You are bidding on an exceptional pair of B&W 800 D3 Loudspeakers, Includes manufacturer box and accessories. SpecificationsDescription: Three-way, vented-box, floorstanding loudspeaker. Drive-units: 1 (25mm) diamond-dome tweeter, 6 (160mm) woven-Kevlar FST-cone midrange unit, two 10 (250mm) Rohacell-cone woofers. Crossover frequencies: 350Hz, 4kHz. Manufacturers specifications: Frequency range: –6dB at 25Hz and 33kHz. Frequency response: 32Hz–28kHz, ±3dB on reference axis. Dispersion: within 2dB of on-axis response over 60° (horizontal) and 10° (vertical) arcs. Sensitivity: 90dB SPL (2.83V/m). Harmonic distortion (second and third harmonics, 90dB, 1m): <1.0%, 45Hz–100kHz; <0.5%, 80Hz–100kHz. Impedance: 8 ohms nominal, 3.1 ohms minimum. Recommended amplification: 50–1000W into 8 ohms with unclipped program. Maximum recommended cable impedance: 0.1 ohm. Dimensions: 46.5 (1180mm) H by 17.7 (450mm) W by 25.4 (645mm) D. Weight: 225 lbs (102kg). Finish: Piano Black Gloss.WIll ship flat rate freight: $750.00

You are bidding on an exceptional pair of B&W 800 D3 Loudspeakers, Includes manufacturer box and accessories. SpecificationsDescription: Three-way, vented-box, floorstanding loudspeaker. Drive-units: 1 (25mm) diamond-dome tweeter, 6 (160mm) woven-Kevlar FST-cone midrange unit, two 10 (250mm) Rohacell-cone woofers. Crossover frequencies: 350Hz, 4kHz. Manufacturers specifications: Frequency range: –6dB at 25Hz and 33kHz. Frequency response: 32Hz–28kHz, ±3dB on reference axis. Dispersion: within 2dB of on-axis response over 60° (horizontal) and 10° (vertical) arcs. Sensitivity: 90dB SPL (2.83V/m). Harmonic distortion (second and third harmonics, 90dB, 1m): <1.0%, 45Hz–100kHz; <0.5%, 80Hz–100kHz. Impedance: 8 ohms nominal, 3.1 ohms minimum. Recommended amplification: 50–1000W into 8 ohms with unclipped program. Maximum recommended cable impedance: 0.1 ohm. Dimensions: 46.5 (1180mm) H by 17.7 (450mm) W by 25.4 (645mm) D. Weight: 225 lbs (102kg). Finish: Piano Black Gloss.WIll ship flat rate freight: $750.00

You are bidding on an exceptional pair of B&W 800 D3 Loudspeakers, Includes manufacturer box and accessories. SpecificationsDescription: Three-way, vented-box, floorstanding loudspeaker. Drive-units: 1 (25mm) diamond-dome tweeter, 6 (160mm) woven-Kevlar FST-cone midrange unit, two 10 (250mm) Rohacell-cone woofers. Crossover frequencies: 350Hz, 4kHz. Manufacturers specifications: Frequency range: –6dB at 25Hz and 33kHz. Frequency response: 32Hz–28kHz, ±3dB on reference axis. Dispersion: within 2dB of on-axis response over 60° (horizontal) and 10° (vertical) arcs. Sensitivity: 90dB SPL (2.83V/m). Harmonic distortion (second and third harmonics, 90dB, 1m): <1.0%, 45Hz–100kHz; <0.5%, 80Hz–100kHz. Impedance: 8 ohms nominal, 3.1 ohms minimum. Recommended amplification: 50–1000W into 8 ohms with unclipped program. Maximum recommended cable impedance: 0.1 ohm. Dimensions: 46.5 (1180mm) H by 17.7 (450mm) W by 25.4 (645mm) D. Weight: 225 lbs (102kg). Finish: Piano Black Gloss.WIll ship flat rate freight: $750.00

