The AN-S4/L is an audio transformer with a “3 Ohm input impedance - Primarily designed for use with the Audio Note (UK) IO range”, the output impedance stands at 47K ohm. The internals contain a 0.1mm laminated mumetal 250 and wiring of 99.99% silver. Note: your computer or phone display settings or our lighting may affect the color a bit All photos are of actual item being sold. Please review all photos for details before buying as they are part of the description. International shipping through the ebay global shipping program only. Thank you for looking, we appreciate your business!

I am selling a CD transport in excellent condition.The BEST CD transport based on the PHILIPS CD-PRO mechanism. MAINS INPUT - 220-240V 50/60HzOPTICAL PICK UP - 3 beam laserUNIT DIMENSIONS - 142mm (h) x 300mm (w) x 428mm (d)UNIT WEIGHT - 7.5 kgMAX. POWER CONSUMPTION - ?35W Remote control and clamp available.100% performance, no complaints.I will pack and send the parcel to any place in the world.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

For sale a pair (2pcs) of Audio Note UHiB Copper wired (primary and secondary windings) preamplifier output transformers. Step down ratio 33:1, manufacturer code TX-028I-U-IATP-IATP-FC.I bought them few years ago from partsconnexion, to replace IHiB transformers in my DAC, Ive sold the DAC with IHiB transformers so I dont need this pair any more.Transformers was used for a few years, they are in perfect condition.

RARE 70s Early Audio Note Kondo AN-S3 MC step up trans for all carts SILVER WIRE.This is one of the first product of master Kondo, founder of AudioNote Japan, the real AudioNote. This is handmade wiring by master Kondor, wire is pure silver. Input impedance is 3,10,40 ohm that help you use all cartridges in markets. Perfect working condition. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

------------------------------------------------------- Information in: English see below ------------------------------------------------------- MOVING COIL STEP-UP TRANSFORMER AUDIO NOTEMUSICs FINEST CONDUCTORAN-S 4 LDer hier angebotene Übertrager ist das Modell AN-S 4 L mit einer Eingangsimpedanz von 3 Ohm. Der AN-S 4 ist ein Low-Output Übertrager der absoluten Top-Klasse und ist mit Reinsilberspulen ausgestattet. Absolute Weltklasse, ein klanglicher Traum, zu Recht bekannt für höchste Bauqualität und unglaublicher Musikalität. Der Audio Note AN-S4 ist ein passiver Step-Up-Übertrager von Phono MC auf MM. Er sorgt dafür, dass die geringen Spannungssignale die ein MC Tonabnehmer generiert so verstärkt werden, dass ein MM Phonovorverstärker diese dann optimal verarbeiten kann. Den Audio Note AN-S4 gibt es in mehreren Versionenbzw. unterschiedlichen Impedanzen.Der hier angebotene Übertrager ist das Modell AN-S 4 L mit einer Eingangsimpedanz von 3 Ohm.Er ist hauptsächlich für Tonabnehmer der Audio Note IO Reihe gedacht ... ... oder für Tonabnehmer mit entsprechend niedriger Impedanz ( bis max. 2 Ohm ) Ausgangsimpedanz: 47 kOhm Kanalgleichheit: +/- 0,3 dB verwendetes Drahtmaterial: 99,99% reines SilberKernmateriel: Super Mumetal CoreFarbe Frontplatte: Aluminium silber Technischer & optischer Zustand: Technisch ist dieser MC-MM Adapter voll funktionsfähig. Optisch sind bei genauer Betrachtung winzige Kerbenan der linken und an der unteren Vorderkante zu finden. Der Gesamteindruck dieses Übertragers aus Nichtraucher Haushalt ist dennoch sehr gepflegt und sauber, siehe Originalfotos. Alle Bilder sind Originalfotos vom angebotenen Übertrager. All pictures are original photos of the offered transformer. Lieferumfang: Audio Note StepUp Transformer Modell AN-S 4 Version: AN-S 4L mit original AN-V Chinch / RCA Silberkabel.Audio Note AN-V Symmetrical 99,99% Pure Silver Coaxial Interconnect Cable... so wie in den Fotos ersichtlich. Versand / Abholung: Versand erfolgt gut und sicher verpackt als versicherte Sendung. Selbstverständlich ist auch Abholung möglich. Kontaktdaten sowie Anschrift bzw. Abholadresse siehe unter: Rechtliche Informationen des Verkäufers. Allgemeine Daten: Abmessungen (BxHxT): ca. 7,6 x 8,4 x 17,5 cmGehäusetiefe ohne überstehende Buchsen: ca 15,5 cm Gewicht ( ohne Verpackung ): ca. 1,2 kg Habe noch weitere sehr interessante Artikel hier auf eBay, bitte klicken Sie oben rechts bei den Angaben zum Verkäufer auf: Andere Artikel aufrufen Danke für Ihr Interesse an diesem Angebot. ------------------------------------------------------------------------------- HIGH END MC STEP UP TRANSFORMER AUDIO NOTE AN-S4model: AN-S4 L Moving Coil Cartridge Step-Up Transformer99,99% Pure Silver Wired Coils with Fully Interleaved Super Mumetal Core.Comes with original Audio Note AN-V Symmetrical 99,99% Pure SilverCoaxial Interconnect Cable. L = Low version ... AN-S4/L with 3 Ohm input impedance.Primarily designed for use with the Audio Note (UK) IO range. It is possible to use it with cartridges that have greater internal impedance, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridgewill usually provide the best results. Transformer in great shape, everything works perfect, optical condition is also good, see original images. All pictures are original photos of the offered transformer Item will be well packed for shippingThanks for looking--------------------

