Hi I have a Sony Tape path alignment tool for a Sony SX VTR. In mint shape. Model MW-261. I ship to USA 48 Continental States only No International Sales. I will ship this USPS Parcel Select Ground. From a smoke free home. I have been on eBay for 22 years with a perfect 100% Positive Feedback and an Above Average seller rating so please bid with confidence and thanks for looking!

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

Hi I have a Sony Tape path alignment tool for a Sony SX VTR. In mint shape. Model MW-261. I ship to USA 48 Continental States only No International Sales. I will ship this USPS Parcel Select Ground. From a smoke free home. I have been on eBay for 22 years with a perfect 100% Positive Feedback and an Above Average seller rating so please bid with confidence and thanks for looking!

Sony TC-K7B II cassette deck Serviced with tape path alignment excellent condition throughout

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

Hi I have a Sony Tape path alignment tool for a Sony SX VTR. In mint shape. Model MW-261. I ship to USA 48 Continental States only No International Sales. I will ship this USPS Parcel Select Ground. From a smoke free home. I have been on eBay for 22 years with a perfect 100% Positive Feedback and an Above Average seller rating so please bid with confidence and thanks for looking!

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

-New-LOOK to pictures for exact information regarding this item and its condition. Shipping Combine purchases and save on shipping. All orders are processed and shipped within 5 business days of receipt of payment. Shipping cost - 9.99 USD and plus 1.60 USD for each additional cassette

Sony TC-K7B II cassette deck Serviced with tape path alignment excellent condition throughout

