Biete eine Plattenspieler von Aiwa Modell LX-110 Der Aiwa funktioniert einwandfrei. Nadel ist noch sehr gut. Vollautomatische programmierbare Plattenspieler. Aiwa LX-110 ist ein programmierbarer direkt angetriebener Plattenspieler mit Tangential-Tonarm. Im automatischen Abspielmodus detektiert eine im Tonarm neben der Abtastnadel angeordnete Lichtschranke (Disc Sensor) die Plattengrösse, die Positionen der Einlaufrille und der Leerrillen zwischen den Modulationsstellen (Tracks). Die Reihenfolge der Stücke ist damit programmierbar. Plattenspielerabschnitt: Antriebssystem: Frequenzgeneriertes Direktantriebssystem Motor: 4-Phasen-8-poliger Lineardrehmoment DD-Hallmotor Plattenplatte: Aluminiumlegierung Druckguss Geschwindigkeiten: 33 1/3 und 45 U/min Wow & Flattern: 0,03 % (WRMS) S/N-Verhältnis: 75 dB (DIN-B) Tonarm-Abschnitt: Lineares Tracking, gerader statischer symmetrischer Typ Effektive Armlänge: 131 mm Patronensystem: VM-Typ Frequenzgang: 20...20.000 Hz Ausgangsspannung: 2,3 +1,5/-0,5 mV (@ 1 kHz 3,54 cm/s) Stiftdruck: 1,5 +/- 0,3 g Ersatzstift: AN-70 (Diamant 0,6 Mil Spitze). 25 Transistoren und 4 ICs aufgelistet, einen pro Typ und nicht alle. Keine Garantie oder Rücknahme Versandkosten 6,75€ mit Hermes

Biete eine Plattenspieler von Aiwa Modell LX-110 Der Aiwa funktioniert einwandfrei. Nadel ist noch sehr gut. Vollautomatische programmierbare Plattenspieler. Aiwa LX-110 ist ein programmierbarer direkt angetriebener Plattenspieler mit Tangential-Tonarm. Im automatischen Abspielmodus detektiert eine im Tonarm neben der Abtastnadel angeordnete Lichtschranke (Disc Sensor) die Plattengrösse, die Positionen der Einlaufrille und der Leerrillen zwischen den Modulationsstellen (Tracks). Die Reihenfolge der Stücke ist damit programmierbar. Plattenspielerabschnitt: Antriebssystem: Frequenzgeneriertes Direktantriebssystem Motor: 4-Phasen-8-poliger Lineardrehmoment DD-Hallmotor Plattenplatte: Aluminiumlegierung Druckguss Geschwindigkeiten: 33 1/3 und 45 U/min Wow & Flattern: 0,03 % (WRMS) S/N-Verhältnis: 75 dB (DIN-B) Tonarm-Abschnitt: Lineares Tracking, gerader statischer symmetrischer Typ Effektive Armlänge: 131 mm Patronensystem: VM-Typ Frequenzgang: 20...20.000 Hz Ausgangsspannung: 2,3 +1,5/-0,5 mV (@ 1 kHz 3,54 cm/s) Stiftdruck: 1,5 +/- 0,3 g Ersatzstift: AN-70 (Diamant 0,6 Mil Spitze). 25 Transistoren und 4 ICs aufgelistet, einen pro Typ und nicht alle. Keine Garantie oder Rücknahme Versandkosten 6,75€ mit Hermes

Aiwa LX-110 Direct Drive Linear Tracking Turntable Automatic PARTS/ REPAIR READ! Unit powers on, record spins, arm moves but does not drop down. Sounds like it is trying to drop down but does not. Have not tested any sound or outputs at all. There is some scuffs on lid. Base has a surface rust patch as shown. This unit is being sold AS-IS with no warranty or guarantee. You agree that you are purchasing this unit because you need parts from it or you think that you can repair it at your time and expense. Please do not message us about price, offers or shipping as these questions will be ignored. If we accept offers the best offer option will be on. Estimated delivery time is shown at time of purchase and will not change.

Complete set from 1984 Woofers need new foam cassette deck need to be rebuilt and turn table has turned but I cant seem to get any sound and needle has not touched record. It sounds good and needs some love. Will you be the one to give it what it needs

Complete set from 1984 Woofers need new foam cassette deck need to be rebuilt and turn table has turned but I cant seem to get any sound and needle has not touched record. It sounds good and needs some love. Will you be the one to give it what it needs

Aiwa LX-110 Direct Drive Linear Tracking Turntable Automatic PARTS/ REPAIR READ! Unit powers on, record spins, arm moves but does not drop down. Sounds like it is trying to drop down but does not. Have not tested any sound or outputs at all. There is some scuffs on lid. Base has a surface rust patch as shown. This unit is being sold AS-IS with no warranty or guarantee. You agree that you are purchasing this unit because you need parts from it or you think that you can repair it at your time and expense. Please do not message us about price, offers or shipping as these questions will be ignored. If we accept offers the best offer option will be on. Estimated delivery time is shown at time of purchase and will not change.

Complete set from 1984 Woofers need new foam cassette deck need to be rebuilt and turn table has turned but I cant seem to get any sound and needle has not touched record. It sounds good and needs some love. Will you be the one to give it what it needs

This vintage turntable from Aiwa, model LX-110, was manufactured in Japan in 1984. It features direct drive, 2 motors, full automatic, and linear tracking, with a configuration of 33,3 RPM and 45 RPM. The unit has stereo L/R RCA audio outputs and 2 RCA connectivity. The color is black, and it comes with one unit. This Aiwa is sold for parts only. It powers on but only makes a noise with no moving parts - untested in any other way other than plugging it in. For parts only and sold AS IS. It has amazing features and is a rare turntable once repaired.

