DescriptionModel Accuphase Stereo Control AmplifierFrequency characteristics High level input: 20Hz to 20000Hz, +0 -0.2dBDISC and MIC input: 20Hz to 20000Hz, ±0.2dBHarmonic distortion rate 0.05% or less (between 20Hz and 20000Hz, at rated output)Input sensitivity/input impedance DISC1: 2~6mV/20k?, 30k?, 47k?DISC2: 2~6mV/47k?MIC:2mV/47k?Tuner:200mV/130k?AUX1, 2, Front: 200mV/130k?Tape Play1, 2, Front: 200mV/130k?Rated output/output impedance Main Output:2.0V/200?Headphones: 0.4V/0.3? (maximum volume adjustment, at rated input)Tape Rec Output1, 2, Front: 200mV/200? (at DISC input)Mono Output:0.42V/38k?Maximum output level 10V or more (distortion rate 0.05%)Disc maximum input 400mV to 1.2Vrms (1kHz, distortion 0.05%)*400mV is the maximum DISC level control (equalizer gain 40dB)*1.2V is the minimum DISC level control (equalizer gain 30dB)Gain from Tuner, AUX, Tape Play inputs?Tape Rec Output:Main Output:Headphone: 0dB20dB6dBFrom DISC1, 2, MIC input?Tape Rec Output:Main Output:Headphone: 40dB60dB46dBS/N (rated output, maximum volume adjustment) Tuner, AUX, Tape Play: 90dB or more (rated input)DISC, MIC: 74dB or more (10mV input)Volume adjustment interlock error within 1dBtone controlLow range: Change point 400Hz:200Hz: ±10dB(100Hz)±10dB(50Hz)High range: Change point 2.5kHz:5kHz: ±10dB(10kHz)±10dB(20kHz)DISC low enhancement (volume compensation circuit) 0dB, +0.5dB, +1dB (100Hz) relative to RIAA standard characteristicsCompensator (volume adjustment -30dB) 50Hz:+10dBFilter DISC subsonic filter: 25Hz, 6dB/octLow filter: 30Hz, 12dB/octHigh filter: 5kHz, 12dB/octSemiconductor used: Transistor: 80Diode:35Power supply 100V, 117V, 220V, 240V, 50Hz/60HzPower consumption 36WExternal dimensions Width 445x Height 152x Depth 355mmWeight 14kgIf you want other products please contact us PaymentPlease pay within 5 days after the auction closed.Shipping1-10 business days to ship (not including Saturdays, Sundays, and holidays)ReturnsReturns are accepted ONLY if the item was not the item described.International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

DescriptionType Stereo power amplifierRated Output(Both channels driven, 20Hz to 20kHz, distortion ratio 0.1%) 4? load: 200W/ch8? load: 150W/ch16? load: 75W/chHarmonic distortion (20Hz to 20kHz) at rated output:0.1% or lessAt -3dB output:0.05% max.0.1% or less at 50mW outputIM distortion: 0.1% or less (at rated output)Frequency response (8 ohm load) 20Hz to 20000Hz +0 -0.2dBDamping factor 20 or better (8? load, between 20Hz and 20kHz)Rated input/input impedance 1.0V/100k?S/N ratio (at rated output) 100dB or betterStereo headphones, low output impedance typeAudio bandpass filter 17Hz and below, 24kHz and above, 18dB/octPower limiter Full power, 1/2, 1/4, switchableSemiconductors Transistors: 73Diodes: 88Thermistors: 2IC: 1 pc.Power supply 100, 117, 220, 240V/50 to 60HzPower consumption: 100W with no inputAt rated output into 8? load: 510WDimensions: W 445 x H 152 x D 355mmWeight 25kgIf you want other products please contact us PaymentPlease pay within 5 days after the auction closed.Shipping1-10 business days to ship (not including Saturdays, Sundays, and holidays)ReturnsReturns are accepted ONLY if the item was not the item described.International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. * Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

THIS IS A ONE OWNER AMP SMOKE FREE & ANIMAL FREE HOUSEIN NORTHERN VIRGINIA. OWNER PASSED AWAY BEGINNING OF COVIDTHIS HAS BEEN IN STORAGE SINCE.(WHEN I BOUGHT IT) IT WAS ACTIVELY USED UNTIL STORED. POWERS UP. I AM NOT AN AUDIOPHILE BUT RECEIVED THIS WITH REST OF STEREOWHEN I WENT TO INQUIRE ABOUT RECORDS. (WILL LIST SHORTLY) On Dec-18-24 at 03:29:38 PST, seller added the following information: lots of questions about pre-amp. yes it is available and will be at auction soon. dont remember model or where it is right now but am actively looing....too much stuff :-)

