More search suggestions:

Amazon | audio data mignon (10) | audiomeca one (13) | audio engine a2 (20) | adamson (26) | audio engine a5 (37) | audio engine 3 (85) |

audioengine N22 Premium Desktop Audio Amplifier

End: 24.02. 2025 18:29:40 on Monday
  • Condition: Used
  • Price: 95.52 EUR Auktion
  • Status: unsold
  • Item number: 267162319841
  • Bids: 0
  • Seller: fongabonga (25|100.0%)
  • Seller information: non commercial
  • Item location: Seattle, Washington USA
  • Ships to: Worldwide
  • Shipping: 0,0 EUR
  • on EBAY
  • Description

    Great compact stereo amplifier that also doubles as a headphone amp. I bought this brand new and used it in a smoke free home. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectorspower-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D FeaturesDesktop: The audioengine N22 is a desktop amplifier with a headphone amp built in. There are two inputs, stereo RCA and stereo mini-jack, along with RCA preamp outputs and a 3.5mm headphone jack. USB Port: On the back of the amp there is a powered USB output. Its purpose is only to power or charge a USB bus-powered device; for example it will charge an iPod but not control the iPod, and the audio signal is not transferred through the USB port. Audioengine offers wireless adapters (item numbers 772AW1 and 772AW2, sold separately) that can be powered using this port. Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. The N22 has no input selector switch, so both inputs are live simultaneously; only one should be turned on at a time. Speaker Outputs: The speaker terminals 5-way binding posts; they will accept pin connectors, spade connectors, single and dual banana plugs, and bare wire up to 12 gauge. Preamp Output: The variable stereo RCA preamp output can be used to add an external amp, a powered subwoofer, or an audioengine wireless adapter (item numbers 772AW1 and 772AW2, sold separately). Volume Control: The rotary power/volume control is on the front panel. It controls the volume for the speaker level, preamp, and front panel headphone outputs; turn fully counterclockwise to turn the unit off. Headphone Output: A 3.5mm (1/8) headphone jack is on the amps front panel. The speaker and preamp outputs are automatically muted when headphones are plugged in. Rear Panel Connections: Power: DC input for use with included power supply; 17.5 volt/1.8 ampInput A: stereo RCAInput B: 3.5mm stereo mini-jackLine Output: stereo RCA; variable; muted when headphones are plugged inUSB Port: powered USB type A; output only (no audio input)Speaker Output: left and right 5-way binding post terminals; muted when headphones are plugged in

audioengine N22 Premium Desktop Audio Amplifier

End: 17.02. 2025 18:29:25 on Monday
  • Condition: Used
  • Price: 95.42 EUR Auktion
  • Status: unsold
  • Item number: 267151819340
  • Bids: 0
  • Seller: fongabonga (25|100.0%)
  • Seller information: non commercial
  • Item location: Seattle, Washington USA
  • Ships to: Worldwide
  • Shipping: 0,0 EUR
  • on EBAY
  • Description

    Great compact stereo amplifier that also doubles as a headphone amp. I bought this brand new and used it in a smoke free home. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectorspower-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D FeaturesDesktop: The audioengine N22 is a desktop amplifier with a headphone amp built in. There are two inputs, stereo RCA and stereo mini-jack, along with RCA preamp outputs and a 3.5mm headphone jack. USB Port: On the back of the amp there is a powered USB output. Its purpose is only to power or charge a USB bus-powered device; for example it will charge an iPod but not control the iPod, and the audio signal is not transferred through the USB port. Audioengine offers wireless adapters (item numbers 772AW1 and 772AW2, sold separately) that can be powered using this port. Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. The N22 has no input selector switch, so both inputs are live simultaneously; only one should be turned on at a time. Speaker Outputs: The speaker terminals 5-way binding posts; they will accept pin connectors, spade connectors, single and dual banana plugs, and bare wire up to 12 gauge. Preamp Output: The variable stereo RCA preamp output can be used to add an external amp, a powered subwoofer, or an audioengine wireless adapter (item numbers 772AW1 and 772AW2, sold separately). Volume Control: The rotary power/volume control is on the front panel. It controls the volume for the speaker level, preamp, and front panel headphone outputs; turn fully counterclockwise to turn the unit off. Headphone Output: A 3.5mm (1/8) headphone jack is on the amps front panel. The speaker and preamp outputs are automatically muted when headphones are plugged in. Rear Panel Connections: Power: DC input for use with included power supply; 17.5 volt/1.8 ampInput A: stereo RCAInput B: 3.5mm stereo mini-jackLine Output: stereo RCA; variable; muted when headphones are plugged inUSB Port: powered USB type A; output only (no audio input)Speaker Output: left and right 5-way binding post terminals; muted when headphones are plugged in

audioengine N22 Premium Desktop Audio Amplifier

End: 10.02. 2025 18:29:10 on Monday
  • Condition: Used
  • Price: 96.94 EUR Auktion
  • Status: unsold
  • Item number: 267144633913
  • Bids: 0
  • Seller: fongabonga (25|100.0%)
  • Seller information: non commercial
  • Item location: Seattle, Washington USA
  • Ships to: Worldwide
  • Shipping: 0,0 EUR
  • on EBAY
  • Description