==== JapanPosts Temporary Airmail Service Status ==== LATEST UPDATE on 20 January 2023: 1. The small packet by airmail service is already resumed to the address in: Netherlands, Belgium, Sweden, Austria, Czech, Estonia, Latvia, Bulgaria, Lithuania, Slovakia, Italy, Spain, Norway, Ukraine, China, Malaysia, Australia, Romania, Kazakhstan, or some other countries. 2. If your shipping address is in USA, Canada, UK, Germany, or France, JapanPost temporally accepts airmails by Letter category only. Please DO NOT PAY BEFORE I SEND AN INVOICE with the proper shipping fee as below: Under 100g (1 cassette tape): 9.80 USD (to USA, Canada, UK, Germany, France) Under 250g (2 - 3 cassette tapes): 13.50 USD (to USA, Canada, UK, Germany, France) Under 500g (3 - 6 cassette tapes): 17.70 USD (to USA, Canada, UK, Germany, France) Under 1.0Kg (6 - about 12 cassette tapes): 29.10 USD (to USA, Canada, UK, Germany, France) Under 2.0Kg (about 13 - about 25 cassette tapes): 45.00 USD (to USA, Canada, UK, Germany, France) 3. JapanPost still cannot get sufficient logistics by direct air-cargo to India, Russia, Belarus, and some other countries. Please be patient enough to wait for their resume. If you think you cannot wait, NEVER PUT YOUR BID. I am very sorry for this inconvenience. My tapes are NOT mint. If you hope mint condition on the tapes, NEVER bid for my items. I do not accept zero-feedback bidders any more. No exemption! No mercy!! When I see a zero-feedback bidder already bid, I will delete the bid at once, and will ban him/her in the black list. ?new/old: ( x )sealed ( )opened-unused ( )used ?rarity: ( x )legendary ( )ultra-rare ( )rare ( )usual ( )give-away ?market: ( )US/EU ( x )Japan ( )others ?type: ( x ) I /normal ( ) II /high ( ) III /Fe-Cr ( ) IV /metal ( )accessory ?case: ( )paper ( x )normal & sharp-edged ( )normal & round-edged ( )slim ( )colored ( )designed special ?condition : ( 5 )seal ( 5 )case ( 5 )cassette half ( s )ribbon ( 5 )write-protect tabs ( u )card ( 5 )labels ( u )additional labels Perfect condition! Nearly mint ;O) This is a very rare UD alignment tape named UD122, but this does not mean 122 minutes tape, but is just a product number. It is an alignment tape of UD60. Shipping only by JP(Japan Post) services with Registered Tracking Number The registered tracking number will be provided to the buyer, and I will not be responsible for any damage and custom procedures after dispatch. I can combine (update) invoices of 4 weeks purchases maximum if you want to combine shipping. In detail, see below. I can dispatch packets/parcels on Wednesday, Thursday, and Friday. I need whole one day to pack the items. Please pay or make a dispatch order one day before at latest. If you pay on Friday, I will dispatch on the next Wednesday. Shipping Fees & Combined Shipping Fees The fees shown in the shipping tab may not be correct, because eBays shipping fee management does not handle from outside US to outside US. The actual shipping fees: SEE BELOW!! The winner, please wait for my invoice with the correct shipping fee. Standard Shipping (Small Packet + Tracking Number): Will be insured up to 6,000 JPY (= approx. 60 USD) maximum per packet. If you instruct me the custom declaration amount lower than the actual one, no one can be responsible to more than the amount you suggest. Will be delivered usually in 5-10 business days after dispatch. This duration will vary depending on the recipients custom procedure. 1 cassette tape: 8.70 USD (to Asia), 9.90 USD (to Canada, Middle America, Europe, Oceania, or Middle East), 10.30 USD (to South America), 14.40 USD (to USA or US Territories) 2 cassette tapes: 9.80 USD (to Asia), 11.40 USD (to Canada, Middle America, Europe, Oceania, or Middle East), 12.50 USD (to South America), 16.00 USD (to USA or US Territories) 3 cassette tapes: 10.90 USD (to Asia), 12.90 USD (to Canada, Middle America, Europe, Oceania, or Middle East), 14.80 USD (to South America), 17.70 USD (to USA or US Territories) 4 cassette tapes: 12.00 USD (to Asia), 14.40 USD (to Canada, Middle America, Europe, Oceania, or Middle East), 17.00 USD (to South America), 19.30 USD (to USA or US Territories) 5 cassette tapes: 13.20 USD (to Asia), 15.90 USD (to Canada, Middle America, Europe, Oceania, or Middle East), 19.30 USD (to South America), 20.90 USD (to USA or US Territories) 6 cassette tapes and above: Please ask or see below. Domestic shipping inside Japan: Please ask. Maximum weight is 2.0Kg. Weight unit is 100g. Every additional 100g will increase approx. +1.10 USD (to Asia), +1.40 USD (to Canada, Middle America, Europe, Oceania, or Middle East), +2.10 USD (to South America), +1.60USD (to USA or US territories) Examples: 1.0Kg: approx 12 tapes. 18.80 USD (to Asia), 23.40 USD (to Canada, Middle America, Europe, Oceania, or Middle East), 30.50 USD (to South America), 29.00 USD (to USA or US territories) 2.0Kg: approx 25 tapes. 30.00 USD (to Asia), 38.40 USD (to Canada, Middle America, Europe, Oceania, or Middle East), 53.00 USD (to South America), 45.30 USD (to USA or US territories)Expedited Shipping (EMS with Tracking Number): Expedited shipping by International EMS is provided, but the availability depends on your shipping address. Even if it is available, JapanPost collects surcharge caused by worlds insufficiency of maritime transport ship. The surcharge amount depends on the country you live, and will change often. If you prefer EMS shipping, please ask through the personal message before paying. (Roughly calculating, the EMS Shipping fee is 2 to 3 times as high as the Standard Shipping fee at this moment.) Combined Shipping Instruction 1. Items which you have just won in a day only: Just wait for my invoice, which shows the combined shipping fee. 2. Items which you have just won + which you may win in coming future weeks: Option-A: Tell me your idea. Then I can combine invoices of 4 weeks purchases at maximum. (eBay invoices cannot be updated if they include sales older than 1 month.) Option-B: Balance the single invoice, and tell me NOT to dispatch your items yet. In the next invoice with the additional purchases, the shipping fee will be just an adjustment. Whichever option you choose, the total combined shipping fee you finally pay will be the same minimized ;O)

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

TDK Blank Cassette Alignment Tape AC-223 AC-512 AC-712 For AD SA MA Japan. Blank alignment/calibration tape from TDK, set of 3 for all three types of cassettes. Sealed, never used. Sold as is.

