in distance contracts RIGHT OF WITHDRAWAL You have the right to withdraw from this contract within one month without giving any reason. The cancellation period is one month from the day on which you or a third party named by you who is not the carrier took possession of the goods/the last goods. In order to claim your right of withdrawal, you must send us (Radim Valek, Zemedelska 90/19, 61300 Brno) a clear declaration ( e.g. a letter or e-mail) about your decision to accept this contract revoke inform you can use the attached sample revocation form for this, but this is not mandatory. To meet the cancellation deadline, it is sufficient for you to send the communication regarding your claim of the right of cancellation before the cancellation period has expired. CONSEQUENCES OF REVOCATION If you revoke this contract, we have paid you all payments that we have received from you, including the delivery costs (with the exception of the additional costs resulting from the fact that you have chosen a different type of delivery than the cheapest standard delivery offered by us), immediately and at the latest within fourteen days from the day on which we received the notification of your cancellation of this contract. For this repayment, we use the same means of payment that you used in the original transaction, unless something else was expressly agreed with you; under no circumstances will you be charged fees for this repayment. We can refuse the repayment until we have received the goods back or until you have provided proof that You must return or hand over the goods to us immediately and in any case no later than fourteen days from the day on which you inform us of the cancellation of this contract. The deadline is met if you send back the goods before the period of fourteen days has expired. You bear the direct costs of the return of the goods. You are only liable for any diminished value of the goods resulting from the handling other than what is necessary to establish the nature, characteristics and functioning of the goods. - End of revocation - EXCLUSION OF THE RIGHT OF WITHDRAWAL The right of withdrawal does not apply to contracts for the delivery of goods that are not prefabricated and for the production of which an individual selection or determination by the consumer is decisive or which are clearly tailored to the personal needs of the consumer. Likewise, there is no right of withdrawal for contracts for the delivery of goods that can spoil quickly or whose use-by date would soon be exceeded. SPECIAL NOTES ON THE EARLY EXPIRATION OF THE RIGHT OF WITHDRAWAL In the case of contracts for the delivery of sealed goods that are not suitable for return for reasons of health protection or hygiene, your right of cancellation expires prematurely if the seal on the goods has been removed after delivery. In the case of contracts for the delivery of sound or video recordings or computer software in sealed packaging, your right of withdrawal expires prematurely if the seal has been removed after delivery. SAMPLE CANCELLATION FORM (If you want to revoke the contract, please fill out this form and send it back.) - To Radim Válek, Zem?d?lská 90/19, 61300 Brno, CIN: 76029620 : - I/we (*) hereby revoke the contract concluded by me/us (*) for the purchase of the following goods (*)/ the provision of the following service (*) - Ordered on (*)/received on (*) - Name of consumer(s) - Address of the consumer(s) - Signature of the consumer(s) (only if notified on paper) - Date _______________ (*) Delete where not applicable 6 VAT Restriction I am not a VAT payer, so if the essence of § 6 is not fulfilled, sales tax is not paid. (§ 6 The taxpayer shall be a person liable for tax based in the country, whose turnover for a maximum of 12 immediately preceding consecutive calendar months exceeds CZK 2,000,000, with the exception of a person who only carries out tax-exempt transactions without the right to tax deduction) The person liable to tax referred to in paragraph 1 is a payer from the first day of the second month following the month in which he exceeded the specified turnover, unless he becomes a payer under this Act earlier.) 7 Others The European Commission provides a platform for out-of-court online dispute resolution (the OS platform), available at https://ec.europa.eu/consumers/odr/ We are neither willing nor obliged to participate in dispute resolution proceedings before a consumer arbitration panel.

Beogram 8000 transformer removed from a unit that powered on but had problems. Cord is a little dirty but should clean up. *The shipping cost you see is for a USPS flat rate envelope. I do not charge extra for handling. Feel free to ask questions before bidding or purchasing. Sold as pictured so please see photos closely for details. * Florida residents are subject to a 7% sales tax. SOLD AS IS. * I am a small business and do my best to picture and describe items accurately, but sometimes, I make mistakes. If you purchased an item and believe that I have made a mistake, please contact me. Good communication is the best way to resolve any issue.Thank you!

