AUNE BU2 Amplifier Headphones DAC Portable 2x ES9318 Bluetooth 5.0 32bit 768kHz. https://www.audiophonics.fr/fr/amplificateur-casque-mobile/aune-bu2-amplificateur-casque-dac-portable-2x-es9318-bluetooth-50-32bit-768khz-dsd512-p-15640.html

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Experience high-quality audio with the AUNE X1s GT DAC and Headphone AMP. This Hi-Fi amplifier comes with multiple audio inputs including Digital Coaxial RCA, USB, and Digital Optical TOSLINK. The device also has a 768K HiFi decoder and supports DSD 512 for an immersive audio experience. The sleek black design adds a touch of style to your home audio setup. The AUNE X1s GT DAC and Headphone AMP is perfect for anyone looking to enhance their music listening experience. With its powerful sound and advanced features, this Hi-Fi amplifier is sure to impress. Get ready to enjoy crystal-clear audio quality with this amazing device.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Da ich auf ein Highend-Lautsprechersystem umsteigen möchte, löse ich meine sehr umfangreiche Kopfhörersammlung auf. Alle von mir eingestellten Kopfhörer sowie DACs, Kopfhörerverstärker etc. sind(solange nicht anders beschrieben) in absolut neuwertigem Zustand und optisch und technisch nicht von Neuware zu unterscheiden. Die von mir eingestellten Kopfhörer, DACs und Kopfhörerverstärker wurden(solange nicht anders beschrieben) einmalig getestet und dann eingelagert. Der Aune S6 hat minimale kaum sichtbare Gebrauchsspuren die durch das einmalige anschliessen entstanden sind. Der Aune S6 kommt inkl. Stromkabel, die Originalverpackung ist nicht mehr vorhanden. Der Aune S6 wurde einmalig angeschlossen und getestet. Die UVP liegt bei 549 Euro somit sparen Sie 250 Euro! Wie bei Privatverkäufen üblich: „Die Ware wird unter Ausschluss jeglicher Gewährleistung verkauft.“

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Shipped from US (no import) - SEALED Aune X5s Multi-Functional-Player 8. Anniversary Ed. Hi-Res Hi-Res Digital Music Player Bluetooth AptX HD Streamer and Transmitter High Definition Files FPGA 4th Generation PLL Clock Technologie and External Clock Support Remote Control The X5s 8th Anniversary Edition is the 4th generation of the aune X5 digital music player series. It adopts the freescaleTM 600M processor and the hardware decoding frame. The 8th Anniversary Edition even managed to handle 32bit/768k and DSD512. Whats more, it adds the support for external clock. It is a multy-functional digital music player that purely focuses on sound quality.A Bluetooth Transport/PlayerWith FPGA Asynchronous Technology With the CSR867X Bluetooth 5.0 module and the support for aptX HD, the X5s 8th Anniversary Edition can be easily connected to a mobile phone and receive high-quality audio files from online music libraries. And then it can output coaxial/optical digital signals and analog signals at the same time.External Clock Support Ultra-low jitter PLL. FPGA technology. External clock input. More room for your exploration of the sound. (XC1 clock recommended)Ideal DoP Coaxial Output SupportWithout a PC You Can Reach 32bit/384k DSD128 Too The X5s 8th Anniversary Edition, which uses FPGA asynchronous clock technology to regenerate digital signals, can be paired with the Aune X8 DAC or the Aune X1s DAC/amp to build the 32bit/384k DSD128 system without a PC.Adjustable Line Out7 Filter Modes Adjustable line out optional; 7 filter modes to choose from. There’s always one for you.Supports Various External Storage Devices An SD card slot, a USB port; external hard drive support up to 2 TB. Play as you wish.4th Generation FPGAAsynchronous Clock FIFO Technology ARM decodes music files directly, transmits the signals to the FPGA which has an ultra-low jitter clock, regenerates ultra-low jitter digital signals, and thus achieves ultra-low digital output. The sound coming out is so full of details! Thats why.Bluetooth AsynchronousFPGA Regeneration Technology The X5s 8th Anniversary Edition is capable of all these: master-tape level music file playback, high definition Bluetooth receiving, and Bluetooth transmission. Play music files from your smartphone on the X5s 8th Anniversary Edition, it will become a digital transport with Bluetooth asynchronous FPGA technology, which can output signals via coaxial out, optical out and line out at the same time.Fully Isolated OutputZero Interference Digital output adopts professional fully isolated digital transformer, leading to purer digital signals with zero interference.Ultra-Low JitterMore Details The measurement of the digital signals via coaxial/optical output from the FPGA of our own algorithm is as low as 199ps. DoP coaxial output can support DSD 128 and 384k. The X5s 8th Anniversary Edition, your DAC’s ideal partner.Excellent Specs Digital output distortion: -141 dB, jitter: 199ps, line out noise: 4.6 µV, THD+N: -102 dB. Excellent specs is the basis of excellent sound.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