Normal 0 false false false EN-GB X-NONE X-NONE GREETINGS! HAVING A CLEAR-OUT… THIS AUCTION IS FOR A ALIGNMENT PANEL FOR A ~ SONY – APR-5000 PROFESSIONAL / BROADCAST TAPE RECORDER. IT HAS SOME SLIGHT DAMAGE (SCRAPES) WHERE THE P.S.U. HAS CARELESSLY BEEN DRAGGED OVER IT WHILST SOMEONE HAS BEEN SERVICING THE MACHINE (SEE PIC’S.). USEFUL IF YOURS IS WORSE THAN THIS ONE. ***RARE*** WHERE WOULD YOU FIND ONE THESE-DAYS? *** I USE CHEAPEST POSTAGE POSSIBLE UNLESS REQUESTED OTHERWISE! *** ** I ESTIMATE £8 POSTAGE TO UK ON THIS ITEM, BUT WILL REFUND IF LESS. ** ***** INTERNATIONAL BIDDERS:- CONTACT ME BEFORE BIDDING FOR SHIPPING OPTIONS PLEASE! ***** ~~~THANKS FOR LOOKING!~~~

NEDIS Video Alignment Tape MB-SWISS 1 Hifi Service Test Kassette ORIGINAL!! Sehr selten zu bekommen Sehr guter Zustand, siehe Bilder. Zustand wie abgebildet siehe Bilder. Bitte beachten Sie die Bilder, diese sind Teil der Artikelbeschreibung. Lieferumfang wie abgebildet Nur die Kassette mit Hülle und Papier wie abgebildet ! Ohne weiteres Zubehör! Worldwide Shipping! Please ask the shipping Price to your Country : ) ! Versandkosten beziehen sich auf den Versand innerhalb Deutschlands Internationale Versandkosten bitte vor dem Kauf erfragen!

Hi I have a Sony Tape path alignment tool for a Sony SX VTR. In mint shape. Model MW-261. I ship to USA 48 Continental States only No International Sales. I will ship this USPS Parcel Select Ground. From a smoke free home. I have been on eBay for 22 years with a perfect 100% Positive Feedback and an Above Average seller rating so please bid with confidence and thanks for looking!

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

Vintage NORTRONICS AT-100 Azimuth & Amplifier Alignment reference tapePlays at 7.5 IPSFor Full, 2 track, 4 track Mono or StereoSee front of box for more info about reference oscillator tonesTape is clean as well as boxHas instruction sheet as well as sales receipt with unknown date

Burosch Video Alignment Tape VAT-60 Hifi Service Test Adjust Kassette ORIGINAL!! Sehr selten zu bekommen Sehr guter Zustand, siehe Bilder. Zustand wie abgebildet siehe Bilder. Bitte beachten Sie die Bilder, diese sind Teil der Artikelbeschreibung. Lieferumfang wie abgebildet Nur die Kassette ! Ohne weiteres Zubehör! Worldwide Shipping! Please ask the shipping Price to your Country : ) ! Versandkosten beziehen sich auf den Versand innerhalb Deutschlands Internationale Versandkosten bitte vor dem Kauf erfragen!

JVC MH-2 Video Alignment Tape Hifi Service Test Kassette ORIGINAL!! Sehr selten zu bekommen Sehr guter Zustand, siehe Bilder. Zustand wie abgebildet siehe Bilder. Bitte beachten Sie die Bilder, diese sind Teil der Artikelbeschreibung. Lieferumfang wie abgebildet Nur die Kassette mit Hülle wie abgebildet ! Ohne weiteres Zubehör! Worldwide Shipping! Please ask the shipping Price to your Country : ) ! Versandkosten beziehen sich auf den Versand innerhalb Deutschlands Internationale Versandkosten bitte vor dem Kauf erfragen!

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.