Hersteller:B&W Modell: DM 580 Baujahre: 1988-1991 Hergestellt in: England Abmessungen: 886 x 236 x 407 mm ( H x B x T) Farbe: Esche Schwarz, Walnuss Vinyl Gewicht: 18,5 kg Neupreis ca.: DM 2400,- (UVP Paar) Technische Daten Bauart: 3-Wege geschlossen, Standlautsprecher Chassis: Tieftner: 1x 200 mm Mitteltner: 1x 200 mm Hochtner: 1x 25 mm (Aluminiumkalotte) Belastbarkeit: 10 - 150 W Wirkungsgrad: 91 dB (2,83 V, 1 m) Frequenzgang: 50 - 20.000 (2,5 dB) bergangsbereiche:? Impedanz: 8 Ohm (Minimum 4,0 Die Lautsprecher befinden sich in einem guten gebrauchten Zustand und weisen so gut wie kaum Gebrauchsspuren auf legen dich ein paar leichte Kratzer auf den Deckel vom wischen

These are great speakers that sound great. Original owner in a non-smoking home. They also look great with no blemishes on the brown cabinet. Dimensions (H x W x D): 352 x 204 x 243 mm (13-7/8 x 8 x 9-1/2) Weight: 5,5 kg (12 lbs) Cabinet Finish: Simulated veneers of walnut. More from an audiophile web site: Following on from B&W's highly acclaimed and successful 100 Series, the DM550 digital monitor takes full advantage of a whole new generation of design technology to produce improved performance with a higher frequency range and lower colouration. With its aesthetically pleasing styling, your DM550 is designed to anticipate individual preferences and match all types of environment. System parameters for the B&W 500 Series have been optimised by the extensive use of computer aided design to ensure efficient and extended low frequency performance. To achieve the goal of flatter response curves and lower colouration, totally new drive unis have been designed - benefiting from the use of finite element predictions of cone behaviour and laser interferometer assessment of prototypes. Quite deliberately, the B&W 500 Series of loudspeakers are described as digital monitors. They have been designed for the age of the compact disc, with all the additional requirements that this material places on the loudspeaker system - such as increased dynamic range, increased transient information, lower noise floor, etc. B&W DM550 is however, just as much at home with good analogue material and essentially will faithfully reproduce whaatever signals are fed to it. Stand-mount/Bookshelf loudspeaker system The tailored two-way closed box design incorporates a 6 bass/midrange driver with a large magnet assembly thrusting high pressure sound reproduced to precise limits dictated by the dimensions of small enclosure. A one piece moulding has been used to strengthen the cabinet rigidity between drivers and front baffle. The metal-domed high frequency unit dictated by CAD allows the simplest of crossovers to be used. All of which increases cost-effectiveness without impairing linearity. Technical highlights B&W's Tweeter technology ensures that the sound remains focused and time sensitive and that the stereo image is presented with unparalleled three dimensional accuracy. The cabinets feature a specially designed high density front baffle which achieves almost Matrix-like stability in strengthening overall enclosure construction. The bevel edges of the front moulding reduce diffraction and improve dispersion. The crossover components use heavy gauge wire throughout and new drivers guarantee not only high reliability but ensure that top specifications are met The design brief for DM550 called for a small and cost-effective loudspeaker that could be incorporated unobtrusively into the home, while still possessing the linearity and bass extension of true monitor system. The drive units The two-unit closed box alignment chosen for DM550 employs a specially designed 160 mm (6) bass driver, with 26 mm (1) high temperature voice coil. This enables a simple crossover to be employed which not only increases cost effectiveness but retains system linearity. The new metal-domed tweeter uses the same diaphragm as the highly acclaimed Matrix 801 Series 2, and gives true piston behaviour up to frequencies in excess of 20 kHz. And like all B&W components, it's B&W made. The enclosure The expertise B&W have gained with cabinet technolgy following the invention of the B&W Matrixx Series has enabled us to reduce unwanted cabinet vibration. In the case of the 500 Series our attention has been focused on the front baffle construction, and we make full use of modern structural plastics, to both strengthen and enhance the appearance.

