2 x AUDAX AP 210 Z0 Neue Highend Tieftöner 1x in OVP 1x in geeigneter Verpackung.

New Old stock audax 5.5 aerogel replacement woofer .

New Old stock audax 5.5 aerogel replacement woofer .

New Old stock audax 5.5 aerogel replacement woofer .

New Old stock audax 5.5 aerogel replacement woofer .

New Old stock audax 5.5 aerogel replacement woofer .

New Old stock audax 5.5 aerogel replacement woofer .

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

JBL AP100JLO 4 midrange speakers pair made in France by Audax as shown, tested and working from speakers parted out will be well packed and insured

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

Pr Audax HM210AZ) 8 Woofers, 6 ohms, quality made and designed in France. They have cast frames, rubber surrounds, excellent quality and design. They were never used, open box, always in a climate controlled non smoking environment, very nice working tested condition. See the impressive specs and description below. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :) The Audax HM210Z0 loudspeaker is a bass/midrange with airgel cone and molded Zamack bowl. This 8-inch high-fidelity loudspeaker is ideal for making 2-way speakers, with for example an Audax TW025A20Mg tweeter or a SEAS T25CF002 above. The HD-A (High Definition Airgel) cone is a real technological breakthrough in this field, surpassing the materials known to date. Through an extraordinary combination of a new material and an original process, Audax has created a composite cone, an innovation whose properties are close to ideal for a direct radiation transducer. Ultra light, extremely rigid and perfectly damped, this uncompromising cone is made of a controlled matrix of acrylic polymer gel enveloping ideally ordered Carbon and Kevlar fibres. An exclusive Audax process allows optimized alignment of the fibers in the polymer chain. The process provides full control of the profile and weight of the cone, while offering the ability to vary the thickness at each location. This 210 mm bass/midrange driver is intended for the design of prestigious 2 or 3-way loudspeakers. It is notably equipped with a molded Zamack chassis with ventilated under the spider to promote the best transient response and a non-resonant warhead to linearize the response at the top of the spectrum. Its good power handling results from the use of a coil on a Kapton support reinforced with glass fiber in flat copper wire on edge. The gold-plated connector allows excellent solderability. The Suggested applications table indicates different types of load (to build your loudspeaker) including the one used for measuring the response curve (Vb REF). The published curves correspond to the bass response for a given volume (Vb) and vent size (Dp-Lp). 2 or 3 way speakers of prestige. It is notably equipped with a molded Zamack chassis with ventilated under the spider to promote the best transient response and a non-resonant warhead to linearize the response at the top of the spectrum. Shielded 8 HDA cone driver High impact polymer chassis HDA (High Definition Aerogel) cone Fully shielded magnet system for audio video application Non resonant high impact polymer chassis High loss rubber surround Built in cosmetic ring designed for front-rear and recessed mounting High temperature voice coil-4 layers Aluminium former General Product type Cone driver Brand Audax Reference AP210Z0 Informations Nominal impedance 6 ohm Datas Weight ~1.4 kg

Tourne disque Spring avec bras Melodyne, bouton pour régler sur des 16 tours (donc d’après recherche ce tourne disque est après 1957), 33, 45 et 78 tours ; une « enceinte » Audax + un saphir neuf marque Pathé (36,80 francs dans les années 60 !!) Testé, fonctionne mais après pour le reste, je ne suis pas un spécialiste. Comme vous pouvez le voir sur les photos, le support réceptacle du disque en plastique gris est abimé, mais cela n’empêche pas le fonctionnement. Environ 5 kg 36 cm X 30 X 15,5 cm(voir mon autre annonce un sac / pochette pub vinyle label Safari Ambiance ) Envoi en colissimo avec de beaux timbres (je suis à 35 km aller-retour du 1er relais-colis doù lenvoi postal) Merci dattendre la facture groupée.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

Pr Audax HM210AZ) 8 Woofers, 6 ohms, quality made and designed in France. They have cast frames, rubber surrounds, excellent quality and design. They were never used, open box, always in a climate controlled non smoking environment, very nice working tested condition. See the impressive specs and description below. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :) The Audax HM210Z0 loudspeaker is a bass/midrange with airgel cone and molded Zamack bowl. This 8-inch high-fidelity loudspeaker is ideal for making 2-way speakers, with for example an Audax TW025A20Mg tweeter or a SEAS T25CF002 above. The HD-A (High Definition Airgel) cone is a real technological breakthrough in this field, surpassing the materials known to date. Through an extraordinary combination of a new material and an original process, Audax has created a composite cone, an innovation whose properties are close to ideal for a direct radiation transducer. Ultra light, extremely rigid and perfectly damped, this uncompromising cone is made of a controlled matrix of acrylic polymer gel enveloping ideally ordered Carbon and Kevlar fibres. An exclusive Audax process allows optimized alignment of the fibers in the polymer chain. The process provides full control of the profile and weight of the cone, while offering the ability to vary the thickness at each location. This 210 mm bass/midrange driver is intended for the design of prestigious 2 or 3-way loudspeakers. It is notably equipped with a molded Zamack chassis with ventilated under the spider to promote the best transient response and a non-resonant warhead to linearize the response at the top of the spectrum. Its good power handling results from the use of a coil on a Kapton support reinforced with glass fiber in flat copper wire on edge. The gold-plated connector allows excellent solderability. The Suggested applications table indicates different types of load (to build your loudspeaker) including the one used for measuring the response curve (Vb REF). The published curves correspond to the bass response for a given volume (Vb) and vent size (Dp-Lp). 2 or 3 way speakers of prestige. It is notably equipped with a molded Zamack chassis with ventilated under the spider to promote the best transient response and a non-resonant warhead to linearize the response at the top of the spectrum. Shielded 8 HDA cone driver High impact polymer chassis HDA (High Definition Aerogel) cone Fully shielded magnet system for audio video application Non resonant high impact polymer chassis High loss rubber surround Built in cosmetic ring designed for front-rear and recessed mounting High temperature voice coil-4 layers Aluminium former General Product type Cone driver Brand Audax Reference AP210Z0 Informations Nominal impedance 6 ohm Datas Weight ~1.4 kg

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.