    Great compact stereo amplifier that also doubles as a headphone amp. I bought this brand new and used it in a smoke free home. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectorspower-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D FeaturesDesktop: The audioengine N22 is a desktop amplifier with a headphone amp built in. There are two inputs, stereo RCA and stereo mini-jack, along with RCA preamp outputs and a 3.5mm headphone jack. USB Port: On the back of the amp there is a powered USB output. Its purpose is only to power or charge a USB bus-powered device; for example it will charge an iPod but not control the iPod, and the audio signal is not transferred through the USB port. Audioengine offers wireless adapters (item numbers 772AW1 and 772AW2, sold separately) that can be powered using this port. Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. The N22 has no input selector switch, so both inputs are live simultaneously; only one should be turned on at a time. Speaker Outputs: The speaker terminals 5-way binding posts; they will accept pin connectors, spade connectors, single and dual banana plugs, and bare wire up to 12 gauge. Preamp Output: The variable stereo RCA preamp output can be used to add an external amp, a powered subwoofer, or an audioengine wireless adapter (item numbers 772AW1 and 772AW2, sold separately). Volume Control: The rotary power/volume control is on the front panel. It controls the volume for the speaker level, preamp, and front panel headphone outputs; turn fully counterclockwise to turn the unit off. Headphone Output: A 3.5mm (1/8) headphone jack is on the amps front panel. The speaker and preamp outputs are automatically muted when headphones are plugged in. Rear Panel Connections: Power: DC input for use with included power supply; 17.5 volt/1.8 ampInput A: stereo RCAInput B: 3.5mm stereo mini-jackLine Output: stereo RCA; variable; muted when headphones are plugged inUSB Port: powered USB type A; output only (no audio input)Speaker Output: left and right 5-way binding post terminals; muted when headphones are plugged in

Audioengine N22 Integrated Amplifier

End: 07.02. 2025 19:44:31 on Friday
  • Condition: Used
  • Price: 86.53 EUR FESTPREIS
  • Status: sold
  • Item number: 226570837145
  • Seller: funmaster (1352|100.0%)
  • Seller information: non commercial
  • Item location: Los Angeles, California USA
  • Ships to: US
  • Shipping: 14,0 EUR
  • on EBAY
  • Description

    Good condition working desktop amplifier, no issues. Clean with no visible wear.

Audioengine N22 Gen 2 Integrated Desktop Amplifier with Bluetooth

End: 05.02. 2025 20:20:13 on Wednesday
  • Condition: Used
  • Price: 218.05 EUR FESTPREIS
  • Status: sold
  • Item number: 176754543215
  • Seller: world_wide_stereo_outlet (18704|99.5%)
  • Seller information: Commercial (with base shop)
  • Item location: Montgomeryville, Pennsylvania USA
  • Ships to: US
  • Shipping: 0,0 EUR
  • on EBAY
  • Description

