2 horn ,4 drivers without a brand, probably Western Electric, University or others assembled in Klangfilm projects. removed from large home-made boxes, all 4 in working order. I ship worldwide, please inquire about shipping costs to your country.

Tested Sound output has distortion Will be selling for parts or repair please check all pictures provided for cosmetic condition

This is a Western Electric 551 Horn Driver. Please check the ohm reading. Please take a look at the photos and the video. It seems work very well. But this is as is. The RCA horn on the video is not the part of the sale. What you see is what you get. No Refund and No Return.

You are bidding on a Western Electric Type 549W Horn Speaker Driver from the 1920s. The driver itself is mounted inside a case, with a Type 8-B mounting bracket. The driver is good measuring about 1200 ohms. It is in nice all original condition. I removed the driver from the case so that the type number could be read, and photos taken. There are still seals on the screws that would allow a look inside the driver, so I left them intact, and did not look inside. This was apparently owned by station KMBC, as those call letters are lightly scratched in the case and bracket. The cap over the threaded nipple for attaching the horn is still present. I believe the threads are the same as for a 555 driver. The driver itself, with cap, are black painted solid brass. The case and bracket are black painted iron. It has a nice original Western Electric decal on one side. This driver is not encountered as often as the similar 551W, and the case and bracket are seldom seen. It measures roughly 6 1/8 by 4 1/2 inches in cross section, and is 7 3/4 inches in overall length. It should be a great driver for your horn! Shipping weight is 11 pounds. No shipping to China. Please see my other auctions for more interesting radio and audio items, and tubes.

For sale: original 35 feet (~ 10.7 meters) wire for WE 555 horn driver marked “Middle Frequency ” from WE 1086/87B amplifier system used in Talkie Movie Theater with 1935 ERPI “Mirrophonic” Sound System in New York City. Wires used to provided connection between output sound coil power distribution cabinet/ WE TA-7275 speaker crossover in amplifier/projector room and stage. See pictures of junction box and stage horns distribution box (not included). Actual length is about 35 feet. Solid tinned copper conductor is about 14 Gauge (1.7 mm diameter) in tight braided Black fabric jacket. Wires are very dusty from removing during demolition. Insulation condition: conductor is good and bright after 70 years, pulled from metal tube conduits, see pictures. Wires sold AS IS no return because of age. We combine items for shipping. ?

For sale: original 35 feet (~ 10.7 meters) wire for field coil of WE 555 horn driver marked “Coomon” from WE 1086/87B amplifier system used in Talkie Movie Theater with 1935 Mirrophonic Sound in New York City. Wires used to provided connection between output sound coil power distribution cabinets in amplifier/projector room and stage. See pictures of junction box and stage horns distribution box (not included). Actual length is about 35 feet. Solid tinned copper conductor is about 14 Gauge (1.7 mm diameter) in tight braided White fabric jacket. Wires are very dusty from removing during demolition. Insulation condition: conductor is good and bright after 80 years, pulled from metal tube conduits, see pictures. Wires sold AS IS no return because of age. We combine items for shipping. ?

I have not tested this speaker I don’t know anything about it what you see is what you get. Weighs 12 pounds before packing. These are very hard to come by. Message with questions thank you.

This is a Western Electric 551 Horn Driver in Excellent Condition. Please take a look at the photos and the video. It works very well. The RCA horn on the video is not the part of the sale. What you see is what you get. No Refund and No Return.

You are bidding on a Western Electric Type 549W Horn Speaker Driver from the 1920s. The driver itself is mounted inside a case, with a Type 8-B mounting bracket. The driver is good measuring about 1200 ohms. It is in nice all original condition. I removed the driver from the case so that the type number could be read, and photos taken. There are still seals on the screws that would allow a look inside the driver, so I left them intact, and did not look inside. This was apparently owned by station KMBC, as those call letters are lightly scratched in the case and bracket. The cap over the threaded nipple for attaching the horn is still present. I believe the threads are the same as for a 555 driver. The driver itself, with cap, are black painted solid brass. The case and bracket are black painted iron. It has a nice original Western Electric decal on one side. This driver is not encountered as often as the similar 551W, and the case and bracket are seldom seen. It measures roughly 6 1/8 by 4 1/2 inches in cross section, and is 7 3/4 inches in overall length. It should be a great driver for your horn! Shipping weight is 11 pounds. No shipping to China. Please see my other auctions for more interesting radio and audio items, and tubes.

