Bose business music amplifierFreeSpace AmPlus 100 Made in USARevox, Bang & Olufson, Sony, Technics, Linn, Pro Ject, Marantz, Onkyo, Thorens, Optisch mit leichten Gebrauchsspuren, insgesamt aber Gut.Technisch nicht geprüft Bitte beachten Sie die Eingestellten Fotos, diese sind Bestandteil der Artikelbeschreibung. Der Verkauf erfolgt als Bastlergerät, Teileträger bzw. Defektvon Privat, Gewährleistung oder Rücknahme ausgeschlossen. Technische Daten lt. Internet:Bose AmPlus 100Marke: BoseModell: AmPlus 100Technische DatenAusgangsleistungStereo65 W pro Kanal an 4 Ohm50 W an 8 OhmMono70 V, gebrückt: 100 W an 49 Ohm100 V, gebrückt: 100 W an 98 Ohm70 V/4 Ohm: 50 W @ 70-V-Ausgang an 98 Ohm65 W @ Kanal-2-Ausgang an 4 Ohm100 V/4 Ohm: 50 W @ 70-V-Ausgang an 196 Ohm65 W @ Kanal-2-Ausgang an 4 OhmEingangsempfindlichkeit:315 mV erforderlich, um den Verstärker in jeder beliebigen Betriebsart voll auszusteuernEingangsdämpfung: 0 dB bis -8Eingangs-/Ausgangskonfigurationen:1. 2 Kanäle (Stereo)2. Mono bei 4-Ohm-Belastung3. Mono bei 70-V-/100-V-Belastung4. Dual-Mono (1 Quelle/2 Zonen)5. Kanal 1: 70 V/100 V; Kanal 2: 4 OhmEingangsimpedanz:32 kOhm, symmetrisch11 kOhm, unsymmetrischAusgangsimpedanz (Line-Ausgang): 600 OhmVerzerrungen (Line-Ausgang): 0,1%Frequenzgang (aktiver Equalizer überbrückt)4-Ohm-Ausgänge: 40 Hz - 16 kHz, ±1 dB70-V-Ausgänge: 60 Hz - 16 kHz, ±1 dBGesamtklirrfaktor bei Nennleistung4-Ohm-Ausgänge: 1% (40 Hz - 16 kHz)70-V-Ausgänge: 1% (60 Hz - 16 kHz)Brummen und RauschenLine-Ausgänge: 92 dBEndverstärker-Ausgänge: 80 dB unter maximaler Ausgangsleistung bei 4-Ohm-BelastungLED-AnzeigeNetzspannung: FrontplatteBedienelemente:Eingang 1 und 2EingangsabschwächungLautstärke-FernbedienungBaßpegeleinstellung 1 und 2EingangsbetriebsartschalterBetriebsartschalter des VerstärkersFrontseitiger NetzschalterLeistungsaufnahme120 V Wechselstrom, 50/60 Hz, 350 W max220-240 V Wechselstrom, 50/60 Hz, 350 W maxBetriebstemperaturbereich (passiv gekühlt, Lüftungsöffnungen oben und unten): -10° C bis +50° CBesondere Merkmale:Lautstärke-FernbedienungEin-/Ausschalten der StummschaltungClipping-Detektor und -begrenzerKurzschlußschutzGleichspannungsschutzThermische BegrenzungStabil bei BlindbelastungHochfrequenzstörungsschutzInternational als sicher durch UL (6500), CSA (E65) und IEC (65) abgenommen; erfüllt EMC-CE-Normen.BemerkungenWeitere Modelle der gleichen Serie:Bilder

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Good working order, some minor marks through use

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)

Bose AmPlus 100 FreeSpace Verstärker Amplifier Gebraucht, Technisch Einwandfrei Privatverkauf unter Ausschluss jeglicher Garantie und Gewährleistung.Kein Umtausch! Keine Rücknahme!

Das Bose AM PLUS 100 und AM PLUS 50 Verstrker Set ist gebraucht, aber in einwandfreiem Zustand. Das kompakte Sounddeck in elegantem Schwarz ist mit Stereo L/R RCA Audioeingngen und Markenkompatibilitt fr Bose ausgestattet. Genieen Sie ein verbessertes Klangerlebnis fr Ihr Heim-Audio- und HiFi-System mit diesem hochwertigen Verstrker-Set von Bose.

Normal 0 false false false EN-US X-NONE X-NONE Power Output Stereo: 65W per channel into 4? 50W into 8? 70V Bridged Mono: 100W into 49? 100V Bridge Mono: 100W into 98? 70V/4?: 50W @ 70V output into 98? 65W @ Ch. 2 output into 4? 100V/4?: 50W @ 70V output into 196? 65W @ Ch. 2 output into 4? Input Sensitivity 315mV required to drive both channels to full power in any mode. Input Attenuation 0dB to off Input/Output Configurations 1. 2-channel (stereo) 2. Mono into 4? load 3. Mono into 70V/100V load 4. Dual-Mono (1 source/2 zones) 5. Channel 1: 70V/100V; Channel 2: 4? Input Impedance 32k? balanced 11k? unbalanced Line Output Impedance 600? Line Output Distortion ?0.1% Frequency Response (active EQ bypassed) 4? outputs: 40Hz – 16kHz, ±1dB 70V outputs: 60Hz – 16kHz, ±1dB THD @ Rated Power 4? outputs: ?1% THD (40Hz – 16kHz) 70V outputs: ?1% THD (60Hz – 16kHz) Hum and Noise Line outputs: 92dB Power amplifier outputs: 80dB below maximum output with 4? load LED Indicator Power: front panel Controls • Inputs 1 and 2 • Input attenuation • Remote volume • Bass adjust 1 and 2 • Input mode switch • Amplifier mode switch • Front panel power switch AC Power Consumption 120V~AC, 50/60Hz, 350W maximum 220-240V~AC, 50/60Hz, 350W maximum Operating Temperature Range (passively cooled top and bottom vents) 12° F to 120° F (-10° C to +50° C) Special Features • Remote volume control • Turn on/off muting • Clip detector and limiter • Short circuit protection • DC offset protection • Thermal limiting • Stable into reactive loads • RFI protection • International safety approvals under UL-6500, CSA-E65, IEC-65. EMC CE compliance Option Card Accessories • Equalizer (EQ) cards for these loud- speakers: Model 8, Model 25, and Model 32, and for the Model 1B Acousti- mass module • Opti-Source TM card • Opti-voice ® page card Terminations Inputs and outputs are quick connect terminal blocks Desk mount 17W x 10D x 3 3 ? 4H (43.2 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Rack mount – chassis supported 19W x 10D x 3 3? 4H (48.3 cm (W) x 25.4 cm (D) x 9.52 cm (H)) Weight 20 lb (9.1 kg)