    High-performance, low-noise discrete amplifier which works well with all types of headphones and earphones. Easily pair your devices via Bluetooth for wireless music streaming with high-quality audio. Exceptional sound reproduction with minimal distortion, thanks to the N22’s robust power output (22W RMS / 100W peak). Built-in power port for charging portable devices, while listening to your music. Powered by Frooition Payment & Returns Support Newsletter Home Audio Car Electronics Televisions and Video Portable Electronics Sale Audioengine N22 Gen 2 Integrated Desktop Amplifier with Bluetooth Product ID #: N222GENBLK USED / OPEN BOX Product Information Product Information About Us Payment Returns Shipping Product Information The N22 is an easy-to-use integrated amplifier that drives a wide range of speakers (and headphones) with authority and includes a number of inputs (analog input wireless capability) to seamlessly integrate your music sources with your speakers. Plus the N22s versatility extends to its seamless compatibility with Audioengines P4s or any legacy passive speakers of your choice.FeaturesBluetooth aptX ConnectivityUSB-C input from your computer tablet or phoneBuilt-in headphone amplifier and DAC for private listening sessionsInternal power supply for fewer wires and less clutterDurable hand-crafted real wood cabinetVersatility At Its Best N22 is a compact stereo-powered desktop and high-quality headphone amplifier with multiple inputs including (Bluetooth USB-C and Analog). Connect passive speakers a subwoofer or your favorite headphones to your phone computer turntable DAC or streaming device for a mini hi-fi music system.Powerful Performance With a robust power output power of 100W total peak and a high-performance headphone amplifier the N22 ensures exceptional sound reproduction with minimal distortion.What’s in the BoxN22 Gen 2 Integrated Desktop Amplifier with Bluetooth1/8th” Audio CableRCA Audio Calbe(2) Speaker Wires (16AWG)Cloth Amplifier BagCloth Cable BagManualSpecificationsType: Compact Integrated Stereo AmplifierPower output: 22W RMS / 100W peak channel (AES) @ 4ohmsAmplifier type: Dual Class D TDA 7492 amplifierInput voltages: 110-240V 50/60Hz auto-switchingInputs: RCA 1/8″ (3.5mm) mini-jack USB-COutputs: RCA variable preampSpeaker outputs: 5-way binding postsSNR: >95dB A-weightedTHD+N: <0.02% at all power settingsCrosstalk: -50dBFrequency response: 20Hz-22kHz ±1dBInput impedance: 10K ohms unbalancedInput sensitivity: 410mV (@max volume)Protection: Output current limiting thermal over-temperature power on/off transient protectionHeadphone amplifier: Burr-Brown/TI OPA2134Dimensions (W x H x D): 2.75″ x 7″ x 2.75″ x 5.5″Weight: 3.55 lbs. About Us About Us World Wide Stereo: Awe Inspired. Since 1979. For four decades, World Wide Stereo has delivered the worlds finest consumer electronics and home entertainment products . With two award winning stores, a brand new distribution center and one of the largest design and installation of Audio/Video departments in the country, we know what?s good and what?s not. We are very selective about what we sell, and we are an Authorized Reseller for every brand we represent. You can shop with confidence and know that you?re buying top-quality, new merchandise with a valid manufacturer?s warranty and best-in-class support. As a family-owned business, we live by our reputation for integrity, quality, personal service, and competitive pricing, striving to provide you with a superior experience. World Wide Stereo is proud to be named the Best of Philly Place for Home Gadgets by Philadelphia Magazine. World Wide Stereo has also received an Excellent Rating from STELLAService and top marks from the Better Business Bureau. Payment Payment Payment is required in full immediately upon winning an auction or selecting Buy It Now on an item. Orders where payment is not received within 24 hours can be cancelled for non-payment and the items may be relisted for sale by World Wide Stereo. We subscribe to eBay Payments for all all purchases through our eBay store. If you have any questions regarding your payment please contact eBay. We only ship to the confirmed US Address associated with your tarnsaction. We cannot edit the shipping address after the checkout is complete. Returns Returns As an authorized dealer, we are proud to offer manufacturers warranties with your purchase. Please contact us for a copy of your authorized dealer receipt if a warranty claim is needed. 30-Day Money-Back Guarantee: The quality of our products and your happiness is guaranteed. If you are not satisfied with your purchase, you may return eligible items* in their original condition and packaging within 30 days of receipt of your shipment.The buyer is responsible for all return shipping costs and fees.. Start your return by sending us an ebay message or by opening a return request in eBay. A partial refund may be given or the return may be refused in the event merchandise is not returned in its original condition, is missing any accessories, or missing the manufacturer packaging. Freight & Oversize items: Items fulfilled via free scheduled delivery/specialty motor freight that require special shipping are not returnable. What if my product arrives damaged? Please message us right away through eBay. Take pics of any damage including the ite, box, and shipping label. Shipping damage must be reported within 2 business days of delivery to ensure a refund can be issued. What if my product is defective? Eligible products that are deemed to be defective during our 30 day guarantee may be returned for a refund. Certain products, like larger TVs, will require the manufacturer to schedule a service call or appointment with you in order to arrange service. If your defective item is past the 30 day return window it will revert to the manufacturer warranty. We are happy to help provide the documnetation necessary for a warranty claim. If an item is returned as defective and is deemed not defective the cost of the return label and a restocking fee will be deducted from the refund. Return Fees: Freight & Oversize Return Fee: We do not accept returns that were shipped via freight services. Restocking Fee: A partial refund may be given or the return may be refused in the event merchandise is not returned in its original condition or packaging, was previously installed, is missing parts, cables cut or terminated, has a missing or different serial number from the one shipped, or is damaged during return shipment due to improper packing. Refused Shipments: Packages refused for any reason other than shipping damages will be subject to return fees. Packages not wanted should be accepted and then a return request opened in eBay. Shipping Shipping We offer FREE shipping on all orders within the Contiguous United States. We do not ship outside the Contiguous United States. There is no shipping to Alaska, Hawaii, or Puerto Rico. We do not offer any kind of expedited shipping services. Please verify your shipping address prior to checkout as we are unable to make any changes once checkout is complete. Higher value orders may require an adult signature at delivery. Orders are processed by our warehouse within 1-2 business days. Orders are estimated to arrive within 3-9 business days depending on the carrier and the buyer location. (Weekends and holidays do not count as business days). Please keep in mind that adverse weather conditions, remote delivery locations and carrier delay could cause your actual delivery time to be slightly longer. Our warehouses, shipping carriers and customer contact center are closed on major holidays. You will receive an email confirmation of your order within 24 hours of placing your order and an additional email confirmation with tracking information once your order has been shipped. More Items! View more great items! Powered by Frooition Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

audioengine N22 Premium Desktop Audio Amplifier

End: 03.02. 2025 18:28:51 on Monday
  • Condition: Used
  • Price: 96.95 EUR Auktion
  • Status: unsold
  • Item number: 267137794636
  • Bids: 0
  • Seller: fongabonga (25|100.0%)
  • Seller information: non commercial
  • Item location: Seattle, Washington USA
  • Ships to: Worldwide
  • Shipping: 0,0 EUR
  • on EBAY
  • Description

