APart Champ 4 Leistungsverstäker mit 4 Kanälen, lüfterlos dynamische Ausgangsleistung 4 x 125 Watt bei 4 Ohm Dynamische Ausgangsleistung 4 x 75 Watt bei 8 Ohm dynamische Ausgangsleistung gebrückt 2 x 230 Watt bei 8 Ohm Frequenzgang 20 - 40 kHz Kühlsystem Konvektion 19 Zoll, 1 HE sehr guter Zustand, wie abgebildet, voll funktionsfähig, geliefert wird nur das, was abgebildet ist Dies ist eine Privatauktion. Keine Garantie, kein Umtausch, keine Rückgabe. Bieten Sie nur, wenn Sie mit diesen Bedingungen einverstanden sind. Sollte etwas übersehen oder vergessen worden sein, schicken Sie bitte eine Mail. Wir klären das. Zuzüglich Porto, bei mehreren Artikeln nach Gewicht. Bitte Gesamtbetrag anfragen! (Zuviel gezahltes Porto wird erstattet.)

APart Champ 4 Leistungsverstäker mit 4 Kanälen, lüfterlos dynamische Ausgangsleistung 4 x 125 Watt bei 4 Ohm Dynamische Ausgangsleistung 4 x 75 Watt bei 8 Ohm dynamische Ausgangsleistung gebrückt 2 x 230 Watt bei 8 Ohm Frequenzgang 20 - 40 kHz Kühlsystem Konvektion 19 Zoll, 1 HE sehr guter Zustand, wie abgebildet, voll funktionsfähig, geliefert wird nur das, was abgebildet ist Dies ist eine Privatauktion. Keine Garantie, kein Umtausch, keine Rückgabe. Bieten Sie nur, wenn Sie mit diesen Bedingungen einverstanden sind. Sollte etwas übersehen oder vergessen worden sein, schicken Sie bitte eine Mail. Wir klären das. Zuzüglich Porto, bei mehreren Artikeln nach Gewicht. Bitte Gesamtbetrag anfragen! (Zuviel gezahltes Porto wird erstattet.)

Biete hier eine Leistungsendstufe von APart an. Lüfterlos im 19 Rackdesign Technische Daten: Bridge-mono operation 8 ohm 350W2 channel mode 8 ohm 120W / ch2 channel mode 4 ohm 180 W / ch2 channel mode 2.7 ohm 200 W / chInput impedance / sensitivity unbalanced (RCA) / 4 ohm 10 Kohm / 1 V 0dBVInput impedance / sensitivity balanced (XLR) / 4 ohm 20 Kohm / 1 V 0 dBVFrequency response (0, -0.5 dB) 10 Hz - 50 kHzTHD < 0.05 %IMD < 0.06 %Noise >100 dBAGain 30 dB (36 dB in bridged mode)Damping factor >200Dynamics and level control APC, switchable for 2-3 or 4-8 ohmsPower amp circuit design High current, high voltage class GEfficiency (dynamic program of 10 dB, 1 V input) 70 %Protection circuits DC, HF, clip, overcurrent, short-circuitTemperature protection 95°C/ch + transformer 105°CCooling convectional, no fanPower consumption 15VA idle, 600VA full program, 1KVA peakMains power requirements 230VAC, 50HzPHYSICAL SPECIFICATIONSNet dimensions (cm) (W x H x D) 48.3 x 4.4 x 36Gross dimensions (cm) (W x H x D) 56 x 10 x 55Net weight 7.5 kgGross weight 9.0 kg

