Anthem PVA 2. All original boxes, papers, and like new condition. Only reason for selling is upgraded my main 2 channel amp and now using my old main 2 channel amp powering my rear channel in my theater so this one needs to go. Also to fund AVM 90 so my AVM60 will be listed next. If interested in both let me know for better shipping. Great sounding 125wpc. Anthem makes fantastic stuff. Amp was made in Canada. $1,500 new. From Anthem website. Anything But Average Unlocking the incredible sound sculptures, special effects and dynamics of today’s home theater and multichannel music recordings is no small feat, at least for the average amplifier. But then, Anthem’s PVA 2, PVA 5 and PVA 7 amplifiers are anything but average. They are equally at home delivering all of the thundering impact and excitement of a surround sound movie experience as they are imparting the subtle nuances of a multichannel music performance or paying rich sonic tribute to the sweeping highs and lows of your favorite two-channel recording. GENERAL Inputs 2-Single-Ended, 1 Relay Trigger (3.5-mm Mono Jack) Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger(3.5-mm Mono Jack) SWITCHES Front Panel Power (On/Off) Rear Panel 3 On/Off Modes (Trigger, Manual, Auto) POWER OUTPUT (Continuous RMS, 20 Hz - 20 kHz, <1.0% THD) Impedance 8? 4? 2? # of Channels Driven 1 All 1 All 1 All 125 W 105 W 200 W 140 W 300 W - OTHER SPECIFICATIONS HEADROOM 1.25 db (8 ?); 2.13 db (4 ?) POWER BANDWIDTH 10 Hz - 80 kHz (125 W @ 8 ?) FREQUENCY RESPONSE 20 Hz - 20 kHz (-0.20 db); 5 Hz - 100 kHz (-2.5 db) THD + N <0.002% @ 1 kHz; <0.03% @ 20 kHz (100 W into 8 ?) INPUT SENSITIVITY 1.12 VRMS for 125 W into 8 ? INPUT IMPEDANCE 10 k? DAMPING FACTOR 200 @ 1 kHz (ref. 8 ?) S/N RATIO 122 db, A-weighted (ref. 125 W) CHANNEL SEPARATION >65 db (100 Hz - 10 kHz) VOLTAGE GAIN 29 db SLEW RATE 28 v/µs POWER REQUIREMENTS 500 W @ maximum power output (8 ? load) DIMENSIONS (H x W x D; heights include feet) 5-7/8 (14.9 cm) High x 17-1/4 (43.8 cm) Wide x 11 (28 cm) Deep WEIGHT (Unpacked) 26 lb (11.8

Anthem PVA 2. All original boxes, papers, and like new condition. Only reason for selling is upgraded my main 2 channel amp and now using my old main 2 channel amp powering my rear channel in my theater so this one needs to go. Also to fund AVM 90 so my AVM60 will be listed next. If interested in both let me know for better shipping. Great sounding 125wpc. Anthem makes fantastic stuff. Amp was made in Canada. $1,500 new. From Anthem website. Anything But Average Unlocking the incredible sound sculptures, special effects and dynamics of today’s home theater and multichannel music recordings is no small feat, at least for the average amplifier. But then, Anthem’s PVA 2, PVA 5 and PVA 7 amplifiers are anything but average. They are equally at home delivering all of the thundering impact and excitement of a surround sound movie experience as they are imparting the subtle nuances of a multichannel music performance or paying rich sonic tribute to the sweeping highs and lows of your favorite two-channel recording. GENERAL Inputs 2-Single-Ended, 1 Relay Trigger (3.5-mm Mono Jack) Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger(3.5-mm Mono Jack) SWITCHES Front Panel Power (On/Off) Rear Panel 3 On/Off Modes (Trigger, Manual, Auto) POWER OUTPUT (Continuous RMS, 20 Hz - 20 kHz, <1.0% THD) Impedance 8? 4? 2? # of Channels Driven 1 All 1 All 1 All 125 W 105 W 200 W 140 W 300 W - OTHER SPECIFICATIONS HEADROOM 1.25 db (8 ?); 2.13 db (4 ?) POWER BANDWIDTH 10 Hz - 80 kHz (125 W @ 8 ?) FREQUENCY RESPONSE 20 Hz - 20 kHz (-0.20 db); 5 Hz - 100 kHz (-2.5 db) THD + N <0.002% @ 1 kHz; <0.03% @ 20 kHz (100 W into 8 ?) INPUT SENSITIVITY 1.12 VRMS for 125 W into 8 ? INPUT IMPEDANCE 10 k? DAMPING FACTOR 200 @ 1 kHz (ref. 8 ?) S/N RATIO 122 db, A-weighted (ref. 125 W) CHANNEL SEPARATION >65 db (100 Hz - 10 kHz) VOLTAGE GAIN 29 db SLEW RATE 28 v/µs POWER REQUIREMENTS 500 W @ maximum power output (8 ? load) DIMENSIONS (H x W x D; heights include feet) 5-7/8 (14.9 cm) High x 17-1/4 (43.8 cm) Wide x 11 (28 cm) Deep WEIGHT (Unpacked) 26 lb (11.8