Accuphase P-800 Power Amplifier AC100V/117V/220V/240V 50Hz/60Hz From Japan DescriptionThis stereo power amplifier follows the development technology of the M-1000 and aims to achieve both high-quality sound and high output. It is configured in a balanced system with two sets of all-stage push-pull drive unit amplifiers connected to a bridge, improving performance. The balanced system requires a transmission system dedicated to positive and negative signals, but external noise is theoretically canceled, and distortion generated by the amplifier is also canceled by the output circuit, allowing for purer signal transmission. The power supply section uses independent left and right power supplies to achieve performance equivalent to that of a mono amplifier.In addition, two power supplies with simply halved power capacity have a higher power impedance than a single transformer system, which is disadvantageous, so the P-800 uses a large-capacity 1.5kVA transformer that can be used for stereo with just one unit, ensuring sufficient margin. In addition, the filter capacitors are equipped with 82,000?Fx4, for a total capacity of 328,000?F. The output stage of each unit amplifier uses wideband transistors with a collector loss (Pc) of 130W in a 7-parallel push-pull configuration, with a total of 28 transistors for each channel (2 units). As a result, the total collector loss reaches 3.6kW. In addition, to prevent switching distortion at low output that occurs in the output stage, the operating point is strictly set so that the PNP and NPN elements are not cut off (state where no current flows at all) by the input signal. In addition, the P-800 is equipped with a low-load impedance switch using a low-impedance drive method that utilizes the basic properties of transistors, and by switching the supply voltage, it is possible to supply large power even at low loads. This allows it to handle 1? and 2? loads, and the full load compatibility makes it possible to fully drive low-impedance, low-efficiency flat-panel speakers and electrostatic speakers. The front stage that drives the final stage uses a MOS FET equivalent to a non-switching Class A drive and is configured in a cascode push-pull configuration. In addition, the front stage that sends a signal to this MOS FET also has a Class A cascode push-pull configuration.This results in a stable output stage with little distortion, from low output in the noise region to high output at the rated output. The input stage uses a class A cascode differential push-pull system.The cascode circuit is used for high frequency amplification, and is stable over a wide frequency band, has good input linearity, and can ensure a wide dynamic range. The large analog power meter allows direct reading of power between -60dB and +3dB using logarithmic compression.It also has a switch to turn off the meter operation and illumination. The input terminals are equipped with both balanced and unbalanced inputs. The side board has a natural persimmon finish. A fan is sold separately, which is ideal for setting the unit in a place with poor heat dissipation or when operating at high output for long periods of time, and can be set inside the side board. Continuous average output(20Hz to 20kHz)Normal Load Imp. Operation (0.01% distortion): 600W/ch (4?)400W/ch (8?)200W/ch (16?)Low Load Imp. Operation (0.05% distortion): 600W/ch (1?)400W/ch (2?)200W/ch (4?)Total harmonic distortion 0.05% (1? to 4? load)0.01% (4? to 16? load)IM distortion 0.003%Frequency response 20Hz to 20kHz ±0dB (at continuous average output, level control MAX)0.5Hz to 150kHz +0 -3.0dB (at 1W output, level control MAX)0.5Hz to 80kHz +0 -3.0dB (at 1W output, level control -6dB)Gain 28.0dBLoad impedance Normal Load Imp. Operation: 4? to 16?Low Load Imp. Operation: 1? to 4?Damping factor 200 (EIA, 50Hz)Input sensitivityNormal Load Imp. Operation: 2.25V (8? load, continuous average output)0.12V (8? load, 1W output)Low Load Imp. Operation: 1.13V (2? load, continuous average output)0.06V (2? load, 1W output)Input impedance Unbalanced input: 20k?Balanced input: 40k?S/N (A-weighted) 125dB (input short, continuous average output)95dB (input 1k?, 1W output)Output meter Logarithmic compression peak display type-60dB to +3dB and output direct reading scaleSemiconductors used Transistors: 158FETs: 20ICs: 15Diodes: 158Power supply: AC100V/117V/220V/240V, 50Hz/60HzPower consumption: 110W+110W (no input)550W+550W (Electrical Appliance and Material Control Law)740W+740W (8? load rated output)External dimensions: Width 481 x Height 239 (including legs) x Depth 489mm (including rear panel legs)Weight: 47.2kg*The voltage at the time of shipment is 100V, so please adjust the internal voltage to match the voltage in your country. ShippingWe will ship the item by FedEx, DHL, UPS, Japan Post (EMS/Airmail) and provide the tracking number. Shipping is only available to the address registered.Please note that any address not registered is not acceptable to ship. Shipping is possible from Monday to Friday.Saturdays, Sundays, and Japanese holidays are not available because the transportation company is closed.International Buyers - Please Note:Import duties and taxes are not included in the item price or shipping cost. Please check with your country’s customs office to determine these additional costs prior to bidding or buying. Additionally, if the delivery address is in a remote area, there may be additional charges by FedEx or DHL. If such charges occur, you may be asked to pay an additional $15 to $20.