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Made in the UK Audio Note AN-S1 Moving Coil Step up Transformer This quality unit allows you to use a low output MC with a MM phono input. Unit is excellent condition and comes with manual and original packing and box. Buy with confidence from one of the USAs longest existing, most knowledgeable audio dealers: Gene Rubin Audio Established way back in 1979! Go ahead and google Gene Rubin Audio, read the forums, read the reviews, read my ebay feedback, you are dealing with the best customer service in the audio businessFranchised dealer for: LFD, Rega, Heed, Palmer, Pure Fidelity, Sutherland, Graham Speakers, Fyne Audio, Belles, Exposure, Aurender, Hana, Koetsu, Ortofon, Croft, Harbeth, Spendor, Clearaudio, Dynavector, Quadraspire, Chord Company, Audience, Audio Desk Systeme, Creek, Milty, KAB, Q-UP, Furutech, Musical Surroundings, and more.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

For sale is my Audio Note S2 step-up transformer to allow you to use an MC cartridge with a MM phono stage. When I was looking for an expensive MC phono stage I did a lot of research about alternatives and tried a lot of different kit. If you have never heard a SUT with a valve MM phono stage you don’t know what you are missing, you will never buy a MC phono stage again, it’s a completely different world of performance. And of course Audio Note is the pinnacle. This SUT is switchable between two settings to give a wide range of cartridge compatibility. I’ve used with a Hana ML, Hana Urishi and Kotsu Black which are all a perfect match. There are loads of other cartridges that work with this SUT, the Low version is really just for the Audio Note IO and some unusual cartridges so the version I’m selling (medium – high) is the one to get. The 15 Ohm switch (Low) of the ‘M-H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 OhmsThe 60 Ohm switch (high) is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. I tried a few other SUT’s in the price range I’m selling this for and none came come even close to the AN. Only selling because I moved to the AN IO cartridge and an AN-S4. Don’t forget if you want one there is a wait of months as AN build everything by hand to order. It really is as new, not a mark on it. I have the original packaging. More details can be found here: AN-S2 | Audio Note (UK) Please see my feedback and bid with confidence. Any questions at all please reach out and kindly have a look at my other auctions.

Audio Note OTO Line PP Rhrenvollverstrker im Top-Zustand, ansehen!. Hallo, Ich biete hier fr einen Freund den gezeigten Verstrker von Audio Note an. Sehr guter Zustand, sehen Sie auch die Bilder. Technisch einwandfrei. Gerne persnliche Besichtigung und Abholung vor Ort. Dabei ist ein Netzkabel. Der Verstrker wurde im November 2022 repariert, Rechnung gibt es dazu. (Trafo wurde gewechselt, Ltstellen teilweise berarbeitet) Aus Nichtraucherhaushalt, keine Haustiere. Privatverkauf, ohne Garantie oder Gewhrleistung. Rcknahme ist nicht mglich. Bieten Sie nur, wenn Sie damit einverstanden sind. Markenname und Bezeichnung dienen ausschlielich der Beschreibung und sind nicht Bestandteil der Auktion. Vielen Dank.

Audio Note CDT Two/II Cd Transport. Superb used condition. Had very light use. Comes with remote control and original pacakging. Current model. Please note this one has Black Gate capacitors. Collection from Woolwich Arsenal only! Will be demonstrated as fully working. Please contact me before commiting to buy to arrange collection date.

Audio Note S8L MC Step Up Transformer level 5 for IO, lyra, Koetsu, Hana, Kisiki. Best with top AN IO cartridges level 5 product among the very best SUTs