Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Power cable included. Experience high-quality audio with the Aune X1S desktop audio amplifier. This unit offers active amplification, DAC, and digital inputs/outputs, including USB, stereo L/R RCA, and digital optical TOSLINK. The black Aune X1S has two outputs, a headphone jack, and two stereo L/R RCA inputs, one of which is optional. This anniversary edition DAC/amp headphone is perfect for audiophiles who want to enhance their music listening experience. With its 32bit/384KHz DSD capabilities, the Aune X1S offers crystal-clear sound quality. Get this unit today and enjoy your favorite music in style.

Experience high-quality audio with the AUNE X1s GT DAC and Headphone AMP. This Hi-Fi amplifier comes with multiple audio inputs including Digital Coaxial RCA, USB, and Digital Optical TOSLINK. The device also has a 768K HiFi decoder and supports DSD 512 for an immersive audio experience. The sleek black design adds a touch of style to your home audio setup. The AUNE X1s GT DAC and Headphone AMP is perfect for anyone looking to enhance their music listening experience. With its powerful sound and advanced features, this Hi-Fi amplifier is sure to impress. Get ready to enjoy crystal-clear audio quality with this amazing device.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Aune X1s GT Balanced Music DAC Decoder HiFi Decoding Headphone Amp. Come nuovo, poco usato, completo di alimentatore originale ed alimentatore aggiuntivo Aune XP1. Imballi e cavi originali.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Aune X1s GT Balanced Music DAC Decoder HiFi Decoding Headphone Amp. Come nuovo, poco usato, completo di alimentatore originale ed alimentatore aggiuntivo Aune XP1. Imballi e cavi originali.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Audiophile USB DAC/amp Aune X1S 32bit 384KHz DSD headphone Amplifier hifi studio. wow just WOW is this a good DAC/amp, nothing but positive things to say about it. Line outs to connect straight to an amp (meaning 2 headphones can be connected at the same time) warm surrounding bass and an especially exciting soundstage. rivals my 800$ dap DOES NOT COME WITH EMANUAL AND THE PS IS EUROPEAN - this can be fixed easily with a 5$ adapter on amazon

Aune X1S DAC/amp headphone audiophile 32bit / 384KHz DSD (drives 300+ohms) desk. Aune X1S DAC/amp headphone audiophile 32bit / 384KHz DSD (drives 300+ohms) desk. PRESTINE condition just look at those photos, everything works PERFECTLY never had any issues. Zero, null - nothing but pure musical bliss. This thing absolutely ROCKS, it has insane soundstage, imaging and especially detail. So, so much detail its really rewarding. Only selling since I got a very overpowered DAC, that said this sounds just as good for less than half (or even a third) of the price of that. I seriously wouldnt mind keeping this unit. In fact, when I liked this so much I bought 2 of them. Yep, check my other listing for the black model. But its about time they go to a new happy owner. DOES NOT COME WITH DIGITAL MANUAL!!!

Aune X1s GT Balanced Music DAC Decoder HiFi Decoding Headphone Amp. Come nuovo, poco usato, completo di alimentatore originale ed alimentatore aggiuntivo Aune XP1. Imballi e cavi originali.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Aune X1s GT Balanced Music DAC Decoder HiFi Decoding Headphone Amp. Come nuovo, poco usato, completo di alimentatore originale ed alimentatore aggiuntivo Aune XP1. Imballi e cavi originali.

Aune X1s GT Balanced Music DAC Decoder HiFi Decoding Headphone Amp. Come nuovo, poco usato, completo di alimentatore originale ed alimentatore aggiuntivo Aune XP1. Imballi e cavi originali.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.