Amazon |
cat leb 400 (74) |
cat leb 401 (162) |
cat leb 404 (192) |
cat leb (428) |
8200 cd audiolab (745) |
Audiolab 8000C Preamp + 8000P Power Amp
End: 02.05. 2024 13:40:25 on Thursday
- Condition: Used
- Price: 510.8 EUR
- Status: sold
- Item number: 285747444409
- Seller: brechbt (205|100.0%)
- Seller information: non commercial
- Item location: Asheville, North Carolina
- Ships to: US
- Shipping: EUR
- on EBAY
-
Description
Attention Audiophiles and Analog Lovers!! Here are two items you rarely see here in the USA, the Audiolab 8000P power amp and 8000C Preamp. Audiolab is a very well-respected British audio products company. I bought these years ago during my audiophile period. I wanted separates, but I wanted a preamp that had tone controls. That was difficult to find at the time. These two pieces were my main system for a long time. I could try to describe the sound of these two components, but what would be the point? I loved them, and I think others would too. For those of you who are returning to vinyl, or never left, please note that this preamp has connections for both moving coil and moving magnet cartridges. Both of these phono pre-amp stages are excellent, with commendably low noise. Attached are photos showing specifications from the manual, which of course is included. Theyve been in storage in recent years, in their boxes in climate contolled spaces. I took them out and plugged them in today to make sure everything is ok, and it is. There was no static or noise in the lines, even with the volume up all the way. The switches all work smoothly, with no crackles or pops which would indicate oxidation. Cosmetically they are excellent, having been owned by someone who is very particular about his gear. I am going to list these as a set, because I think they are well matched and will provide highest value if together. Im pricing them below what I think is market value, so will not be open to counteroffers. That could change if they dont sell. They will ship inside their factory boxes, and those boxes will be overpacked in a single box.
Camtech/ AUDIOLAB 8000P Stereo Power Amplifier and 8000C Pre amplifier. High End
End: 12.04. 2024 17:55:48 on Friday
AUDIOLAB 8000C PRE-AMP & ROTEL 8000P POWER AMP GOOD WORKING ORDER.
End: 09.04. 2024 19:01:06 on Tuesday
- Condition: Used
- Price: 523.0 EUR
- Status: sold
- Item number: 204711262752
- Seller: rogerdelodger (8107|99.6%)
- Seller information: Commercial
- Item location: Norwich
- Ships to: GB
- Shipping: 56,6 EUR
- on EBAY
-
Description
AUDIOLAB 8000C/8000P AMPLIFIERGood condition some marks on the outer cases. Its in full working order has been checked and sounds very good does have phono stage formm/mc cartridges. All items are security marked. Contact me for a quote regarding worldwide shipping costs. UK postage shown is for mainland only. For items collected in person,Cash only. Any questions, please ask. Thanks for looking Returns and warranties Return Policy We hope that you will be pleased with your purchases from Vintage Audio Classics However, there may be occasions when you will need to return items to us. Items Damaged in Transit If any items were damaged in transit, we ask that you report it to us within 3 working days. If the items are visibly damaged on receipt, its best to sign the carriers delivery note accordingly. We will arrange collection (UK mainland only, not all UK mainland post codes sorry, cannot collect from out of area post codes, I’m sure you know If your post code is classed as out of area, the item will need to be returned at buyers cost). Items should be returned in their original packaging complete with all accessories and documentation. Once received back, well issue a full refund to you via your original payment method. Items Faulty on Arrival and Items Faulty in 30-day Warranty Period (this does not include any faults listed in the description or items sold as faulty for spares or repair, these are not returnable) If your items are faulty on arrival, please inform us as soon as possible and let us know what the fault is. We will arrange collection (UK mainland only, not all UK mainland post codes sorry, we cannot collect from out of area post codes, I’m sure you know If your post code is classed as out of area, the item will need to be return at buyers cost). We test returned items, and if a returned item is found not to be faulty we will deduct return postage costs from the refund. We security mark all items and keep a record of serial numbers so if a different item is returned as faulty we will report it to Ebay and involve the local police as this is classed as fraud and can carry a custodial sentence.