These are great speakers that sound great. Original owner in a non-smoking home. They also look great with no blemishes on the brown cabinet. Dimensions (H x W x D): 352 x 204 x 243 mm (13-7/8 x 8 x 9-1/2) Weight: 5,5 kg (12 lbs) Cabinet Finish: Simulated veneers of walnut. More from an audiophile web site: Following on from B&W's highly acclaimed and successful 100 Series, the DM550 digital monitor takes full advantage of a whole new generation of design technology to produce improved performance with a higher frequency range and lower colouration. With its aesthetically pleasing styling, your DM550 is designed to anticipate individual preferences and match all types of environment. System parameters for the B&W 500 Series have been optimised by the extensive use of computer aided design to ensure efficient and extended low frequency performance. To achieve the goal of flatter response curves and lower colouration, totally new drive unis have been designed - benefiting from the use of finite element predictions of cone behaviour and laser interferometer assessment of prototypes. Quite deliberately, the B&W 500 Series of loudspeakers are described as digital monitors. They have been designed for the age of the compact disc, with all the additional requirements that this material places on the loudspeaker system - such as increased dynamic range, increased transient information, lower noise floor, etc. B&W DM550 is however, just as much at home with good analogue material and essentially will faithfully reproduce whaatever signals are fed to it. Stand-mount/Bookshelf loudspeaker system The tailored two-way closed box design incorporates a 6 bass/midrange driver with a large magnet assembly thrusting high pressure sound reproduced to precise limits dictated by the dimensions of small enclosure. A one piece moulding has been used to strengthen the cabinet rigidity between drivers and front baffle. The metal-domed high frequency unit dictated by CAD allows the simplest of crossovers to be used. All of which increases cost-effectiveness without impairing linearity. Technical highlights B&W's Tweeter technology ensures that the sound remains focused and time sensitive and that the stereo image is presented with unparalleled three dimensional accuracy. The cabinets feature a specially designed high density front baffle which achieves almost Matrix-like stability in strengthening overall enclosure construction. The bevel edges of the front moulding reduce diffraction and improve dispersion. The crossover components use heavy gauge wire throughout and new drivers guarantee not only high reliability but ensure that top specifications are met The design brief for DM550 called for a small and cost-effective loudspeaker that could be incorporated unobtrusively into the home, while still possessing the linearity and bass extension of true monitor system. The drive units The two-unit closed box alignment chosen for DM550 employs a specially designed 160 mm (6) bass driver, with 26 mm (1) high temperature voice coil. This enables a simple crossover to be employed which not only increases cost effectiveness but retains system linearity. The new metal-domed tweeter uses the same diaphragm as the highly acclaimed Matrix 801 Series 2, and gives true piston behaviour up to frequencies in excess of 20 kHz. And like all B&W components, it's B&W made. The enclosure The expertise B&W have gained with cabinet technolgy following the invention of the B&W Matrixx Series has enabled us to reduce unwanted cabinet vibration. In the case of the 500 Series our attention has been focused on the front baffle construction, and we make full use of modern structural plastics, to both strengthen and enhance the appearance.

Selling My B&W DM-550 2-Way Stereo Bookshelf Speakers Vintage 80s Bowers & Wilkins. Speakers are in Good working condition, There are some scratches, Small chips on the edges and the tweeter on the left speaker is pushed inward (common thing with used vintage speakers) but they sounds great! What you see in the photos is what you get! Any questions feel free to ask! Thank you and have a good day.

Selling My B&W DM-550 2-Way Stereo Bookshelf Speakers Vintage 80s Bowers & Wilkins. Speakers are in Good working condition, There are some scratches, Small chips on the edges and the tweeter on the left speaker is pushed inward (common thing with used vintage speakers) but they sounds great! Any questions feel free to ask! Thank you and have a good day.