Bang & Olufsen Beolab 8000 / 8002 Woofer Neu Ersatz Ersatzlautsprecher Topp !!!. Sie bieten hier auf einen Woofer passend für alle Beolab 8000 Baureihen und auch fürs Nachfolgemodell 8002 ! 4 Stck sind vorhanden und können erworben werden ! absoluter Originalverpakter Neuzustand , keine Gebrauchten !!! Oder überarbeiteten original Bang &Olufsen Ersatzteile !!!

Beogram 8000 platter. Should work on other models. Light scattered stains on the aluminum. Plastic risers are good. *The shipping cost you see is calculated based off of the items dimensions and your address. I do not charge extra for handling. Feel free to ask questions before bidding or purchasing. Sold as pictured so please see photos closely for details. * Florida residents are subject to a 7% sales tax. SOLD AS IS. * I am a small business and do my best to picture and describe items accurately, but sometimes, I make mistakes. If you purchased an item and believe that I have made a mistake, please contact me. Good communication is the best way to resolve any issue.Thank you!

Bang & Olufsen Beocenter 9300 Module 62 Rectifiers Part number:8001619 Board number: 8002731H Power supply rectifier module including bracket for Beocenter 9300 models only. In tested, working condition. Generic image shown, but the same part. Postage The part will be carefully packed and sent by recorded post, with worldwide delivery available.

Obseclec.com • 07753 241443 • Obscure Eclectics Parts UK delivery and 30-day returns included on all parts • worldwide delivery available • before and after sales enquiries: 07753 241443 Beocenter 9000 Amplifier module Part numbers Board number: 8002725C, module 60 Also includes modules 61, 65, and the amplifier heat sink Compatibility Beocenter 9000 only Condition In original, tested, working condition Postage The part will be carefully packed, boxed, and sent by recorded post. More parts and accessories for this and other B&O models are listed separately, or are available on request. Worldwide courier delivery is available: the price shown applies to Europe only, and delivery further afield may attract a supplement. Enquire before purchase for further details. All items are promptly despatched, and carefully packed using a minimum of plastic packaging.

Obseclec.com • 07753 241443 • Obscure Eclectics Parts UK delivery and 30-day returns included • worldwide delivery available • before and after sales enquiries: 07753 241443 Beocenter 9000/9500 Rectifier module Part numbers Part number: 8002731 Board number: 8002731G Module number: 62 Compatibility Becenter 9500 and 8500 Also compatible with the Beocenter 9000, but will have a spare socket position for the lack of transceiver Not compatible with Beocenter 9300 Condition The part is in tested, working condition; all four electrolytic capacitors have been replaced in the last 18 months: due to the fit of the original parts extra wires have been added to the negative terminals. Fit is good and, again, the part is working. Postage The part will be carefully packed in an ESD-safe bag, boxed, and sent by recorded post. Postage discounts are available wherever possible if purchasing multiple items. Worldwide courier delivery is available: the price shown applies to Europe only, and delivery further afield may attract a supplement. Enquire before purchase for further details. All items are promptly despatched, and carefully packed using a minimum of plastic packaging. See how we package parts-->

Obseclec.com • 07753 241443 • Obscure Eclectics Parts UK delivery and 30-day returns included • worldwide delivery available • before and after sales enquiries: 07753 241443 2 x125 W Amplifier A6143261 Part numbers Board number: A6143261 Version E Compatibility Fits BeoLab 3, BeoLab 6002, and BeoLab 8002 models. Also fits BeoLab 4000 Mk2 models, type numbers 6642, 6643, 6644, 6645, 6646, 6647, and 6648. Condition In fully tested, working condition Postage The part will be carefully packed in an ESD-safe bag, and boxed ready for despatch by recorded post. Worldwide delivery is available: the price shown applies to Europe only, and delivery further afield may attract a supplement. Enquire before purchase for further details. All items are promptly despatched, and carefully packed using a minimum of plastic packaging. See how we package parts-->