Teac Model 2A MB-20 Vu Meters Rare Audio Miscelatore 6 Ch Vintage 1976 Work GoodLa descrizione di questo articolo è stata tradotta automaticamente. Se hai dubbi o domande, ti invitiamo a contattarci. TEAC Modello 2A MB-20 VU Meter RARO MIXER AUDIO 6 Ch Vintage 1976 WORK Good Look TEAC M-2 ¥ 59.800 (intorno al 1976) TEAC MB-20 Metro ponte (1979-81) Un mixer multicanale con funzioni di missaggio compatte. È possibile selezionare ingressi a 6 canali, modificarne liberamente il tono e limmagine e inviare uscite a 4 canali. Può essere aggiornato a un mixer a 12 canali collegando in cascata un altro M-2. È possibile combinare con il meter bridge a 4 canali MB-20 venduto separatamente. Collegato alluscita di linea dellM-2, è possibile monitorare il livello con il VU meter e lindicatore del livello di picco (acceso a + 10 dB). È inoltre possibile utilizzare il pulsante BUSS/TAPE per commutare tra luscita dellM-2 e lingresso dellingresso Tape, abilitando la registrazione overtab e il missaggio da un registratore multitraccia. Lunità dispone di: 6 ingressi microfonici da 1/4 e 6 ingressi di linea RCA 6 uscite RCA direct cue 4 uscite di linea RCA e 4 uscite ausiliarie RCA 4 inserti di ricezione/invio di accesso RCA e 4 ingressi bus Attenuazione del microfono per ogni ingresso EQ per ogni canale Pulsanti di assegnazione per indirizzare il segnale a una o più tracce di un registratore a 4 tracce Controlli panoramica Sei fader di ingresso, un master fader Digitare Mixer audio Ingresso microfono Sensibilità: -60 dB (adatto per microfono da 150 ? ~ 10k ?) Impedenza: 50k ? (sbilanciato) Livello di ingresso massimo: -10 dB (posizione attenuatore 20 dB) Ingresso di linea Sensibilità: -10 dB (0,3 V) Impedenza: 30k ohm (sbilanciato) Livello di ingresso massimo: + 20 dB (10 V) Line in e aux out Impedenza di carico: 10k ? o più (sbilanciato) Livello di potenza massimo: + 10 dB (3 V) Margine di picco: +20 dB Rapporto SN (valutato a -50 dB, ingresso microfono) Ingresso singolo: 72 dB WTD o superiore Ingresso totale: 65 dB WTD o superiore Caratteristica di frequenza da 30 Hz a 20 kHz ± 2 dB Diafonia (1 kHz) 50 dB o più Fattore di distorsione0,3% THD o superiore Attenuazione fader60 dB o più Uscita coda Route 6 Uscita bus Percorso 4 Ingresso/uscita accessori Quattro sistemi ciascuno Alimentazione 100 V CA, 50 Hz/60 Hz Consumo energetico3W Dimensioni esterne Larghezza 340x Altezza 90x Profondità 290 mm Peso5kg Venduto separatamente TRASFORMATORI di ingresso Modello 109A (600 ? : 22k ?, ¥ 5.000)È possibile selezionare ingressi a 6 canali, modificarne liberamente il tono e limmagine e inviare uscite a 4 canali. È possibile combinare con il meter bridge a 4 canali MB-20 venduto separatamente. Collegato alluscita di linea dellM-2, è possibile monitorare il livello con il VU meter e lindicatore del livello di picco (acceso a + 10 dB). È inoltre possibile utilizzare il pulsante BUSS/TAPE per commutare tra luscita dellM-2 e lingresso dellingresso Tape, abilitando la registrazione overtab e il missaggio da un registratore multitraccia. Pulsanti di assegnazione per indirizzare il segnale a una o più tracce di un registratore a 4 tracce Rapporto SN (valutato a -50 dB, ingresso microfono) Ingresso singolo: 72 dB WTD o superiore Venduto separatamente TRASFORMATORI di ingresso Mode Características Ecualizador Características 6 Channel Características VU METER Número de canales 6 Garantía del fabricante Sin garantía Analógico/Digital Analógico EAN No aplicable Marca TEAC TASCAM Tipo de unidad Unidad País/Región de fabricación Japón Modelo Model 2A + MB-20 VU Meter Cantidad de unidades 1