Camtech/ AUDIOLAB 8000P Stereo Power Amplifier and 8000C Pre amplifier. High End
End: 01.04. 2024 14:45:28 on Monday
Audiolab 8000RC Remote For 8000Q Preamp 8000CDM CD Transport Audiophile
End: 19.03. 2024 02:47:48 on Tuesday
- Condition: Used
- Price: 52.65 EUR
- Status: sold
- Item number: 196292416418
- Seller: retrorescue78 (1407|99.8%)
- Seller information: Commercial (with base shop)
- Item location: Delta, British Columbia
- Ships to: CA
- Shipping: 7,42 EUR
- on EBAY
-
Description
See pictures for details and condition Canada and US pay $10 shipping
Vintage Audiolab 8000CDM CD Transport Made In England With 115V For Audiophile
End: 15.03. 2024 20:26:38 on Friday
- Condition: Used
- Price: 367.38 EUR
- Status: sold
- Item number: 276372081690
- Bids: 2
- Seller: rogerli (1474|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 50,0 EUR
- on EBAY
-
Description
This weighted 6kg, thanks in part to a high-quality toroidal transformer that was unexpectedly huge. To isolate the mech from the outside environment, a visco-elastic polymer suspension system was used, as well as a low-noise master clock. The unit came with optical, coaxial (S/PDIF 75 ohm) and AES/EBU (110 ohm balanced) digital outputs, with a BNC to BNC coaxial interconnect supplied, along with BNC to phono and phono to BNC adapters supplied. The 8000CDM was built and finished to the company’s typical high standards, making it one of the best British CD transports. The specifications are:
Vintage Audiolab 8000CDM CD Transport Made In England With 115V For Audiophile
End: 08.03. 2024 20:25:21 on Friday
- Condition: Used
- Price: 387.77 EUR
- Status: unsold
- Item number: 276360828374
- Bids: 0
- Seller: rogerli (1474|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 50,0 EUR
- on EBAY
-
Description
This weighted 6kg, thanks in part to a high-quality toroidal transformer that was unexpectedly huge. To isolate the mech from the outside environment, a visco-elastic polymer suspension system was used, as well as a low-noise master clock. The unit came with optical, coaxial (S/PDIF 75 ohm) and AES/EBU (110 ohm balanced) digital outputs, with a BNC to BNC coaxial interconnect supplied, along with BNC to phono and phono to BNC adapters supplied. The 8000CDM was built and finished to the company’s typical high standards, making it one of the best British CD transports. The specifications are:
Vintage Audiolab 8000CDM CD Transport Made In England With 115V For Audiophile
End: 01.03. 2024 20:21:51 on Friday
- Condition: Used
- Price: 415.3 EUR
- Status: unsold
- Item number: 276350215833
- Bids: 0
- Seller: rogerli (1472|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 50,0 EUR
- on EBAY
-
Description
The 8000CDM featured a Philips CDM9 Pro mechanism housed in a conventional Audiolab 450x320x75mm chassis. The CDM9 was the final model in Philips’ classic line of single-beam swing arm mechs, which many considered to have better sound than the three-beam linear tracking devices that followed. This weighted 6kg, thanks in part to a high-quality toroidal transformer that was unexpectedly huge. To isolate the mech from the outside environment, a visco-elastic polymer suspension system was used, as well as a low-noise master clock. The unit came with optical, coaxial (S/PDIF 75 ohm) and AES/EBU (110 ohm balanced) digital outputs, with a BNC to BNC coaxial interconnect supplied, along with BNC to phono and phono to BNC adapters supplied. The 8000CDM was built and finished to the company’s typical high standards, making it one of the best British CD transports. The specifications are:
Vintage Audiolab 8000CDM CD Transport Made In England With 115V For Audiophile
End: 23.02. 2024 19:51:28 on Friday
- Condition: Used
- Price: 450.0 USD
- Status: 6T 19:16:42