You are bidding on an exceptional pair of B&W 800 D3 Loudspeakers, Includes manufacturer box and accessories. SpecificationsDescription: Three-way, vented-box, floorstanding loudspeaker. Drive-units: 1 (25mm) diamond-dome tweeter, 6 (160mm) woven-Kevlar FST-cone midrange unit, two 10 (250mm) Rohacell-cone woofers. Crossover frequencies: 350Hz, 4kHz. Manufacturers specifications: Frequency range: –6dB at 25Hz and 33kHz. Frequency response: 32Hz–28kHz, ±3dB on reference axis. Dispersion: within 2dB of on-axis response over 60° (horizontal) and 10° (vertical) arcs. Sensitivity: 90dB SPL (2.83V/m). Harmonic distortion (second and third harmonics, 90dB, 1m): <1.0%, 45Hz–100kHz; <0.5%, 80Hz–100kHz. Impedance: 8 ohms nominal, 3.1 ohms minimum. Recommended amplification: 50–1000W into 8 ohms with unclipped program. Maximum recommended cable impedance: 0.1 ohm. Dimensions: 46.5 (1180mm) H by 17.7 (450mm) W by 25.4 (645mm) D. Weight: 225 lbs (102kg). Finish: Piano Black Gloss.WIll ship flat rate freight: $750.00

This listing is for a Bowers & Wilkins B&W 800 D3 series tweeter with broken dome which got damaged while shipping the speakers, the rest of the body and connectors are still in good shape as seen in pictures and magnet is strong. The cost of a working replacement tweeter from B&W is $968.95, but if you dont want to spend that kind of money and take a chance buying this one cheap and replace with an aftermarket dome diaphragm to see if it works. This item is being sold as is and no returns and also no International shipping. Thank you. Compatible with the following series of Bowers & Wilkens speakers:HTM1D3HTM2D3804D3803D3805D3802D3800D3

You are bidding on an exceptional pair of B&W 800 D3 Loudspeakers, Includes manufacturer box and accessories. SpecificationsDescription: Three-way, vented-box, floorstanding loudspeaker. Drive-units: 1 (25mm) diamond-dome tweeter, 6 (160mm) woven-Kevlar FST-cone midrange unit, two 10 (250mm) Rohacell-cone woofers. Crossover frequencies: 350Hz, 4kHz. Manufacturers specifications: Frequency range: –6dB at 25Hz and 33kHz. Frequency response: 32Hz–28kHz, ±3dB on reference axis. Dispersion: within 2dB of on-axis response over 60° (horizontal) and 10° (vertical) arcs. Sensitivity: 90dB SPL (2.83V/m). Harmonic distortion (second and third harmonics, 90dB, 1m): <1.0%, 45Hz–100kHz; <0.5%, 80Hz–100kHz. Impedance: 8 ohms nominal, 3.1 ohms minimum. Recommended amplification: 50–1000W into 8 ohms with unclipped program. Maximum recommended cable impedance: 0.1 ohm. Dimensions: 46.5 (1180mm) H by 17.7 (450mm) W by 25.4 (645mm) D. Weight: 225 lbs (102kg). Finish: Piano Black Gloss.WIll ship flat rate freight: $750.00

Great condition! This is the mounting bracket for the turbine shaped solid metal midrange housing only. Removed from a Bowers & Wilkins 800 D3 speaker. Includes hardware. Please see all photos. See my feedback and buy with confidence! Orders will ship within 2 business days (M-F)Shipping cost is for contiguous 48 states only. If you are in Alaska, Hawaii, or any US Territory please contact me prior to purchasing. Please review all photos and description prior to purchasing and reach out if you have any questions.

Good condition wheeled base removed from a Bowers & Wilkins 800 D3 speaker. Includes the wheels and the floor spikes. Very sturdy with scrapes on both sides of the base from moving. Please see photos for cosmetic condition. See my feedback and buy with confidence! Orders will ship within 2 business days (M-F)Shipping cost is for contiguous 48 states only. If you are in Alaska, Hawaii, or any US Territory please contact me prior to purchasing. Please review all photos and description prior to purchasing and reach out if you have any questions.