ACCUPHASE power amplifier PRO-6 operation confirmed PA Pro Equipment Japan RareDescriptionAbout This ItemsSound output confirmed The power cord is switched off. AppearanceThere is a dent on the top.There are scratches and stains.ConditionexcellentIncluded Itemsonly a main part ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as ?gifts? ? Japan, US and International government regulations prohibit such behavior.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Accuphase P-600DescriptionGradeThe power plug is distorted. AppearanceThere is a feeling of use.Please check the photos for details.FunctionalConfirmed to be energized.Included ItemsShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as ?gifts? ? Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

ACCUPHASE P-300X Stereo Power Amplifier Amp Vintage 1986 AC100V/117V/220V/240V DescriptionType: Stereo power amplifierContinuous average output(20Hz to 20kHz, distortion rate 0.01% or less)When using stereo: 200W+200W (4?)150W+150W (8?)75W+75W (16?)When connected in bridged configuration: 400W (8?)200W (16?)Total harmonic distortion(0.25W to rated output, 20Hz to 20kHz)When using stereo: 0.01% (4?)0.005% (8?)0.005% (16?)When connected in bridged configuration: 0.01% (8?)0.01% (16?)IM distortion rate (new IHF) 0.003%Frequency response 20Hz to 20kHz +0 -0.2dB (rated output, level control maximum)0.4Hz to 500kHz +0 -3.0dB (output 1W, level control maximum)0.4Hz to 150kHz +0 -3.0dB (output 1W, level control -6dB)Gain When using stereo: 27.8dBWhen connected via bridge: 33.8dBLoad impedance When using stereo: 4? to 16?When connected via bridge: 8? to 16?Damping factor (new IHF, 50Hz) When using stereo: 150When connected via bridge: 75Input sensitivity/impedanceWhen using stereo: 1.4V/50k? (rated output)0.11V/50k? (new IHF, 1W output)When connected via bridge: 1.17V/50k? (rated output)0.06V/50k? (new IHF, 1W output)S/N (A-weighted)When using stereo: 120dB (rated output, input shorted)100dB (new IHF, 1W output)When bridged: 110dB (rated output, input shorted)90dB (new IHF, 1W output)Stereo headphones Low output impedance typeSubsonic filter 17Hz, -12dB/octOutput meter Logarithmic compression type, with peak hold switch-40dB to +3dB and direct output reading scaleSemiconductors used Transistors: 42 piecesFETs: 12 piecesICs: 7 piecesDiodes: 61 piecesPower supply voltage AC100V/117V/220V/240V, 50Hz/60HzPower consumption No input: 80W8? load rated output: 550WExternal dimensions Normal: W445 x H160 (including legs) x D373mmWhen wood case is attached: W466 x H190 (including legs) x D385mmWeight 22.5kg Caution (for remote areas)Additional fees may apply for those in remote areas.Shipping Shipping will be by FedEx or EMS.Please contact us if you have any other requests.There are some delays due to the corona.Please understand that it may take some time to arrive. Some countries exclude shipping.Please contact us for more information and we will try to accommodate you. We will ship to the address you have registered with eBay.Please note that we do not respond to requests to change the shipping address after the order is placed.Please do not change your address after shipping.Additional charges will be incurred.Please note that you will be billed if this occurs.If the buyer does not receive the item and returns it to us, the buyer will be responsible for the customs and shipping charges. We ship Monday through Friday.This service is not available on weekends as shipping companies are closed.Please buy with confidence. International Buyers - Please Note:Note: Import duties, taxes and charges are not included in the price of the item or the shipping cost. These charges are the responsibility of the buyer. Please check with your countrys customs office to determine how much these additional costs will be prior to bidding or purchasing.