    Great compact stereo amplifier that also doubles as a headphone amp. I bought this brand new and used it in a smoke free home. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectorspower-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D FeaturesDesktop: The audioengine N22 is a desktop amplifier with a headphone amp built in. There are two inputs, stereo RCA and stereo mini-jack, along with RCA preamp outputs and a 3.5mm headphone jack. USB Port: On the back of the amp there is a powered USB output. Its purpose is only to power or charge a USB bus-powered device; for example it will charge an iPod but not control the iPod, and the audio signal is not transferred through the USB port. Audioengine offers wireless adapters (item numbers 772AW1 and 772AW2, sold separately) that can be powered using this port. Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. The N22 has no input selector switch, so both inputs are live simultaneously; only one should be turned on at a time. Speaker Outputs: The speaker terminals 5-way binding posts; they will accept pin connectors, spade connectors, single and dual banana plugs, and bare wire up to 12 gauge. Preamp Output: The variable stereo RCA preamp output can be used to add an external amp, a powered subwoofer, or an audioengine wireless adapter (item numbers 772AW1 and 772AW2, sold separately). Volume Control: The rotary power/volume control is on the front panel. It controls the volume for the speaker level, preamp, and front panel headphone outputs; turn fully counterclockwise to turn the unit off. Headphone Output: A 3.5mm (1/8) headphone jack is on the amps front panel. The speaker and preamp outputs are automatically muted when headphones are plugged in. Rear Panel Connections: Power: DC input for use with included power supply; 17.5 volt/1.8 ampInput A: stereo RCAInput B: 3.5mm stereo mini-jackLine Output: stereo RCA; variable; muted when headphones are plugged inUSB Port: powered USB type A; output only (no audio input)Speaker Output: left and right 5-way binding post terminals; muted when headphones are plugged in

Audioengine N22 Premium Desktop Audio Amplifier

End: 30.01. 2025 20:20:18 on Thursday
  • Condition: Used
  • Price: 119.83 EUR Auktion
  • Status: unsold
  • Item number: 276827676290
  • Bids: 0
  • Seller: bohemiangrk (551|100.0%)
  • Seller information: non commercial
  • Item location: Derwood, Maryland USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    I do not have the box or papers but it will be packed well. It works and looks great. Comes with power cord. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectors (pair of 5.75-foot speaker wires included)power-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D

Audioengine N22 (Gen 1) Integrated Amplifier

End: 29.01. 2025 22:57:48 on Wednesday
  • Condition: Used
  • Price: 114.78 EUR FESTPREIS
  • Status: sold
  • Item number: 306058372931
  • Seller: motorcityinmotion (44|100.0%)
  • Seller information: non commercial
  • Item location: Flat Rock, Michigan USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    Full Description From Audioengine: Description Fitting easily on your desk or in tight spaces, the Audioengine N22 Desktop Amplifiers upright design also has function benefits. Since this amp rests vertically on an integrated stand, its able to cool itself through passive convection without the need for a fan or heatsink. Visually, the N22 looks other worldly, but using it is as familiar as it gets. The front panel has only an integrated on/off switch, headphone jack and one simple analog volume control; nothing else to figure out. Headphone enthusiasts should know that the N22 includes a high-performance, low-noise discrete amplifier which works well with all types of headphones and earphones. Around back of the N22, users can choose from two inputs. There is an RCA and a 3.5mm mini-jack input, as well as a variable preamp line-out. Both inputs are active and require no input switch. You can charge iPods and other similar products from the USB power port or you can use the USB port to power Audioengine wireless adapters, which make it possible to stream music wirelessly from your computer or iPod. For speaker hook-up, you have front / rear channels with left / right 5-way, gold-plated binding post connections. This amp makes sense if youre looking for more power in a smaller size. Connect your iPod, computer, and speakers or headphones for a great-sounding personal stereo system. Even a subwoofer can be added to the system. Plus, all Audioengine speakers and amplifiers share a similar voicing and tuning, so youll be assured a matched system no matter which of their products you decide to add to your amplifier. Upright Design With a satin-black finish and integrated stand to keep the N22 upright, Audioengine combines looks and performance. The unique upright design cools down the N22 with passive convection instead of using fans or heatsinks. It also can easily fit in tighter spaces for added convenience. Perfectly suited for your desktop or a smaller space in your home or office, the N22 is easy to connect to your Mac or PC with no software to install or settings to change. Discrete Headphone Amplifier For headphone enthusiasts the N22 includes a high-performance, low-noise discrete amplifier which works well with all types of headphones and earphones Standby Idle A standby idle mode is included to conserve power when youre not playing music. Active Audio Inputs Both audio inputs on the N22 are active, so two audio sources may be connected to the amplifier at the same time without the need for an input switch. You can choose between an RCA and a 3.5mm mini-jack. USB Charge / Power Port Theres a built-in power port for iPod charging while listening to your music. The USB connector allows you to charge and power your iPod, iPhone, Audioengine wireless adapters or any other USB powered product. USB is for power only, not audio or data transfer. Wireless Ready The USB port can also power Audioengines wireless adapters to stream your music wirelessly from your computer or iPod. Audioengine Sound Closing the gap between computer and home audio, all Audioengine speakers and amplifiers share a similar voicing and tuning, so that you are assured a matched system no matter which of their products you decide to add to your system. SPECIFICATIONS: Amplifier Amplifier Type Integrated Amplifier (Preamp/Power Amp Combo)Channels 2.0Power Output per Channel 22 W (RMS) 40 W (Peak)Frequency Response 20 Hz to 22 kHz ±1 dBTHD 95 dB (A-Weighted)Wireless ConnectivityWi-Fi NoneBluetooth None Power AC Input Power110 to 240 VAC, 50 / 60 Hz Physical Dimensions (W x H x D) 2.8 x 7.0 x 5.5 / 7.0 x 17.8 x 14.0 cmWeight 3.55 lb / 1.6 kg Packaging Info Package Weight 5.305 lbBox Dimensions (LxWxH) 9.85 x 9.55 x 6.35 This unit is lightly used and comes with the original packaging and all accessories.