A great sounding five channel amplifier built in North America. Sonic purity is the result of Anthems extensive research. A superior power supply using a low-noise toroidal transformer with low-ESL and low ESR capacitors provide huge current capability. https://www.anthemav.com/products-archived/series=pva-series/model=pva-5/page=specs has Anthems full info and specs. Complete box, packing and manual. If youre a two channel guy, good 5-channel amps are great for bi-amping a stereo pair of speakers. Having an unused channel simply makes more current available for the channels you are driving.

UP FOR SALE - Anthem PVA 4 Black 4 Channel Power Amplifier We offer a variety of units, all in comparable condition to the one pictured. If we have multiple units in stock, the unit you will receive may vary. We review all bulk offers.No charging cable included unless noted in the title. Manufacturer: Anthem Model: MCA 50 Features: Condition: USED OUR PROMISES Quality Packaging with Fast Service Friendly Tech Support from Maryland EVRs mission is to provide customers with quality electronics at an affordable price. We take pride in backing our products with the best customer service. EVR is based out of Baltimore, MD. Need Help Troubleshooting? Hours: 8:30am - 4:30pm EST

A great sounding five channel amplifier built in North America. Sonic purity is the result of Anthems extensive research. A superior power supply using a low-noise toroidal transformer with low-ESL and low ESR capacitors provide huge current capability. https://www.anthemav.com/products-archived/series=pva-series/model=pva-5/page=specs has Anthems full info and specs. Complete box, packing and manual. If youre a two channel guy, good 5-channel amps are great for bi-amping a stereo pair of speakers. Have an unused channel simply make more current available for the channels you are driving.

The Anthem PVA 2 Stereo Power Amplifier is the perfect addition to any home audio system. With 105-200 W of power, depending on ohm load driven, this unit provides high-quality sound and has two outputs for optimal coverage. The black color and sleek design make it a stylish addition to any room. This power amplifier has stereo L/R RCA audio inputs and two inputs, and it is a D amplifier class. The Anthem brand is known for its high-quality products, and this unit is no exception. It is sold as a unit, and it is located in the United States. Make an offer now to sell this power amplifier and upgrade your home audio system. https://www.anthemav.com/products-archived/model=pva-2/page=specs

Good working condition but does have some scratches and scuffs from prior use. See all photos to get the best idea of quality and condition. No additional parts other than power cord

I am the original owner of this high end four channel amplifier. It is in very good condition with no problems. It originally sold for $1,800. You can see more detail on this Anthem website https://www.anthemav.com/products-archived/collection=performance/model=pva-4/page=overview You can pay the shipping or save money and pickup from either Bakersfield, CA or Irvine, CA

Good working condition but does have some scratches and scuffs from prior use. See all photos to get the best idea of quality and condition. No additional parts other than power cord