Accuphase P-600 Maintained Stereo Power Amplifier AC100V/117V/220V/240V 50/60Hz DescriptionType Stereo power amplifierContinuous average output(20Hz to 20kHz,Distortion rate 0.02%)Stereo modeNormal Load Imp. Operation: 700W/ch(2?)500W/ch(4?)300W/ch(8?)150W/ch(16?)Low Load Imp. Operation: 450W/ch(1?)300W/ch(2?)Mono modeNormal Load Imp. Operation: 1400W(4?)1000W(8?)600W(16?)Low Load Imp. Operation: 900W(2?)600W(4?)Total harmonic distortionStereo mode: 0.02%(1? to 2?)0.01%(4? to 16?)Mono mode: 0.02% (2? to 4?)0.01% (8? to 16?)IM distortion (EIA) 0.01%Frequency response 20Hz to 20kHz +0 -0.2dB (at continuous average output, level control MAX)0.5Hz to 250kHz +0 -3dB (at 1W output, level control MAX)0.5Hz to 150kHz +0 -3dB (at 1W output, level control -6dB)Gain 27.8dB (in stereo mode)33.8dB (in mono mode)Load impedance In stereo mode: 1? to 16?In mono mode: 2? to 16?Damping factor(EIA 50Hz) In stereo mode: 300In mono mode: 150Input sensitivityIn stereo mode: 2.0V (8?, 300W, Normal Load Imp. Operation)1.0V (2?, 300W, Low Load Imp. Operation)Monaural: 1.83V (8?, 1000W, Normal Load Imp. Operation)0.91V (2?, 900W, Low Load Imp. Operation)Input impedance 20k? unbalanced600? balancedS/N (A-weighted)Stereo: 125dB (input short, 8?, continuous average output, Normal Load Imp. Operation)100dB (input 1k?, 1W output, EIA)Monaural: 118dB (input short, 8?, continuous average output, Normal Load Imp. Operation)90dB (input 1k?, 1W output, EIA)Subsonic filter 10Hz, -12dB/octOutput meterType: 3-digit digital display, peak indication direct readingDisplay range: 0.001W to 999W by range switchingLoad impedance switching: 2?, 4?, 8?, 16?Hold time: 3 seconds, 30 minutesFrequency response: 20Hz to 20kHz +0 -0.2dBPulse response error: +0 -0.4dB (100Hz 1 wave)Semiconductors used: Transistors: 90FETs: 8ICs: 36Diodes: 104LEDs: 8Power supply voltage: AC100V/117V/220V/240V, 50Hz/60HzPower consumption(Normal Load Imp.Operation) 165W (no input)1100W (Electrical Appliance and Material Control Law)1100W (8? load rated output)External dimensions: Width 480 x Height 232 (including legs) x Depth 476mmWeight: 38.5kgCaution (for remote areas)Additional fees may apply for those in remote areas.Shipping Shipping will be by FedEx or EMS.Please contact us if you have any other requests.There are some delays due to the corona.Please understand that it may take some time to arrive. Some countries exclude shipping.Please contact us for more information and we will try to accommodate you. We will ship to the address you have registered with eBay.Please note that we do not respond to requests to change the shipping address after the order is placed.Please do not change your address after shipping.Additional charges will be incurred.Please note that you will be billed if this occurs.If the buyer does not receive the item and returns it to us, the buyer will be responsible for the customs and shipping charges. We ship Monday through Friday.This service is not available on weekends as shipping companies are closed.Please buy with confidence. International Buyers - Please Note:Note: Import duties, taxes and charges are not included in the price of the item or the shipping cost. These charges are the responsibility of the buyer. Please check with your countrys customs office to determine how much these additional costs will be prior to bidding or purchasing.

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments.