Audioengine N22 Integrated Amplifier Gen 1

End: 28.01. 2025 23:15:22 on Tuesday
  • Condition: Used
  • Price: 48.92 EUR Auktion
  • Status: sold
  • Item number: 235920268272
  • Bids: 2
  • Seller: kevinwinstonshen (551|100.0%)
  • Seller information: non commercial
  • Item location: Maryland Heights, Missouri USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    The Audioengine N22 Gen 1 is a great compact stereo amplifier that also doubles as a headphone amp. This item comes only with the AC Adapter. No accessories are being sold with it. What is seen in the pictures are what are included. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectorspower-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D FeaturesDesktop: The audioengine N22 is a desktop amplifier with a headphone amp built in. There are two inputs, stereo RCA and stereo mini-jack, along with RCA preamp outputs and a 3.5mm headphone jack. USB Port: On the back of the amp there is a powered USB output. Its purpose is only to power or charge a USB bus-powered device; for example it will charge an iPod but not control the iPod, and the audio signal is not transferred through the USB port. Audioengine offers wireless adapters (item numbers 772AW1 and 772AW2, sold separately) that can be powered using this port. Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. The N22 has no input selector switch, so both inputs are live simultaneously; only one should be turned on at a time. Speaker Outputs: The speaker terminals 5-way binding posts; they will accept pin connectors, spade connectors, single and dual banana plugs, and bare wire up to 12 gauge. Preamp Output: The variable stereo RCA preamp output can be used to add an external amp, a powered subwoofer, or an audioengine wireless adapter (item numbers 772AW1 and 772AW2, sold separately). Volume Control: The rotary power/volume control is on the front panel. It controls the volume for the speaker level, preamp, and front panel headphone outputs; turn fully counterclockwise to turn the unit off. Headphone Output: A 3.5mm (1/8) headphone jack is on the amps front panel. The speaker and preamp outputs are automatically muted when headphones are plugged in. Rear Panel Connections: Power: DC input for use with included power supply; 17.5 volt/1.8 ampInput A: stereo RCAInput B: 3.5mm stereo mini-jackLine Output: stereo RCA; variable; muted when headphones are plugged inUSB Port: powered USB type A; output only (no audio input)Speaker Output: left and right 5-way binding post terminals; muted when headphones are plugged in

audioengine N22 Premium Desktop Audio Amplifier

End: 27.01. 2025 18:28:19 on Monday
  • Condition: Used
  • Price: 95.25 EUR Auktion
  • Status: unsold
  • Item number: 267130782562
  • Bids: 0
  • Seller: fongabonga (25|100.0%)
  • Seller information: non commercial
  • Item location: Seattle, Washington USA
  • Ships to: Worldwide
  • Shipping: 0,0 EUR
  • on EBAY
  • Description

    Great compact stereo amplifier that also doubles as a headphone amp. I bought this brand new and used it in a smoke free home. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectorspower-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D FeaturesDesktop: The audioengine N22 is a desktop amplifier with a headphone amp built in. There are two inputs, stereo RCA and stereo mini-jack, along with RCA preamp outputs and a 3.5mm headphone jack. USB Port: On the back of the amp there is a powered USB output. Its purpose is only to power or charge a USB bus-powered device; for example it will charge an iPod but not control the iPod, and the audio signal is not transferred through the USB port. Audioengine offers wireless adapters (item numbers 772AW1 and 772AW2, sold separately) that can be powered using this port. Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. The N22 has no input selector switch, so both inputs are live simultaneously; only one should be turned on at a time. Speaker Outputs: The speaker terminals 5-way binding posts; they will accept pin connectors, spade connectors, single and dual banana plugs, and bare wire up to 12 gauge. Preamp Output: The variable stereo RCA preamp output can be used to add an external amp, a powered subwoofer, or an audioengine wireless adapter (item numbers 772AW1 and 772AW2, sold separately). Volume Control: The rotary power/volume control is on the front panel. It controls the volume for the speaker level, preamp, and front panel headphone outputs; turn fully counterclockwise to turn the unit off. Headphone Output: A 3.5mm (1/8) headphone jack is on the amps front panel. The speaker and preamp outputs are automatically muted when headphones are plugged in. Rear Panel Connections: Power: DC input for use with included power supply; 17.5 volt/1.8 ampInput A: stereo RCAInput B: 3.5mm stereo mini-jackLine Output: stereo RCA; variable; muted when headphones are plugged inUSB Port: powered USB type A; output only (no audio input)Speaker Output: left and right 5-way binding post terminals; muted when headphones are plugged in

