Guten Tag, ich verkaufe ein TEAC Mirror Tape Test Alignment Tape, Modell MTT-901. Ein Path Checker, also Verlaufsüberprüfer: Sehr praktisch, um sicherzustellen, dass das Band gerade verläuft, auf dem Tonkopf und im gesamten Bandtransportsystem. Dazu kann man auch überprüfen, ob der Tonkopf auf dem Band richtig sitzt, also weder zu hoch noch zu tief. Ideal für jeden, der Tapedecks optimieren möchte. TEAC hat einen Spiegel mit einem gewissen Winkel in der Kassette angebracht. Somit kann man den Bandverlauf sehen. Einfach aber genial. Selten zu finden, besonders in diesem guten Zustand. Abholung in Glienicke Nordbahn bei Berlin oder Versand. Wir sind ein tierfreier, Nichtraucherhaushalt.Privatverkauf: keine Rücknahme und keine Garantie. Ich versichere aber die Richtigkeit meiner Angaben.Bitte beachten Sie meine weiteren Angebote. Vielen Dank.Mit freundlichen GrüßenBenjamin Daubigney

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

800x600 Normal 0 false false false EL X-NONE X-NONE MicrosoftInternetExplorer4 .

My tapes are NOT mint. If you hope mint condition on the tapes, NEVER bid for my items. I do not accept zero-feedback bidders. Their bids will be deleted, and they will be put in the block list. No exemption! ?new/old: ( x )sealed ( )opened-unused ( )used ?rarity: ( x )legendary ( )ultra-rare ( )rare ( )average ( )give-away ?market: ( )US/EU ( x )Japan ( )others ?type: ( x ) I /normal ( ) II /high ( ) III /Fe-Cr ( ) IV /metal ( )accessory ?case: ( )paper ( x )normal & sharp-edged ( )normal & round-edged ( )slim ( )colored ( )designed special ?condition : ( 5 )seal ( 5 )case ( s )cassette half ( s )ribbon ( s )write-protect tabs ( s )card ( s )labels ( s )additional labels Perfect condition! Nearly mint ;O) This is Maxells very rare not-for-sale cassette tape for alignment use, and is titled UD122 as its product number, but 122 does not mean its recording time capacity. It is the alignment tape version of UD 60. Shipping only by JP(Japan Post) services with Registered Tracking Number The registered tracking number will be provided to the buyer, and I will not be responsible for any damage and custom procedures after dispatch. I can combine (update) invoices of 4 weeks purchases maximum if you want to combine shipping. In detail, see below. I can dispatch packets/parcels on Wednesday, Thursday, and Friday. I need whole one day to pack the items. Please pay or make a dispatch order one day before at latest. If you pay on Friday, I will dispatch on the next Wednesday. Shipping Fees & Combined Shipping Fees The fees shown in the shipping tab may not be correct, because eBays shipping fee management does not handle from outside US to outside US. The actual shipping fees: SEE BELOW!! The winner, please wait for my invoice with the correct shipping fee. Standard Shipping (Small Packet + Tracking Number): Will be insured up to 6,000 JPY (= approx. 60 USD) maximum per packet. If you instruct me the custom declaration amount lower than the actual one, no one can be responsible to more than the amount you suggest. Will be delivered usually in 5-10 business days after dispatch. This duration will vary depending on the recipients custom procedure. 1 cassette tape: 9.50 USD (to Taiwan, South Korea, China), 9.90 USD (to other Asia), 11.40 USD (to Europe, Oceania, Canada, Mexico, Middle East), 15.20 USD (to USA,or US territories), 11.90 USD (to Middle & South America, Africa) 2 cassette tapes: 10.70 USD (to Taiwan, South Korea, Cina), 11.30 USD (to other Asia), 13.50 USD (to Europe, Oceania, Canada, Mexico, Middle East), 17.70 USD (to USA or US territories), 15.00 USD (to Middle & South America, Africa) 3 cassette tapes: 11.90 USD (to Taiwan, South Korea, China), 12.70 USD (to other Asia), 15.60 USD (to Europe, Oceania, Canada, Mexico, Middle East), 20.10 USD (to USA or US territories), 18.00 USD (to Middle & South America, Africa) 4 cassette tapes: 13.10 USD (to Taiwan, South Korea, China), 14.10 USD (to other Asia), 17.70 USD (to Europe, Oceania, Canada, Mexico, Middle East), 22.60 USD (to USA or US territories), 21.10 USD (to Middle & South America, Africa) 5 cassette tapes: 14.30 USD (to Taiwan, South Korea, China), 15.50 USD (to other Asia), 19.80 USD (to Europe, Oceania, Canada, Mexico, Middle East), 25.10 USD (to USA or US territories) , 24.20 USD (to Middle & South America, Africa) 6 cassette tapes and above: Please ask or see below. Domestic shipping inside Japan: Please ask. Special Exception!! The shipping fees by Letter category are still lower than by Small Packet only in the cases as below: 1 cassette tape: 10.40 USD (to Europe, Oceania, Canada, Mexico, Middle East), 10.40 USD (to USA,or US territories) 2 cassette tapes: 13.90 USD (to USA or US territories) Maximum weight is 2.0Kg. Weight unit is 100g. Every additional 100g will increase approx. +1.20 USD (to Taiwan, South Korea, China), +1.40 USD (to other Asia), +2.10 USD (to Europe, Oceania, Canada, Mexico, Middle East), +2.50 USD (to USA or US territories), +3.10 USD (to Middle & South America, Africa) Examples: 1.0Kg: approx 12 tapes. 20.10 USD (to Taiwan, South Korea, China), 22.60 USD (to other Asia), 30.50 USD (to Europe, Oceania, Canada, Mexico, Middle East), 37.40 USD (to USA or US territories), 39.40 USD (to Middle & South America, Africa) 2.0Kg: approx 25 tapes. 31.90 USD (to Taiwan, South Korea, China), 36.70 USD (to other Asia), 51.60 USD (to Europe, Oceania, Canada, Mexico, Middle East), 62.10 USD (to USA or US territories), 70.00 USD (to Middle & South America, Africa) Expedited Shipping (EMS with Tracking Number): Expedited shipping by International EMS is provided, but the availability depends on your shipping address. Even if it is available, JapanPost collects surcharge caused by worlds insufficiency of maritime transport ship. The surcharge amount depends on the country you live, and will change often. If you prefer EMS shipping, please ask through the personal message before paying. (Roughly calculating, the EMS Shipping fee is 2 to 3 times as high as the Standard Shipping fee at this moment.) Combined Shipping Instruction 1. Items which you have just won in a day only: Just wait for my invoice, which shows the combined shipping fee. 2. Items which you have just won + which you may win in coming future weeks: Option-A: Tell me your idea. Then I can combine invoices of 4 weeks purchases at maximum. (eBay invoices cannot be updated if they include sales older than 1 month.) Option-B: Balance the single invoice, and tell me NOT to dispatch your items yet. In the next invoice with the additional purchases, the shipping fee will be just an adjustment. Whichever option you choose, the total combined shipping fee you finally pay will be the same minimized ;O)