ACCUPHASE C-200VDescriptionThis item is second hand. There are some scratches but no problems with operation. This is completely working.Please check item specifics and photos carefully.Please feel free to contact us if you have any questions.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as gifts - Japan, US and International government regulations prohibit such behavior.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Audio August 1978 Im Heft sind unter anderem folgende Themen/Tests/Gerätebesprechungen zu finden: Tips & Tricks: Luftpolster für Lautsprecher Auflagegewicht nach Gehör Hilfe für verbeulte Kalotten Vorverstärker gegen die Audio Referenz Audiolabor VV2020: Accuphase C-220 Burmester 777 Lautsprecher: Dynaudio P31 AEC Monitor Fischer STE-1200 KEF 105 Pfleid PP 8 Tonabnehmer: Ultimo 20 B Technik: Bildplatte mit Stereoton Superplatte von Philips + Abspielgerät Einfluß verschiedener Kabel auf die Wiedergabetreue von Tonabnehmer Audio-Report: A) Direktschnit-Platten. Warum eigentlich? B) Von einem der auszog, ein Alphorn zu suchen C) Thomas Alva Edison D) Neues aus Chicago C) Discofilme und kein Ende Musik: Ludwig Streicher Griechische Musik Bully Buhlan Mr. Tape Abba Plattenbesprechungen von Rolling Stones: Some Girls bis Knut Kiesewetter: Springe nicht in mein Boot Viele ausführliche CD- bzw. Plattenbesprechungen Anzeigen aus der damaligen Zeit und vieles mehr Falls nicht ausdrücklich erwähnt, sind die Hefte immer ohne CD und sonstige Beilagen. Die Hefte sind auch alle mehr oder weniger gebraucht. Es können evtl. Markierungen bei der Announcen vorhanden sein. Auch ist vereinzelt der Adressaufkleber noch ganz bzw. teilweise vorhanden, es können auch noch Reste am Heft sein. Preisausschrauben wurden in der Regel ausgefüllt bzw. auch ausgeschnitten und sonstige Vorlagen zum Herausschneiden sind in der Regel entfernt. Ab und zu ist auch eine Plattenkritik ausgeschnitten. Abholung möglich oder Versand auf Kosten des Käufers. Versand erfolgt nach Zahlungseingang. Bezahlung muss innerhalb einer Woche erfolgen oder nach Vereinbarung mit mir. Abholung bevorzugt.Erfüllunsort ist 69115 Heidelberg.Nach der allgemeinen Regelung des Bürgerlichen Gesetzbuches (BGB) trägt grundsätzlich der Käufer das Risiko des Verlusts und der Beschädigung der Ware auf dem Transportweg (§ 447 Abs.1 BGB). Der Versand der Ware geschieht also auf Risiko des Käufers. Versicherter Versand optional möglich, dann: 3,50 Euro extra. Dieses Angebot ist privater, nicht gewerblicher Natur. „Verkauf gebrauchter Ware von Privat“. Keine Haftung für Tippfehler. Bei Abholung 2 Monate Funktionsgarantie, sonst: Verkauf abweichend vom geltenden Recht. Mit der Abgabe eines Gebotes verzichten Sie auf die gesetzlichen Garantie- und Gewährleistungsansprüche sowie auf Ihr Rückgaberecht (ausser bei Abholung).

Stereoplay November 2004. Im Heft sind unter anderem folgende Tests/Gerätebesprechungen zu finden: Lautsprecher: Dynaudio Audience 72 SE Audiodata Avance Dali Helicon 300 Usher Compass X 708 Epos M 12.2 Tannoy Eyris DC 1 Harbeth NRG 2 Magnat Quantum 903 Elac BS 204.2 Sonus Faber Concertino Vorstufe und Endstufen: Classe CP 500 + Classe CA 2200 NAD C 162 + NAD CA 272 Vollverstärker: Accuphase E 308 Hard-Disc Recorder: Panasonic DMR E 500 H DVD-Player: Denon DVD 2910 AV-Vorverstärker: Linn Kinos Test und Technik: Netwerk-Player Rang und Namen: neue und frühere Geräte im Klang- und Preisvergleich; Referenzen und Klassenreferenzen Viele ausführliche CD- bzw. Plattenbesprechungen Anzeigen aus der damaligen Zeit und vieles mehr Falls nicht ausdrücklich erwähnt, sind die Hefte immer ohne CD und sonstige Beilagen. Die Hefte sind auch alle mehr oder weniger gebraucht. Es können evtl. Markierungen bei der Announcen vorhanden sein. Auch ist vereinzelt der Adressaufkleber noch ganz bzw. teilweise vorhanden, es können auch noch Reste am Heft sein. Preisausschrauben wurden in der Regel ausgefüllt bzw. auch ausgeschnitten und sonstige Vorlagen zum Herausschneiden sind in der Regel entfernt. Ab und zu ist auch eine Plattenkritik ausgeschnitten. Abholung möglich oder Versand auf Kosten des Käufers. Versand erfolgt nach Zahlungseingang. Bezahlung muss innerhalb einer Woche erfolgen oder nach Vereinbarung mit mir. Abholung bevorzugt, Erfüllunsort ist 69115 Heidelberg. Nach der allgemeinen Regelung des Bürgerlichen Gesetzbuches (BGB) trägt grundsätzlich der Käufer das Risiko des Verlusts und der Beschädigung der Ware auf dem Transportweg (§ 447 Abs.1 BGB). Der Versand der Ware geschieht also auf Risiko des Käufers. Dieses Angebot ist privater, nicht gewerblicher Natur. „Verkauf gebrauchter Ware von Privat“. Keine Haftung für Tippfehler. Bei Abholung 2 Monate Funktionsgarantie, sonst: Verkauf abweichend vom geltenden Recht. Mit der Abgabe eines Gebotes verzichten Sie auf die gesetzlichen Garantie- und Gewährleistungsansprüche sowie auf Ihr Rückgaberecht (ausser bei Abholung).