- Item number: 276339267712
- Bids: 0
- Seller: (|%)
- Seller information:
- Item location: Union City,CA,USA
- Ships to:
- Shipping: 50,0 USD
- on EBAY
Vintage Audiolab 8000RC Remote For 8000Q Preamp 8000CDM CD Transport Audiophile
End: 16.02. 2024 23:09:49 on Friday
- Condition: Used
- Price: 55.7 EUR
- Status: sold
- Item number: 276327618080
- Bids: 2
- Seller: rogerli (1466|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 10,0 EUR
- on EBAY
-
Description
This vintage Audiolab 8000RC remote is the perfect accessory for your 8000Q preamp and 8000CDM CD transport. It allows you to easily control your audio equipment from up to 10 meters away. The black remote is compatible with Audiolab products, specifically the 8000Q and 8000CDM models. The wireless remote has a range of 5-10m and is a unit type item. It features wireless connectivity and is a great addition to any audiophiles collection. The dimensions of the remote are 7 in length, 3 in width, and 1 in height. This remote control is a must-have for those who value convenience and ease of use. The Specs are:
Vintage Audiolab 8000CDM CD Transport Made In England With 115V For Audiophile
End: 16.02. 2024 19:49:15 on Friday
- Condition: Used
- Price: 417.77 EUR
- Status: unsold
- Item number: 276327394150
- Bids: 0
- Seller: rogerli (1466|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 50,0 EUR
- on EBAY
-
Description
The 8000CDM featured a Philips CDM9 Pro mechanism housed in a conventional Audiolab 450x320x75mm chassis. The CDM9 was the final model in Philips’ classic line of single-beam swing arm mechs, which many considered to have better sound than the three-beam linear tracking devices that followed. This weighted 6kg, thanks in part to a high-quality toroidal transformer that was unexpectedly huge. To isolate the mech from the outside environment, a visco-elastic polymer suspension system was used, as well as a low-noise master clock. The unit came with optical, coaxial (S/PDIF 75 ohm) and AES/EBU (110 ohm balanced) digital outputs, with a BNC to BNC coaxial interconnect supplied, along with BNC to phono and phono to BNC adapters supplied. The 8000CDM was built and finished to the company’s typical high standards, making it one of the best British CD transports. The specifications are:
Vintage Audiolab 8000RC Remote For 8000Q Preamp 8000CDM CD Transport Audiophile
End: 09.02. 2024 21:47:56 on Friday
- Condition: Used
- Price: 70.0 USD
- Status: 6T 21:0:47
- Item number: 276316101284
- Bids: 0
- Seller: (|%)
- Seller information:
- Item location: Union City,CA,USA
- Ships to:
- Shipping: 10,0 USD
- on EBAY
Vintage Audiolab 8000CDM CD Transport Made In England With 115V For Audiophile
End: 09.02. 2024 19:16:12 on Friday
- Condition: Used
- Price: 463.54 EUR
- Status: unsold
- Item number: 276315941708
- Bids: 0
- Seller: rogerli (1465|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 50,0 EUR
- on EBAY
-
Description
The 8000CDM featured a Philips CDM9 Pro mechanism housed in a conventional Audiolab 450x320x75mm chassis. The CDM9 was the final model in Philips’ classic line of single-beam swing arm mechs, which many considered to have better sound than the three-beam linear tracking devices that followed. This weighted 6kg, thanks in part to a high-quality toroidal transformer that was unexpectedly huge. To isolate the mech from the outside environment, a visco-elastic polymer suspension system was used, as well as a low-noise master clock. The unit came with optical, coaxial (S/PDIF 75 ohm) and AES/EBU (110 ohm balanced) digital outputs, with a BNC to BNC coaxial interconnect supplied, along with BNC to phono and phono to BNC adapters supplied. The 8000CDM was built and finished to the company’s typical high standards, making it one of the best British CD transports. The specifications are:
