Circa 2000 B&W Bowers & Wilkins DM601 DM602 DM603 DM604 DM605 S2 ZZ11541 Tweeter in working condition.

The listing is for a pair of matching grilles. One grille has cracks at the bottom, another one has cracks at the bottom and at the top. They both have some small holes in fabrics. Generally I would say they are far from being perfect but still usable and all the imperfections not really noticeable from the distance. Please inspect the photos and please ask if you want to see anything in details. They will be packed with extra care to ensure safe delivery to anywhere in the world.

The listing is for a pair of matching grilles. One grille has cracks at the bottom, another one has cracks at the bottom and at the top. They both have some small holes in fabrics. Generally I would say they are far from being perfect but still usable and all the imperfections not really noticeable from the distance. Please inspect the photos and please ask if you want to see anything in details. They will be packed with extra care to ensure safe delivery to anywhere in the world.

2 x B&W Bowers & Wilkins Generic Replacement Gold Tweeter Diaphragm Voice Coils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit the bowers & wilkins DM6021, DM602, DM603, DM604 & DM605 S1 loudspeakers.They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot stright into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.