This is a working Accuphase C-220 phono preamplifier. It was purchased from an audio shop after being serviced a few years ago and has been used until just before listing. The item includes all components shown in the first image. The following functions have been confirmed: ? DISK INPUTS (RCA) DISK1?DISK2 (input switching), ? HEAD AMP, ? MAIN OUTPUT (RCA and balanced), ? No noise in the BALANCE adjustment within the panel, ? No noise in the volume control. Please note that there are no claims or returns accepted for this item. To prevent any issues after the auction, new bidders are not allowed to bid. Additionally, bids may be canceled based on past evaluation status at the sellers discretion. Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Description Its genuine. Payment Please make a payment within 3 days otherwise automatically unpaid case will be opened. Shipping Ships within 5-10 business days (Monday to Friday). It will be shipped from Japan by airmail including tracking number and insurance. It will take 1-3 weeks to deliver, depending on the country and location.International Buyers - Please Note import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

Accuphase C 37 is an uncompromising phono preamplifier that uses the latest technology and components of the highest quality. The massive anti-vibration design case provides stable operation of all circuits and circuits. The top plate of the case is made of anodized aluminum, which ensures uniform distribution and dissipation of heat emanating from the elements, and also effectively dampens chassis vibrations. Brand Accuphase Model c37Voltage 220V I will sell a phono preamplifier, in perfect condition. No complaints or problems. Accuphase C-37 Specifications Playback Frequency 10-20000 HzSignal/Noise Ratio MS Input: 100 dB, MM Input: 110 dBTotal Harmonic Distortion < 0.005%Output Impedance 50 OhmInput Impedance Adjustment of HeadsMS Type: 3, 10, 30, 100, 300, 1000 Ohm.MM Type: 1 kOhm, 47 kOhm, 100 kOhm.Type of heads used MM and MCInputs (programmable) 3 pairs of RCAGain button Yes (+10 dB)Subsonic filter Yes (-12 dB at 10 Hz)Variable phase On the rear panel (balanced analog outputs)Gain MM input 40 dB, MC input 70 dBOperating voltage 230 Volts / 50 HzPower consumption 20 WattsWeight 14.5 kgDimensions (WxHxD) 465 x 114 x 407 mm Box available.I will additionally pack and insure when sending.

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments.

