TIBO TI430 DAB Tuner Digital Audio hifi seperate system NO RENOTE CONTROL FM tuning The TI430 DAB offers both manual and automatic tuning on the FM band. This makes it possible to save just one specifi c channel. It also makes it possible to adjust the supplied antenna for the best possible signal. Automatic tuning 1. To use the Autotune function through the front panel controls, you must press the Autotune button. The unit will search for a higher frequency with a proper signal. Press and hold the Autotune button for two seconds, the unit will search for a lower frequency with a proper signal. 2. You can also activate the Autotune function by using the remote control. On the display you can see that the frequency increases or decreases. When the tuner has found a channel, the tunning process will automatically stop, and the sound from the found channel will play. If no channels are found, you must check if the antenna has been correctly connected an adjusted. DAB/FM TUNER Note: If there are channels from FM band that have not been saved, you must tune into them again either manually or automatically, if you wish to listen to them again. 2 1 Manual Tuning 1. To activate the manual tuning function through the front panel controls, simply turn the Control/Tuning button. If you turn it clockwise, the unit will tune in to a station at a higher frequency and if you turn the button anticlockwise, the unit will tune in to a station at a lower frequency. It is also possible to activate the manual tuning function with the remote control. 2. Use the << or >> buttons this works in the same manner as the Control/Tuning button on the front panel.

TIBO TI430 DAB Tuner Digital Audio hifi seperate system NO RENOTE CONTROL FM tuning The TI430 DAB offers both manual and automatic tuning on the FM band. This makes it possible to save just one specifi c channel. It also makes it possible to adjust the supplied antenna for the best possible signal. Automatic tuning 1. To use the Autotune function through the front panel controls, you must press the Autotune button. The unit will search for a higher frequency with a proper signal. Press and hold the Autotune button for two seconds, the unit will search for a lower frequency with a proper signal. 2. You can also activate the Autotune function by using the remote control. On the display you can see that the frequency increases or decreases. When the tuner has found a channel, the tunning process will automatically stop, and the sound from the found channel will play. If no channels are found, you must check if the antenna has been correctly connected an adjusted. DAB/FM TUNER Note: If there are channels from FM band that have not been saved, you must tune into them again either manually or automatically, if you wish to listen to them again. 2 1 Manual Tuning 1. To activate the manual tuning function through the front panel controls, simply turn the Control/Tuning button. If you turn it clockwise, the unit will tune in to a station at a higher frequency and if you turn the button anticlockwise, the unit will tune in to a station at a lower frequency. It is also possible to activate the manual tuning function with the remote control. 2. Use the << or >> buttons this works in the same manner as the Control/Tuning button on the front panel.

TIBO TI430 DAB Tuner Digital Audio hifi seperate system NO RENOTE CONTROL FM tuning The TI430 DAB offers both manual and automatic tuning on the FM band. This makes it possible to save just one specifi c channel. It also makes it possible to adjust the supplied antenna for the best possible signal. Automatic tuning 1. To use the Autotune function through the front panel controls, you must press the Autotune button. The unit will search for a higher frequency with a proper signal. Press and hold the Autotune button for two seconds, the unit will search for a lower frequency with a proper signal. 2. You can also activate the Autotune function by using the remote control. On the display you can see that the frequency increases or decreases. When the tuner has found a channel, the tunning process will automatically stop, and the sound from the found channel will play. If no channels are found, you must check if the antenna has been correctly connected an adjusted. DAB/FM TUNER Note: If there are channels from FM band that have not been saved, you must tune into them again either manually or automatically, if you wish to listen to them again. 2 1 Manual Tuning 1. To activate the manual tuning function through the front panel controls, simply turn the Control/Tuning button. If you turn it clockwise, the unit will tune in to a station at a higher frequency and if you turn the button anticlockwise, the unit will tune in to a station at a lower frequency. It is also possible to activate the manual tuning function with the remote control. 2. Use the << or >> buttons this works in the same manner as the Control/Tuning button on the front panel.

TIBO TI430 DAB Tuner Digital Audio hifi seperate system NO RENOTE CONTROL FM tuning The TI430 DAB offers both manual and automatic tuning on the FM band. This makes it possible to save just one specifi c channel. It also makes it possible to adjust the supplied antenna for the best possible signal. Automatic tuning 1. To use the Autotune function through the front panel controls, you must press the Autotune button. The unit will search for a higher frequency with a proper signal. Press and hold the Autotune button for two seconds, the unit will search for a lower frequency with a proper signal. 2. You can also activate the Autotune function by using the remote control. On the display you can see that the frequency increases or decreases. When the tuner has found a channel, the tunning process will automatically stop, and the sound from the found channel will play. If no channels are found, you must check if the antenna has been correctly connected an adjusted. DAB/FM TUNER Note: If there are channels from FM band that have not been saved, you must tune into them again either manually or automatically, if you wish to listen to them again. 2 1 Manual Tuning 1. To activate the manual tuning function through the front panel controls, simply turn the Control/Tuning button. If you turn it clockwise, the unit will tune in to a station at a higher frequency and if you turn the button anticlockwise, the unit will tune in to a station at a lower frequency. It is also possible to activate the manual tuning function with the remote control. 2. Use the << or >> buttons this works in the same manner as the Control/Tuning button on the front panel.