PaymentRest assured that our store offers a variety of payment methods.Please pay within 5 days after auction is finished. About UsWe are located in Japan.For electrical products check the manufacturer and product and convert to the voltage of each country.We plan to ship by FedEx or DHL.Please contact us as the shipping fee can be changed in some cases. Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items please feel free to ask us. International Buyers - Please Note:-Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.>

THORENS TD 160 Super Turntable with SME M2-9 tonearm ($3400 alone !!) and Ortofon BRONZE cartridge It has been just bench tested. It works great. There has been special dampening material added to the sub platter system. ( SEE PICTURES ). The SME M2-9 Tone arm is about $3400The Ortofon BRONZE cartridge is about $400-450So the tonearm and cartridge alone is $3800 ! Pricing and Availability US retail prices are: M2-9 $3,395; M2-9R $4,295; M2-12 $3,695 and M2-12R $4,695. Thicker bearingSpecially damped floating chassisLarger and heavier baseResonance absorbing matTargeted for the Audiophile Turntable marketThorens Belt Drive SystemFloating Suspension System16-pole Two-phase MotorSeries M2 The Series M2 embraces four models the M2-9, M2-9R, M2-12 and M2-12R offering pivot-stylus dimensions covering virtually all turntable requirements. These arms offer at reasonable cost, meticulous build quality with all the most important features including lightweight stainless steel tonearm, detachable magnesium headshell with azimuth adjustment, tungsten balance weight, superb quality ball race bearings etc., and a level of stiffness and rigidity to suit all types of cartridge. These precision pick-up arms embody well tried SME principles and are suited to a broad range of cartridges including those of medium and low compliance.

PaymentRest assured that our store offers a variety of payment methods.Please pay within 5 days after auction is finished. About UsWe are located in Japan.For electrical products check the manufacturer and product and convert to the voltage of each country.We plan to ship by FedEx or DHL.Please contact us as the shipping fee can be changed in some cases. Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items please feel free to ask us. International Buyers - Please Note:-Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.>

4 x 24K Gold Plated SME M2-9 Tonearm 1.2mm - 1.3mm Headshell To Cartridge Connectors.We have had these Made to a Very High Standard, the Quality & Finish is Superb.They are Made of Phosphor Bronze & then Gold Plated With 24K Gold.Pin Size is 1.2mm, they can be Used with 1.3mm Cartridge Pins by Using a Little Bit of Force on them when Push Fitting them.They will Fit All Tonearms.Fitting Information:Carefully Prepare the Ends of the Leads that they are going to be Soldered to.Taking Great Care not to Burn Yourself (Ideally Use Some Thin Nose Pliers of Similar) to Hold the Connector Still, Place a Small Piece of Solder on the End of the Connector, then Join it with the Connecting Lead.Repeat on all Four Connectors, Fit your Cartridge & Push the Connector Pins in Place on the Cartridge.Tools Required:A Soldering Iron, Solder, Thin Nosed Pliers & a Pair of Cable Strippers.Please see Our Other Listing, we have these as a Complete Kit Including all Required Tools at the Price of £24.99Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions. Q: How Long Will I Have To Wait For My Order To Arrive ? A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)Q: Do You Provide Tracking Details ? A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.Q: My Tracking Details Do Not Work, Why ? A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.Q: Can You Send My Order To A Non Registered eBay - PayPal Address ? A: No, This Is Not Possible. PLEASE DO NOT ASK!Q: Will You Send By A Cheap Non Signed For Courier ? A: No, All Items Are Always Send Fully Signed For & Fully Trackable.Q: Will You Send Overseas ?A: We Ship To Many Countries Via eBay Global Shipping.Q: What Are The Costs To Ship To Me Overseas ?A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.

4 x 24K Gold Plated SME M2-9R Tonearm 1.2mm - 1.3mm Headshell To Cartridge Connectors.We have had these Made to a Very High Standard, the Quality & Finish is Superb.They are Made of Phosphor Bronze & then Gold Plated With 24K Gold.Pin Size is 1.2mm, they can be Used with 1.3mm Cartridge Pins by Using a Little Bit of Force on them when Push Fitting them.They will Fit All Tonearms.Fitting Information:Carefully Prepare the Ends of the Leads that they are going to be Soldered to.Taking Great Care not to Burn Yourself (Ideally Use Some Thin Nose Pliers of Similar) to Hold the Connector Still, Place a Small Piece of Solder on the End of the Connector, then Join it with the Connecting Lead.Repeat on all Four Connectors, Fit your Cartridge & Push the Connector Pins in Place on the Cartridge.Tools Required:A Soldering Iron, Solder, Thin Nosed Pliers & a Pair of Cable Strippers.Please see Our Other Listing, we have these as a Complete Kit Including all Required Tools at the Price of £24.99Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions. Q: How Long Will I Have To Wait For My Order To Arrive ? A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)Q: Do You Provide Tracking Details ? A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.Q: My Tracking Details Do Not Work, Why ? A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.Q: Can You Send My Order To A Non Registered eBay - PayPal Address ? A: No, This Is Not Possible. PLEASE DO NOT ASK!Q: Will You Send By A Cheap Non Signed For Courier ? A: No, All Items Are Always Send Fully Signed For & Fully Trackable.Q: Will You Send Overseas ?A: We Ship To Many Countries Via eBay Global Shipping.Q: What Are The Costs To Ship To Me Overseas ?A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.

4 x 24K Gold Plated SME M2-12 Tonearm 1.2mm - 1.3mm Headshell To Cartridge Connectors.We have had these Made to a Very High Standard, the Quality & Finish is Superb.They are Made of Phosphor Bronze & then Gold Plated With 24K Gold.Pin Size is 1.2mm, they can be Used with 1.3mm Cartridge Pins by Using a Little Bit of Force on them when Push Fitting them.They will Fit All Tonearms.Fitting Information:Carefully Prepare the Ends of the Leads that they are going to be Soldered to.Taking Great Care not to Burn Yourself (Ideally Use Some Thin Nose Pliers of Similar) to Hold the Connector Still, Place a Small Piece of Solder on the End of the Connector, then Join it with the Connecting Lead.Repeat on all Four Connectors, Fit your Cartridge & Push the Connector Pins in Place on the Cartridge.Tools Required:A Soldering Iron, Solder, Thin Nosed Pliers & a Pair of Cable Strippers.Please see Our Other Listing, we have these as a Complete Kit Including all Required Tools at the Price of £24.99Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions. Q: How Long Will I Have To Wait For My Order To Arrive ? A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)Q: Do You Provide Tracking Details ? A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.Q: My Tracking Details Do Not Work, Why ? A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.Q: Can You Send My Order To A Non Registered eBay - PayPal Address ? A: No, This Is Not Possible. PLEASE DO NOT ASK!Q: Will You Send By A Cheap Non Signed For Courier ? A: No, All Items Are Always Send Fully Signed For & Fully Trackable.Q: Will You Send Overseas ?A: We Ship To Many Countries Via eBay Global Shipping.Q: What Are The Costs To Ship To Me Overseas ?A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.

SME M2-12 Static Balance Type 12” Tonearm Pickup Arm Analog Audio Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. *The wooden pedestal in the photo is for photographic purposes only and is not included in the product. Specifications Type?Static BalancedEffective length (pivot to Stylus): 308.8mmOverhang: 13.21mmCartridge Weight Range: 5.0g to 12gStylus pressure adjustment range: 0g to 2.5g Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer?s responsibility.Please check with your country?s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as ?gifts? -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.