Hello, you are bidding on the mighty fine sounding Anthem PVA7 7 Channel Power Amplifier. This amplifier has been fully tested and works and sounds great. It comes with the power cord. Let me know if you have any questions. Happy Bidding! For more info on the amp, keep reading... Experience superior sound quality with the Anthem PVA7 125W 7 Channel Amplifier. This amplifier boasts a sleek black design and is equipped with 7 inputs and 7 outputs, making it perfect for home entertainment systems. With its powerful 125 W output, you can enjoy your favorite movies and music with exceptional clarity. The Anthem PVA7 is a reliable and durable amplifier that has been tested for 100% functionality. It is perfect for those who want to enhance their home audio experience without compromising on style. Whether you are a music enthusiast or a casual listener, this amplifier is sure to impress. About the Anthem PVA 7 Seven channels of clean, dynamic power If your home theater system isnt delivering the clarity and impact youre looking for, your A/V receiver may be the culprit. Dont get me wrong — receivers have become remarkable jack-of-all-trades performers. But few can stand toe-to-toe with a high-quality power amplifier like the Anthem PVA 7 when it comes to creating and maintaining a sense of sonic realism. The PVA 7s rock-solid power and vanishingly low levels of noise and distortion mean than you can play your movies and music loud, but comfortably, without fatiguing harshness. Anthems high-current design keeps a tight grip on your speakers drivers, delivering wider dynamics and deep, solid bass. Value-priced performance The PVA 7 is part of Anthems value-priced Performance Series. Its rated power is 105 watts per channel into 8 ohms, and 140 watts into 4 ohms. Whenever you see an amplifier with higher output into 4 ohms than 8 ohms, its usually a good sign. It means the amp has a robust regulated power supply. The ability to drive 4-ohm speakers is a nice benefit because these days there are lots of high-performance 4-ohm speakers that many typical A/V receivers would struggle to drive. Actually, if your receiver has multichannel preamp outputs, you can easily connect the PVA 7 and use it to drive your main, surround, and back surround or height channels. Anthems proprietary and patented circuit designs follow the companys Keep-It-Simple principle, using the fewest number of parts in the signal path to maintain sonic integrity. In addition to its high instantaneous power output, the PVA 7 has the finesse to handle the wide-ranging challenges of movie special effects and demanding musical passages. Product highlights: 105 watts per channel into 8 ohms, 140 watts per channel into 4 ohms for compatibility with even difficult-to-drive speakers Class AB design uses 4 high-current bipolar output transistors per channel for lower distortion custom low-noise, high-power toroidal transformer for stable, noise-free operation Advanced Load Monitoring™ technology monitors internal temperature, current, and voltage to ensure safe, uninterrupted operation 3-way on/off operation: manual, triggered, or signal-sensing auto on/off unbalanced RCA inputs for all seven channels binding post terminals accept bare wire, banana plugs, and spade lugs 3.5mm trigger in/out jacks allow the amplifier to be turned on or off remotely detachable power cord designed, engineered, and manufactured in Canada total harmonic distortion: 0.03% signal-to-noise ratio: 122 dB 17-1/4W x 5-7/8H x 16-3/8D weight: 47.3 lbs.

Hello, you are bidding on the mighty fine sounding Anthem PVA7 7 Channel Power Amplifier. This amplifier has been fully tested and works and sounds great. It comes with the power cord. Let me know if you have any questions. Happy Bidding! For more info on the amp, keep reading... Experience superior sound quality with the Anthem PVA7 125W 7 Channel Amplifier. This amplifier boasts a sleek black design and is equipped with 7 inputs and 7 outputs, making it perfect for home entertainment systems. With its powerful 125 W output, you can enjoy your favorite movies and music with exceptional clarity. The Anthem PVA7 is a reliable and durable amplifier that has been tested for 100% functionality. It is perfect for those who want to enhance their home audio experience without compromising on style. Whether you are a music enthusiast or a casual listener, this amplifier is sure to impress. About the Anthem PVA 7 Seven channels of clean, dynamic power If your home theater system isnt delivering the clarity and impact youre looking for, your A/V receiver may be the culprit. Dont get me wrong — receivers have become remarkable jack-of-all-trades performers. But few can stand toe-to-toe with a high-quality power amplifier like the Anthem PVA 7 when it comes to creating and maintaining a sense of sonic realism. The PVA 7s rock-solid power and vanishingly low levels of noise and distortion mean than you can play your movies and music loud, but comfortably, without fatiguing harshness. Anthems high-current design keeps a tight grip on your speakers drivers, delivering wider dynamics and deep, solid bass. Value-priced performance The PVA 7 is part of Anthems value-priced Performance Series. Its rated power is 105 watts per channel into 8 ohms, and 140 watts into 4 ohms. Whenever you see an amplifier with higher output into 4 ohms than 8 ohms, its usually a good sign. It means the amp has a robust regulated power supply. The ability to drive 4-ohm speakers is a nice benefit because these days there are lots of high-performance 4-ohm speakers that many typical A/V receivers would struggle to drive. Actually, if your receiver has multichannel preamp outputs, you can easily connect the PVA 7 and use it to drive your main, surround, and back surround or height channels. Anthems proprietary and patented circuit designs follow the companys Keep-It-Simple principle, using the fewest number of parts in the signal path to maintain sonic integrity. In addition to its high instantaneous power output, the PVA 7 has the finesse to handle the wide-ranging challenges of movie special effects and demanding musical passages. Product highlights: 105 watts per channel into 8 ohms, 140 watts per channel into 4 ohms for compatibility with even difficult-to-drive speakers Class AB design uses 4 high-current bipolar output transistors per channel for lower distortion custom low-noise, high-power toroidal transformer for stable, noise-free operation Advanced Load Monitoring™ technology monitors internal temperature, current, and voltage to ensure safe, uninterrupted operation 3-way on/off operation: manual, triggered, or signal-sensing auto on/off unbalanced RCA inputs for all seven channels binding post terminals accept bare wire, banana plugs, and spade lugs 3.5mm trigger in/out jacks allow the amplifier to be turned on or off remotely detachable power cord designed, engineered, and manufactured in Canada total harmonic distortion: 0.03% signal-to-noise ratio: 122 dB 17-1/4W x 5-7/8H x 16-3/8D weight: 47.3 lbs.