Teac Model 2A MB-20 Vu Mètres Rare Audio Mixer 6 Ch Vintage 1976 Work Good LookCette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. TEAC Modèle 2A MB-20 VU-mètres RARE MIXEUR AUDIO 6 Ch Vintage 1976 TRAVAIL Bon Look TEAC M-2 59 800 ¥ (vers 1976) TEAC MB-20 Pont du mètre (1979-81) Un mélangeur multicanal avec des fonctions de mixage compactes. Vous pouvez sélectionner des entrées à 6 canaux, modifier librement leur tonalité et leur image, et sortir des sorties à 4 canaux. Il peut être mis à niveau vers un mélangeur à 12 canaux en cascadant un autre M-2. Il est possible de combiner avec le pont de compteur à 4 canaux MB-20 vendu séparément. Connecté à la sortie ligne du M-2, vous pouvez contrôler le niveau avec le VU-mètre et lindicateur de niveau de crête (allumé à + 10 dB). Vous pouvez également utiliser le bouton BUSS/TAPE pour basculer entre la sortie du M-2 et lentrée de lentrée de bande, permettant lenregistrement overtab et le mixage à partir dun enregistreur multipiste. Lunité a : 6 entrées micro 1/4 et 6 entrées ligne RCA 6 sorties RCA directes 4 sorties ligne RCA et 4 sorties auxiliaires RCA 4 inserts de réception/envoi daccès RCA et 4 entrées de bus Atténuation du micro pour chaque entrée EQ pour chaque canal Boutons dassignation pour acheminer le signal vers une ou plusieurs pistes dun magnétophone à 4 pistes Commandes de panoramique Six faders dentrée, un fader principal Mélangeur audio Sensibilité dentrée du microphone : -60 dB (convient pour un microphone de 150 ? ~ 10 k ?) Impédance : 50k ? (asymétrique) Niveau dentrée maximum : -10dB (position atténuateur 20dB) Sensibilité entrée ligne : -10dB (0.3V) Impédance : 30k ohms (asymétrique) Niveau dentrée maximal : + 20dB (10V) Impédance dentrée et de sortie auxiliaire : 10 k ? ou plus (asymétrique) Niveau de puissance maximum : + 10dB (3V) Marge de crête : +20dB Rapport SN (évalué à -50dB, entrée microphone) Entrée unique : 72 dB WTD ou supérieur Entrée totale : 65 dB WTD ou plus Caractéristique de fréquence 30 Hz à 20 kHz ± 2 dB Diaphonie (1 kHz) 50 dB ou plus Facteur de distorsion 0,3 % THD ou plus Atténuation du fader60 dB ou plus Sortie de file dattente Route 6 Sortie bus Itinéraire 4 Entrée/sortie accessoire Quatre systèmes chacun Alimentation100 VCA, 50Hz/60Hz Consommation dénergie3W Dimensions extérieuresLargeur 340x Hauteur 90x Profondeur 290 mm Poids5kg Vendus séparément TRANSFORMATEURS dentrée modèle 109A (600 ? : 22k ?, 5 000 ¥)Vous pouvez sélectionner des entrées à 6 canaux, modifier librement leur tonalité et leur image, et sortir des sorties à 4 canaux. Il est possible de combiner avec le pont de compteur à 4 canaux MB-20 vendu séparément. Connecté à la sortie ligne du M-2, vous pouvez contrôler le niveau avec le VU-mètre et lindicateur de niveau de crête (allumé à + 10 dB). Vous pouvez également utiliser le bouton BUSS/TAPE pour basculer entre la sortie du M-2 et lentrée de lentrée de bande, permettant lenregistrement overtab et le mixage à partir dun enregistreur multipiste. Boutons dassignation pour acheminer le signal vers une ou plusieurs pistes dun magnétophone à 4 pistes Sensibilité dentrée du microphone : -60 dB (convient pour un microphone de 150 ? ~ 10 k ?) Rapport SN (évalué à -50dB, entré Características Ecualizador Características 6 Channel Características VU METER Número de canales 6 Garantía del fabricante Sin garantía Analógico/Digital Analógico EAN No aplicable Marca TEAC TASCAM Tipo de unidad Unidad País/Región de fabricación Japón Modelo Model 2A + MB-20 VU Meter Cantidad de unidades 1

