thorens tp16 tonearm (not tested) + lift (ok) + armboard (original) + original cable (ok) lift okcables ok tonearm not testedoriginal armboard See photos for condition details

Anti Skating Weight Fadengewicht for Thorens Td 125 Tracking Arm TP25The description of this item has been automatically translated. If you have any questions, please feel free to contact us.THREAD WEIGHTAnti-skating weight for Thorens TD125 for tonearm TP25 THREAD WEIGHT Anti-skating weight for Thorens TD125 for tonearm TP25 Marke Thorens Angebotspaket Nein EAN Nicht zutreffend Modifizierter Artikel Nein Markenkompatibilität Thorens Herstellernummer nicht zutreffend Ausländisches Produkt Nein Herstellungsland und -region Deutschland Produktart Tonarm

Revised Thorens TD125 Turntable With Original TP16 Tracking Arm - Sme OptionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.ATTENTION: This offer does not contain an SME tonearm (optional), but the original Thorens TP16 tonearmIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V, 50Hz or 110/120V, 60Hz (for example USA or world wide) Restored Thorens TD125 or 125 MKII in black burgundy red metallicwith original Thorens TP16 tonearm and Ortofon VinylMaster Alpha as a pickup(Artieklfotos show an SME 3009 Series II with Ortofon 2M blue)Various SME tonearms are optionally possible Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Tonearm: Thorens TP16Pickup:          Ortofon VinylMaster AlphaLimit switch:      NoInner plate: metalPlate bearing:               10mmDevice feet:              height-adjustable spikesBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160,- XXL device feet (pictures 13, 14 and 15): 90,-Height adjustable, made of stainless steel. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Weight approx. 5g): 499,- SME 3009 improved (fixed headshell, eff. Mass 6.5g): 499,- SME 3009 S2 improved (replaceable headshell, eff. Weight 9.5g): 499,- SME 3009 Series II (replaceable headshell, eff. Weight 12.5g): 799,- Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339,- AUDIO-TECHNICA VM 750 SH (Shibata): 439,- AUDIO-TECHNICA VM 760 SLC (special line): 699,-Ortofon 2M Red (elliptical): 109,-Ortofon 2M Blue (elliptical, naked): 229,-Ortofon 2M Bronze (Fineline): 390,-Ortofon 2M Black (Shibata): 599,-Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899,- Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330,- ORTOFON Quintet Blue (elliptical, naked): 470,- ORTOFON Quintet Bronze (Fineline): 660,- ORTOFON Quinted Black (Shibata): 940,- ORTOFON Cadenza Red (Fineline): 1299,- AUDIO-TECHNICA AT-OC9XEB (elliptical): 279,-AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369,- AUDIO-TECHNICA AT-33EV (elliptical): 499,-AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599,-AUDIO-TECHNICA AT-33SA (Shibata): 799,-With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe schwarz , bordeaux rot metallic Modell TD125 oder TD125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD 125 Turntable With TP25 Tracking Arm RareThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available in 220-240V/50Hz or 100-130V/60Hz (for example UNITED STATES)! RESTORED and MODIFIED by ART-AND-SOUND Restored 125 with TP25 tonearm in blue ice metallicOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmHousing with rear connection strip for all required cable connections.The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum. Surface painted (blue ice metallic)The Ortofon OM 5E cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 5E is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 5E and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 143090566194The following parts are available as accessories and not included in this auction:dust covers (to put on the housing):    German eBay-article number is 143090566194Cartridge MM systems including installation:Ortofon 2M Red (elliptical): RRP €110 Ortofon 2M Blue (elliptical, naked): RRP €220 Ortofon 2M Bronze (fine line): RRP €360Ortofon OM 10 (elliptical): RRP €60Ortofon Vinyl Master Silver (Fritz Gyger): RRP €395Cartidge MC systems including installation:Ortofon MC 1 Turbo: RRP €220Ortofon MC 3 Turbo: RRP €380Quintet Red (elliptical): RRP €300Quinted Blue (fine line): RRP €430Quinted Bronze (Fritz Gyger): RRP €630The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

ATTENTION: This offer does not contain an SME tonearm (optional), but the original Thorens TP16 tonearmIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V, 50Hz or 110/120V, 60Hz (for example USA or world wide) Restored Thorens TD125 or 125 MKII in black burgundy red metallicwith original Thorens TP16 tonearm and Ortofon VinylMaster Alpha as a pickup(Artieklfotos show an SME 3009 Series II with Ortofon 2M blue)Various SME tonearms are optionally possible Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Tonearm: Thorens TP16Pickup:          Ortofon VinylMaster AlphaLimit switch:      NoInner plate: metalPlate bearing:               10mmDevice feet:              height-adjustable spikesBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160,- XXL device feet (pictures 13, 14 and 15): 90,-Height adjustable, made of stainless steel. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Weight approx. 5g): 499,- SME 3009 improved (fixed headshell, eff. Mass 6.5g): 499,- SME 3009 S2 improved (replaceable headshell, eff. Weight 9.5g): 499,- SME 3009 Series II (replaceable headshell, eff. Weight 12.5g): 799,- Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339,- AUDIO-TECHNICA VM 750 SH (Shibata): 439,- AUDIO-TECHNICA VM 760 SLC (special line): 699,-Ortofon 2M Red (elliptical): 109,-Ortofon 2M Blue (elliptical, naked): 229,-Ortofon 2M Bronze (Fineline): 390,-Ortofon 2M Black (Shibata): 599,-Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899,- Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330,- ORTOFON Quintet Blue (elliptical, naked): 470,- ORTOFON Quintet Bronze (Fineline): 660,- ORTOFON Quinted Black (Shibata): 940,- ORTOFON Cadenza Red (Fineline): 1299,- AUDIO-TECHNICA AT-OC9XEB (elliptical): 279,-AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369,- AUDIO-TECHNICA AT-33EV (elliptical): 499,-AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599,-AUDIO-TECHNICA AT-33SA (Shibata): 799,-With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By