Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

Arcam FMJ A38 amplifier with remote (not pictured). This amp was perfect for years and had little use but suddenly developed a fault and needs to be repaired. It started to make odd noises through the speakers (like sine waves and deep bass) and now the screen also flickers when its on (see photo) so I just stopped using it and bought a replacement. I had a quote from Arcam for something like £300 to have a look and try and repair it a few years ago but I cannot remember exactly how much they quoted. Not much to say really - this was a highly acclaimed piece of equipment that was £1800 new that I loved for years and would be great to see it go to a good home to be fixed and used again. I wanted to try myself but the reality is that I dont have the time. I will courier this but at the buyers risk. I think better to collect really from Harborne, Birmingham.

arcam amplifier FMJ A38 - with MM/MC phono stage module. Brilliant amp, has had a fairly easy life powering a set of spendor s8e speakers; which were in a small room and listened to at a relatively low volume.

Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

arcam amplifier FMJ A38 - with MM/MC phono stage module. Brilliant amp, has had a fairly easy life powering a set of spendor s8e speakers; which were in a small room and listened to at a relatively low volume.

Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

Genuine, original Arcam CR 389 system remote control in full working order and good condition. It can be used with amps, cd players and tuners in the Diva range of audio equipment and also some of the FMJ range (I have used it with my FMJ A32 amp, FMJ A39 amp and FMJ CD36 cd player) These are now becoming very rare so don’t hesitate or someone else may snap it up. Thanks for looking.

Genuine, original Arcam CR 389 system remote control in full working order and good condition. It can be used with amps, cd players and tuners in the Diva range of audio equipment and also the FMJ range (I have used it with my FMJ A32 amp and FMJ CD36 cd player) These are now becoming very rare so don’t hesitate or someone else may snap it up. Thanks for looking.

Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

Here I have for sale my Arcam FMJ P38 Power Amplifier. In good working order. Few marks to the casing but nothing major. Used it in conjunction with an FMJ A38 integrated amp with great results. Outputs 105 watts into 8 ohms. Comes with power lead. No manual and no original box. Cash on collection or will post using UPS. UK Only sale!