This Onkyo Integra A-8087 integrated amplifier is a vintage woodgrain model with a sleek black finish. The left channel is out, and there are some scrapes and ware on the exterior, please see photos. The amp is perfect for home audio and has a powerful sound. The Integra A-8087 is a great addition to any audio setup, with its high-quality performance and stylish design. It is ideal for those who want a vintage look without sacrificing sound quality, and are not afraid of tinkering.

In very good physical and functional condition. Comes with original box as shown. Ships to contiguous US states only, no returns. Case will be opened automatically after two days of non-payment. If you have any questions please do not hesitate to ask. Thanks for viewing and have a great day!

This listing is for an Onkyo Integra A-8087Stereo Receiver. The unit operates as it should.No issues. Just trying to clean up. Too much gear. Please look very carefully at the photos for an idea of appearance and condition. Please ask if you have any questions or need more photos.

Onkyo Integra A-8087 Stereo Integrated Amplifier (with Wood Veneer Sides)The A-8087 dates from the 1986-87 model year. It is from their Integra series. Very well built. It is rated at 100 watts/ch into 8 ohms at 0.012% distortion. Damping Factor is 50, making it a very good match for a lot of the 70s speakers. This model was also rated for dynamic power output (what used to be called Music Power) 150 W/ch into 8 ohms, 230 W/ch into 4, and 320 W/ch into 2 ohms. It will drive just about anything. The features of this amp include Real Phase which is supposed to maintain the phase of low frequency signals and improve imaging and sound staging. It has the Delta Power Supply which is supposed to reduce charging current modulation noise in the power supply.This comes with the wood veneer side panels on the case. Power output: 100 watts per channel into 8? (stereo)Frequency response: 2Hz to 50kHzTotal harmonic distortion: 0.015%Damping factor: 50Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line)Signal to noise ratio: 72dB (MC), 80dB (MM), 84dB (line)Output: 150mV (line), 1V (Pre out)Semiconductors: 5 x IC, 42 x transistors, 46 x diodes Dimensions: 18.5” x 15” x 5.75” and weighs 30.9 poundsCONDITION: All working with the exception the combination A&B channel. The A channel and B channels work individually, but the combination A/B selection of the speaker switch is not working. All inputs and channels have been tested and all are working great. Some scuffs and scratches on cabinet. Worst areas are the volume knob face, and the top front corner of case. Please look at pictures for more on condition.Professionally packaged and cushioned, and will be fully insured.Please e-mail us with questions & well try to answer them quickly. Also, please take a look at our other listings.Thanks for viewing our item!!Inventory item R-121823-1218A

Element Hdmi Coax Receiver Ele 8087 And Hdmi Transmitter Set Of 10 Total 5 Each See Pictures For Best Description. EVERYTHING in the pictures is INCLUDED likewise if a power cord or any other accessory is NOT SHOWN it is NOT INCLUDED. Feel free to ask me any questions via Ebay messages

ONKYO Integra A-8087 Integrated Stereo Amplifier, AMP. Clean. Condition is Used. Shipped with USPS Ground Advantage.

Onkyo Integra A-8087 Stereo Integrated Amplifier (with Wood Veneer Sides)The A-8087 dates from the 1986-87 model year. It is from their Integra series. Very well built. It is rated at 100 watts/ch into 8 ohms at 0.012% distortion. Damping Factor is 50, making it a very good match for a lot of the 70s speakers. This model was also rated for dynamic power output (what used to be called Music Power) 150 W/ch into 8 ohms, 230 W/ch into 4, and 320 W/ch into 2 ohms. It will drive just about anything. The features of this amp include Real Phase which is supposed to maintain the phase of low frequency signals and improve imaging and sound staging. It has the Delta Power Supply which is supposed to reduce charging current modulation noise in the power supply.This comes with the wood veneer side panels on the case. Power output: 100 watts per channel into 8? (stereo)Frequency response: 2Hz to 50kHzTotal harmonic distortion: 0.015%Damping factor: 50Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line)Signal to noise ratio: 72dB (MC), 80dB (MM), 84dB (line)Output: 150mV (line), 1V (Pre out)Semiconductors: 5 x IC, 42 x transistors, 46 x diodes Dimensions: 18.5” x 15” x 5.75” and weighs 30.9 poundsCONDITION: Good Used Condition! All inputs and channels have been tested and all are working great. Some scuffs and scratches on cabinet. Worst areas are the volume knob face, and the top front corner of case. Please look at pictures for more on condition.Professionally packaged and cushioned, and will be fully insured.Please e-mail us with questions & well try to answer them quickly. Also, please take a look at our other listings.Thanks for viewing our item!!Inventory item R-112923-1129C