DescriptionAll my products are 100% Authentic.Please feel free to contact us if you have any question.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Accuphase C-280L Control Amplifier AC100V/117V/220V/240V 50Hz/60Hz From JapanDescriptionThis stereo preamplifier has been improved from the C-280 by equipping it with a full-fledged balanced line amplifier with a two-amplifier configuration and 10 input terminals. In order to achieve higher quality balanced transmission, which was previously achieved with a transformer, this preamplifier has a two-amplifier balanced transmission line amplifier with an amplifier on each of the hot and cold sides. The same complementary differential push-pull amplifier circuit is used for each amplifier. The volume is also controlled by a precision four-gang volume (linked to the left and right channels) that is completely separated into hot and cold. In addition to the Class A push-pull amplifiers at all stages, the cascode system is further advanced, and FETs are used on the load side of the cascode-connected amplifiers, eliminating the need to worry about base current leakage when using bipolar transistors, resulting in a playback sound with less coloration. All unit amplifiers use a DC servo system using ICs, which detects direct current generated at the output and feeds it back to the input, preventing DC drift.The DC servo system and precise design have virtually eliminated DC drift, and all signal systems from MC input to output are directly connected. The circuit board is firmly fixed with screws, and the Class A output element and constant-voltage power supply element are fixed in close contact with the housing to dissipate heat, preventing resonance due to induction and vibration. The power supply section uses dedicated power transformers for the left and right channels, resulting in a mono construction that is completely independent both electrically and structurally. In addition, to achieve low impedance over a wide frequency range, a total of six multiple power supplies are used, with a dedicated constant-voltage power supply for each unit amplifier.The unit amplifiers and constant-voltage power supply sections are housed in thick aluminum housings and wired in the shortest possible distance, preventing an increase in power supply impedance in the high range. In order to configure the shortest and straightest signal path, relays are installed in all signal paths where switches are required, and these relays are electronically controlled by a logic circuit to perform switching.The relays used are sealed relays filled with nitrogen gas, which were developed specifically for audio and communication equipment, and the contacts are crossbar twin type made of gold and silver-palladium alloy, which is of high quality with low contact resistance and high durability. Furthermore, to further increase reliability, four circuits are used in parallel for the low-level signal path to ensure completeness. The basic circuit of the equalizer amplifier section is almost identical to that of one side of the line amplifier, but low-noise elements are carefully selected for the input stage of the differential amplification. The elements that create the RIAA playback characteristics that affect the sound quality are composed of a network combining resistors and capacitors, and this section uses a silvered mica capacitor that was developed specifically for audio use. This capacitor has a special processing and structure in which a thin silver film is formed on a piece of refined high-purity mica by the screen method, and then a glass pattern (thin glass layer) is printed on it. This increases the corona discharge starting voltage, allowing the signal to pass stably even at pulse-like high voltages. In addition, the way the lead wires, which affect the sound quality, are drawn out is directly connected to the edge of the silver film, so there is no deterioration. In the head amplifier section, low-noise elements are used in the input circuit, and the impedance of the NFB loop is reduced to reduce resistance noise. In addition, to avoid the influence of noise generated by the DC servo, feedback is not only directly to the negative side of the differential amplifier, but also to the base of the constant current source. This almost completely eliminates the influence of servo-related noise, achieving a signal-to-noise ratio close to the theoretical limit. In order to support various MC cartridges and allow for fine control of sound quality, the MC input impedance can be switched between three levels: 10?, 30?, and 100?. In addition, a gain switch is provided to provide a gain of 32dB in addition to the normal head amplifier gain of 26dB for low-output MC cartridges. Each input jack is specially made and used with high-quality rhodium plating, with an emphasis on long-term deterioration. It is 1?m thick and has a high degree of durability that can withstand 100 million strokes, and has excellent corrosion resistance, so it maintains good contact for a long time. It is equipped with an attenuator that can instantly lower the volume without changing the volume.It uses a three-step rotary system that reduces the level to -? (silence) when turned counterclockwise, and -20dB and -30dB when turned clockwise. It is equipped with independent left and right attenuator-type level controls that perfect channel balance and allow you to control the positioning even if the listening point is shifted. It is equipped with functions such as a monitor switch that allows you to record, play, and monitor a tape recorder, a compensator that increases the volume of the low-frequency range, and a subsonic filter. It uses a heavy persimmon wood case with a gold-tone scratch hairline panel. Frequency responseCD, Tuner, Line, Tape Play: 1.0Hz to 350kHz +0 -3.0dB20Hz to 20kHz +0 -0.2dBCD, Line (Balanced Input): 1.0Hz to 700kHz +0 -3.0dBAD: 20Hz to 20kHz +0 -0.2dBInput sensitivity/impedance(Rated/EIA output 0.5V) AD (Head Amp off): 4.0mV/0.5mV/47k?AD (Head Amp +26dB): 0.2mV/0.025mV/10?, 30?, 100?AD (Head Amp +32dB): 0.1mv/0.0125mV/10?, 30?, 100?CD, Line, Tuner, Tape: 252mV/31.5mV/20k?CD, Line (Balanced): 252mv/31.5mV/40k? (20k?/20k?)Rated output/impedance Output (Balanced): 2.0V/50? (25?/25?), XLR type connectorOutput (Unbalanced): 2.0V/1?, RCA phono jackTape Rec: 126mV/200? (AD), RCA phono jackS/N/Input conversion noiseInput short IHF-A compensationInput terminal Rated input S/N Input conversion noise EIA S/NAD (Head Amp off): 90dB -140dBV 86dBAD (Head Amp +26dB): 78dB -152dBV 76dBAD(Head Amp +32dB): 72dB -152dBV 76dBCD, Line, Tuner, Tape: 115dB -128dBV 95dBCD, Line(Balanced): 115dB -128dBV 95dBMaximum output level(0.005% distortion, 20Hz-20kHz) Output(Balanced):10.0VOutput(Unbalanced):10.0VTape Rec:19.0V(AD)Maximum input voltage(1kHz, 0.005% distortion) AD(Head Amp off):300mVAD(Head Amp +26dB):15mVAD(Head Amp +32dB):7.5mVMinimum load impedance Output (Balanced): 600? (300?/300?)Output (Unbalanced): 1k?Tape Rec: 10k?Gain CD, Line (Balanced) ? Balanced Output: 18dBCD, Tuner, Line, Tape Play ? Output: 18dBCD, Tuner, Line, Tape Play ? Rec Output: 0dBAD (Head Amp Off) ? Output: 54dBAD (Head Amp Off) ? Rec Output: 36dBAD (Head Amp +26dB) ? Output: 80dBAD (Head Amp +26dB) ? Rec Output: 62dBAD (Head Amp +32dB) ? Output: 86dBAD (Head Amp +32dB) ? Rec Outpu: 68dBLoudness Compensator(Volume Adjustment -30dB) 1: +3dB (100Hz)2: +8dB (100Hz), +6dB (20kHz)Subsonic filter 10Hz, -18dB/octAttenuator -20dB, -30dB, -?Semiconductors used Transistors: 219FETs: 58ICs: 26Diodes: 174Power supply AC100V/117V/220V/240V, 50Hz/60HzPower consumption 75WExternal dimensions Width 468 x Height 171 x Depth 396mmWeight 18.1kg*The voltage at the time of shipment is 100V, so please adjust the internal voltage to match the voltage in your country.ShippingWe will ship the item by FedEx, DHL, UPS, Japan Post (EMS/Airmail) and provide the tracking number. Shipping is only available to the address registered.Please note that any address not registered is not acceptable to ship. Shipping is possible from Monday to Friday.Saturdays, Sundays, and Japanese holidays are not available because the transportation company is closed.International Buyers - Please Note:Import duties and taxes are not included in the item price or shipping cost. Please check with your country’s customs office to determine these additional costs prior to bidding or buying. Additionally, if the delivery address is in a remote area, there may be additional charges by FedEx or DHL. If such charges occur, you may be asked to pay an additional $15 to $20.

