| audio research ls 24 (6) | audio research ls-27 (7) | audio research ls 14 (7) | audio research ls17se (8) | audio research ls-22 (8) | audio research ls27 (11) |
Everything works as intended Specifications: FREQUENCY RESPONSE: +0-3dB, 0.2Hz to 160kHz at rated output (Balanced, 200k ohms load) DISTORTION: Less than .01% at 2V RMS BAL output. GAIN: Main output: Selectable for each input: 24dB, 18dB,12dB Balanced output. (18dB, 12dB, 6dB SE output.)Record output: 0dB (Processor input: 0dB balanced). INPUT IMPEDANCE: 120K ohms Balanced, 60K ohms SE. Inputs (8): Tuner, Phono, CD, Video, Aux 1, Aux 2, Moni- tor, Processor (XLR and RCA connectors). OUTPUT IMPEDANCE: 700 ohms Balanced, 350 ohms SE Main (2), 20K ohms minimum load and 2000pF maximum capacitance. Outputs (3): 2 Main, 1 Record (XLR and RCA connectors ). OUTPUT POLARITY: Non-inverting. MAXIMUM INPUT: Low Gain: 48V RMS BAL, 24V RMS SE, Medium Gain: 24V RMS BAL, 12V RMS SE, High Gain: 12V RMS BAL, 6V RMS SE. RATED OUTPUTS: 2V RMS 1Hz to 100kHz into 200K ohm balanced load (maximum balanced output capability is 15V RMS at less than 0.5% THD at 1kHz). CONTROLS: Rotary volume selector (104 steps) and rotary input selector.Push buttons: Power, Mono, BAL / SE, Proc, Monitor, Mute. Also remote buttons: Display, Bal L, Bal R, Hours, Invert, Gain. POWER SUPPLIES: Electronically-regulated low and high voltage supplies. Automatic 50 sec. warm-up/brown-out mute. Line regulation better than .01%. NOISE: 1.3uV RMS residual IHF weighted balanced equivalent input noise with volume at 1 (100dB below 2V RMS output). TUBE COMPLEMENT: 2-6H30P dual triode, (Hybrid JFET/ tube audio circuit, solid-state power supply.) POWER REQUIREMENTS: 105-130VAC 60Hz (210- 260VAC 50/60Hz) 50 watts maximum. DIMENSIONS: 19 (48 cm) W x 5.25 (13.4 cm) H (standard rack panel) x 13.3 (33.8 cm) D. Handles extend 1.50 (3.8 cm) forward of the front panel. Important Note on Shipping: eBay estimates of shipping costs are not accurate and do not include insurance or adult signature requirement. Please contact us for a more accurate quote. No shipping to Vietnam, China or Hong Kong.Please do not submit payment until you have received an invoice from us with accurate shipping costs. We reserve the right to hold the item or cancel the transaction if actual shipping costs are not paid.
Everything works as intended Specifications: FREQUENCY RESPONSE: +0-3dB, 0.2Hz to 160kHz at rated output (Balanced, 200k ohms load) DISTORTION: Less than .01% at 2V RMS BAL output. GAIN: Main output: Selectable for each input: 24dB, 18dB,12dB Balanced output. (18dB, 12dB, 6dB SE output.)Record output: 0dB (Processor input: 0dB balanced). INPUT IMPEDANCE: 120K ohms Balanced, 60K ohms SE. Inputs (8): Tuner, Phono, CD, Video, Aux 1, Aux 2, Moni- tor, Processor (XLR and RCA connectors). OUTPUT IMPEDANCE: 700 ohms Balanced, 350 ohms SE Main (2), 20K ohms minimum load and 2000pF maximum capacitance. Outputs (3): 2 Main, 1 Record (XLR and RCA connectors ). OUTPUT POLARITY: Non-inverting. MAXIMUM INPUT: Low Gain: 48V RMS BAL, 24V RMS SE, Medium Gain: 24V RMS BAL, 12V RMS SE, High Gain: 12V RMS BAL, 6V RMS SE. RATED OUTPUTS: 2V RMS 1Hz to 100kHz into 200K ohm balanced load (maximum balanced output capability is 15V RMS at less than 0.5% THD at 1kHz). CONTROLS: Rotary volume selector (104 steps) and rotary input selector.Push buttons: Power, Mono, BAL / SE, Proc, Monitor, Mute. Also remote buttons: Display, Bal L, Bal R, Hours, Invert, Gain. POWER SUPPLIES: Electronically-regulated low and high voltage supplies. Automatic 50 sec. warm-up/brown-out mute. Line regulation better than .01%. NOISE: 1.3uV RMS residual IHF weighted balanced equivalent input noise with volume at 1 (100dB below 2V RMS output). TUBE COMPLEMENT: 2-6H30P dual triode, (Hybrid JFET/ tube audio circuit, solid-state power supply.) POWER REQUIREMENTS: 105-130VAC 60Hz (210- 260VAC 50/60Hz) 50 watts maximum. DIMENSIONS: 19 (48 cm) W x 5.25 (13.4 cm) H (standard rack panel) x 13.3 (33.8 cm) D. Handles extend 1.50 (3.8 cm) forward of the front panel. Important Note on Shipping: eBay estimates of shipping costs are not accurate and do not include insurance or adult signature requirement. Please contact us for a more accurate quote. No shipping to Vietnam, China or Hong Kong.Please do not submit payment until you have received an invoice from us with accurate shipping costs. We reserve the right to hold the item or cancel the transaction if actual shipping costs are not paid.