Onkyo Integra A-8087 | Yamaha CD-700 | Rotel RT-820. All three bought in America, still fully functioning and in fantastic condition. Please note that they have the American plug and require a 110V input which is why Im selling with the converter. Top of the range products, perfect for music fanatics! If youre interested in one of the three and wish to buy it separately please send me a message and I can create a separate listing for you! Onkyo Integra A-8087 Specifications Power output: 100 watts per channel into 8 (stereo) Frequency response: 2Hz to 50kHz Total harmonic distortion: 0.015% Damping factor: 50 Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MC), 80dB (MM), 84dB (line) Output: 150mV (line), 1V (Pre out) Semiconductors: 5 x IC, 42 x transistors, 46 x diodes Dimensions: 435 x 144 x 396mm Weight: 12.9kg Yamaha CD-700 Specifications Disc format: CD Digital converter: PCM54HP, 16 bit linear Frequency response: 3Hz to 20kHz Dynamic range: 96dB Signal to Noise Ratio: 98dB Channel separation: 92dB Total harmonic distortion: 0.003% Line output: 2V Dimensions: 435 x 94 x 290mm Weight: 4.8kg Finish: black, silver Year: 1986 Rotel RT-820 Specifications Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue Sensitivity: 2.0uV (FM), 300uV (MW) Signal to Noise Ratio: 65dB (FM), 45dB (MW) Distortion: 0.6% (FM) Selectivity: 60dB (FM), 30dB (MW) Frequency response: 30Hz to 13.5kHz (FM) Dimensions: 430 x 66 x 319mm Weight: 3.1kg

This is a vintage Onkyo Integra A-8087 integrated stereo amplifier, rated 720W of total power. This is a rare, expensive, hard-to-find unit. It is in very nice, fully working condition (tested), except that its missing 2 exterior knobs (the potentiometers still work). Measures 18.5 x 14 x 6.

Up for sale is a gently used onkyo Intergrated Amplifier. 100 watts per channel 8ohms fully functional

Onkyo Integra A-8087 | Yamaha CD-700 | Rotel RT-820. All three bought in America, still fully functioning and in fantastic condition. Please note that they have the American plug and require a 110V input which is why Im selling with the converter. Top of the range products, perfect for music fanatics! If youre interested in one of the three and wish to buy it separately please send me a message and I can create a separate listing for you! Onkyo Integra A-8087 Specifications Power output: 100 watts per channel into 8 (stereo) Frequency response: 2Hz to 50kHz Total harmonic distortion: 0.015% Damping factor: 50 Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MC), 80dB (MM), 84dB (line) Output: 150mV (line), 1V (Pre out) Semiconductors: 5 x IC, 42 x transistors, 46 x diodes Dimensions: 435 x 144 x 396mm Weight: 12.9kg Yamaha CD-700 Specifications Disc format: CD Digital converter: PCM54HP, 16 bit linear Frequency response: 3Hz to 20kHz Dynamic range: 96dB Signal to Noise Ratio: 98dB Channel separation: 92dB Total harmonic distortion: 0.003% Line output: 2V Dimensions: 435 x 94 x 290mm Weight: 4.8kg Finish: black, silver Year: 1986 Rotel RT-820 Specifications Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue Sensitivity: 2.0uV (FM), 300uV (MW) Signal to Noise Ratio: 65dB (FM), 45dB (MW) Distortion: 0.6% (FM) Selectivity: 60dB (FM), 30dB (MW) Frequency response: 30Hz to 13.5kHz (FM) Dimensions: 430 x 66 x 319mm Weight: 3.1kg