integrated amplifier Accuphase E-800 / 220v Manufacturer Japan.Accuphase E-800 integrated amplifier in perfect condition. Assembly for Europe 220v. Fully functional. No complaints. No chips or scratches. Fully functional. Complete set. I will send in the original packaging, plus additional packaging, and insurance.

DescriptionAll my products are 100% Authentic.Please feel free to contact us if you have any question. Shipping We ship using FedEx, DHL and Japan Post. PaymentWe usually ship within 5?10 business days of receiving cleared payment. International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

**Manufacturer:** Accuphase (???????) **Model:** C-220 **Accessories:** All items shown in the images are included. **Exterior Rank:** C **Condition:** This is a used item, and there are signs of use such as scratches and dirt. The power has been confirmed to work. Sound output has been confirmed from the left side for both DISC1 and DISC2; however, there is no sound output from the right side. There is constant audio distortion, and no change in sound quality was observed. The exterior has scratches, dirt, and corrosion on the rear terminals. There is a slight burnt smell while in use. Please note that this listing is for the item as is, and adjustments or maintenance will be necessary. All functions have not been fully checked, so please consider this before bidding. The exterior condition is subjectively assessed by our staff; please use it as a reference. Internal cleaning or disassembly has not been performed. Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

integrated amplifier Accuphase E-800 / 220v Manufacturer Japan.Accuphase E-800 integrated amplifier in perfect condition. Assembly for Europe 220v. Fully functional. No complaints. No chips or scratches. Fully functional. Complete set. I will send in the original packaging, plus additional packaging, and insurance.