You are bidding on an exceptional pair of B&W 800 D3 Loudspeakers, Includes manufacturer box and accessories. SpecificationsDescription: Three-way, vented-box, floorstanding loudspeaker. Drive-units: 1 (25mm) diamond-dome tweeter, 6 (160mm) woven-Kevlar FST-cone midrange unit, two 10 (250mm) Rohacell-cone woofers. Crossover frequencies: 350Hz, 4kHz. Manufacturers specifications: Frequency range: –6dB at 25Hz and 33kHz. Frequency response: 32Hz–28kHz, ±3dB on reference axis. Dispersion: within 2dB of on-axis response over 60° (horizontal) and 10° (vertical) arcs. Sensitivity: 90dB SPL (2.83V/m). Harmonic distortion (second and third harmonics, 90dB, 1m): <1.0%, 45Hz–100kHz; <0.5%, 80Hz–100kHz. Impedance: 8 ohms nominal, 3.1 ohms minimum. Recommended amplification: 50–1000W into 8 ohms with unclipped program. Maximum recommended cable impedance: 0.1 ohm. Dimensions: 46.5 (1180mm) H by 17.7 (450mm) W by 25.4 (645mm) D. Weight: 225 lbs (102kg). Finish: Piano Black Gloss.WIll ship flat rate freight: $750.00

Great condition! Tweeter housing only. Please see all photos. See my feedback and buy with confidence! Orders will ship within 2 business days (M-F)Shipping cost is for contiguous 48 states only. If you are in Alaska, Hawaii, or any US Territory please contact me prior to purchasing. Please review all photos and description prior to purchasing and reach out if you have any questions.

Great condition! Solid Metal midrange housing only. Removed from a Bowers & Wilkins 800 D3 speaker. Minor cosmetic marking as shown in the photos. Please see all photos. See my feedback and buy with confidence! Orders will ship within 2 business days (M-F)Shipping cost is for contiguous 48 states only. If you are in Alaska, Hawaii, or any US Territory please contact me prior to purchasing. Please review all photos and description prior to purchasing and reach out if you have any questions.

Fully functional and in excellent condition. This is a perfect mid range replacement! Removed from a Bowers & Wilkins 800 D3. Please see all photos. See my feedback and buy with confidence! Orders will ship within 2 business days (M-F)Shipping cost is for contiguous 48 states only. If you are in Alaska, Hawaii, or any US Territory please contact me prior to purchasing. Please review all photos and description prior to purchasing and reach out if you have any questions.

You are bidding on an exceptional pair of B&W 800 D3 Loudspeakers, Includes manufacturer box and accessories. SpecificationsDescription: Three-way, vented-box, floorstanding loudspeaker. Drive-units: 1 (25mm) diamond-dome tweeter, 6 (160mm) woven-Kevlar FST-cone midrange unit, two 10 (250mm) Rohacell-cone woofers. Crossover frequencies: 350Hz, 4kHz. Manufacturers specifications: Frequency range: –6dB at 25Hz and 33kHz. Frequency response: 32Hz–28kHz, ±3dB on reference axis. Dispersion: within 2dB of on-axis response over 60° (horizontal) and 10° (vertical) arcs. Sensitivity: 90dB SPL (2.83V/m). Harmonic distortion (second and third harmonics, 90dB, 1m): <1.0%, 45Hz–100kHz; <0.5%, 80Hz–100kHz. Impedance: 8 ohms nominal, 3.1 ohms minimum. Recommended amplification: 50–1000W into 8 ohms with unclipped program. Maximum recommended cable impedance: 0.1 ohm. Dimensions: 46.5 (1180mm) H by 17.7 (450mm) W by 25.4 (645mm) D. Weight: 225 lbs (102kg). Finish: Piano Black Gloss.WIll ship flat rate freight: $750.00

Excellent condition magnetic silver woofer surround piece with the rubber gasket. This trim was removed from a Bowers & Wilkins 800 D3 10 Woofer. Please see all photos. See my feedback and buy with confidence! Orders will ship within 2 business days (M-F)Shipping cost is for contiguous 48 states only. If you are in Alaska, Hawaii, or any US Territory please contact me prior to purchasing. Please review all photos and description prior to purchasing and reach out if you have any questions.

