Atc sca2 pre amplifer good conditionsome miner marks around ,please check all the picsalso some miner age relataed fading on top ,hardly noticiable ,still looks greatperfectly working comes in original box with remote controlcash on collection or can deliver personally for fuel cost or will post if required no time wasters please thanks for looking NO PHONO BOARD INSTALLED IN THIS also got matching atc p1 power amp for sale ,pleae check my other items or contact me any time if u after the full system

ATC SCA2 solid state preamp Overview The SCA2 is ATC’s highest performance preamplifier and has been in continuous production since 1996, testament to its exceptional performance and timeless styling. It is the ideal partner to ATC’s high-end active loudspeakers and also power amplifiers, such as the ATC P2. Balanced and unbalanced inputs and outputs provide flexible connectivity to a very wide range of partnering equipment. The optional phono stage is fully configurable for both gain, resistive and capacitive loading and its low-noise design makes it well suited to even the lowest output moving coil cartridges. Features Discrete class-A low-noise circuitry throughout. High-current output stages ensure exceptionally low distortion into any load & when driving long cables. 500kHz bandwidth eliminates phase shift and contributes to the outstanding reproduction of fine musical detail. Optional SPH2 MC/MM RIAA precision phono stage with extensive gain/loading options. 2 x stereo balanced XLR line inputs & 6 x stereo RCA/Phono line inputs. 1 x stereo balanced XLR & 1 x stereo single-ended RCA/Phono preamp output. Billet Aluminium IR Remote Control. Frequency Response: D.C. – >500kHz (-3dB)THD: < 0.0005%/ -106dB (1kHz, 1V, 600 ohms) S+N/N Ratio: >108dB (IEC ‘A’)Crosstalk: >90dB (10Hz – 20kHz)Input sensitivity: 230mV (re. 1V output) Maximum Output Level – Balanced: 17V r.m.s (600 ohms)Maximum Output Level – Unbalanced: 8.5V r.m.s. (600 ohms) Analogue Pre-Amp Outputs: 1 x stereo male XLR (balanced), 1 x stereo RCA/Phono (unbalanced)Analogue Tape Output: 2 x stereo via RCA/Phono Analogue Inputs: 2 x stereo via female XLR (balanced), 6 x stereo via RCA/Phono (unbalanced) RIAA Input: Optional via addition of internal card (converts 1 x stereo line input). Configurable Moving Coil / Moving Magnet (MC/MM) with adjustable gain & loading. Dimensions: 102 x 440 x 353mm / 4.0 x 17.3 x 13.9 inches (H x W x D) Weight: 6.85kg / 15.07lbs

ATC SCA2 solid state preamp Overview The SCA2 is ATC’s highest performance preamplifier and has been in continuous production since 1996, testament to its exceptional performance and timeless styling. It is the ideal partner to ATC’s high-end active loudspeakers and also power amplifiers, such as the ATC P2. Balanced and unbalanced inputs and outputs provide flexible connectivity to a very wide range of partnering equipment. The optional phono stage is fully configurable for both gain, resistive and capacitive loading and its low-noise design makes it well suited to even the lowest output moving coil cartridges. Features Discrete class-A low-noise circuitry throughout. High-current output stages ensure exceptionally low distortion into any load & when driving long cables. 500kHz bandwidth eliminates phase shift and contributes to the outstanding reproduction of fine musical detail. Optional SPH2 MC/MM RIAA precision phono stage with extensive gain/loading options. 2 x stereo balanced XLR line inputs & 6 x stereo RCA/Phono line inputs. 1 x stereo balanced XLR & 1 x stereo single-ended RCA/Phono preamp output. Billet Aluminium IR Remote Control. Frequency Response: D.C. – >500kHz (-3dB)THD: < 0.0005%/ -106dB (1kHz, 1V, 600 ohms) S+N/N Ratio: >108dB (IEC ‘A’)Crosstalk: >90dB (10Hz – 20kHz)Input sensitivity: 230mV (re. 1V output) Maximum Output Level – Balanced: 17V r.m.s (600 ohms)Maximum Output Level – Unbalanced: 8.5V r.m.s. (600 ohms) Analogue Pre-Amp Outputs: 1 x stereo male XLR (balanced), 1 x stereo RCA/Phono (unbalanced)Analogue Tape Output: 2 x stereo via RCA/Phono Analogue Inputs: 2 x stereo via female XLR (balanced), 6 x stereo via RCA/Phono (unbalanced) RIAA Input: Optional via addition of internal card (converts 1 x stereo line input). Configurable Moving Coil / Moving Magnet (MC/MM) with adjustable gain & loading. Dimensions: 102 x 440 x 353mm / 4.0 x 17.3 x 13.9 inches (H x W x D) Weight: 6.85kg / 15.07lbs