Hello, you are bidding on the mighty fine sounding Anthem PVA7 7 Channel Power Amplifier. This amplifier has been fully tested and works and sounds great. It comes with the power cord. Let me know if you have any questions. Happy Bidding! For more info on the amp, keep reading... Experience superior sound quality with the Anthem PVA7 125W 7 Channel Amplifier. This amplifier boasts a sleek black design and is equipped with 7 inputs and 7 outputs, making it perfect for home entertainment systems. With its powerful 125 W output, you can enjoy your favorite movies and music with exceptional clarity. The Anthem PVA7 is a reliable and durable amplifier that has been tested for 100% functionality. It is perfect for those who want to enhance their home audio experience without compromising on style. Whether you are a music enthusiast or a casual listener, this amplifier is sure to impress. About the Anthem PVA 7 Seven channels of clean, dynamic power If your home theater system isnt delivering the clarity and impact youre looking for, your A/V receiver may be the culprit. Dont get me wrong — receivers have become remarkable jack-of-all-trades performers. But few can stand toe-to-toe with a high-quality power amplifier like the Anthem PVA 7 when it comes to creating and maintaining a sense of sonic realism. The PVA 7s rock-solid power and vanishingly low levels of noise and distortion mean than you can play your movies and music loud, but comfortably, without fatiguing harshness. Anthems high-current design keeps a tight grip on your speakers drivers, delivering wider dynamics and deep, solid bass. Value-priced performance The PVA 7 is part of Anthems value-priced Performance Series. Its rated power is 105 watts per channel into 8 ohms, and 140 watts into 4 ohms. Whenever you see an amplifier with higher output into 4 ohms than 8 ohms, its usually a good sign. It means the amp has a robust regulated power supply. The ability to drive 4-ohm speakers is a nice benefit because these days there are lots of high-performance 4-ohm speakers that many typical A/V receivers would struggle to drive. Actually, if your receiver has multichannel preamp outputs, you can easily connect the PVA 7 and use it to drive your main, surround, and back surround or height channels. Anthems proprietary and patented circuit designs follow the companys Keep-It-Simple principle, using the fewest number of parts in the signal path to maintain sonic integrity. In addition to its high instantaneous power output, the PVA 7 has the finesse to handle the wide-ranging challenges of movie special effects and demanding musical passages. Product highlights: 105 watts per channel into 8 ohms, 140 watts per channel into 4 ohms for compatibility with even difficult-to-drive speakers Class AB design uses 4 high-current bipolar output transistors per channel for lower distortion custom low-noise, high-power toroidal transformer for stable, noise-free operation Advanced Load Monitoring™ technology monitors internal temperature, current, and voltage to ensure safe, uninterrupted operation 3-way on/off operation: manual, triggered, or signal-sensing auto on/off unbalanced RCA inputs for all seven channels binding post terminals accept bare wire, banana plugs, and spade lugs 3.5mm trigger in/out jacks allow the amplifier to be turned on or off remotely detachable power cord designed, engineered, and manufactured in Canada total harmonic distortion: 0.03% signal-to-noise ratio: 122 dB 17-1/4W x 5-7/8H x 16-3/8D weight: 47.3 lbs.