Teac Model 2A MB-20 Vu Meter Rare Audio Mixer 6 Ch Vintage 1976 Work Good LookDie Beschreibung dieses Artikels erfolgte durch automatische Übersetzung. Bei anstehenden Fragen, wenden Sie sich bitte an uns. TEAC Modell 2A MB-20 VU-Meter, seltener Audiomixer, 6 Kanäle, Jahrgang 1976, gute Optik TEAC M-2 59.800 Yen (ca. 1976) TEAC MB-20 Meterbrücke (1979–81) Ein Mehrkanalmixer mit kompakten Mischfunktionen. Sie können 6-Kanal-Eingänge auswählen, deren Ton und Bild frei ändern und 4-Kanal-Ausgänge ausgeben. Durch Kaskadierung eines weiteren M-2 kann es zu einem 12-Kanal-Mischpult aufgerüstet werden. Eine Kombination mit der separat erhältlichen 4-Kanal-Messbrücke MB-20 ist möglich. An den Line-Ausgang des M-2 angeschlossen, können Sie den Pegel mit dem VU-Meter und der Spitzenpegelanzeige (leuchtet bei + 10 dB) überwachen. Mit der BUSS/TAPE-Taste können Sie auch zwischen dem Ausgang des M-2 und dem Eingang vom Bandeingang umschalten und so Overtab-Aufnahmen und Mixdowns von einem Mehrspurrecorder aus ermöglichen. Das Gerät verfügt über: 6 1/4-Zoll-Mikrofoneingänge und 6 RCA-Line-Eingänge 6 RCA-Direkt-Cue-Ausgänge 4 RCA-Line-Ausgänge und 4 RCA-Aux-Ausgänge 4 RCA-Zugangs-Empfangs-/Sendeeinsätze und 4 Bus-Eingänge Mikrofondämpfung für jeden Eingang EQ für jeden Kanal Zuweisungstasten zum Weiterleiten des Signals an eine oder mehrere Spuren eines 4-Spur-Kassettendecks Pan-Steuerung Sechs Eingangsfader, ein Master-Fader Geben Sie Audiomixer ein Empfindlichkeit des Mikrofoneingangs: -60 dB (geeignet für Mikrofone mit 150 ? ~ 10 k ?) Impedanz: 50k ? (unsymmetrisch) Maximaler Eingangspegel: -10 dB (20-dB-Dämpfungsposition) Empfindlichkeit des Line-Eingangs: -10 dB (0,3 V) Impedanz: 30 kOhm (unsymmetrisch) Maximaler Eingangspegel: + 20 dB (10 V) Line-In und Aux-OutLastimpedanz: 10 k? oder mehr (unsymmetrisch) Maximaler Leistungspegel: + 10 dB (3 V) Spitzenspielraum: +20 dB SN-Verhältnis (Nennwert -50 dB, Mikrofoneingang) Einzeleingang: 72 dB WTD oder höher Gesamteingang: 65 dB WTD oder höher Frequenzgang 30 Hz bis 20 kHz ± 2 dB Übersprechen (1 kHz) 50 dB oder mehr Verzerrungsfaktor: 0,3 % THD oder mehr Fader-Dämpfung: 60 dB oder mehr Warteschlangenausgabe Route 6 Busausgang Linie 4 Zubehöreingang/-ausgang Jeweils vier Systeme Stromversorgung 100 VAC, 50 Hz/60 Hz Stromverbrauch: 3 W Außenmaße: Breite 340 x Höhe 90 x Tiefe 290 mm Gewicht5kg Separat erhältlich. Eingangstransformatoren, Modell 109A (600 ?: 22 k?, ¥ 5.000)TEAC Modell 2A MB-20 VU-Meter, seltener Audiomixer, 6 Kanäle, Jahrgang 1976, gute Optik Sie können 6-Kanal-Eingänge auswählen, deren Ton und Bild frei ändern und 4-Kanal-Ausgänge ausgeben. Durch Kaskadierung eines weiteren M-2 kann es zu einem 12-Kanal-Mischpult aufgerüstet werden. An den Line-Ausgang des M-2 angeschlossen, können Sie den Pegel mit dem VU-Meter und der Spitzenpegelanzeige (leuchtet bei + 10 dB) überwachen. Mit der BUSS/TAPE-Taste können Sie auch zwischen dem Ausgang des M-2 und dem Eingang vom Bandeingang umschalten und so Overtab-Aufnahmen und Mixdowns von einem Mehrspurrecorder aus ermöglichen. Zuweisungstasten zum Weiterleiten des Signals an eine oder mehrere Spuren eines 4-Spur-Kassettendecks Empfindlichkeit des Mikrofoneingangs: -60 dB (geeignet für Mikrofone mit 15 Características Ecualizador Características 6 Channel Características VU METER Número de canales 6 Garantía del fabricante Sin garantía Analógico/Digital Analógico EAN No aplicable Marca TEAC TASCAM Tipo de unidad Unidad País/Región de fabricación Japón Modelo Model 2A + MB-20 VU Meter Cantidad de unidades 1

Normal 0 false false false EN-US X-NONE X-NONE Satisfaction is guaranteed, returns are accepted. If you see more than one item you would like, I will combine them all to save you money on shipping.