Pair Western Electric 10-D Loud Speaking Telephone Horns ( No Drivers) This is for a pair of horns ( no drivers) . Sold as is. See photos for cosmetic condition. One looks to have been painted. Due to age these items are being sold AS IS.Disclaimer: When buying almost 50 and 50 plus year old electronic equipment that has not had all parts replaced with new parts there is always the possibility with failure to the 50 year old part/s at any time. Some of the electronic part/s may continue for another 50 years without need of replacement and some electronic part/s may fail a few days after you start using the item.Please visit our store as we get vintage electronics of tube,test,solid state, hifi, audio, etc Many great and rare items as well.

Western Electric 10-D Loud Speaking Telephone Horn Driver and Horn Sold as is untested . Sold as is. See photos for cosmetic condition. Due to age these items are being sold AS IS.Disclaimer: When buying almost 50 and 50 plus year old electronic equipment that has not had all parts replaced with new parts there is always the possibility with failure to the 50 year old part/s at any time. Some of the electronic part/s may continue for another 50 years without need of replacement and some electronic part/s may fail a few days after you start using the item.Please visit our store as we get vintage electronics of tube,test,solid state, hifi, audio, etc Many great and rare items as well.

Antique Western Electric Electric Driver - 551, 349w - PAT. Jan 18, 1921 #3 This listing is for the driver only . See photos. Sold as is. Due to age these items are being sold AS IS.Disclaimer: When buying almost 50 and 50 plus year old electronic equipment that has not had all parts replaced with new parts there is always the possibility with failure to the 50 year old part/s at any time. Some of the electronic part/s may continue for another 50 years without need of replacement and some electronic part/s may fail a few days after you start using the item.Please visit our store as we get vintage electronics of tube,test,solid state, hifi, audio, etc Many great and rare items as well.

Antique Western Electric Electric Driver - 551 - PAT. Jan 18, 1921 #2 This listing is for the driver only . See photos. Sold as is. Due to age these items are being sold AS IS.Disclaimer: When buying almost 50 and 50 plus year old electronic equipment that has not had all parts replaced with new parts there is always the possibility with failure to the 50 year old part/s at any time. Some of the electronic part/s may continue for another 50 years without need of replacement and some electronic part/s may fail a few days after you start using the item.Please visit our store as we get vintage electronics of tube,test,solid state, hifi, audio, etc Many great and rare items as well.

EXCELLENT W.E VACUUM TUBES. STILL IN ORIGINAL PACKING MATERIAL.

Auction for 2 Altec 288B drivers Need diaphragms.Needs repainted For parts only .Please take a look all pictures. I do this for living.I know How to packed.Maybe you will pay little Bid.But I m sure you will be more than happy to pay.You know why. Because u will receive your item in one piece. Shipping International 250.00. Buyer has to declare costume at your country.

You are bidding on a Western Electric horn speaker from the early 1920s. It is in fairly nice condition and the driver is good, measuring about 100 ohms. The brass bell/neck appears to be the same as for the Model 182AW shawphone horn. The driver is smaller than for the shawphone, and has no markings. The driver measures 2 3/8 inches in diameter. The bell is 3 1/2 inches in diameter for an overall height of 12 1/2 inches. I had to add one layer of paper card around the end of the neck for the bell to fit tightly in the driver. It is an interesting horn. It should be great for your Western Electric collection. Shipping weight is 3 pounds. No shipping to China. Please see my other auctions for more interesting radio and audio items, and tubes.

Tweeter con tromba Electron marrè made in italia , perfettamente funzionante . Ho misurato limpedenza è di circa 14 ohm. E in buono stato, come da foto .

Tweeter con tromba Goodmanns Normal 0 14 false false false IT X-NONE X-NONE trebax 5K/20XL completo di potenziometro originale , perfettamente funzionante . E in buono stato, ha solo alcuni graffi come da foto .