Onkyo Integra A-8087 | Yamaha CD-700 | Rotel RT-820. All three bought in America, still fully functioning and in fantastic condition. Please note that they have the American plug and require a 110V input which is why Im selling with the converter. Top of the range products, perfect for music fanatics! If youre interested in one of the three and wish to buy it separately please send me a message and I can create a separate listing for you! Onkyo Integra A-8087 Specifications Power output: 100 watts per channel into 8 (stereo) Frequency response: 2Hz to 50kHz Total harmonic distortion: 0.015% Damping factor: 50 Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MC), 80dB (MM), 84dB (line) Output: 150mV (line), 1V (Pre out) Semiconductors: 5 x IC, 42 x transistors, 46 x diodes Dimensions: 435 x 144 x 396mm Weight: 12.9kg Yamaha CD-700 Specifications Disc format: CD Digital converter: PCM54HP, 16 bit linear Frequency response: 3Hz to 20kHz Dynamic range: 96dB Signal to Noise Ratio: 98dB Channel separation: 92dB Total harmonic distortion: 0.003% Line output: 2V Dimensions: 435 x 94 x 290mm Weight: 4.8kg Finish: black, silver Year: 1986 Rotel RT-820 Specifications Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue Sensitivity: 2.0uV (FM), 300uV (MW) Signal to Noise Ratio: 65dB (FM), 45dB (MW) Distortion: 0.6% (FM) Selectivity: 60dB (FM), 30dB (MW) Frequency response: 30Hz to 13.5kHz (FM) Dimensions: 430 x 66 x 319mm Weight: 3.1kg

Onkyo Integra A-8087 | Yamaha CD-700 | Rotel RT-820. All three bought in America, still fully functioning and in fantastic condition. Please note that they have the American plug and require a 110V input which is why Im selling with the converter. Top of the range products, perfect for music fanatics! If youre interested in one of the three and wish to buy it separately please send me a message and I can create a separate listing for you! Onkyo Integra A-8087 Specifications Power output: 100 watts per channel into 8 (stereo) Frequency response: 2Hz to 50kHz Total harmonic distortion: 0.015% Damping factor: 50 Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MC), 80dB (MM), 84dB (line) Output: 150mV (line), 1V (Pre out) Semiconductors: 5 x IC, 42 x transistors, 46 x diodes Dimensions: 435 x 144 x 396mm Weight: 12.9kg Yamaha CD-700 Specifications Disc format: CD Digital converter: PCM54HP, 16 bit linear Frequency response: 3Hz to 20kHz Dynamic range: 96dB Signal to Noise Ratio: 98dB Channel separation: 92dB Total harmonic distortion: 0.003% Line output: 2V Dimensions: 435 x 94 x 290mm Weight: 4.8kg Finish: black, silver Year: 1986 Rotel RT-820 Specifications Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue Sensitivity: 2.0uV (FM), 300uV (MW) Signal to Noise Ratio: 65dB (FM), 45dB (MW) Distortion: 0.6% (FM) Selectivity: 60dB (FM), 30dB (MW) Frequency response: 30Hz to 13.5kHz (FM) Dimensions: 430 x 66 x 319mm Weight: 3.1kg