Teac Model 2A Professional Analogue Audio Mixer 6 Ch Vintage 1976 Work Good LookDie Beschreibung dieses Artikels erfolgte durch automatische Übersetzung. Bei anstehenden Fragen, wenden Sie sich bitte an uns. TEAC Modell 2A Professioneller analoger MIXER 6 Kanal Vintage 1976 ARBEIT Guter Look TEAC M-2 59.800 Yen (ca. 1976) Ein Mehrkanalmixer mit kompakten Mischfunktionen. Sie können 6-Kanal-Eingänge auswählen, deren Ton und Bild frei ändern und 4-Kanal-Ausgänge ausgeben. Durch Kaskadierung eines weiteren M-2 kann es zu einem 12-Kanal-Mischpult aufgerüstet werden. Eine Kombination mit der separat erhältlichen 4-Kanal-Messbrücke MB-20 ist möglich. An den Line-Ausgang des M-2 angeschlossen, können Sie den Pegel mit dem VU-Meter und der Spitzenpegelanzeige (leuchtet bei + 10 dB) überwachen. Mit der BUSS/TAPE-Taste können Sie auch zwischen dem Ausgang des M-2 und dem Eingang vom Bandeingang umschalten und so Overtab-Aufnahmen und Mixdowns von einem Mehrspurrecorder aus ermöglichen. Das Gerät verfügt über: 6 1/4-Zoll-Mikrofoneingänge und 6 RCA-Line-Eingänge 6 RCA-Direkt-Cue-Ausgänge 4 RCA-Line-Ausgänge und 4 RCA-Aux-Ausgänge 4 RCA-Zugangs-Empfangs-/Sendeeinsätze und 4 Bus-Eingänge Mikrofondämpfung für jeden Eingang EQ für jeden Kanal Zuweisungstasten zum Weiterleiten des Signals an eine oder mehrere Spuren eines 4-Spur-Kassettendecks Pan-Steuerung Sechs Eingangsfader, ein Master-Fader Geben Sie Audiomixer ein Empfindlichkeit des Mikrofoneingangs: -60 dB (geeignet für Mikrofone mit 150 ? ~ 10 k ?) Impedanz: 50k ? (unsymmetrisch) Maximaler Eingangspegel: -10 dB (20-dB-Dämpfungsposition) Empfindlichkeit des Line-Eingangs: -10 dB (0,3 V) Impedanz: 30 kOhm (unsymmetrisch) Maximaler Eingangspegel: + 20 dB (10 V) Line-In und Aux-OutLastimpedanz: 10 k? oder mehr (unsymmetrisch) Maximaler Leistungspegel: + 10 dB (3 V) Spitzenspielraum: +20 dB SN-Verhältnis (Nennwert -50 dB, Mikrofoneingang) Einzeleingang: 72 dB WTD oder höher Gesamteingang: 65 dB WTD oder höher Frequenzgang 30 Hz bis 20 kHz ± 2 dB Übersprechen (1 kHz) 50 dB oder mehr Verzerrungsfaktor: 0,3 % THD oder mehr Fader-Dämpfung: 60 dB oder mehr Warteschlangenausgabe Route 6 Busausgang Linie 4 Zubehöreingang/-ausgang Jeweils vier Systeme Stromversorgung 100 VAC, 50 Hz/60 Hz Stromverbrauch: 3 W Außenmaße: Breite 340 x Höhe 90 x Tiefe 290 mm Gewicht5kg Separat erhältlich. Eingangstransformatoren, Modell 109A (600 ?: 22 k?, ¥ 5.000)TEAC Modell 2A Professioneller analoger MIXER 6 Kanal Vintage 1976 ARBEIT Guter Look Sie können 6-Kanal-Eingänge auswählen, deren Ton und Bild frei ändern und 4-Kanal-Ausgänge ausgeben. Durch Kaskadierung eines weiteren M-2 kann es zu einem 12-Kanal-Mischpult aufgerüstet werden. An den Line-Ausgang des M-2 angeschlossen, können Sie den Pegel mit dem VU-Meter und der Spitzenpegelanzeige (leuchtet bei + 10 dB) überwachen. Mit der BUSS/TAPE-Taste können Sie auch zwischen dem Ausgang des M-2 und dem Eingang vom Bandeingang umschalten und so Overtab-Aufnahmen und Mixdowns von einem Mehrspurrecorder aus ermöglichen. Zuweisungstasten zum Weiterleiten des Signals an eine oder mehrere Spuren eines 4-Spur-Kassettendecks Empfindlichkeit des Mikrofoneingangs: -60 dB (geeignet für Mikrofone mit 150 ? Características Ecualizador Características 6 Channel Número de canales 6 Garantía del fabricante Sin garantía Analógico/Digital Analógico EAN No aplicable Marca TEAC TASCAM Tipo de unidad Unidad País/Región de fabricación Japón Modelo Model 2A Cantidad de unidades 1