Complete set from 1984 Woofers need new foam cassette deck need to be rebuilt and turn table has turned but I cant seem to get any sound and needle has not touched record. It sounds good and needs some love. Will you be the one to give it what it needs

Up for consideration is an Aiwa LX-110 as pictured. When turned on the platter spins and the arm moves back and forth and then stops about where you would play a 33 & 1/3 LP. There is no stylus, also the speed button is missing no idea what the current speed is. It seems to be all there. Cover isnt the best but may polish up a bit. SOLD as a parts unit or repair only. Any ??? please ask and thanks for looking. Shipping is calculated to your location, I add $ 1.99 for materials and handling

Complete set from 1984 Woofers need new foam cassette deck need to be rebuilt and turn table has turned but I cant seem to get any sound and needle has not touched record. It sounds good and needs some love. Will you be the one to give it what it needs

Up for consideration is an Aiwa LX-110 as pictured. When turned on the platter spins and the arm moves back and forth and then stops about where you would play a 33 & 1/3 LP. There is no stylus, also the speed button is missing no idea what the current speed is. It seems to be all there. Cover isnt the best but may polish up a bit. SOLD as a parts unit or repair only. Any ??? please ask and thanks for looking. Shipping is calculated to your location, I add $ 1.99 for materials and handling

Complete set from 1984 Woofers need new foam cassette deck need to be rebuilt and turn table has turned but I cant seem to get any sound and needle has not touched record. It sounds good and needs some love. Will you be the one to give it what it needs

Up for consideration is an Aiwa LX-110 as pictured. When turned on the platter spins and the arm moves back and forth and then stops about where you would play a 33 & 1/3 LP. There is no stylus, also the speed button is missing no idea what the current speed is. It seems to be all there. Cover isnt the best but may polish up a bit. SOLD as a parts unit or repair only. Any ??? please ask and thanks for looking. Shipping is calculated to your location, I add $ 1.99 for materials and handling

Complete set from 1984 Woofers need new foam cassette deck need to be rebuilt and turn table has turned but I cant seem to get any sound and needle has not touched record. It sounds good and needs some love. Will you be the one to give it what it needs

Complete set from 1984 Woofers need new foam cassette deck need to be rebuilt and turn table has turned but I cant seem to get any sound and needle has not touched record. It sounds good and needs some love. Will you be the one to give it what it needs

This Turntable is for parts or repair, it turns on and makes noise. It just makes a humming noise and I cant figure out whats going on with it. I have never used it and I dont know much about it. It just sounds like a motor is running and I couldnt make any buttons do anything. So I am selling it as for parts or repair. This vintage Aiwa LX-110 record player is a must-have for any turntable enthusiast. With its direct drive and linear tracking capabilities, its sure to provide high-quality audio output for your collection. The player has a sleek black finish and comes with stereo L/R RCA audio outputs for easy connectivity. The turntable is compatible with both 45RPM and 33.3RPM speed settings and was manufactured in the 1980s. Its a great addition to any home audio setup and is perfect for those looking to add a touch of retro charm to their listening experience. Will ship within two business days of item being paid for. No returns Please do not ask to ship to any address other than the one listed on your eBay account. If you want to see more pictures of the item please ask before purchasing, I will be more then happy to communicate with you and Send you more pictures. Thank you for your purchase and have a wonderful day.

Up for consideration is an Aiwa LX-110 as pictured. When turned on the platter spins and the arm moves back and forth and then stops about where you would play a 33 & 1/3 LP. There is no stylus, also the speed button is missing no idea what the current speed is. It seems to be all there. Cover isnt the best but may polish up a bit. SOLD as a parts unit or repair only. Any ??? please ask and thanks for looking. Shipping is calculated to your location, I add $ 1.99 for materials and handling

Up for consideration is an Aiwa LX-110 as pictured. When turned on the platter spins and the arm moves back and forth and then stops about where you would play a 33 & 1/3 LP. There is no stylus, also the speed button is missing no idea what the current speed is. It seems to be all there. Cover isnt the best but may polish up a bit. SOLD as a parts unit or repair only. Any ??? please ask and thanks for looking. Shipping is calculated to your location, I add $ 1.99 for materials and handling

Up for consideration is an Aiwa LX-110 as pictured. When turned on the platter spins and the arm moves back and forth and then stops about where you would play a 33 & 1/3 LP. There is no stylus, also the speed button is missing no idea what the current speed is. It seems to be all there. Cover isnt the best but may polish up a bit. SOLD as a parts unit or repair only. Any ??? please ask and thanks for looking. Shipping is calculated to your location, I add $ 1.99 for materials and handling

The record spins I just cant get the arm to function. Needle seems good and will play when arm is manually moved over to record. Sold as is for parts, its a very nice turntable when everything is functioning. Also please note that output RCAs were cut and a 3.5 mm plug now carries the music...can plug directly into a receiver as is or utilize a Female 3.5mm input to RCA adapter and connect the traditional way with RCAs

This vintage turntable from Aiwa, model LX-110, was manufactured in Japan in 1984. It features direct drive, 2 motors, full automatic, and linear tracking, with a configuration of 33,3 RPM and 45 RPM. The unit has stereo L/R RCA audio outputs and 2 RCA connectivity. The color is black, and it comes with one unit. This Aiwa is sold for parts only. It powers on but only makes a noise with no moving parts - untested in any other way other than plugging it in. For parts only and sold AS IS. It has amazing features and is a rare turntable once repaired.

Not working. Power on and speed strob light come on. Complete. Needle broken off. Scratches. For repair or for parts.

Aiwa LX-110. Totalmente funcional. Se enva video antes del envo.