Your announcement bar will show in here. Welcome to the ANNABOG Store Our Store All Items Feebdacks Bookmark Us Contact Us Internal Mini SAS to 4x SATA Cable 1.6 FT SFF-8087 to SATA Cord RAID Controller Price Free Next Day Delivery Free next day delivery on orders over $50 30 Days Return Policy See our return policy Online & Phone Support Have a query? Just contact our support team PRODUCT DESCRIPTION 1.6 Feet Internal Mini SAS to SATA Cable Mini SAS to SATA adapter provides reliable internal connectivity between a SCSI controller card in a computer system and directly connected four storage devices with a SATA connector. It is typically used to connect internal Mini-SAS drives, servers, and switches. Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backward compatible with SATA. This allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements. This 1/2 meter-long cable uses 30 AWG wires and is intended for internal use. It has a single 36-pin SFF-8087 male Mini-SAS plug (with a locking latch) on one end and four 7-pin SATA female plugs (with locking latches) on the other, allowing you to connect four SATA drives to a SAS controller. This is a forward breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and drives on the SATA end. PLEASE NOTE Pair with a 4 port SATA to power splitter cable to provide power to the drives. Do not connect Mini SAS SFF-8087 to your backplane, otherwise, the SAS to SATA cable will not work with them. Data transfer speed is determined by the capabilities of your SAS controller and SATA drives. Specifications: Interface: SAS-2 Host Connector: 1 x 36-Pin Mini-SAS (SFF-8087) Male Target Connectors: 4 x 7-Pin SATA Male with Latched Data Transfer Speed: 6 Gb/s Cable Length: 1.6 ft(0.5 m) Wire Gauge: 30 AWG Specifications BRAND Cmple MODEL Custom Block Heading Custom Block Content. PAYMENT We accept all major credit cards VISA, MasterCard, American Express, Discover, or PayPal. SHIPPING We only ship to Confirmed PayPal Addresses. Free Shipping within the continental United States. By the Pennsylvania state law, we are required to collect sales tax when shipping within the state of PA. RETURNS You are not 100% satisfied with an item you received? Whatever the reason is, you wont be stuck with an item you cannot use or you do not want. You may return your purchase for ANY REASON within 30 days of receipt for an exchange or a refund of the purchase price excluding our shipping. Our products are offered with free shipping, so please be aware that if you return the products our actual outbound shipping costs will still be deducted from your return refund. If a product arrives damaged, or we made a shipping error, we will pay to return the item to us and send a replacement to you. If you decide you do not want a replacement, the item can be returned under our standard return policy Stay Updated! Add my shop to your favourites & receive my email newsletter about new Items and special promotions! SUBSCRIBE Our Store All Items Feebdacks Bookmark Us Contact Us

Your announcement bar will show in here. Welcome to the ANNABOG Store Our Store All Items Feebdacks Bookmark Us Contact Us Internal Mini SAS to 4x SATA Cable 3.3 FT SFF-8087 to SATA Cord RAID Controller Price Free Next Day Delivery Free next day delivery on orders over $50 30 Days Return Policy See our return policy Online & Phone Support Have a query? Just contact our support team PRODUCT DESCRIPTION 3.3 Feet Internal Mini SAS to SATA Cable Mini SAS to SATA adapter provides reliable internal connectivity between a SCSI controller card in a computer system and directly connected four storage devices with a SATA connector. It is typically used to connect internal Mini-SAS drives, servers, and switches. Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backward compatible with SATA. This allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements. This 1-meter-long cable uses 30 AWG wires and is intended for internal use. It has a single 36-pin SFF-8087 male Mini-SAS plug (with a locking latch) on one end and four 7-pin SATA female plugs (with locking latches) on the other, allowing you to connect four SATA drives to a SAS controller. This is a forward breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and drives on the SATA end. PLEASE NOTE Pair with a 4 port SATA to power splitter cable to provide power to the drives. Do not connect Mini SAS SFF-8087 to your backplane, otherwise, the SAS to SATA cable will not work with them. Data transfer speed is determined by the capabilities of your SAS controller and SATA drives. Specifications: Interface: SAS-2 Host Connector: 1 x 36-Pin Mini-SAS (SFF-8087) Male Target Connectors: 4 x 7-Pin SATA Male with Latched Data Transfer Speed: 6 Gb/s Cable Length: 3.3 ft(0.5 m) Wire Gauge: 30 AWG Specifications BRAND Cmple MODEL Custom Block Heading Custom Block Content. PAYMENT We accept all major credit cards VISA, MasterCard, American Express, Discover, or PayPal. SHIPPING We only ship to Confirmed PayPal Addresses. Free Shipping within the continental United States. By the Pennsylvania state law, we are required to collect sales tax when shipping within the state of PA. RETURNS You are not 100% satisfied with an item you received? Whatever the reason is, you wont be stuck with an item you cannot use or you do not want. You may return your purchase for ANY REASON within 30 days of receipt for an exchange or a refund of the purchase price excluding our shipping. Our products are offered with free shipping, so please be aware that if you return the products our actual outbound shipping costs will still be deducted from your return refund. If a product arrives damaged, or we made a shipping error, we will pay to return the item to us and send a replacement to you. If you decide you do not want a replacement, the item can be returned under our standard return policy Stay Updated! Add my shop to your favourites & receive my email newsletter about new Items and special promotions! SUBSCRIBE Our Store All Items Feebdacks Bookmark Us Contact Us