Audioengine N22 Integrated Amplifier Gen 1

End: 25.01. 2025 21:15:59 on Saturday
  • Condition: Used
  • Price: 116.56 EUR FESTPREIS
  • Status: sold
  • Item number: 235920263312
  • Seller: kevinwinstonshen (565|100.0%)
  • Seller information: non commercial
  • Item location: Maryland Heights, Missouri USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    The Audioengine N22 Gen 1 is a great compact stereo amplifier that also doubles as a headphone amp. This item comes with all of the original packaging materials and accessories. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectorspower-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D FeaturesDesktop: The audioengine N22 is a desktop amplifier with a headphone amp built in. There are two inputs, stereo RCA and stereo mini-jack, along with RCA preamp outputs and a 3.5mm headphone jack. USB Port: On the back of the amp there is a powered USB output. Its purpose is only to power or charge a USB bus-powered device; for example it will charge an iPod but not control the iPod, and the audio signal is not transferred through the USB port. Audioengine offers wireless adapters (item numbers 772AW1 and 772AW2, sold separately) that can be powered using this port. Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. The N22 has no input selector switch, so both inputs are live simultaneously; only one should be turned on at a time. Speaker Outputs: The speaker terminals 5-way binding posts; they will accept pin connectors, spade connectors, single and dual banana plugs, and bare wire up to 12 gauge. Preamp Output: The variable stereo RCA preamp output can be used to add an external amp, a powered subwoofer, or an audioengine wireless adapter (item numbers 772AW1 and 772AW2, sold separately). Volume Control: The rotary power/volume control is on the front panel. It controls the volume for the speaker level, preamp, and front panel headphone outputs; turn fully counterclockwise to turn the unit off. Headphone Output: A 3.5mm (1/8) headphone jack is on the amps front panel. The speaker and preamp outputs are automatically muted when headphones are plugged in. Rear Panel Connections: Power: DC input for use with included power supply; 17.5 volt/1.8 ampInput A: stereo RCAInput B: 3.5mm stereo mini-jackLine Output: stereo RCA; variable; muted when headphones are plugged inUSB Port: powered USB type A; output only (no audio input)Speaker Output: left and right 5-way binding post terminals; muted when headphones are plugged in

Audioengine N22 Premium Desktop Audio Amplifier

End: 23.01. 2025 20:20:02 on Thursday
  • Condition: Used
  • Price: 120.22 EUR Auktion
  • Status: unsold
  • Item number: 276818761942
  • Bids: 0
  • Seller: bohemiangrk (550|100.0%)
  • Seller information: non commercial
  • Item location: Derwood, Maryland USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    I do not have the box or papers but it will be packed well. It works and looks great. Comes with power cord. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectors (pair of 5.75-foot speaker wires included)power-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D

audioengine N22 Premium Desktop Audio Amplifier

End: 21.01. 2025 18:06:56 on Tuesday
  • Condition: Used
  • Price: 48.19 EUR FESTPREIS
  • Status: unsold
  • Item number: 156634004623
  • Seller: dikshantad (109|100.0%)
  • Seller information: non commercial
  • Item location: Jersey City, New Jersey USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    Used Audioengine N22 in fair condition. Has some scratches but device works as expected. The volume knob feel is a bit scratchy but doesn’t affect audio. Stand has missing screws. Comes with original power adapter and a generic box.

audioengine N22 Premium Desktop Audio Amplifier

End: 20.01. 2025 18:28:07 on Monday
  • Condition: Used
  • Price: 96.15 EUR Auktion
  • Status: unsold
  • Item number: 267124108658
  • Bids: 0
  • Seller: fongabonga (25|100.0%)
  • Seller information: non commercial
  • Item location: Seattle, Washington USA
  • Ships to: Worldwide
  • Shipping: 0,0 EUR
  • on EBAY
  • Description

