Altec 288-18G High Frequency Driver (Pair) Purchased on eBay about 2 years ago, working perfectly until I took my speakers apart because they were to big for a smaller room after a move. As the diaphragms are unmarked, I assume that they are replacements. I will take care of the shipping costs. This is a private sallow, no guarantee for 50 year old speakers

Typ Altec 805 Multizellularhorn (Paar) in Holz von Markus Klug Für 288 Driver Im Januar 2001 von Markus Klug ausgelieferte, weißgebeizte Sonderanfertigung. Die Hörner kommen mit Adaptern für Altec 288.Markus Klug fertigt auch Adapter für andere driver (zB: JBL) an. Näheres auf seiner homepage: https://klughoerner.com/hoerner-typen/500hz/Die Hörner sind leicht verstaubt, aber sonst wie neu.

Altec 288-18G High Frequency Driver (Pair) Purchased on eBay about 2 years ago, working perfectly until I took my speakers apart because they were to big for a smaller room after a move. As the diaphragms are unmarked, I assume that they are replacements. I will take care of the shipping costs. This is a private sallow, no guarantee for 50 year old speakers

Listing is for 1 Altec 288-16K horn speaker driver with aftermarket voice coil. It is heavy. Please see picture for physical condition. If you have question please ask. Thank youPLEASE CHECK OUT MY EBAY STORE FOR MORE ITEMS We are able to combine shipping for our customers who wish to bid on multiple items. We ask that you submit only one payment for all items won and include all of the auction numbers. We try very hard to respond to every question that potential bidders email us but due to the large volume of the email we receive some questions may slip through the cracks. We have included all pertinent information in the description of the auction to minimize email volume. Due to the number of auction we run, we leave positive feedback upon receipt of feedback from our customers. Please do not bid if you cannot honor your commitment. We reserve the right to cancel your bid if we feel you cannot honor your commitment. ALL BIDS ARE BINDING. Sometimes our parts sell in our store before the auction ends, therefore we reserve the right to close our auctions early. This is an auction, therefore, items are not returnable. The items sold are as described above as accurately as possible and are sold as-is. All sales are final. We assume no responsibility for items once they are shipped.

Listing is for 1 Altec 288-16K horn speaker driver with aftermarket voice coil. It is heavy. Please see picture for physical condition. If you have question please ask. Thank youPLEASE CHECK OUT MY EBAY STORE FOR MORE ITEMS We are able to combine shipping for our customers who wish to bid on multiple items. We ask that you submit only one payment for all items won and include all of the auction numbers. We try very hard to respond to every question that potential bidders email us but due to the large volume of the email we receive some questions may slip through the cracks. We have included all pertinent information in the description of the auction to minimize email volume. Due to the number of auction we run, we leave positive feedback upon receipt of feedback from our customers. Please do not bid if you cannot honor your commitment. We reserve the right to cancel your bid if we feel you cannot honor your commitment. ALL BIDS ARE BINDING. Sometimes our parts sell in our store before the auction ends, therefore we reserve the right to close our auctions early. This is an auction, therefore, items are not returnable. The items sold are as described above as accurately as possible and are sold as-is. All sales are final. We assume no responsibility for items once they are shipped.

ALTEC LANSING 24834 Diaphragm Voice Coil for 288 16 ohms (NOS)

Zum Verkauf stehen hier zwei sehr gut erhaltenen Altec Lansing 288 Treiber. Die Treiber haben die identische Seriennummer und augenscheinlich auch noch die ersten Diaphragmen. Die Treiber fanden vor allem für die großen Altec Hörner Verwendung (1505, 1005, 805, 1503,..). Es sind welche der letzten wirklich echten Altec Treiber. Die Treiber funktionieren mit Adaptern natürlich auch für viele andere Hornsysteme. Absoluter Spitzenklang! Die Die Treiber nur als ersatz gedacht waren, möchte ich mich nun trennen. For sale here are two Altec Lansing drivers in very good condition. The drivers have the identical serial number and apparently still have the first diaphragms. The drivers were mainly used for the large Altec horns (1505, 1005, 805, 1503,..). The drivers also work with adapters for many other horn systems. Absolute top sound! As the drivers were only intended as replacements, I would now like to part with them. Shipping within EU 45€ (DHL)Shipping Worldwide 200€ (DHL)

altec 288 driver (1) single parts as is (B)

altec 288 (1) single driver parts as is

altec 288 driver dust cover for (2pieces) . looks Brass,dust cover only not include 288 driver. The thickness is 1mm or less. Thank you