Vintage Audiolab 8000RC Remote For 8000Q Preamp 8000CDM CD Transport Audiophile
End: 02.02. 2024 21:11:01 on Friday
- Condition: Used
- Price: 74.06 EUR
- Status: unsold
- Item number: 276304825859
- Bids: 0
- Seller: rogerli (1462|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 10,0 EUR
- on EBAY
-
Description
This vintage Audiolab 8000RC remote is the perfect accessory for your 8000Q preamp and 8000CDM CD transport. It allows you to easily control your audio equipment from up to 10 meters away. The black remote is compatible with Audiolab products, specifically the 8000Q and 8000CDM models. The wireless remote has a range of 5-10m and is a unit type item. It features wireless connectivity and is a great addition to any audiophiles collection. The dimensions of the remote are 7 in length, 3 in width, and 1 in height. This remote control is a must-have for those who value convenience and ease of use. The Specs are:
Vintage Audiolab 8000CDM CD Transport Made In England With 115V For Audiophile
End: 02.02. 2024 17:14:56 on Friday
- Condition: Used
- Price: 462.88 EUR
- Status: unsold
- Item number: 276304494759
- Bids: 0
- Seller: rogerli (1462|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 50,0 EUR
- on EBAY
-
Description
The 8000CDM featured a Philips CDM9 Pro mechanism housed in a conventional Audiolab 450x320x75mm chassis. The CDM9 was the final model in Philips’ classic line of single-beam swing arm mechs, which many considered to have better sound than the three-beam linear tracking devices that followed. This weighted 6kg, thanks in part to a high-quality toroidal transformer that was unexpectedly huge. To isolate the mech from the outside environment, a visco-elastic polymer suspension system was used, as well as a low-noise master clock. The unit came with optical, coaxial (S/PDIF 75 ohm) and AES/EBU (110 ohm balanced) digital outputs, with a BNC to BNC coaxial interconnect supplied, along with BNC to phono and phono to BNC adapters supplied. The 8000CDM was built and finished to the company’s typical high standards, making it one of the best British CD transports. The specifications are:
Vintage Audiolab 8000RC Remote For 8000Q Preamp 8000CDM CD Transport Audiophile
End: 26.01. 2024 21:04:27 on Friday
- Condition: Used
- Price: 83.05 EUR
- Status: unsold
- Item number: 276293398433
- Bids: 0
- Seller: rogerli (1462|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 10,0 EUR
- on EBAY
-
Description
This vintage Audiolab 8000RC remote is the perfect accessory for your 8000Q preamp and 8000CDM CD transport. It allows you to easily control your audio equipment from up to 10 meters away. The black remote is compatible with Audiolab products, specifically the 8000Q and 8000CDM models. The wireless remote has a range of 5-10m and is a unit type item. It features wireless connectivity and is a great addition to any audiophiles collection. The dimensions of the remote are 7 in length, 3 in width, and 1 in height. This remote control is a must-have for those who value convenience and ease of use. The Specs are:
Vintage Audiolab 8000CDM CD Transport Made In England With 115V For Audiophile
End: 26.01. 2024 04:49:28 on Friday
- Condition: Used
- Price: 461.4 EUR
- Status: unsold
- Item number: 276292287789
- Bids: 0
- Seller: rogerli (1462|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 50,0 EUR
- on EBAY
-
Description