Tested and fully functional! Removed from a working Bowers & Wilkins 800 D3. This bass driver shows minimal signs of use and has no damage or defect. Please see all photos. See my feedback and buy with confidence! Orders will ship within 3 business days (M-F)Shipping cost is for contiguous 48 states only. If you are in Alaska, Hawaii, or any US Territory please contact me prior to purchasing. Please review all photos and description prior to purchasing and reach out if you have any questions.

You are bidding on an exceptional pair of B&W 800 D3 Loudspeakers, Includes manufacturer box and accessories. SpecificationsDescription: Three-way, vented-box, floorstanding loudspeaker. Drive-units: 1 (25mm) diamond-dome tweeter, 6 (160mm) woven-Kevlar FST-cone midrange unit, two 10 (250mm) Rohacell-cone woofers. Crossover frequencies: 350Hz, 4kHz. Manufacturers specifications: Frequency range: –6dB at 25Hz and 33kHz. Frequency response: 32Hz–28kHz, ±3dB on reference axis. Dispersion: within 2dB of on-axis response over 60° (horizontal) and 10° (vertical) arcs. Sensitivity: 90dB SPL (2.83V/m). Harmonic distortion (second and third harmonics, 90dB, 1m): <1.0%, 45Hz–100kHz; <0.5%, 80Hz–100kHz. Impedance: 8 ohms nominal, 3.1 ohms minimum. Recommended amplification: 50–1000W into 8 ohms with unclipped program. Maximum recommended cable impedance: 0.1 ohm. Dimensions: 46.5 (1180mm) H by 17.7 (450mm) W by 25.4 (645mm) D. Weight: 225 lbs (102kg). Finishes: Cherrywood, Rosewood, Piano Black Gloss.WIll ship flat rate freight: $700.00

You are bidding on an exceptional pair of B&W 800 D3 Loudspeakers, Includes manufacturer box and accessories. SpecificationsDescription: Three-way, vented-box, floorstanding loudspeaker. Drive-units: 1 (25mm) diamond-dome tweeter, 6 (160mm) woven-Kevlar FST-cone midrange unit, two 10 (250mm) Rohacell-cone woofers. Crossover frequencies: 350Hz, 4kHz. Manufacturers specifications: Frequency range: –6dB at 25Hz and 33kHz. Frequency response: 32Hz–28kHz, ±3dB on reference axis. Dispersion: within 2dB of on-axis response over 60° (horizontal) and 10° (vertical) arcs. Sensitivity: 90dB SPL (2.83V/m). Harmonic distortion (second and third harmonics, 90dB, 1m): <1.0%, 45Hz–100kHz; <0.5%, 80Hz–100kHz. Impedance: 8 ohms nominal, 3.1 ohms minimum. Recommended amplification: 50–1000W into 8 ohms with unclipped program. Maximum recommended cable impedance: 0.1 ohm. Dimensions: 46.5 (1180mm) H by 17.7 (450mm) W by 25.4 (645mm) D. Weight: 225 lbs (102kg). Finishes: Cherrywood, Rosewood, Piano Black Gloss.WIll ship flat rate freight: $700.00

Tested and fully functional! Removed from a working Bowers & Wilkins 800 D3. This bass driver shows minimal signs of use and has no damage or defect. Please see all photos. See my feedback and buy with confidence! Orders will ship within 3 business days (M-F)Shipping cost is for contiguous 48 states only. If you are in Alaska, Hawaii, or any US Territory please contact me prior to purchasing. Please review all photos and description prior to purchasing and reach out if you have any questions.