Hello, you are bidding on the mighty fine sounding Anthem PVA7 7 Channel Power Amplifier. This amplifier has been fully tested and works and sounds great. It comes with the power cord. Let me know if you have any questions. Happy Bidding! For more info on the amp, keep reading... Experience superior sound quality with the Anthem PVA7 125W 7 Channel Amplifier. This amplifier boasts a sleek black design and is equipped with 7 inputs and 7 outputs, making it perfect for home entertainment systems. With its powerful 125 W output, you can enjoy your favorite movies and music with exceptional clarity. The Anthem PVA7 is a reliable and durable amplifier that has been tested for 100% functionality. It is perfect for those who want to enhance their home audio experience without compromising on style. Whether you are a music enthusiast or a casual listener, this amplifier is sure to impress. About the Anthem PVA 7 Seven channels of clean, dynamic power If your home theater system isnt delivering the clarity and impact youre looking for, your A/V receiver may be the culprit. Dont get me wrong — receivers have become remarkable jack-of-all-trades performers. But few can stand toe-to-toe with a high-quality power amplifier like the Anthem PVA 7 when it comes to creating and maintaining a sense of sonic realism. The PVA 7s rock-solid power and vanishingly low levels of noise and distortion mean than you can play your movies and music loud, but comfortably, without fatiguing harshness. Anthems high-current design keeps a tight grip on your speakers drivers, delivering wider dynamics and deep, solid bass. Value-priced performance The PVA 7 is part of Anthems value-priced Performance Series. Its rated power is 105 watts per channel into 8 ohms, and 140 watts into 4 ohms. Whenever you see an amplifier with higher output into 4 ohms than 8 ohms, its usually a good sign. It means the amp has a robust regulated power supply. The ability to drive 4-ohm speakers is a nice benefit because these days there are lots of high-performance 4-ohm speakers that many typical A/V receivers would struggle to drive. Actually, if your receiver has multichannel preamp outputs, you can easily connect the PVA 7 and use it to drive your main, surround, and back surround or height channels. Anthems proprietary and patented circuit designs follow the companys Keep-It-Simple principle, using the fewest number of parts in the signal path to maintain sonic integrity. In addition to its high instantaneous power output, the PVA 7 has the finesse to handle the wide-ranging challenges of movie special effects and demanding musical passages. Product highlights: 105 watts per channel into 8 ohms, 140 watts per channel into 4 ohms for compatibility with even difficult-to-drive speakers Class AB design uses 4 high-current bipolar output transistors per channel for lower distortion custom low-noise, high-power toroidal transformer for stable, noise-free operation Advanced Load Monitoring™ technology monitors internal temperature, current, and voltage to ensure safe, uninterrupted operation 3-way on/off operation: manual, triggered, or signal-sensing auto on/off unbalanced RCA inputs for all seven channels binding post terminals accept bare wire, banana plugs, and spade lugs 3.5mm trigger in/out jacks allow the amplifier to be turned on or off remotely detachable power cord designed, engineered, and manufactured in Canada total harmonic distortion: 0.03% signal-to-noise ratio: 122 dB 17-1/4W x 5-7/8H x 16-3/8D weight: 47.3 lbs.