ATC CA2 mk2 preamp boxed with remote ATC CA2  mk2 preamp  boxed with remote Pictures sell! Auctiva offers Free Image Hosting and Editing. The complete eBay Selling Solution.

ATC SCA2 solid state preamp Overview The SCA2 is ATC’s highest performance preamplifier and has been in continuous production since 1996, testament to its exceptional performance and timeless styling. It is the ideal partner to ATC’s high-end active loudspeakers and also power amplifiers, such as the ATC P2. Balanced and unbalanced inputs and outputs provide flexible connectivity to a very wide range of partnering equipment. The optional phono stage is fully configurable for both gain, resistive and capacitive loading and its low-noise design makes it well suited to even the lowest output moving coil cartridges. Features Discrete class-A low-noise circuitry throughout. High-current output stages ensure exceptionally low distortion into any load & when driving long cables. 500kHz bandwidth eliminates phase shift and contributes to the outstanding reproduction of fine musical detail. Optional SPH2 MC/MM RIAA precision phono stage with extensive gain/loading options. 2 x stereo balanced XLR line inputs & 6 x stereo RCA/Phono line inputs. 1 x stereo balanced XLR & 1 x stereo single-ended RCA/Phono preamp output. Billet Aluminium IR Remote Control. Frequency Response: D.C. – >500kHz (-3dB)THD: < 0.0005%/ -106dB (1kHz, 1V, 600 ohms) S+N/N Ratio: >108dB (IEC ‘A’)Crosstalk: >90dB (10Hz – 20kHz)Input sensitivity: 230mV (re. 1V output) Maximum Output Level – Balanced: 17V r.m.s (600 ohms)Maximum Output Level – Unbalanced: 8.5V r.m.s. (600 ohms) Analogue Pre-Amp Outputs: 1 x stereo male XLR (balanced), 1 x stereo RCA/Phono (unbalanced)Analogue Tape Output: 2 x stereo via RCA/Phono Analogue Inputs: 2 x stereo via female XLR (balanced), 6 x stereo via RCA/Phono (unbalanced) RIAA Input: Optional via addition of internal card (converts 1 x stereo line input). Configurable Moving Coil / Moving Magnet (MC/MM) with adjustable gain & loading. Dimensions: 102 x 440 x 353mm / 4.0 x 17.3 x 13.9 inches (H x W x D) Weight: 6.85kg / 15.07lbs

Perfect working order and excellent condition. Comes fully boxed with remote and power lead. 2021 model.Photos:Please have a good look at the photos as they are of the actual item for sale unless otherwise stated and will give you a good idea of the item condition. They will also show you any included accessories such as remote control. If the item comes with any accessories or original box it will be included in the photos and item description, if its not then assume it isnt included.Delivery:Free next working day delivery (unless otherwise stated) within mainland UK. For all other destinations, please ask for a delivery quote or use eBays GSP shipping programme. Items will be packaged to a high standard to avoid damage in transit. Returns:Returns accepted within 14 days, the item must be in the same condition as it was prior to original sale. Buyer pays for return delivery costs. Items not as described:If you receive your item and feel the item is not a described, please get in touch so that we can work together to resolve the issue. Please give us the chance to put it right before leaving feedback because sometimes issues cant be avoided but we always strive to ensure the customer is happy.