TEAC Model 2A MELANGEUR Analogique Professionnel 6 Canaux Vintage 1976 WORK Good Look TEAC M-2 59 800 ¥ (vers 1976) Un mélangeur multicanal avec des fonctions de mixage compactes. Vous pouvez sélectionner des entrées à 6 canaux, modifier librement leur tonalité et leur image, et sortir des sorties à 4 canaux. Il peut être mis à niveau vers un mélangeur à 12 canaux en cascadant un autre M-2. Il est possible de combiner avec le pont de compteur à 4 canaux MB-20 vendu séparément. Connecté à la sortie ligne du M-2, vous pouvez contrôler le niveau avec le VU-mètre et lindicateur de niveau de crête (allumé à + 10 dB). Vous pouvez également utiliser le bouton BUSS/TAPE pour basculer entre la sortie du M-2 et lentrée de lentrée de bande, permettant lenregistrement overtab et le mixage à partir dun enregistreur multipiste. Lunité a : 6 entrées micro 1/4 et 6 entrées ligne RCA 6 sorties RCA directes 4 sorties ligne RCA et 4 sorties auxiliaires RCA 4 inserts de réception/envoi daccès RCA et 4 entrées de bus Atténuation du micro pour chaque entrée EQ pour chaque canal Boutons dassignation pour acheminer le signal vers une ou plusieurs pistes dun magnétophone à 4 pistes Commandes de panoramique Six faders dentrée, un fader principal Mélangeur audio Sensibilité dentrée du microphone : -60 dB (convient pour un microphone de 150 ? ~ 10 k ?) Impédance : 50k ? (asymétrique) Niveau dentrée maximum : -10dB (position atténuateur 20dB) Sensibilité entrée ligne : -10dB (0.3V) Impédance : 30k ohms (asymétrique) Niveau dentrée maximal : + 20dB (10V) Impédance dentrée et de sortie auxiliaire : 10 k ? ou plus (asymétrique) Niveau de puissance maximum : + 10dB (3V) Marge de crête : +20dB Rapport SN (évalué à -50dB, entrée microphone) Entrée unique : 72 dB WTD ou supérieur Entrée totale : 65 dB WTD ou plus Caractéristique de fréquence 30 Hz à 20 kHz ± 2 dB Diaphonie (1 kHz) 50 dB ou plus Facteur de distorsion 0,3 % THD ou plus Atténuation du fader60 dB ou plus Sortie de file dattente Route 6 Sortie bus Itinéraire 4 Entrée/sortie accessoire Quatre systèmes chacun Alimentation100 VCA, 50Hz/60Hz Consommation dénergie3W Dimensions extérieuresLargeur 340x Hauteur 90x Profondeur 290 mm Poids5kg Vendus séparément TRANSFORMATEURS dentrée modèle 109A (600 ? : 22k ?, 5 000 ¥)TEAC Model 2A MELANGEUR Analogique Professionnel 6 Canaux Vintage 1976 WORK Good Look Vous pouvez sélectionner des entrées à 6 canaux, modifier librement leur tonalité et leur image, et sortir des sorties à 4 canaux. Il est possible de combiner avec le pont de compteur à 4 canaux MB-20 vendu séparément. Connecté à la sortie ligne du M-2, vous pouvez contrôler le niveau avec le VU-mètre et lindicateur de niveau de crête (allumé à + 10 dB). Vous pouvez également utiliser le bouton BUSS/TAPE pour basculer entre la sortie du M-2 et lentrée de lentrée de bande, permettant lenregistrement overtab et le mixage à partir dun enregistreur multipiste. Boutons dassignation pour acheminer le signal vers une ou plusieurs pistes dun magnétophone à 4 pistes Sensibilité dentrée du microphone : -6

Teac Model 2A Professionnel Analogue Audio Mixer 6 Ch Vintage 1976 Work Bon LookCette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. TEAC Model 2A MELANGEUR Analogique Professionnel 6 Canaux Vintage 1976 WORK Good Look TEAC M-2 59 800 ¥ (vers 1976) Un mélangeur multicanal avec des fonctions de mixage compactes. Vous pouvez sélectionner des entrées à 6 canaux, modifier librement leur tonalité et leur image, et sortir des sorties à 4 canaux. Il peut être mis à niveau vers un mélangeur à 12 canaux en cascadant un autre M-2. Il est possible de combiner avec le pont de compteur à 4 canaux MB-20 vendu séparément. Connecté à la sortie ligne du M-2, vous pouvez contrôler le niveau avec le VU-mètre et lindicateur de niveau de crête (allumé à + 10 dB). Vous pouvez également utiliser le bouton BUSS/TAPE pour basculer entre la sortie du M-2 et lentrée de lentrée de bande, permettant lenregistrement overtab et le mixage à partir dun enregistreur multipiste. Lunité a : 6 entrées micro 1/4 et 6 entrées ligne RCA 6 sorties RCA directes 4 sorties ligne RCA et 4 sorties auxiliaires RCA 4 inserts de réception/envoi daccès RCA et 4 entrées de bus Atténuation du micro pour chaque entrée EQ pour chaque canal Boutons dassignation pour acheminer le signal vers une ou plusieurs pistes dun magnétophone à 4 pistes Commandes de panoramique Six faders dentrée, un fader principal Mélangeur audio Sensibilité dentrée du microphone : -60 dB (convient pour un microphone de 150 ? ~ 10 k ?) Impédance : 50k ? (asymétrique) Niveau dentrée maximum : -10dB (position atténuateur 20dB) Sensibilité entrée ligne : -10dB (0.3V) Impédance : 30k ohms (asymétrique) Niveau dentrée maximal : + 20dB (10V) Impédance dentrée et de sortie auxiliaire : 10 k ? ou plus (asymétrique) Niveau de puissance maximum : + 10dB (3V) Marge de crête : +20dB Rapport SN (évalué à -50dB, entrée microphone) Entrée unique : 72 dB WTD ou supérieur Entrée totale : 65 dB WTD ou plus Caractéristique de fréquence 30 Hz à 20 kHz ± 2 dB Diaphonie (1 kHz) 50 dB ou plus Facteur de distorsion 0,3 % THD ou plus Atténuation du fader60 dB ou plus Sortie de file dattente Route 6 Sortie bus Itinéraire 4 Entrée/sortie accessoire Quatre systèmes chacun Alimentation100 VCA, 50Hz/60Hz Consommation dénergie3W Dimensions extérieuresLargeur 340x Hauteur 90x Profondeur 290 mm Poids5kg Vendus séparément TRANSFORMATEURS dentrée modèle 109A (600 ? : 22k ?, 5 000 ¥)TEAC Model 2A MELANGEUR Analogique Professionnel 6 Canaux Vintage 1976 WORK Good Look Vous pouvez sélectionner des entrées à 6 canaux, modifier librement leur tonalité et leur image, et sortir des sorties à 4 canaux. Il est possible de combiner avec le pont de compteur à 4 canaux MB-20 vendu séparément. Connecté à la sortie ligne du M-2, vous pouvez contrôler le niveau avec le VU-mètre et lindicateur de niveau de crête (allumé à + 10 dB). Vous pouvez également utiliser le bouton BUSS/TAPE pour basculer entre la sortie du M-2 et lentrée de lentrée de bande, permettant lenregistrement overtab et le mixage à partir dun enregistreur multipiste. Boutons dassignation pour acheminer le signal vers une ou plusieurs pistes dun magnétophone à 4 pistes Sensibilité dentrée du microphone : -6 Características Ecualizador Características 6 Channel Número de canales 6 Garantía del fabricante Sin garantía Analógico/Digital Analógico EAN No aplicable Marca TEAC TASCAM Tipo de unidad Unidad País/Región de fabricación Japón Modelo Model 2A Cantidad de unidades 1