Hello, you are bidding on the mighty fine sounding Anthem PVA7 7 Channel Power Amplifier. This amplifier has been fully tested and works and sounds great. It comes with the power cord. Let me know if you have any questions. Happy Bidding! For more info on the amp, keep reading... Experience superior sound quality with the Anthem PVA7 125W 7 Channel Amplifier. This amplifier boasts a sleek black design and is equipped with 7 inputs and 7 outputs, making it perfect for home entertainment systems. With its powerful 125 W output, you can enjoy your favorite movies and music with exceptional clarity. The Anthem PVA7 is a reliable and durable amplifier that has been tested for 100% functionality. It is perfect for those who want to enhance their home audio experience without compromising on style. Whether you are a music enthusiast or a casual listener, this amplifier is sure to impress. About the Anthem PVA 7 Seven channels of clean, dynamic power If your home theater system isnt delivering the clarity and impact youre looking for, your A/V receiver may be the culprit. Dont get me wrong — receivers have become remarkable jack-of-all-trades performers. But few can stand toe-to-toe with a high-quality power amplifier like the Anthem PVA 7 when it comes to creating and maintaining a sense of sonic realism. The PVA 7s rock-solid power and vanishingly low levels of noise and distortion mean than you can play your movies and music loud, but comfortably, without fatiguing harshness. Anthems high-current design keeps a tight grip on your speakers drivers, delivering wider dynamics and deep, solid bass. Value-priced performance The PVA 7 is part of Anthems value-priced Performance Series. Its rated power is 105 watts per channel into 8 ohms, and 140 watts into 4 ohms. Whenever you see an amplifier with higher output into 4 ohms than 8 ohms, its usually a good sign. It means the amp has a robust regulated power supply. The ability to drive 4-ohm speakers is a nice benefit because these days there are lots of high-performance 4-ohm speakers that many typical A/V receivers would struggle to drive. Actually, if your receiver has multichannel preamp outputs, you can easily connect the PVA 7 and use it to drive your main, surround, and back surround or height channels. Anthems proprietary and patented circuit designs follow the companys Keep-It-Simple principle, using the fewest number of parts in the signal path to maintain sonic integrity. In addition to its high instantaneous power output, the PVA 7 has the finesse to handle the wide-ranging challenges of movie special effects and demanding musical passages. Product highlights: 105 watts per channel into 8 ohms, 140 watts per channel into 4 ohms for compatibility with even difficult-to-drive speakers Class AB design uses 4 high-current bipolar output transistors per channel for lower distortion custom low-noise, high-power toroidal transformer for stable, noise-free operation Advanced Load Monitoring™ technology monitors internal temperature, current, and voltage to ensure safe, uninterrupted operation 3-way on/off operation: manual, triggered, or signal-sensing auto on/off unbalanced RCA inputs for all seven channels binding post terminals accept bare wire, banana plugs, and spade lugs 3.5mm trigger in/out jacks allow the amplifier to be turned on or off remotely detachable power cord designed, engineered, and manufactured in Canada total harmonic distortion: 0.03% signal-to-noise ratio: 122 dB 17-1/4W x 5-7/8H x 16-3/8D weight: 47.3 lbs.

Hello, you are bidding on the mighty fine sounding Anthem PVA7 7 Channel Power Amplifier. This amplifier has been fully tested and works and sounds great. It comes with the power cord. Let me know if you have any questions. Happy Bidding! For more info on the amp, keep reading... Experience superior sound quality with the Anthem PVA7 125W 7 Channel Amplifier. This amplifier boasts a sleek black design and is equipped with 7 inputs and 7 outputs, making it perfect for home entertainment systems. With its powerful 125 W output, you can enjoy your favorite movies and music with exceptional clarity. The Anthem PVA7 is a reliable and durable amplifier that has been tested for 100% functionality. It is perfect for those who want to enhance their home audio experience without compromising on style. Whether you are a music enthusiast or a casual listener, this amplifier is sure to impress. About the Anthem PVA 7 Seven channels of clean, dynamic power If your home theater system isnt delivering the clarity and impact youre looking for, your A/V receiver may be the culprit. Dont get me wrong — receivers have become remarkable jack-of-all-trades performers. But few can stand toe-to-toe with a high-quality power amplifier like the Anthem PVA 7 when it comes to creating and maintaining a sense of sonic realism. The PVA 7s rock-solid power and vanishingly low levels of noise and distortion mean than you can play your movies and music loud, but comfortably, without fatiguing harshness. Anthems high-current design keeps a tight grip on your speakers drivers, delivering wider dynamics and deep, solid bass. Value-priced performance The PVA 7 is part of Anthems value-priced Performance Series. Its rated power is 105 watts per channel into 8 ohms, and 140 watts into 4 ohms. Whenever you see an amplifier with higher output into 4 ohms than 8 ohms, its usually a good sign. It means the amp has a robust regulated power supply. The ability to drive 4-ohm speakers is a nice benefit because these days there are lots of high-performance 4-ohm speakers that many typical A/V receivers would struggle to drive. Actually, if your receiver has multichannel preamp outputs, you can easily connect the PVA 7 and use it to drive your main, surround, and back surround or height channels. Anthems proprietary and patented circuit designs follow the companys Keep-It-Simple principle, using the fewest number of parts in the signal path to maintain sonic integrity. In addition to its high instantaneous power output, the PVA 7 has the finesse to handle the wide-ranging challenges of movie special effects and demanding musical passages. Product highlights: 105 watts per channel into 8 ohms, 140 watts per channel into 4 ohms for compatibility with even difficult-to-drive speakers Class AB design uses 4 high-current bipolar output transistors per channel for lower distortion custom low-noise, high-power toroidal transformer for stable, noise-free operation Advanced Load Monitoring™ technology monitors internal temperature, current, and voltage to ensure safe, uninterrupted operation 3-way on/off operation: manual, triggered, or signal-sensing auto on/off unbalanced RCA inputs for all seven channels binding post terminals accept bare wire, banana plugs, and spade lugs 3.5mm trigger in/out jacks allow the amplifier to be turned on or off remotely detachable power cord designed, engineered, and manufactured in Canada total harmonic distortion: 0.03% signal-to-noise ratio: 122 dB 17-1/4W x 5-7/8H x 16-3/8D weight: 47.3 lbs.