Altec Lansing 212-8a / 288 Duplex Driver.The driver was developed by Bill Hanuschak. He called it The Engine. One magnet structure, virtually time aligned, with a 288 driver on the back. Driver is in great condition, and works. This listing is for the driver, horn mounting hardware for horn, N1285-8b dividing network and altec Lansing badge with hardware.

ATTENTION --------------------1. I canceled the listing because a valued eBay member advised me to prove that the horn itself is working and to show the avometer reading to buyers. I added that avometer picture. The reading is 6.1. So please watch the horn while its working through this safe YouTube link : https://youtube.com/shorts/V_nmMvk2agc 2. I may end the auction early on the last bidder - not the highest bidder. FLAWS (only two) -------------------------------1. Some rust here and there. (pictured) 2. 3 small small chips (pictured) in the outer grey paint or coating. DESCRIPTION -------------------------The sound is playing so well as you see and hear in the video. Dont worry about any damage during transit because I pack extremely well with much THICK SPONGE. Im fully responsible for any damage in transit. Ill pay for it. 3. Please feel completely free to ask for a reduced price if you ARE serious and interested. My prices are ALWAYS negotiable. Im also very friendly and I do my very best to COMFORT and please my customers. SHIPPING Through UPS or DHL from Egypt. To arrive to you in 6 to 7 days. RETURN I dont accept return because my description is very accurate. GOOD LUCK BIDDING

altec 288 driver dust cover for (2pieces) . looks Brass,dust cover only not include 288 driver. The thickness is 1mm or less. Thank you

Verkaufe zwei neue Altec 288, 16 Ohm Diaphragm, wurden noch nie Ausgepackt, siehe Fotos. Gekauft wurden die Diaphragm vor etlichen Jahren in der USA. Waren als Ersatz für meine Westrex Acoustilens Lautsprecher gedacht, habe aber das Projekt nie verwirklicht, daher der Verkauf. Ein weiteres Paar ist ebenfalls noch vorhanden. Schauen Sie die Fotos genau an, dass ist was Sie bekommen.

Altec Lansing 212-8a / 288 Duplex Driver.The driver was developed by Bill Hanuschak. He called it The Engine. One magnet structure, virtually time aligned, with a 288 driver on the back. Driver is in great condition, and works. This listing is for the driver, horn mounting hardware for horn, N1285-8b dividing network and altec Lansing badge with hardware.

2 ALTEC 30170 horn throat (for 1005 1003 288..291…worldwide shipping.

I have one pair of ALTEC 30170 horn throat ORIGINAL (for 1505 1503 288 291). These are hard to find original Altec parts! They are in excellent condition. Why buy copies when you can get the originals here. Thanks for looking!

(2) Altec 288C HF Speaker Driver original 291 Diaphragm 21531 16ohm. guaranteed good condition sound

Altec Lansing 212-8a / 288 Duplex Driver.The driver was developed by Bill Hanuschak. He called it The Engine. One magnet structure, virtually time aligned, with a 288 driver on the back. Driver is in great condition, and works. This listing is for the driver, horn mounting hardware for horn, N1285-8b dividing network and altec Lansing badge with hardware.

2 ALTEC 30170 horn throat (for 1005 1003 288..291…worldwide shipping.

Vintage Altec 288B horn driver. Early wrinkle finish type. Good original diaphragm. Test working good.DCR 10 ohms on my meter, Please check the pictures for more information.

I have one pair of ALTEC 30170 horn throat ORIGINAL (for 1505 1503 288 291). These are hard to find original Altec parts! They are in excellent condition. Why buy copies when you can get the originals here. Thanks for looking!

(2)Altec Lansing 288 / 291 Driver No Cover ( ?as Is ).

This is a pair IPC/Altec 288 drivers. There are some wear and scratches on the surface. The tests are 11.6&11.5 ohms respectively. Very matching. Due to years of non use. Cleaning may be necessary. The weight is approximately 40LB.