Remote control for TEAC CD player Applicable model: VRDS-25x Remote control for TEAC CD player. Applicable model: VRDS-25x Custom-made, limited-edition remote control for vintage CD player. (Image 2) A compact remote with all the essential functions, featuring only the most commonly used buttons from the manufacturers original model (Image 1). Its superior design makes it both easy to operate and handle. This is a brand-new remote control with an excellent bang for your buck, ensuring decades of reliable use without issues common to older, original models from the manufacturer, such as the following: ? Buttons require strong pressure to respond. ? Some buttons dont work properly. ? Battery terminals are rusty. ? It only works when close to the player. ? Battery drains quickly. ? The back cover is cracked, causing the battery to fall out. Customer Reviews ? M (Tokyo) Since I began using this remote, my music-listening experience has completely changed for the better. It feels like my fingers and the player are connected, and I can intuitively control everything. This is exactly what I was looking for. Even when I’m enjoying music in a dark room, the remote’s white color means I never struggle to use it. Since getting this remote, Ive stopped using the manufacturers clunkier version, with its overwhelming number of functions. O (Kagoshima) I used to have trouble immersing myself in music and soon got tired of the sound quality, and for some reason I kept buying new equipment right away, but after getting this remote control, I finally calmed down. I was surprised how important it was to be free from the stress of difficult to operate the remote control! K (Kanagawa) The original remote control was difficult to use because the layout of the buttons was confusing, the PLAY and STOP buttons were far apart, and there were many functions that I hardly use. I threw it out the window immediately after purchasing this. S (Osaka) The button layout is excellent, and although its simple, it covers the essential functions such as repeat, display, time, volume, and program play. Its convenient because I can perform the basics without even looking at the remote. It has an aesthetic, high-end look to it, making it all the nicer to have. Thank you! T (USA) Recently, it has been getting harder and harder for me to see close up and it has become tedious to perform complicated operations. This remote control is great because I can do most of the operations just by placing my thumb on the center of the remote control. I bought it with the intention of using it as a sub-machine, but it has been used as my main remote control. small packet

TEAC MODEL NO LS-MC95 BOOKSHELF 2 WAY SPEAKER SYSTEM Has Been Tested And Is Working In Excellent Condition Will Ship Out As Soon As Possible On Jan-10-24 at 16:29:02 PST, seller added the following information: Sold TEAC CD PLAYER Amplifier only have the speakers left. Will sell them for $50

Original Teac RC-872 Home Remote Control for Model 01-EXM10000-00 RT01EXM1000000. Batteries not included.

You are purchasing a Teac PD-D2410 CD Changer. This has been tested and works great. Good used condition. Light wear from normal use, please see pictures for condition details. Remote, manual and original box are NOT included.Please feel free to contact us with any questions or concerns. Shipping Details: All US shipments to the Lower 48 States are free for this item and includes a tracking number. All items are shipped within 1-2 business days. International shipping is processed through the Global Shipping Program ONLY. Please contact us if you need any more information. We are NOT responsible for ANY customs fees or taxes. Returns: We will accept any item back for a return within 30 days as long as the item is returned in the same condition it arrived in with all included items. Payment: Payment is due within 48 hours of purchase.

Normal 0 false false false EN-US X-NONE X-NONE Satisfaction is guaranteed, returns are accepted. If you see more than one item you would like, I will combine them all to save you money on shipping.

