Bang Olufsen B&O Beocenter 7000 / 7002 Bouton Eject Programming Hifi Vintage En bon tat Envoi rapide et soign

Bang Olufsen B&O Beocenter 7000 / 7002 Mmoire FM Tonalit Hifi Vintage En bon tat Envoi rapide et soign

Bang & Olufsen B&O Fernbedienung Remote Control für Beocenter 7000 / 7002. Condition is Used. Shipped with USPS First Class.

Bang Olufsen B&O Beocenter 7000 / 7002 Plateau Platine Vinyl Hifi Vintage En bon tat Envoi rapide et soign

Bang Olufsen B&O Beocenter 7000 / 7002 Display Cover Hifi Vintage En bon tat Envoi rapide et soign

Bang Olufsen B&O Beocenter 7000 / 7002 Module Radio FM AM LW Hifi Vintage Test fonctionnel En bon tat Envoi rapide et soign

Bang Olufsen B&O Beocenter 7000 / 7002Bloc Dalimentation Hifi Vintage Test fonctionnel En bon tat Envoi rapide et soign

Bang & Olufsen B&O Fernbedienung Remote Control für Beocenter 7000 / 7002

Bang & Olufsen - Beocenter Control Module - Fernbedienung für Beomaster 7000 / 7002 Funktioniert Zustand gebraucht - siehe Bilder Privatverkauf: keine Rückgabe, keine Gewährleistung !!!

Bang & Olufsen - Beocenter Control Module - Fernbedienung für Beomaster 7000 / 7002 Funktioniert Zustand gebraucht - siehe Bilder Privatverkauf: keine Rückgabe, keine Gewährleistung !!!

In good used condition. Stylus only! Please refer to pictures for condition and what is included. I have other vintage items on other listings. Thank you for looking.

Bang & Olufsen - Beocenter Control Module - Fernbedienung für Beomaster 7000 / 7002 Funktioniert Zustand gebraucht - siehe Bilder Privatverkauf: keine Rückgabe, keine Gewährleistung !!!

BANG OLUFSEN MMC20S STYLUS CARTRIDGE B&O beocenter 4600 4800 7000 7002 5000

USED CONDITION. TESTED & WORKING. COMPATIBLE WITH B&O Beocenter 4600, 4800, 7000, 7002, 5000 AMONG OTHER UNITS.

Bang & Olufsen - Beocenter Control Module - Fernbedienung für Beomaster 7000 / 7002 Funktioniert Zustand gebraucht - siehe Bilder Privatverkauf: keine Rückgabe, keine Gewährleistung !!!

Bang & Olufsen - Beocenter Control Module - Fernbedienung für Beomaster 7000 / 7002 Funktioniert Zustand gebraucht - siehe Bilder Privatverkauf: keine Rückgabe, keine Gewährleistung !!!

In good used condition. Stylus only! Please refer to pictures for condition and what is included. I have other vintage items on other listings. Thank you for looking.

Lot composants actifs et divers BEOCENTER 7002 (B&O Bang et Olufsen). Liste:-1 circuit intégré P8355 Intel fonctionnel (gère panneau affichage, compteur) -1 circuit intégré P8048 Intel fonctionnel (gère panneau affichage, compteur) -2 Darlington BDV64A (PNP 12A 125W 80V) testés-2 Darlington BDV65A (NPN 12A 125W 80V) testés-1 Darlington TE1088 (NPN 10A 70W 100V) testé, pratiquement introuvable -1 Darlington TE1089 (PNP 10A 70W 100V) testé, pratiquement introuvable -4 résistances de protection 0,39 Ohms +/- 10% testées -3 condensateurs 4700µF/35V (2 sont dans les tolérances de +/- 20% et 1 légèrement hors tolérance )-2 tiges plastique de maintien (Très rare) en bon état-4 ressorts de placage transistors de puissance grande taille (pour BDV64A et 65A) -3 ressorts de placage transistors moyenne puissance (pour TE 1088 et 1089, le dernier servait pour un régulateur standard) Déterminez la cause de la panne de la partie ampli avant de vous lancer dans un changement des transistors de puissance!Pensez à remettre pate thermique et isolant pour les transistors Pas de demande de vente au détail SVP... Emballage soignéEnvoi Colissimo (France et union Européenne) ou Mondial relay (France uniquement)