Everything works as intended Specifications: FREQUENCY RESPONSE: +0-3dB, 0.2Hz to 160kHz at rated output (Balanced, 200k ohms load) DISTORTION: Less than .01% at 2V RMS BAL output. GAIN: Main output: Selectable for each input: 24dB, 18dB,12dB Balanced output. (18dB, 12dB, 6dB SE output.)Record output: 0dB (Processor input: 0dB balanced). INPUT IMPEDANCE: 120K ohms Balanced, 60K ohms SE. Inputs (8): Tuner, Phono, CD, Video, Aux 1, Aux 2, Moni- tor, Processor (XLR and RCA connectors). OUTPUT IMPEDANCE: 700 ohms Balanced, 350 ohms SE Main (2), 20K ohms minimum load and 2000pF maximum capacitance. Outputs (3): 2 Main, 1 Record (XLR and RCA connectors ). OUTPUT POLARITY: Non-inverting. MAXIMUM INPUT: Low Gain: 48V RMS BAL, 24V RMS SE, Medium Gain: 24V RMS BAL, 12V RMS SE, High Gain: 12V RMS BAL, 6V RMS SE. RATED OUTPUTS: 2V RMS 1Hz to 100kHz into 200K ohm balanced load (maximum balanced output capability is 15V RMS at less than 0.5% THD at 1kHz). CONTROLS: Rotary volume selector (104 steps) and rotary input selector.Push buttons: Power, Mono, BAL / SE, Proc, Monitor, Mute. Also remote buttons: Display, Bal L, Bal R, Hours, Invert, Gain. POWER SUPPLIES: Electronically-regulated low and high voltage supplies. Automatic 50 sec. warm-up/brown-out mute. Line regulation better than .01%. NOISE: 1.3uV RMS residual IHF weighted balanced equivalent input noise with volume at 1 (100dB below 2V RMS output). TUBE COMPLEMENT: 2-6H30P dual triode, (Hybrid JFET/ tube audio circuit, solid-state power supply.) POWER REQUIREMENTS: 105-130VAC 60Hz (210- 260VAC 50/60Hz) 50 watts maximum. DIMENSIONS: 19 (48 cm) W x 5.25 (13.4 cm) H (standard rack panel) x 13.3 (33.8 cm) D. Handles extend 1.50 (3.8 cm) forward of the front panel. Important Note on Shipping: eBay estimates of shipping costs are not accurate and do not include insurance or adult signature requirement. Please contact us for a more accurate quote. No shipping to Vietnam, China or Hong Kong.Please do not submit payment until you have received an invoice from us with accurate shipping costs. We reserve the right to hold the item or cancel the transaction if actual shipping costs are not paid.
Everything works as intended Specifications: FREQUENCY RESPONSE: +0-3dB, 0.2Hz to 160kHz at rated output (Balanced, 200k ohms load) DISTORTION: Less than .01% at 2V RMS BAL output. GAIN: Main output: Selectable for each input: 24dB, 18dB,12dB Balanced output. (18dB, 12dB, 6dB SE output.)Record output: 0dB (Processor input: 0dB balanced). INPUT IMPEDANCE: 120K ohms Balanced, 60K ohms SE. Inputs (8): Tuner, Phono, CD, Video, Aux 1, Aux 2, Moni- tor, Processor (XLR and RCA connectors). OUTPUT IMPEDANCE: 700 ohms Balanced, 350 ohms SE Main (2), 20K ohms minimum load and 2000pF maximum capacitance. Outputs (3): 2 Main, 1 Record (XLR and RCA connectors ). OUTPUT POLARITY: Non-inverting. MAXIMUM INPUT: Low Gain: 48V RMS BAL, 24V RMS SE, Medium Gain: 24V RMS BAL, 12V RMS SE, High Gain: 12V RMS BAL, 6V RMS SE. RATED OUTPUTS: 2V RMS 1Hz to 100kHz into 200K ohm balanced load (maximum balanced output capability is 15V RMS at less than 0.5% THD at 1kHz). CONTROLS: Rotary volume selector (104 steps) and rotary input selector.Push buttons: Power, Mono, BAL / SE, Proc, Monitor, Mute. Also remote buttons: Display, Bal L, Bal R, Hours, Invert, Gain. POWER SUPPLIES: Electronically-regulated low and high voltage supplies. Automatic 50 sec. warm-up/brown-out mute. Line regulation better than .01%. NOISE: 1.3uV RMS residual IHF weighted balanced equivalent input noise with volume at 1 (100dB below 2V RMS output). TUBE COMPLEMENT: 2-6H30P dual triode, (Hybrid JFET/ tube audio circuit, solid-state power supply.) POWER REQUIREMENTS: 105-130VAC 60Hz (210- 260VAC 50/60Hz) 50 watts maximum. DIMENSIONS: 19 (48 cm) W x 5.25 (13.4 cm) H (standard rack panel) x 13.3 (33.8 cm) D. Handles extend 1.50 (3.8 cm) forward of the front panel. Important Note on Shipping: eBay estimates of shipping costs are not accurate and do not include insurance or adult signature requirement. Please contact us for a more accurate quote. No shipping to Vietnam, China or Hong Kong.Please do not submit payment until you have received an invoice from us with accurate shipping costs. We reserve the right to hold the item or cancel the transaction if actual shipping costs are not paid.
(23) : 1787.78 €(17) : 2667.35 €
Live search