Aiwa vintage Amp and Preamp. Aiwa DC Power Stereo Amplifier P30, SA-P30K Specifications Power Output: 35 W + 35 W with 4 ? impedance (0,5% distortion, 20 Hz to 20 kHz) Distortion: 0,02% (1 kHz) Input Sensitivity/Impedance: 560 mV/47 k ? Signal-to-Noise Ratio: 112 dB Damping Factor: more than 30 (8 ?, 1 kHz) Circuit System: DC amp Semiconductors: 4 ICs; 10 Taransitors; 2 FETs; 25 Diodes; 6 LEDs Power Requirements: 220 V, 50/60 Hz Power Consumption: 240 W Dimensions (W x H x D): 250 x 71 x 218 mm Weight: 4,1 kg Aiwa Stereo Preamblifier C30, SA-C30K Specifications Signal-to-Noise Ratio (IHF A curve short circuited): Phono : 87 dB Tuner : 98 dB Aux : 98 dB Tape : 98 dB RIAA Deviation : ±0,2 dB )20 Hz to 20 kHz) Inputs Sensitivity/Impedance Phono : 2,5 mV (200 mV max. input) Tuner, Aux 1, Aux 2 : 150 mV/47 k ? Tape Monitor: Play : 150 mV/47 k ? Rec : 150 mV/47 k ? Output Level/Impedance: 0,8V/47 k ? Tone Controls Bass : ±8 dB at 100 Hz (600 Hz) Treble : ±8 dB at 10 kHz (3,5 kHz) Low Filter: 30 Hz/6 dB/octave Muting: -20 dB Loudness : +7 dB at 100 Hz ; +3,5 dB at 10 kHz (with -40 dB) Semiconductors: 2 ICs; 10 Transistors; 10 Diodes; 5 LEDs Power Requirements: 220 V, 50/60 Hz Power Consumption: 5 W Dimensiond (W x H x D): 250 x 71 x 229,5 mm Weight: 1,85 kg Condition Well used but still in good condition. Tested and ready to go. Some scratches to the casing. One of rubber feet under the Amplifier P30 is missing. Made in the UK including Japanese components. Comes with original old style power cable and converter. (see pictures). Will be carefully packaged and posted within 24 hours of cleared payment.

AIWA P30 STEREO POWER AMPLIFIER + AIWA C30 STEREO PREAMPLIFIER + AIWA R30 STEREO TUNER. BON ETAT GENERAL ET DE FONCTIONNEMENT UN SON TRÈS PUISSANT QUELQUES TRACES VOIR PHOTOS. VOUS ACHETEZ CE QUE VOUS VOYEZ SUR LES PHOTOS. Specifications: AIWA P30Power output: 35 watts per channel into 4? (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.02%Damping factor: 30Input sensitivity: 0.56VSignal to noise ratio: 112dBSpeaker load impedance: 4? (minimum)Semiconductors: 4 x IC, 10 x transistors, 2 x FET, 25 x diodes, 6 x LEDDimensions: 250 x 71 x 218mmWeight: 4.1kgYear: 1980 AIWA C30Frequency response: 20Hz to 20kHzInput sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 87dB (MM), 98dB (line)Output: 150mV (line), 0.8V (Pre out)Semiconductors: 2 x IC, 10 x transistors, 10 x diodes, 5 x LEDDimensions: 250 x 71 x 229.5mmWeight: 1.85kgYear: 1980 AIWA R30Type: Mono/Stereo TunerTuning Bands: FM, MW, LWTuning Scale: DigitalFM Tuning Range: 87.5 to 108 MHzMW Tuning Range: 525 to 1605 kHzLW Tuning Range: 150 to 285 kHzSensitivity: 1.9uV (FM), 30uV (MW), 70uV (LW)Signal to Noise Ratio: 70dB (FM), 50dB (MW), 50dB (LW)Distortion: 0.25% (FM), 0.9% (MW), 0.9% (LW)Selectivity: 70dB (FM), 30dB (MW), 30dB (LW)Frequency response: 30Hz to 15kHz (FM)Semiconductors: 4 x IC, 28 x transistors, 2 x FET, 22 x diodes, 6 x LEDDimensions: 250 x 71 x 255.5mmWeight: 2.2kgYear: 1980 SHIPPING POSSIBLE TO FRANCE, BELGIUM, SPAIN, PORTUGAL, ITALY, LUXEMBOURG, NETHERLANDS, AUSTRIA. OTHER COUNTRIES ASK FOR SHIPPING COSTS BEFORE BUYING

AIWA STEREO AMPLIFIER SA-P30AH ,SA-C30AH Made in Japan AIWA DC STEREO POWER AMPLIFIER P30model no.: SA-P30AH AC 120/220V 50/60Hz POWER CONSUPTION 75W Specifications Poweroutput: 35watts per channel into 4? (stereo) Frequencyresponse: 20Hz to20kHz Totalharmonic distortion: 0.02% Dampingfactor: 30 Inputsensitivity: 0.56V Signal tonoise ratio: 112dB Speakerload impedance: 4? (minimum) Semiconductors: 4 x IC, 10 xtransistors, 2 x FET, 25 x diodes, 6 x LED Dimensions: 250x 71 x 218mm Weight: 4.1kg Year: 1980 AIWA STEREO PREAMPLIFIER C30 modelno.: SA-C30AH AC 120/220V 50/60Hz POWER CONSUMPTION 5W Specifications Frequency response: 20Hzto 20kHz Input sensitivity: 2.5mV(MM), 150mV (line) Signal to noise ratio: 87dB (MM), 98dB (line) Output: 150mV(line), 0.8V (Pre out) Semiconductors: 2x IC, 10 x transistors, 10 x diodes, 5 x LED Dimensions: 250x 71 x 229.5mm Weight: 1.85kg Year: 1980