TEAC MODEL NO LS-MC95 BOOKSHELF 2 WAY SPEAKER SYSTEM Has Been Tested And Is Working In Excellent Condition Will Ship Out As Soon As Possible On Jan-10-24 at 16:29:02 PST, seller added the following information: Sold TEAC CD PLAYER Amplifier only have the speakers left. Will sell them for $50

Original Teac RC-872 Home Remote Control for Model 01-EXM10000-00 RT01EXM1000000. Batteries not included.

Remote control for TEAC CD player Applicable model: VRDS-25x Remote control for TEAC CD player. Applicable model: VRDS-25x Custom-made, limited-edition remote control for vintage CD player. (Image 2) A compact remote with all the essential functions, featuring only the most commonly used buttons from the manufacturers original model (Image 1). Its superior design makes it both easy to operate and handle. This is a brand-new remote control with an excellent bang for your buck, ensuring decades of reliable use without issues common to older, original models from the manufacturer, such as the following: ? Buttons require strong pressure to respond. ? Some buttons dont work properly. ? Battery terminals are rusty. ? It only works when close to the player. ? Battery drains quickly. ? The back cover is cracked, causing the battery to fall out. Customer Reviews ? M (Tokyo) Since I began using this remote, my music-listening experience has completely changed for the better. It feels like my fingers and the player are connected, and I can intuitively control everything. This is exactly what I was looking for. Even when I’m enjoying music in a dark room, the remote’s white color means I never struggle to use it. Since getting this remote, Ive stopped using the manufacturers clunkier version, with its overwhelming number of functions. O (Kagoshima) I used to have trouble immersing myself in music and soon got tired of the sound quality, and for some reason I kept buying new equipment right away, but after getting this remote control, I finally calmed down. I was surprised how important it was to be free from the stress of difficult to operate the remote control! K (Kanagawa) The original remote control was difficult to use because the layout of the buttons was confusing, the PLAY and STOP buttons were far apart, and there were many functions that I hardly use. I threw it out the window immediately after purchasing this. S (Osaka) The button layout is excellent, and although its simple, it covers the essential functions such as repeat, display, time, volume, and program play. Its convenient because I can perform the basics without even looking at the remote. It has an aesthetic, high-end look to it, making it all the nicer to have. Thank you! T (USA) Recently, it has been getting harder and harder for me to see close up and it has become tedious to perform complicated operations. This remote control is great because I can do most of the operations just by placing my thumb on the center of the remote control. I bought it with the intention of using it as a sub-machine, but it has been used as my main remote control. small packet

Good working condition. Minor cosmetic wear from use

Teac Subwoofer Model MC-DX32i Micro HI-FI System 2.B4 *Works. Excellent working condition

Is used in good working condition

Up for sale are a Set of 2 Teac Speakers.The Floor S[eaker is 15.5 tall & a small Compact / Shelf S[eaker is 8.25 tall. Both have the Model #s LSR-100. 5 1CH SPEAKER SYSTEM. Blond colored wood, great condition, minor wear/tear. They have been tested and work good. Sold as shown please view pictures and ask questions before buying. Smoke free home. Visit my store for more electronics I will combine shipping when able. Shipping may vary based on location & cost. The larger speaker is a heavy piece and will reflect this in shipping. THANK YOU!

TEAC MODEL NO LS-MC95 BOOKSHELF 2 WAY SPEAKER SYSTEM Has Been Tested And Is Working In Excellent Condition Will Ship Out As Soon As Possible On Jan-10-24 at 16:29:02 PST, seller added the following information: Sold TEAC CD PLAYER Amplifier only have the speakers left. Will sell them for $50

Original Teac RC-872 Home Remote Control for Model 01-EXM10000-00 RT01EXM1000000. Batteries not included.

Remote control for TEAC CD player Applicable model: VRDS-25x Remote control for TEAC CD player. Applicable model: VRDS-25x Custom-made, limited-edition remote control for vintage CD player. (Image 2) A compact remote with all the essential functions, featuring only the most commonly used buttons from the manufacturers original model (Image 1). Its superior design makes it both easy to operate and handle. This is a brand-new remote control with an excellent bang for your buck, ensuring decades of reliable use without issues common to older, original models from the manufacturer, such as the following: ? Buttons require strong pressure to respond. ? Some buttons dont work properly. ? Battery terminals are rusty. ? It only works when close to the player. ? Battery drains quickly. ? The back cover is cracked, causing the battery to fall out. Customer Reviews ? M (Tokyo) Since I began using this remote, my music-listening experience has completely changed for the better. It feels like my fingers and the player are connected, and I can intuitively control everything. This is exactly what I was looking for. Even when I’m enjoying music in a dark room, the remote’s white color means I never struggle to use it. Since getting this remote, Ive stopped using the manufacturers clunkier version, with its overwhelming number of functions. O (Kagoshima) I used to have trouble immersing myself in music and soon got tired of the sound quality, and for some reason I kept buying new equipment right away, but after getting this remote control, I finally calmed down. I was surprised how important it was to be free from the stress of difficult to operate the remote control! K (Kanagawa) The original remote control was difficult to use because the layout of the buttons was confusing, the PLAY and STOP buttons were far apart, and there were many functions that I hardly use. I threw it out the window immediately after purchasing this. S (Osaka) The button layout is excellent, and although its simple, it covers the essential functions such as repeat, display, time, volume, and program play. Its convenient because I can perform the basics without even looking at the remote. It has an aesthetic, high-end look to it, making it all the nicer to have. Thank you! T (USA) Recently, it has been getting harder and harder for me to see close up and it has become tedious to perform complicated operations. This remote control is great because I can do most of the operations just by placing my thumb on the center of the remote control. I bought it with the intention of using it as a sub-machine, but it has been used as my main remote control. small packet