Anthem PVA 7 Pair Rack Mount Ears Plates Sides -Black- as pictured. Please read the following in full before making purchase or asking about international shipping costs. Item condition details are located in the seller notes section above. Item will be well packed to arrived to you in the condition shown. Most items ship in 1-3 business days. Please make special requests before purchase. Shipping price is for the Contiguous US only. I do not ship to Alaska, Hawaii, Puerto Rico, APO, FPO, DPO and other non-standard addresses. PO Box addresses for items over 7lbs or over 5 cubed, usually incur additional shipping expense. Seller will select the shipping service but guarantees shipping service of the same tier or faster than the one the buyer selects. INTERNATIONAL SALES: No need to ask about shipping rates to your country. I ship through EBays International Shipping Program only. All customs and import duties for international purchases are the responsibility of the buyer. I ship to your Confirmed Paypal address only. Direct signature is required for some purchases. Returns accepted and given for item price only. There are some items I do not offer returns on. All items are strictly Buy-It-Now for the price given. I do not accept offers on items unless many items are purchased. All DVD players are NTSC Region 1 player (US and Canada). EBays Item Specifics are not always accurate. Please verify specifications with the manufacturer. All electronic devices with wall plugs are 120V 60Hz devices. Thank you.

Hello, you are bidding on the mighty fine sounding Anthem PVA7 7 Channel Power Amplifier. This amplifier has been fully tested and works and sounds great. It comes with the power cord. Let me know if you have any questions. Happy Bidding! For more info on the amp, keep reading... Experience superior sound quality with the Anthem PVA7 125W 7 Channel Amplifier. This amplifier boasts a sleek black design and is equipped with 7 inputs and 7 outputs, making it perfect for home entertainment systems. With its powerful 125 W output, you can enjoy your favorite movies and music with exceptional clarity. The Anthem PVA7 is a reliable and durable amplifier that has been tested for 100% functionality. It is perfect for those who want to enhance their home audio experience without compromising on style. Whether you are a music enthusiast or a casual listener, this amplifier is sure to impress. About the Anthem PVA 7 Seven channels of clean, dynamic power If your home theater system isnt delivering the clarity and impact youre looking for, your A/V receiver may be the culprit. Dont get me wrong — receivers have become remarkable jack-of-all-trades performers. But few can stand toe-to-toe with a high-quality power amplifier like the Anthem PVA 7 when it comes to creating and maintaining a sense of sonic realism. The PVA 7s rock-solid power and vanishingly low levels of noise and distortion mean than you can play your movies and music loud, but comfortably, without fatiguing harshness. Anthems high-current design keeps a tight grip on your speakers drivers, delivering wider dynamics and deep, solid bass. Value-priced performance The PVA 7 is part of Anthems value-priced Performance Series. Its rated power is 105 watts per channel into 8 ohms, and 140 watts into 4 ohms. Whenever you see an amplifier with higher output into 4 ohms than 8 ohms, its usually a good sign. It means the amp has a robust regulated power supply. The ability to drive 4-ohm speakers is a nice benefit because these days there are lots of high-performance 4-ohm speakers that many typical A/V receivers would struggle to drive. Actually, if your receiver has multichannel preamp outputs, you can easily connect the PVA 7 and use it to drive your main, surround, and back surround or height channels. Anthems proprietary and patented circuit designs follow the companys Keep-It-Simple principle, using the fewest number of parts in the signal path to maintain sonic integrity. In addition to its high instantaneous power output, the PVA 7 has the finesse to handle the wide-ranging challenges of movie special effects and demanding musical passages. Product highlights: 105 watts per channel into 8 ohms, 140 watts per channel into 4 ohms for compatibility with even difficult-to-drive speakers Class AB design uses 4 high-current bipolar output transistors per channel for lower distortion custom low-noise, high-power toroidal transformer for stable, noise-free operation Advanced Load Monitoring™ technology monitors internal temperature, current, and voltage to ensure safe, uninterrupted operation 3-way on/off operation: manual, triggered, or signal-sensing auto on/off unbalanced RCA inputs for all seven channels binding post terminals accept bare wire, banana plugs, and spade lugs 3.5mm trigger in/out jacks allow the amplifier to be turned on or off remotely detachable power cord designed, engineered, and manufactured in Canada total harmonic distortion: 0.03% signal-to-noise ratio: 122 dB 17-1/4W x 5-7/8H x 16-3/8D weight: 47.3 lbs.

