Arcam FMJ A19 Integrated AmplifierBlack ColorDesigned In The UKIt includes a power cable.*It does not include a remote control* Approximate measurements:-About 17 wide-About 10.5 deep-About 2.75 tall **See pictures. I tested the output and input and everything works fine. Overall it is in good physical condition with some slight scratches, scuffs, dirty spots, etc.** Ships from the USA!This item may ship UPS Ground. UPS Ground does not ship to PO Boxes. Feel free to message me with any questions. Thanks for shopping!

1111MicrosoftInternetExplorer402DocumentNotSpecified7.8 ?Normal0 Arcam FMJ A19 Integrated Amplifier Arcam FMJ A19 comes with remote and power supply. In very good used condition with surface scratches and small marks. Remote has missing battery flop. In full working order. SpecificationsPower output: 50 watts per channel into 8? (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.5%Input sensitivity: 5mV (MM), 1000mV (line)Signal to noise ratio: 80dB (MM), 105dB (line)Output: 0.63V (Pre out)Dimensions: 432 x 275 x 85mmWeight: 8.5kg Please check all of the photographs as these helps to form part of the description.If you require any help with your order, please don’t hesitate to contact us by eBay contact form.

Arcam FMJ A19 Integrated Stereo Amplifier. Condition is Used. Shipped with Canada Post Expedited Parcel.

Arcam FMJ A19 Integrated Stereo Amplifier. Condition is Used. Shipped with Canada Post Expedited Parcel.

Arcam FMJ A19 Integrated Stereo Amplifier. Condition is Used. Shipped with Canada Post Expedited Parcel.

Arcam FMJ A19 Integrated Stereo Amplifier. Condition is Used. Shipped with Canada Post Expedited Parcel.

Arcam FMJ A19 Integrated Stereo Amplifier. Condition is Used. Shipped with Canada Post Expedited Parcel.

Arcam FMJ A19 Integrated Stereo Amplifier. Condition is Used. Shipped with Canada Post Expedited Parcel.

Arcam FMJ A19 Integrated Stereo Amplifier. Condition is Used. Shipped with Canada Post Expedited Parcel.

Arcam FMJ A19 Integrated Stereo Amplifier. Condition is Used. Shipped with Canada Post Expedited Parcel.

Arcam FMJ A19 Comes with official Manuel remote and power lead. Reason for selling upgradingI had this amplifier from new so only one ownerIt’s still got the plastic film on the screenThere is scratch and a couple of marks on back topOther then that perfect conditionFree post or collection

Normal 0 false false false EN-GB X-NONE X-NONE Arcam FMJ A19 Stereo Integrated Amplifier Arcam FMJ A19 comes with official remote, manual and power lead. In very good used condition with surface scratches and small marks. In full working order. The amplifiers design and performance have been refined and tuned to an exquisite degree. This focus on sound quality has led to an intellegent power supply design that also enables the amplifier to offer a flexible upgrade path. The power section of the A19 is design to be able to supply two of Arcams class-leading r-Series products in addition to its main duties. This allows the A19 to become a digital hub for a whole range of digital connection upgrades that includes both wireless Bluetooth® devices and USB sources. While the world of music is increasingly a digital one, analogue sources are not forgotten. The continued popularity of vinyl has led Arcam to to equip the A19 with a new ultra-low noise moving magnet (MM) phono stage that allows the music enthusiast to enjoy their vinyl collection afresh. While the use of high performance headphones has grown dramatically of late, little effort has been made to improve the headphone sections of the amplifiers that drive them. The A19 addresses this by employing a completely new circuit that can deliver a level of sound quality that will thrill even the most demanding listener. Key Features: Continuous power output (20Hz—20kHz at 0.5% THD), per channel Both channels, 8?, 20Hz—20kHz: 50WSingle channel, 4?, at 1kHz: 90WHarmonic distortion, 80% power, 8? at 1kHz: 0.003% Inputs Phono (MM) cartridge Input sensitivity at 1kHz: 5mVInput impedance: 47k? + 100pFFrequency response (ref. RIAA curve): 20Hz—20kHz ± 1dBSignal/noise ratio (Awtd) 50W, ref. 5mV input: 80dBOverload margin, 50mV at 1kHz: 20dB Line and AV inputs Nominal sensitivity: 1VInput impedance: 10k?Maximum input: 4.6VrmsFrequency response: 20Hz—20kHz ± 0.2dBSignal/noise ratio (Awtd) 50W, ref. 1V input: 105dB Outputs Preamplifier output Nominal output level: 630mVOutput impedance: 230? Heaphones Output Maximum output level into 600?: 4VOutput impedance: 1ohmLoad range: 16?—2k? Accessory power output Using accessory power cable supplied, provides two 2.1mm DC connectors: 6V, 1A General Mains voltage: 110–120V~ or 220–240V~Power consumption (maximum): 350WDimensions W x D x H (including feet): 433 x 275 x 85mmWeight (net): 8.5kgWeight (packed): 10.2kg Please check all of the photographs as these helps to form part of the description. If you require any help with your order, please don’t hesitate to contact us by eBay contact form.

Im selling my Arcam FMJ A19. It is full working order and is in excellent condition. No scratches, dents or marks. The Amp still has the plastic film over the display. Sounds great, especially with my KEF LS50 minimonitors, which Im also selling. The amp comes complete with remote, power cable & original Instructions. I have upgraded my system hence the sale. Amp Review: https://www.whathifi.com/arcam/fmj-a19/review I am also selling: My Arcam CD player FMJ CD17 with remote. https://www.whathifi.com/arcam/fmj-cd17/review My KEF LS50 (50 year anniversary edition) minimonitors. https://www.whathifi.com/news/kef-marks-50th-anniversary-ls50-mini-monitor My Atacama Aurora 6 Glass Speaker Stands (Filled with Atacama Atabites SMD Z 7.0HD High Density Speaker stand filler black/blue). https://www.whathifi.com/atacama/aurora-6/review Please see my other items for details. A great system overall, youll love the sound, although your neighbours may not :) I may sell the whole system as a package - please mail me if youre interested. Any questions, please ask. Thank you for looking.

Arcam FMJ A19 Stereo Integrated Amplifier with Remote. Award winning amplifier. Used with a few very faint marks on chassis. Almost like new. It does have a slightly strange software glitch where after putting the amp into standby via the remote and then bringing it out of standby again the display only shows the volume level instead of volume level and input source. Turning amp off via the power button on the front of the unit solves the issue but it happens again when put into standby via the remote. It’s a common thing with this model apparently and has no effect on the operation of the amp or the actual sound performance whatsoever.