    Great compact stereo amplifier that also doubles as a headphone amp. I bought this brand new and used it in a smoke free home. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectorspower-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D FeaturesDesktop: The audioengine N22 is a desktop amplifier with a headphone amp built in. There are two inputs, stereo RCA and stereo mini-jack, along with RCA preamp outputs and a 3.5mm headphone jack. USB Port: On the back of the amp there is a powered USB output. Its purpose is only to power or charge a USB bus-powered device; for example it will charge an iPod but not control the iPod, and the audio signal is not transferred through the USB port. Audioengine offers wireless adapters (item numbers 772AW1 and 772AW2, sold separately) that can be powered using this port. Inputs: There are two analog inputs, stereo RCAs and a 3.5mm stereo mini-jack, both on the rear panel. The N22 has no input selector switch, so both inputs are live simultaneously; only one should be turned on at a time. Speaker Outputs: The speaker terminals 5-way binding posts; they will accept pin connectors, spade connectors, single and dual banana plugs, and bare wire up to 12 gauge. Preamp Output: The variable stereo RCA preamp output can be used to add an external amp, a powered subwoofer, or an audioengine wireless adapter (item numbers 772AW1 and 772AW2, sold separately). Volume Control: The rotary power/volume control is on the front panel. It controls the volume for the speaker level, preamp, and front panel headphone outputs; turn fully counterclockwise to turn the unit off. Headphone Output: A 3.5mm (1/8) headphone jack is on the amps front panel. The speaker and preamp outputs are automatically muted when headphones are plugged in. Rear Panel Connections: Power: DC input for use with included power supply; 17.5 volt/1.8 ampInput A: stereo RCAInput B: 3.5mm stereo mini-jackLine Output: stereo RCA; variable; muted when headphones are plugged inUSB Port: powered USB type A; output only (no audio input)Speaker Output: left and right 5-way binding post terminals; muted when headphones are plugged in

Audioengine N22 Premium Desktop Audio Amplifier

End: 16.01. 2025 20:19:48 on Thursday
  • Condition: Used
  • Price: 121.35 EUR Auktion
  • Status: unsold
  • Item number: 276810938641
  • Bids: 0
  • Seller: bohemiangrk (549|100.0%)
  • Seller information: non commercial
  • Item location: Derwood, Maryland USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    I do not have the box or papers but it will be packed well. It works and looks great. Comes with power cord. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectors (pair of 5.75-foot speaker wires included)power-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D

Audioengine N22 Premium Desktop Audio Amplifier

End: 09.01. 2025 20:19:27 on Thursday
  • Condition: Used
  • Price: 121.37 EUR Auktion
  • Status: unsold
  • Item number: 276801802217
  • Bids: 0
  • Seller: bohemiangrk (549|100.0%)
  • Seller information: non commercial
  • Item location: Derwood, Maryland USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    I do not have the box or papers but it will be packed well. It works and looks great. Comes with power cord. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectors (pair of 5.75-foot speaker wires included)power-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D

Audioengine N22 Premium Desktop Audio Amplifier

End: 02.01. 2025 20:19:15 on Thursday
  • Condition: Used
  • Price: 121.65 EUR Auktion
  • Status: unsold
  • Item number: 276793584454
  • Bids: 0
  • Seller: bohemiangrk (549|100.0%)
  • Seller information: non commercial
  • Item location: Derwood, Maryland USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    I do not have the box or papers but it will be packed well. It works and looks great. Comes with power cord. Specifications:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputs5-way binding post speaker connectors (pair of 5.75-foot speaker wires included)power-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8D

Audioengine N22 Integrated Amplifier Gen 1 - All Original Accessories Included

End: 08.12. 2024 19:12:39 on Sunday
  • Condition: Used
  • Price: 125.38 EUR FESTPREIS
  • Status: sold
  • Item number: 235856436534
  • Seller: px_seattle (100|100.0%)
  • Seller information: non commercial
  • Item location: Redmond, Washington USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    The Audioengine N22 Integrated Amplifier Gen 1 is a high-quality device designed to enhance your home listening experience. With its RCA audio outputs, this amplifier offers exceptional sound quality, making it ideal for music enthusiasts. The brand, Audioengine, is known for its durable and reliable products, and this model is no exception. The Audioengine N22 is a perfect fit for those looking for a versatile and powerful integrated amplifier. It is designed to handle all your audio needs with ease, whether you are watching movies or listening to your favorite music. This device is a must-have for any home audio setup and is sure to impress.

Audioengine N22 Integrated Amplifier Gen 1

End: 25.11. 2024 23:05:35 on Monday
  • Condition: Used
  • Price: 118.33 EUR FESTPREIS
  • Status: sold
  • Item number: 276716534419
  • Seller: gpunique (1044|100.0%)
  • Seller information: non commercial
  • Item location: San Francisco, California USA
  • Ships to: US
  • Shipping: 12,0 EUR
  • on EBAY
  • Description