Verkaufe einen professionellen Verstärker von APart, der einwandfei funktioniert. Für weitere Informationen gerne auf der Website nachgucken: https://www.musikhaus-korn.de/de/apart-audio-champ-4/pd/38030 . Gerne vorbeikommen, um sich ein Bild zu machen. Abholung bevorzugt. Bei Fragen gerne schreiben. Features: Lüfterloser 4x 125W Leistungsverstärker APC Leistungsregulierung Umfangreiche Schutzschaltung Brücken-, Stereo- und Dual-Mono Betrieb Schaltbarer Hoch- und Tiefpassfilter für Subwoofer/Satellitenlautsprecher Nur 1 HE Technische Daten: Leistung (Musik): Brückenbetrieb (8 Ohm) 230 W, 4-Kanal (4 Ohm) 4 x 125 W Eingangsimpedanz: 10 kOhm Frequenzgang: 20 Hz - 40 kHz, (0, -0,5 dB) Verzerrung: < 0,1 % Rauschabstand: > 100 dBA Verstärkung: 26 dB (32 dB gebrückt) Schutzschaltung: DC, HF, Übersteuerung, Kurzschluss, 2-stufige Temperatursicherung Kühlung: Konvektionskühlung, kein Lüfter Filter (Kanal 1/2): Tiefpassfilter 100Hz/12dB/oct, APart spezifisch - schaltbar Filter (Kanal 3/4): Hochpassfilter 100Hz/12dB/oct - schaltbar Leistungsaufnahme: 26VA Leerlauf, 400VA Vollast Spannungsversorgung: 230 VAC, 50Hz Abmessungen (B x H x T): 48,3 x 4,4 x 36 cm Gewicht: 7,5 kg

Abzugeben ist hier eine Apart Audio Champ 4 Endstufe mit 4 Kanälen á 125W RMS an 4 Ohm (4x 75W RMS an 8 Ohm) Je 2 Kanäle Mono brückbar für z.B. Sub/Sat Betrieb mit der internen Aktivweiche Die Endstufe ist in sehr gutem Zustand mit nur minimalen Gebrauchsspuren und funktioniert einwandfrei. Sie klingt Apart typisch hervorragend sauber und druckvoll! Versand oder gern auch Abholung in Berlin Schöneberg. Privatverkauf! Keine Garantie oder Rücknahme!

CHAMP 4 Convection Cooled Power Amp 4x125W: The CHAMP-4 versatile power amplifier is a part of the revolutionary CHAMP-series of convection cooled power amplifiers what makes this unit maintenance free. The CHAMP-4 has no fan inside which implicates the amplifier works very silent and it stays dust-free at all times. The CHAMP-4 amplifier has 4 individual amplifier channels but can be bridged into 2 stereo channels or even a 2.1 sound system. Use two channels as subwoofer channels and drive your top loudspeakers with the two remaining channels and experience the pure musical power of CHAMP-4. It is just one of the ways in which you can use this quad amplifier. The built-in APC Protection Technology allows you to preset the power potential of the amplifier. It constantly analyses incoming music signals and keeps the dynamics alive. An additional ultra fast peak limiter avoids that the amplifier starts to clip or get distorted. Product Features: CHAMP 4 Convection Cooled Power AmplifierVersatile power amplifier is a part of the revolutionary CHAMP-seriesConvection cooled power amplifiers make this unit maintenance freeNo fan inside meaning very silent operationIndividual amplifier channels but can be bridged into 2 stereo channels or even a 2.1 sound systemBuilt-in APC Protection Technology allows you to preset the power potential of the amplifier Product SpecificationsGeneral Dynamic output power 4 ohms: 4 x 125 wattsDynamic output power 8 ohms: 4 x 75 wattsRMS output power 4 ohms: 4 x 80 wattsRMS output power 8 ohms: 4 x 60 wattsDynamic output power bridged 8 ohms: 2 x 230 wattsOutput power RMS bridged 8 ohms: 2 x 130 wattsMinimum impedance load per channel: 4 ohmsMinimum impedance load bridged per channel: 8 ohmsPower consumption (max): 400 wattsPower supply: 230 VACOutput channels: 4Line input unbalanced: 4Frequency response (in Hz): 20 - 40 kCooling system: convectionApplicable low impedance: yes Physical & Dimensions: Height: 1UDepth (build in): 337mmDepth (incl front): 359mmWeight: 7.5kg

Amplificatore Hi-end Apart Champ One. A chi interessato sono disposto a fare le foto del prodotto e delle sue condizioni, essendo molto pesante. Caratteristiche: Fanless 2 x 600W Power Amplifier high efficiency > 70% APC power management Sound selection: Solid or Tube Extensive Protection Circuit Bridge- or Stereo Mode User protected power and sound settings Color: black Dynamic program power: Bridge-mono (8 ohm) 1100 W, 2 channel (4 ohm) 2 x 600 W Input impedance: 10 kOhm (RCA), 20 kOhm (XLR) Frequency response: 10 Hz - 50 kHz, (0, -0.5 dB) Distrotion: < 0.05 % Signal to Noise Ratio: > 100 dBA Gain: 33 dB (39 dB bridged) Protection circuits: DC, HF, clip, overcurrent, short-circuit, 2 step Temperature protection Cooling: convectional, no fan Power consumption: 18VA idle, 1KVA full program, 1.5KVA peak Mains power requirements: 230VAC, 50Hz Dimensions (W x H x D): 48.3 x 8.8 x 38 cm Weight: 13 kg

Apart CHAMP 4 Convection Cooled Power Amp 4 x 125W @ 4 1U. Opened the item, never used it. Needed a simpler audio setup.