The 8000CDM featured a Philips CDM9 Pro mechanism housed in a conventional Audiolab 450x320x75mm chassis. The CDM9 was the final model in Philips’ classic line of single-beam swing arm mechs, which many considered to have better sound than the three-beam linear tracking devices that followed. This weighted 6kg, thanks in part to a high-quality toroidal transformer that was unexpectedly huge. To isolate the mech from the outside environment, a visco-elastic polymer suspension system was used, as well as a low-noise master clock. The unit came with optical, coaxial (S/PDIF 75 ohm) and AES/EBU (110 ohm balanced) digital outputs, with a BNC to BNC coaxial interconnect supplied, along with BNC to phono and phono to BNC adapters supplied. The 8000CDM was built and finished to the company’s typical high standards, making it one of the best British CD transports. The specifications are:
Audiolab 8000CDM CD Player/Transport
End: 21.01. 2024 18:20:43 on Sunday
Vintage Audiolab 8000RC Remote For 8000Q Preamp 8000CDM CD Transport Audiophile
End: 19.01. 2024 20:48:26 on Friday
- Condition: Used
- Price: 92.06 EUR
- Status: unsold
- Item number: 276280888221
- Bids: 0
- Seller: rogerli (1461|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 10,0 EUR
- on EBAY
-
Description
This vintage Audiolab 8000RC remote is the perfect accessory for your 8000Q preamp and 8000CDM CD transport. It allows you to easily control your audio equipment from up to 10 meters away. The black remote is compatible with Audiolab products, specifically the 8000Q and 8000CDM models. The wireless remote has a range of 5-10m and is a unit type item. It features wireless connectivity and is a great addition to any audiophiles collection. The dimensions of the remote are 7 in length, 3 in width, and 1 in height. This remote control is a must-have for those who value convenience and ease of use. The Specs are:
Vintage Audiolab 8000CDM CD Transport Made In England With 115V For Audiophile
End: 19.01. 2024 04:44:19 on Friday
- Condition: Used
- Price: 460.3 EUR
- Status: unsold
- Item number: 276279496710
- Bids: 0
- Seller: rogerli (1461|100.0%)
- Seller information: Commercial (with base shop)
- Item location: Union City, California
- Ships to: US
- Shipping: 50,0 EUR
- on EBAY
-
Description
The 8000CDM featured a Philips CDM9 Pro mechanism housed in a conventional Audiolab 450x320x75mm chassis. The CDM9 was the final model in Philips’ classic line of single-beam swing arm mechs, which many considered to have better sound than the three-beam linear tracking devices that followed. This weighted 6kg, thanks in part to a high-quality toroidal transformer that was unexpectedly huge. To isolate the mech from the outside environment, a visco-elastic polymer suspension system was used, as well as a low-noise master clock. The unit came with optical, coaxial (S/PDIF 75 ohm) and AES/EBU (110 ohm balanced) digital outputs, with a BNC to BNC coaxial interconnect supplied, along with BNC to phono and phono to BNC adapters supplied. The 8000CDM was built and finished to the company’s typical high standards, making it one of the best British CD transports. The specifications are:
AUDIOLAB 8000CDM CD TRANSPORT and 8000DAC Digital to Analogue Convertor + remote
End: 28.11. 2023 21:47:47 on Tuesday
Audiolab 8000CDM CD player/TRANSPORT Fully Working & Tested No remote
End: 05.10. 2023 05:08:31 on Thursday
AUDIOLAB 8000CDM CD TRANSPORT and 8000DAC Digital to Analogue Convertor + remote
End: 30.09. 2023 06:44:51 on Saturday
AUDIOLAB 8000C HIGH-END VORVERSTÄRKER
End: 19.09. 2023 21:22:43 on Tuesday
- Condition: Used
- Price: 250.0 EUR
- Status: unsold
- Item number: 276030890521
- Seller: peperezzi (104|100.0%)
- Seller information: non commercial
- Item location: Grub
- Ships to: EuropeanUnion
- Shipping: 32,8 EUR
- on EBAY
-
Description
Zum Verkauf steht ein hochwertiger und fantastisch klingender Vorverstärker aus der High-End Schmiede Audiolab. Das Gerät is voll funktionsfähig, optisch auch gut erhalten, mit leichte Gebrauchsspuren. Der Phono-Teil (MM/MC) ist wirklich hervorragend. Weitere Fotos folgen. Weitere Infos auf Anfrage!
Live search