CHD Elektroservis MXC-200 MIDI to DMX ConverterKein original Netzteil. 3xbenutzt. Audio to Midi.Aus den zum Artikel gehörigen technischen Informationen des Herstellers habe ich folgende Daten entnommen: CHD Elektroservis MXC-200 - MIDI toDMX Converter ProduktdetailsBeschreibungFeatures:Steuerung von bis zu 200 Ausgängen - DMX-KanäleJeder Ausgang hat unabhängig einstellbare ParameterMIDI-Befehle für die Steuerung: Note On/Off, Key Aftertouch, CC(Control Changes) oder NRPN (Non Registered Parameters)MIDI-Kanal für die MIDI-Kommunikation frei wählbarexterner Schalter (z.B. Fußschalter) kann zur Steuerung derFunktionen des Konverters angeschlossen werdenAlle Aktivitäten werden auf dem LCD-Display angezeigtAlle Aktivitäten werden von einem benutzerprogrammierbarenParameter gesteuert, der im internen Speicher des Gerätsgespeichert ist. Alle Parameter sind manuell über das Bedienfelddes Geräts programmierbar, so dass keine spezielleProgrammierung von MIDI SysEx-Befehlen erforderlich istAbmessungen: 140 mm (Breite) x 35 mm (Höhe) x 105 mm (Tiefe)XC-200 converter enables to control DMX-512 stage lights via MIDI bus. This allows to control lights from e.g. built-in sequencers of electronic keyboard instruments (the controlled lights are fully synchronized with played song then) or manually directly from the keyboard instruments without the need of special DMX-512 compatible control panel. The converter is designed to control any DMX devices. The converter allows to control of up to 200 outputs – DMX channels.Each of output has independently adjustable parameters.Possible MIDI commands for the lighting apparatus control are Note On/Off, Key Aftertouch, CC (Control Changes) or NRPN (Non Registered Parameters).MIDI channel for MIDI communication is user selectable.An external switches (e.g. Foot Switches) can be connected for control of functions of the converter.All converter’s activities are indicated on backlighted LCD during normal operation as well as during programming.All functions are controlled by a user-programmable parameters that are stored in internal device memory.All parameters are programmable manually from the device’s panel so no special programming MIDI SysEx message are necessary.The device is powered from external power supply adapter – it is not included in the delivery.For each of controlled DMX channels, it is possible to set independently: Default Value – default values of DMX channel after the converter resetConversion Curve – conversion between MIDI input and DMX output data (26 predefined curves)Preheat – minimal value transmitted into DMX channelLimit – limitation of maximal value transmitted into DMX channelAccept Master – “Master” controller enabled / disabled for DMX channel controlAccept Blackout – “Blackout” function enabled / disabled for DMX channel controlThe converter recognizes MIDI commands:Note Off / On incl. Velocity (in Note and Note+Aftertouch modes only)Key Aftertouch (in Note+Aftertouch mode only)Standard Control Changes (ASO, ANO, RAC)Own Control Changes (CCs) defineable by user (in CC mode only)Non Registered Parameters (NRPNs) defineable by user (in NRPN mode only)Common System ResetSystem Exclusive Messages