APart Champ One Stereo Power Amplifier. Full working order and excellent condition. SpecificationsPower output: 300 watts per channel into 8? (stereo), 900 watts into 8? (mono)Frequency response: 10Hz to 50kHzTotal harmonic distortion: 0.05%Damping factor: 100Gain: 33 dBInput sensitivity: 1VSignal to noise ratio: 100dBSpeaker load impedance: 4? (minimum)Dimensions: 483 x 88 x 380mmWeight: 13kgTERMS & CONDITIONSIMPORTANT - PLEASE READ BEFORE PURCHASING 1. Returns 1.1 All items are sold with either a 14 or 30 day return policy as stated in the listing. Please contact us as soon as possible in the unlikely event that your item arrives not as described and we will be sure to resolve the issue. Abuse of the return policy is in breach of eBays T&Cs. Products may be invisibly security marked. All unscrupulous buyers will be reported and an action fraud case will be opened. 1.2 If goods are returned as surplus to your requirement and are not faulty on receipt, a restocking charge of 20% will apply. 2. Power Cables 2.1 In order to reduce electronic waste, unless stated, units that require standard IEC kettle or figure of eight power cables will not be included unless requested. If you require one, please let us know immediately after purchasing and we will include one free of charge. 3. International / Non Mainland UK Buyers 3.1 Most of our items are available to purchase via eBays global shipping program. If postage costs are not displayed to you, please contact us before pressing buy it now and we will try to find a solution. 4. General/Other 4.1 All of our shipments are carefully packaged to ensure safe carriage. All fragile packages are clearly marked as fragile and we do our utmost to ensure that they arrive to you intact. Recycled packaging materials will be made use of where appropriate. Thank you for looking, happy eBaying!

Apart CHAMP 4 Convection Cooled Power Amp 4x125W: The CHAMP-4 versatile power amplifier is a part of the revolutionary CHAMP-series of convection cooled power amplifiers what makes this unit maintenance free. The CHAMP-4 has no fan inside which implicates the amplifier works very silent and it stays dust-free at all times. The CHAMP-4 amplifier has 4 individual amplifier channels but can be bridged into 2 stereo channels or even a 2.1 sound system. Use two channels as subwoofer channels and drive your top loudspeakers with the two remaining channels and experience the pure musical power of CHAMP-4. It is just one of the ways in which you can use this quad amplifier. The built-in APC Protection Technology allows you to preset the power potential of the amplifier. It constantly analyses incoming music signals and keeps the dynamics alive. An additional ultra fast peak limiter avoids that the amplifier starts to clip or get distorted. Product Features: CHAMP 4 Convection Cooled Power Amplifier Versatile power amplifier is a part of the revolutionary CHAMP-series Convection cooled power amplifiers make this unit maintenance free No fan inside meaning very silent operation Individual amplifier channels but can be bridged into 2 stereo channels or even a 2.1 sound system Built-in APC Protection Technology allows you to preset the power potential of the amplifier Product Specifications General Dynamic output power 4 ohms: 4 x 125 watts Dynamic output power 8 ohms: 4 x 75 watts RMS output power 4 ohms: 4 x 80 watts RMS output power 8 ohms: 4 x 60 watts Dynamic output power bridged 8 ohms: 2 x 230 watts Output power RMS bridged 8 ohms: 2 x 130 watts Minimum impedance load per channel: 4 ohms Minimum impedance load bridged per channel: 8 ohms Power consumption (max): 400 watts Power supply: 230 VAC Output channels: 4 Line input unbalanced: 4 Frequency response (in Hz): 20 - 40 k Cooling system: convection Applicable low impedance: yes Physical & Dimensions: Height: 1U Depth (build in): 337mm Depth (incl front): 359mm Weight: 7.5kg Unit is used but in very good condition all round and in perfect working order. Unit will come packed in generic box with power cable.