Remote control for TEAC CD player Applicable model: VRDS-25 Remote control for TEAC CD player. Applicable model: VRDS-25 Custom-made, limited-edition remote control for vintage CD player. (Image 2) A compact remote with all the essential functions, featuring only the most commonly used buttons from the manufacturers original model (Image 1). Its superior design makes it both easy to operate and handle. This is a brand-new remote control with an excellent bang for your buck, ensuring decades of reliable use without issues common to older, original models from the manufacturer, such as the following: ? Buttons require strong pressure to respond. ? Some buttons dont work properly. ? Battery terminals are rusty. ? It only works when close to the player. ? Battery drains quickly. ? The back cover is cracked, causing the battery to fall out. Customer Reviews ? M (Tokyo) Since I began using this remote, my music-listening experience has completely changed for the better. It feels like my fingers and the player are connected, and I can intuitively control everything. This is exactly what I was looking for. Even when I’m enjoying music in a dark room, the remote’s white color means I never struggle to use it. Since getting this remote, Ive stopped using the manufacturers clunkier version, with its overwhelming number of functions. O (Kagoshima) I used to have trouble immersing myself in music and soon got tired of the sound quality, and for some reason I kept buying new equipment right away, but after getting this remote control, I finally calmed down. I was surprised how important it was to be free from the stress of difficult to operate the remote control! K (Kanagawa) The original remote control was difficult to use because the layout of the buttons was confusing, the PLAY and STOP buttons were far apart, and there were many functions that I hardly use. I threw it out the window immediately after purchasing this. S (Osaka) The button layout is excellent, and although its simple, it covers the essential functions such as repeat, display, time, volume, and program play. Its convenient because I can perform the basics without even looking at the remote. It has an aesthetic, high-end look to it, making it all the nicer to have. Thank you! T (USA) Recently, it has been getting harder and harder for me to see close up and it has become tedious to perform complicated operations. This remote control is great because I can do most of the operations just by placing my thumb on the center of the remote control. I bought it with the intention of using it as a sub-machine, but it has been used as my main remote control. small packet

Remote control for TEAC CD player Applicable model: VRDS-25xs Remote control for TEAC CD player. Applicable model: VRDS-25xs Custom-made, limited-edition remote control for vintage CD player. (Image 2) A compact remote with all the essential functions, featuring only the most commonly used buttons from the manufacturers original model (Image 1). Its superior design makes it both easy to operate and handle. This is a brand-new remote control with an excellent bang for your buck, ensuring decades of reliable use without issues common to older, original models from the manufacturer, such as the following: ? Buttons require strong pressure to respond. ? Some buttons dont work properly. ? Battery terminals are rusty. ? It only works when close to the player. ? Battery drains quickly. ? The back cover is cracked, causing the battery to fall out. Customer Reviews ? M (Tokyo) Since I began using this remote, my music-listening experience has completely changed for the better. It feels like my fingers and the player are connected, and I can intuitively control everything. This is exactly what I was looking for. Even when I’m enjoying music in a dark room, the remote’s white color means I never struggle to use it. Since getting this remote, Ive stopped using the manufacturers clunkier version, with its overwhelming number of functions. O (Kagoshima) I used to have trouble immersing myself in music and soon got tired of the sound quality, and for some reason I kept buying new equipment right away, but after getting this remote control, I finally calmed down. I was surprised how important it was to be free from the stress of difficult to operate the remote control! K (Kanagawa) The original remote control was difficult to use because the layout of the buttons was confusing, the PLAY and STOP buttons were far apart, and there were many functions that I hardly use. I threw it out the window immediately after purchasing this. S (Osaka) The button layout is excellent, and although its simple, it covers the essential functions such as repeat, display, time, volume, and program play. Its convenient because I can perform the basics without even looking at the remote. It has an aesthetic, high-end look to it, making it all the nicer to have. Thank you! T (USA) Recently, it has been getting harder and harder for me to see close up and it has become tedious to perform complicated operations. This remote control is great because I can do most of the operations just by placing my thumb on the center of the remote control. I bought it with the intention of using it as a sub-machine, but it has been used as my main remote control. small packet