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

VHS 400Hz Stereo alignment tape Used but good condition. From B&O. Shipping price is ONLY for EU mainlands, not Cyprus, Iceland, Greenland, Faroe Islands etc., here you have to ask for shipping price. Shipping world wide is possible - ask for shipping price. Please send email and phone number after buying - I need both for the shipping label!

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

Sony 8mm Alignment Tape.

lot of nakamichi calibration azimuth level, Wow, speed tapes.

Sony 8mm Alignment Tape.

Sony 8mm Alignment Tape.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

Sony 8mm Alignment Tape.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

Sony 8mm Alignment Tape.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.

MASTER CD STEREO Wide Band Tape Recorder Overall Frequency Response STANDARD ALIGNMENT DISK Version 3.00. This disk, priced at $35.00 in combination with any CD player will replace a precision audio signal generator which can cost thousands of dollars.It contains minimum necessary signals to test and adjust the Recording portion of any tape recorder to “flat” Frequency Response balance within wide 31.5Hz - 20kHz frequency range.The following procedure must be followed.Connect your CD player output to the input of the tape recorder under test. Select the particular brand and type of tape you plan to use. Using a blank reel (cassette) of this tape, perform the following series of adjustments in the following sequence: First, adjust the recording Level to 0-VU using Track 2, 1kHz signal. Next, adjust the recording head Azimuth for maximum output signal using Track 3 and Track 4, 8kHz and 15kHz tones monitoring recorded signal. Then, adjust the bias control for optimum flatness using Track 5, 1kHz-10kHz-100Hz tone sequence monitoring recorded signal. Next, adjust the noise balance control (if any) for minimum noise (no signal). Then, using Track 6 to Track 21, 31.5Hz-20kHz -20dB tones recorded on the CD adjust the recording equalizer of the tape recorder for most uniform 31.5Hz-20kHz frequency response monitoring recorded signal. Finally, adjust 0-VU level using Track 22, 1kHz 0dB tone monitoring recorded signal.The Master Disk is recorded with 0.002% Total Harmonic Distortion measured at 1kHz using industrial recording and test equipment.Each master track is recorded individually22 tracks 56 minutes including:Track 1. Procedures. Track 2. 1kHz, 0dBref (-12 dBmax), Stereo, 30 minutes. Track 3. 8kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 4. 15kHz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 5. 1kHz-10kHz-100Hz, -20dBref (-32 dBmax), Stereo, 10 minutes. Track 6. Reference 400Hz, -20dBref (-32 dBmax), Stereo, 20 seconds. Track 7-21. 31.5, 50, 100, 200, 400, 800Hz, 1, 2, 4, 8, 10, 12.5, 15, 18, 20kHz -20dBref (-32 dBmax), Stereo, 20 seconds each tone. Track 22. 1kHz, 0dBref (-12 dBmax), Stereo, 10 minutes.