Spediamo dal nostro magazzino in Italia / We ship Worldwide]-->Store LinksSEGUICICONTATTACIFEEDBACKCHI SIAMOSEGUICICONTATTACIFEEDBACKCHI SIAMO6355-8087-21 encitech DTSL09-SJSRG-T-DMP-W-K KIT connettori maschio SUB-D 180 ? Numero Poli (num): 9 Punte a saldare 1 Brand new item, with 2 years warranty (unless otherwise specified in title or description). Prodotto Nuovo di fabbrica, nella sua confezione originale di vendita (o bulk se specificato altrove), mai aperto, mai usato.Spedizione Corriere Espresso, con assicurazione inclusa SEMPRE! Codice Prodotto eeemarket: R-BD1925190 DESCRIZIONE / DESCRIPTION 6355-8087-21 encitech DTSL09-SJSRG-T-DMP-W-K KIT connettori maschio SUB-D 180 ? Numero Poli (num): 9 Punte a saldare 1 KIT connettori maschio SUB-D; Numero di righe: 2; Numero Poli (num): 9Angolo di connessione: 180 ? ? Caratteristiche del connettore: con custodia metallica, incl. viti a testa corta 4-40, incl. passacavo, Uscita cavo diritta ? Collegamento (Componenti): Punte a saldare ? Colore: Nickel ? Intervallo di temperatura (dettagli): Da -40 ?C a 105 ?C ? Materiale (dettagli): Zinco pressofuso ? Materiale di contatto: Lega di rame ? Numero Poli (num): 9 ? Numero cicli di accoppiamento: 500 ? Numero di righe: 2 ? Struttura connettore: Connettore maschio, diritto ? Superficie di contatto: Placcato oro ? Tipo contatti SUB-D: contatti torniti Please note: home appliances (shavers, kitchen machines, coffee machines, ecc.) on sale at our store are intended for use at 220-240 Volts and in some cases at 100-240 Volts as well. If you live in a region with 100-110 Volts outlets, please contact us before buying. For more information about voltage by country, click here.SPEDIZIONE / SHIPPINGPAGAMENTI / PAYMENTSRESI / RETURNSPERCHE NOI / WHY EEEMARKETImballiamo (con cura) e spediamo ogni giorno in tutto il mondo. Le spedizioni partono dall Italia e sono sempre assicurate contro danni e smarrimenti. Spediamo lo stesso giorno del pagamento o entro 4 giorni lavorativi dalla ricezione del pagamento. Vuoi sapere quando ti sara consegnato lordine? Controlla i tempi stimati da ebay nella sezione Spedizione e Pagamenti. Shipping leave from Italy: import duties, taxes, customs charges are not included in the item price nor the shipping cost (within the EU there are no customs fees). These charges are at buyers responsibility. For special EU member states territories (Canarias, Madeira, Azores, Ceuta Y Melilla, etc.) and other remote areas or for high-volume/high-weight items, an extra fee for freight charges may be requested. Accettiamo e preferiamo Paypal (senza alcun supplemento). Accettiamo anche bonifico bancario su conto Unicredit o Deutsche Bank. Paypal accepted and preferred. We accept bank transfer too: in USD to an American bank account, in GBP to a UK bank account and in Euro to an Italian bank account. Dormi sonni tranquilli: se i prodotti si rivelano difettosi, se non sono compatibili, se non corrispondono alla descrizione o se semplicemente non ti piacciono, contattaci entro 60 giorni dalla ricezione. Ti aiuteremo a restituirceli per un cambio o un rimborso. Sleep peacefully: if the goods are faulty, not fit for purpose, dont match description or you just dont like them, please contact us by 60 days from delivery receiving. Well be very glad to assist you on how to return the goods and get a replacement or a refund.Descrizioni precise dei prodottiProdotti 100% originali, nuovi di zecca - eeemarket non vende prodotti usati o contraffatti - MAI!60 giorni per ripensarciLasciamo il feedback positivo per primiPagamento sicuro tramite PaypalAssistenza Clienti di comprovata esperienza ed eccellente livelloPrezzi competitivi Siamo appassionati di Hi-Tech. Partner di eBay dal 2011...e siamo ancora pazzi di questo lavoro. Ci auguriamo tu possa apprezzare la nostra seriet? ed affidabilit?. Potrai sempre contare su di noi. Per qualunque esigenza, noi siamo qui, puoi contarci! We are the Hi-Tech Lovers. Weve been online as eBay-partners since 2011...and were keeping on loving this job! Hope you will appreciate our seriousness and reliability. You can always count on us! For any information, were here!eeemarket Copyright © 2018. All rights reserved.