Like New, the product shown in the photo will be shipped as is.Check out the exterior through the attached photos.The product works fine as normal. PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better.Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical.Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding.Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music.GT Concept: We put our hearts in it. According to the BOM of the X1s GT, the whole device has 733 components and parts, among which, the headphone amp board has 277. The quiescent current reaches 700mA. Plus professional tuning. It’s a product special from the inside to the outside.

I bought my first USB DAC new in 2021. Iveadded some accessories to it, like a silver vertical metal stand and awell-liked Sparkos Discrete Op Amp SS3602, which is worth $75. Ive kept it ingood shape, and it comes in its original box. You can pick them up from the warehouse where I work, not from a home.

Downsizing my audio gear collection. This unit is barely used because I prefer the Ares II. I added the Sparkos ss3602 and swapped out the stock feet so it can stand without hitting the opamp. This is the best combination with added sense of resolution and airiness. Comes with stock opamps and a few others I purchased + opamp puller, opamp door + screws.

Vendo in condizioni come da foto DAC Aune S6 In condizioni ottime o pari al nuovo. Imballi originali. Spedizione a carico e sotto esclusiva responsabilità dellacquirente. Consegna a mano possibile su Roma previo accordo.

Aune x8 Magic DAC mit Sparkos SS 3602. Zustand: Der DAC wurde im Januar 2023 beim AUNEshop neu gekauft und ist aufgrund der kurzen Nutzungsdauer in einem Topzustand. Lediglich leichte Wischspuren vom Anfassen bzw Staubwischen ansonsten wie neu.Bei dem Gerät kann man den OP-Amp als Nutzer selbst auswechseln und dadurch den Klang an die vorh. Anlage etwas anpassen. Ich habe den Sparkos SS3602 eingesteckt, der hervorragend neutral und transparent.klingt. ( der kostet alleine schon 89.,- €, ist das Geld aber wert. ) Wer Infos dazu braucht: imYoutube-Kanal von Iiwi ist die Kombination beschrieben und sehr gut getestet worden. Durch die aufwändige größere Bauform steht dieser OpAmp etwa 3-4 mm über die Bodenplatte heraus. Daher habe ich 4 Filzgleiter auf der Bodenplatte angebracht als Höhenausgleich damit man das Gerät normal ins Regal stellen kann. Dieser DACklingt einiges besser als z. B der eingebaute DaC im Blusound node 2. Für das Geld eine Wucht. Mit dabei ist die OVP, Netzteil und Montagezange für den Austausch des OPAmp sowie die orig. Rechnungen von DAC und dem OpAmp Der Versand ist nur innerhalb Deutschland kostenlos, bei Versand ins Ausland kommen die anfallenden. Kosten für DHL auf den Preis drauf. Abholung des Gerätes mit Probehören ist mir aber generell lieber.