Original Bang & Olufsen MMC20E Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise.Tracking perfectly.Sounds great.Stock images appearance will vary slightly.BANG & OLUFSEN MMC20E CART & STYLUS BEOGRAM 6000 4000 8000 BEOCENTER 7000 7002 3600 4600Inspected, tested - see images MMC means Moving Micro-Cross Titanium-bonded naked elliptical diamond, to reduce record wear and maintain optimum surface contact Effective Tip Mass of mg 0,4 this is what preserves your vinyl! MMC20EManufactured: 1979 - 1985Designer: Jacob JensenColours: BlackPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges: MMC cartridges were available with standard ½ mounting brackets, or with easy plug-in, lightweight connectors. These enabled you to mount MMC cartridges onto non-Bang & Olufsen arms. The cartridges plugged directly into Beogram pickup arms without additional mounting gear MMC 20 S was a stereo cartridge with a spherical framed diamond MMC 20 E was fitted with a framed elliptical diamond which has a high polish MMC 20EN had a naked elliptical diamond, mounted on a tiny tapered cantilever MMC 20 CL utilised a Contact Line naked diamond mounted on a single crystal sapphire cantilever. This shape ensures maximum groove contact. This was the most highly-specified cartridge in the MMC 20 range In 1958, Bang & Olufsen introduced the first stereo pickup cartridge ever made in Europe. This was called the SP1. Since then, many design innovations and the creative use of new materials have kept B&Os cartridges at the forefront of audio technology. By 1979 - 80, Bang & Olufsens cartridges were represented by the MMC 20 series. MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources. No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. The MMC20 series therefore represented the closest that modern technology at that time, could possibly afford. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Bang & Olufsen cartridges have always been highly acclaimed for their low ETM values. The ETM of the MMC 20CL is a mere 0,3mg and in the standard MMC 20 range,, only 0,5mg. MMC cartridges were manufactured by Bang & Olufsen as totally integrated units. This means that the elements were matched, balanced and sealed at the factory. Using a computer-supported testing programme,, each sealed unit was meticulously tested and its performance information automatically registered and packed with each cartridge. The information given included output voltage, relative voltage output (channel balance), channel separation and frequency response. Individually-calibrated frequency response curves were also supplied with the higher-specified MMC 20CL cartridges.

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it.The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 CartridgesPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC 20 S is a stereo cartridge with a spherical framed diamond Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it.The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 CartridgesPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC 20 S is a stereo cartridge with a spherical framed diamond Any questions just get in touch, Id be glad to help.

This auction includes an original vintage Bang & Olufsen (B&O) model MMC 20E stereo turntable cartridge and stylus in very clean and excellent working condition. This cartridge was originally purchased as a backup however, it was never used except for testing it for this listing. This cartridge tracks perfectly and sounds great. This cartridge comes as shown in the photos. Own this vintage B&O MMC-20E turntable cartridge for a great price. This item is not available for local pickup, it will need to be shipped to your location. All of my items are packed very well for a safe trip and I include full shipping damage insurance coverage with all of my items. International buyers may be responsible for customs fees, import taxes, and duties.

Original Bang & Olufsen MMC20E Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise.Tracking perfectly.Sounds great.Stock images appearance will vary slightly.BANG & OLUFSEN MMC20E CART & STYLUS BEOGRAM 6000 4000 8000 BEOCENTER 7000 7002 3600 4600Inspected, tested - see images MMC means Moving Micro-Cross Titanium-bonded naked elliptical diamond, to reduce record wear and maintain optimum surface contact Effective Tip Mass of mg 0,4 this is what preserves your vinyl! MMC20EManufactured: 1979 - 1985Designer: Jacob JensenColours: BlackPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges: MMC cartridges were available with standard ½ mounting brackets, or with easy plug-in, lightweight connectors. These enabled you to mount MMC cartridges onto non-Bang & Olufsen arms. The cartridges plugged directly into Beogram pickup arms without additional mounting gear MMC 20 S was a stereo cartridge with a spherical framed diamond MMC 20 E was fitted with a framed elliptical diamond which has a high polish MMC 20EN had a naked elliptical diamond, mounted on a tiny tapered cantilever MMC 20 CL utilised a Contact Line naked diamond mounted on a single crystal sapphire cantilever. This shape ensures maximum groove contact. This was the most highly-specified cartridge in the MMC 20 range In 1958, Bang & Olufsen introduced the first stereo pickup cartridge ever made in Europe. This was called the SP1. Since then, many design innovations and the creative use of new materials have kept B&Os cartridges at the forefront of audio technology. By 1979 - 80, Bang & Olufsens cartridges were represented by the MMC 20 series. MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources. No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. The MMC20 series therefore represented the closest that modern technology at that time, could possibly afford. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Bang & Olufsen cartridges have always been highly acclaimed for their low ETM values. The ETM of the MMC 20CL is a mere 0,3mg and in the standard MMC 20 range,, only 0,5mg. MMC cartridges were manufactured by Bang & Olufsen as totally integrated units. This means that the elements were matched, balanced and sealed at the factory. Using a computer-supported testing programme,, each sealed unit was meticulously tested and its performance information automatically registered and packed with each cartridge. The information given included output voltage, relative voltage output (channel balance), channel separation and frequency response. Individually-calibrated frequency response curves were also supplied with the higher-specified MMC 20CL cartridges.

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it.The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 CartridgesPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC 20 S is a stereo cartridge with a spherical framed diamond Any questions just get in touch, Id be glad to help.