Onkyo Integra A-8087 | Yamaha CD-700 | Rotel RT-820. All three bought in America, still fully functioning and in fantastic condition. Please note that they have the American plug and require a 110V input which is why Im selling with the converter. Top of the range products, perfect for music fanatics! If youre interested in one of the three and wish to buy it separately please send me a message and I can create a separate listing for you! Onkyo Integra A-8087 Specifications Power output: 100 watts per channel into 8 (stereo) Frequency response: 2Hz to 50kHz Total harmonic distortion: 0.015% Damping factor: 50 Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MC), 80dB (MM), 84dB (line) Output: 150mV (line), 1V (Pre out) Semiconductors: 5 x IC, 42 x transistors, 46 x diodes Dimensions: 435 x 144 x 396mm Weight: 12.9kg Yamaha CD-700 Specifications Disc format: CD Digital converter: PCM54HP, 16 bit linear Frequency response: 3Hz to 20kHz Dynamic range: 96dB Signal to Noise Ratio: 98dB Channel separation: 92dB Total harmonic distortion: 0.003% Line output: 2V Dimensions: 435 x 94 x 290mm Weight: 4.8kg Finish: black, silver Year: 1986 Rotel RT-820 Specifications Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue Sensitivity: 2.0uV (FM), 300uV (MW) Signal to Noise Ratio: 65dB (FM), 45dB (MW) Distortion: 0.6% (FM) Selectivity: 60dB (FM), 30dB (MW) Frequency response: 30Hz to 13.5kHz (FM) Dimensions: 430 x 66 x 319mm Weight: 3.1kg

Onkyo Integra A-8087 | Yamaha CD-700 | Rotel RT-820. All three bought in America, still fully functioning and in fantastic condition. Please note that they have the American plug and require a 110V input which is why Im selling with the converter. Top of the range products, perfect for music fanatics! If youre interested in one of the three and wish to buy it separately please send me a message and I can create a separate listing for you! Onkyo Integra A-8087 Specifications Power output: 100 watts per channel into 8 (stereo) Frequency response: 2Hz to 50kHz Total harmonic distortion: 0.015% Damping factor: 50 Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MC), 80dB (MM), 84dB (line) Output: 150mV (line), 1V (Pre out) Semiconductors: 5 x IC, 42 x transistors, 46 x diodes Dimensions: 435 x 144 x 396mm Weight: 12.9kg Yamaha CD-700 Specifications Disc format: CD Digital converter: PCM54HP, 16 bit linear Frequency response: 3Hz to 20kHz Dynamic range: 96dB Signal to Noise Ratio: 98dB Channel separation: 92dB Total harmonic distortion: 0.003% Line output: 2V Dimensions: 435 x 94 x 290mm Weight: 4.8kg Finish: black, silver Year: 1986 Rotel RT-820 Specifications Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue Sensitivity: 2.0uV (FM), 300uV (MW) Signal to Noise Ratio: 65dB (FM), 45dB (MW) Distortion: 0.6% (FM) Selectivity: 60dB (FM), 30dB (MW) Frequency response: 30Hz to 13.5kHz (FM) Dimensions: 430 x 66 x 319mm Weight: 3.1kg