    My amp is in wonderful shape and I have enjoyed using it. Photos show every angle of its condition and besides a tiny amount of scuff on the volume knob, it looks wonderful. Comes with: -N22 Gen 1 Desktop Amp-Power supply with attached 6 DC output cord (17.5 volt/1.8 amp)6 AC power cordTwo Speaker wires (and a bit of spare)78 Stereo mini-jack cable (3.5mm stereo mini-jack connector on each end)Cloth drawstring cable bagCloth drawstring power supply bagCloth drawstring amplifier bag Conventional wisdom says audio components must measure 17 wide. Audioengine has a better idea. The narrow, vertically oriented N22 amplifier fits easily on your desk, bookshelf, or kitchen counter.Dont let its compact dimensions or unusual shape fool you. This amp delivers 22 legitimate watts per channel, enough to drive most bookshelf speakers to very satisfying volume levels in a small room. If youre sitting at your computer, with your speakers an arms length away, youll have power to burn.When the babys asleep, and you just cant crank your speakers, plug in a set of hi-fi headphones. The N22s high-performance, low-noise headphone amplifier will make them sing.The N22 is refreshingly simple to set up and operate. You get inputs for two analog audio sources and one knob for power and volume. Thats it. If youre storing all of your music on a computer or an iPod®, what else do you need? A built-in USB power port lets you charge your iPod while you listen to your music. (The USB port is for power only, not USB audio or data transfer.)The N22 includes a preamp output, so you can easily connect a powered subwoofer or Audioengine W3 wireless adapter.Both audio inputs on the N22 are always on. Theres no need for an input selection switch. The standby idle mode conserves power when youre not playing music.Need speakers, too? The N22 is a perfect match with Audioengines P4 passive bookshelf speakers.Product highlights:22 watts x 2 channels into 8 ohms (20-22,000 Hz) at 0.02% THDbuilt-in high-performance headphone amplifier1 pair RCA analog audio inputs3.5mm stereo minijack audio input1 pair RCA analog audio outputsUSB charge/power port5-way binding post speaker connectors power-saving idle modedetachable power cord4-1/16W x 7-1/4H x 7-5/8Dweight: 3.5 lbs.Model N22B

Audioengine A2 / N22 power supply - Audio Engine

End: 27.10. 2024 14:30:13 on Sunday
  • Condition: Used
  • Price: 36.82 EUR FESTPREIS
  • Status: sold
  • Item number: 256550397432
  • Seller: rebooting_tech (857|100.0%)
  • Seller information: non commercial
  • Item location: Nampa, Idaho USA
  • Ships to: US
  • Shipping: 5,05 EUR
  • on EBAY
  • Description

    Check seller feedback rating (currently 847+ all positive) and purchase with confidence. Thank you!

Audioengine N22 Integrated Amplifier Gen 1

End: 16.10. 2024 11:27:16 on Wednesday
  • Condition: Used
  • Price: 123.92 EUR FESTPREIS
  • Status: sold
  • Item number: 226398999444
  • Seller: jlt2001 (436|100.0%)
  • Seller information: non commercial
  • Item location: Mitchell, South Dakota USA
  • Ships to: US
  • Shipping: 0,0 EUR
  • on EBAY
  • Description

    Works like new. Upgraded to larger amp. Zero issues. Shipping to continental US only.

Audioengine N22 Integrated Amplifier Gen 1 Used No Power Plug As Is More InStore

End: 08.10. 2024 01:46:39 on Tuesday
  • Condition: For parts or not working
  • Price: 5.09 EUR Auktion
  • Status: sold
  • Item number: 126699899467
  • Bids: 3
  • Seller: brklyndreamer2345 (2082|99.7%)
  • Seller information: Commercial (with base shop)
  • Item location: Ocala, Florida USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    This Audioengine N22 Integrated Amplifier Gen 1 is the perfect addition to any home audio system. With its sleek black design, it is sure to blend in seamlessly with any decor. This amp has RCA audio outputs and is ideal for use with consumer electronics, TVs, and home audio systems. It is a great choice for those who are looking for a high-quality and reliable integrated amplifier. This is amazing it did work at one time last year for a while in college since I moved I lost the power plug so this is as is what you seen in the picture is what you get again no power plug please look at all pictures and check out my store tons of great items toys video games vintage clothing and more.. Again no power plug

Audioengine N22 Integrated Amplifier Gen 1

End: 07.08. 2024 16:33:06 on Wednesday
  • Condition: Used
  • Price: 67.09 EUR FESTPREIS
  • Status: sold
  • Item number: 266902545873
  • Seller: a_drumma (56|100.0%)
  • Seller information: non commercial
  • Item location: Sea Cliff, New York USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    Little handy desk top amp... Works fine, just wound up with powered speakers and gotta make room! I never keep the original boxes, so Ill pack it up good.

Audioengine N22 Desktop Amplifier

End: 03.08. 2024 19:17:06 on Saturday
  • Condition: Used
  • Price: 54.7 EUR Auktion
  • Status: sold
  • Item number: 375559653163
  • Bids: 8
  • Seller: stehage-7027 (17|100.0%)
  • Seller information: non commercial
  • Item location: Fairborn, Ohio USA
  • Ships to: US
  • Shipping: EUR
  • on EBAY
  • Description

    Desktop amp in very good condition with all original packaging, manual, cables, power supply. Also included is a Bluetooth receiver transmitter. This model does not come with bt. There are two scratches on top right front and back. Looks like new otherwise.