B&W Bowers & Wilkins PM7 Speakers Pre-Production PM1 800 802 803 804 805D2 D3 D4. These are genuine B&W PM7 Pre-Production speakers from 2012. If you search on the internet, you will find no information on the PM7s as they never made the market. Based on the highly successful bookshelf PM1 speaker released in 2011. These floor standing versions are also finished in high gloss mocha veneer and soft touch as the PM1 was. I believe the reasons why the PM7 never made the market was the high cost to produce them, and with this in mind, the price point would have been close to the 804 D2 of the time, and possibly would have taken sales away from the 804. The listing shows the concept picture by Native design of the PM7 with a different stand, please note, at the time 700 S2 was not released so the PM series was going to be names 700 series S2. This concept picture is NOT INCLUDED. These are exceptionally rare, its believed B&W made 6x prototype units, and no more than 20 pre-production units. Some of these may have been destroyed by the company, which is common practice if a product doesnt go to market. This might be the only chance you get to own a pair of PM7. I do not have any access to any specification for the PM7, but they do share the same tweeter as the PM1. The bass and mid-range drivers are unique to this model as i guess the cross overs are. I have heard PM7s in action and they sound awesome. As like the PM1, you get a lot of sound from a small/slim unit. Condition wise, these have only been taken out of the box, they have never been used. The only issue i have found is some blemishes to the front of the cabinets in the soft touch finish (please see pictures). These may clean out, but I have not attempted this. The soft touch finush on the cabinets and components is not sticky to the touch in any area. As these are pre-production, there was no manual or accessory packs made/included and the outer carton is plain with no graphics, just the sample sticker. I have managed to make an accessory pack comprising of the spikes/rubber feet, jumper cables, foam port bungs and do have a pair of grilles. How did i get something so rare and unique? I used to work for Bowers & Wilkins and bought these from them 5 years ago. I have a receipt with proves i paid for these and wasnt just given them out the back door, as it might be suggested. I legitimately own them and can sell them if i wish to. If you have any questions, please message me and i will do my best to answer them. PICK UP ONLY AND CASH/BANK TRANSFER ON COLLECTION 07766100013

Edwards Home Entertainment and Design, an appointed and displaying dealer for McIntosh, Bowers & Wilkins, Focal, NAIM, Parasound, Classe Audio, Rotel and Michi, Fyne Audio, Rel Acoustics, JL Audio, Perlisten, Soul Note, Gold Note, Marantz, Rose HiFi, AudioQuest, Nordost, as well as part of the Verified Premier Dealer Program on AudioGon, is offering a pair of Bowers & Wilkins 800D3 speakers.These speakers are without issues, with grills, packaging, and boxes. Buy / Sell / Trade / Consign - Edwards Home Entertainment and Design (EHEAD) has been a premier seller of carefully selected, pre-loved high end audio equipment since 1997 and is now an authorized dealer for McIntosh (displaying C2700, C22, C12000, MC462, MC275vi, MC1.25s, MEN220, MT-10, MT-5, MA12000, MA352, MA252, MPC500, MPC1500, MHA200, speakers and interconnect cabling), Bowers & Wilkins (displaying 801D4, 802D4, 803D4, 804D4, 805D4, 702S3), Focal (displaying Scala EVO, Sopra3, Sopra2), NAIM (displaying the SuperNAIT3), Rotel Michi (displaying the P5s2, S5, X3s2), Classe Delta (displaying the Delta Pre, Delta Stereo, Delta Monos), Fyne Audio (displaying F1-12, F1-8, 502SP, F700), HiFiROSE (displaying the RS150, RS250 and RS520), Parasound (displaying JC-1+, JC2BP, JC-5, JC-3+, and HINT6), Jeff Wells Audio (displaying Commander II and Innamorata II), Marantz (displaying PM-10 Integrated, SA-10 Super Audio SACD/CD Player, TT-15S2 TurnTable), Rel Acoustics (displaying the Carbon Special, S/812, S/512, and T9/x), Perlisten (displaying the S7t and D212), JL Audio (displaying the G213v2, F113v2, D and E subs), Soul Note (displaying the A2 integrated), Nordost (displaying Norse and Leif series, with demo cases for in home trials), AudioQuest (displaying all power centers, 7000, 5000, 3000, Thunderbird, Black Beauty, Pegasus cabling), SolidSteel (displaying HyperSpike stands and amp stands), NEO Luxury Audio Racks (displaying the Quattron), Bossocontinuo (displaying the McRack) Reference. Visit the EHEADAudio com site in South San Francisco, CA for direct phone (begins with 925) / voice / text support. We are always looking to buy quality used gear. Despite listings that may indicate LOCAL PICK UP ONLY - this is just to facilitate posting of gear. Logistics is our specialty, we can facilitate packaging and shipping to and from anywhere in the country. If you are interested in our gear, please reach out and we can figure out a shipping solution that will work. Our shop is in South San Francisco - stop by and put your eyes and ears to work!