Anthem PVA-4 4 Channel Power Amplifier. Condition is Used. Shipped with UPS Ground.

Seems like the center channel is bad. No sound out of all the other channels. Not sure what the issue is. Selling for parts thus no return. Very sturdy well made. The blue front panel led turns on I can hear relay click on.

Seems like the center channel is bad. No sound out of all the other channels. Not sure what the issue is. Selling for parts thus no return. Very sturdy well made. The blue front panel led turns on I can hear relay click on.

Anthem PVA 4 Amplifier (as is) Powers on, no other tests were conducted. Defects – cosmetic damage, item has scratches on all sides, shows wear and tear. Item sold as is.Power cords and VGA are not included unless stated otherwise. All of our Desktops, PCs and Laptops will not include Hard Drives. We cannot fully detail our items part by part, please do not expect our items to be perfect. We list our items to the best of our knowledge. NO WARRANTY OR GUARANTEES FOR THIS ITEM, please bid accordingly.We respond to questions Monday through Friday 7a-4p only. Please ask any and all questions prior to bidding.Shipping - We do not ship internationally, we only ship to the contiguous United States. Our shipping days are on Wednesday only, we ship occasionally on Friday. We do offer local pick up in St. Louis, MO, please contact us via eBay if you want to pick up locally.Payment - Payment is due no more than 4 days after you agree to purchase. Since auctions are charged a final value fee if the items sell we are forced to file a non-paying bidder dispute if we dont receive the payment within those 4 days.Return Policy – We do not accept returns for any item, they are listed AS IS and for parts, non-working, please bid accordingly. The item is being sold for Parts or Repair. Sold As Is- No Returns, we will not accept a return or issue refund If it doesnt work or If its too expensive to fix or if the unit doesnt sound or work good. I am including Ebays definitions of what For Parts or Repair means. Here it is, please read: An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, items that are locked or cant be activated, or items missing essential components. See the sellers listing for full details. If you are unsure or dont like these conditions, please do not bid. We are an electronics recycling company and do not test any item further than just attempting to power it on. * WE DO NOT INCLUDE HARD DRIVES WITH ANY COMPUTERS.

This listing is for one Anthem PVA-2 power amplifier. This item is in excellent condition and works properly. No scratches, dings, or dents. All lettering intact. The original packing box, packing, and manual are included with the sale. Also included is a AC power cord. I will package for a safe arrival.

The Anthem PVA5 is a 5-channel power amplifier designed for home audio systems. Made in Canada, it delivers 125 watts of power per channel and features stereo L/R RCA audio inputs and outputs. The black amplifier is from the Anthem brand and is suitable for use with receivers and preamps.

Selling as is. Does not power on. For parts or repair.