Schiit Mani 1 Phono Preamp (MM / MC) Made in USA Gray - With Adapter. It is in excellent working condition. A few very light, small minor scuffs on the bottom. Thank you.

Schitt Mani phono pre-amp in MINT CONDITION with power supply. Perfect working order and no signs of wear. This is a highly respected. Made in USA phono preamp to add to systems that have no phono section OR bypassing the often sub-par phono section of many receivers and amplifiers. Built-RIAA equalization with low noise and very tight tolerances. Will support MC ( moving coil) or MM (moving magnet) cartridges with 2 selectable load settings and 4 gain settings. Gain options. 30db,42db,48db, or 59 db Load options: 47 k ohms or 47 (for MC cartridges) (You probably know this but if you are a vinyl newbie. You plug the output of this preamp into any analog input such as “tape-in” , “aux” ,”cd”. Etc. NOT the “phono” input) Thanks for looking. It’s boxed and ready to ship immediately once paid. Shipping is at buyers actual expense but package is only 2 lbs and small. Shipping will be calculated at checkout based on your location Buy with confidence I have sold on eBay for 20 years with 100 % positive Feedback

Schiit Mani 1 Phono Preamp (MM / MC) Made in USA - With Adapter No Hidden Reserve See pics for condition works perfectly!

Schiit Mani 2 Phono Preamp (MM / MC) Made in USA - With Adapter . Condition is Used. Shipped with USPS Ground Advantage. I bought this new directly from Schitt. I have barely used it because I ended up exchanging my amplifier for one that had a built in phono input within a few weeks of buying it.

Schiit Mani 1 Phono Preamp (MM / MC) Made in USA - With Adapter No Hidden Reserve See pics for condition works perfectly!

Excellent condition phono preamp. Minimal use and single owner (me). Just a few minor scuffs (see pics). This will be packed properly and with plenty of protection to ensure it reaches you in the condition it leaves. I stand behind everything I sell. If you have any questions or concerns upon receipt, please contact me immediately and we will come up with a resolution to your satisfaction. Read my reviews and purchase with confidence.I have other vintage equipment, records, and CDs for sale. Over the next two weeks I will be listing over 10 turntables (Dual, Technics, Pioneer, BSR, Garrard, Sanyo, Hitachi), several receivers and amps, vintage headphones (Sennheiser , AKG, etc), several cassette decks (Teac), a BSR equalizer and a Heathkit tuner. I will also be listing several hundred vinyl records. Please check my current listings and come back to see new ones.

Schiit makes the best Schiit. This pre-amp replaced a highly regarded tube amp and sounds better and I love the small footprint. But I hardly ever spin records anymore and selling off my gear. This Mani is only about a year old and has hardly been used. Basically a brand new unit (which would cost ~$175 with tax and shipping). Power supply included (will add photos when I get a chance). Here is what Schiit says about the Mani: Mani 2 is simply the highest-performance affordable phono preamp, period. With super low noise and high RIAA accuracy, plus flexibility for pretty much any cartridge, MM, MC, or MI, it sets the standard for performance and capability in an affordable phono stage. Simply Stunning PerformanceMani 2 provides super low-noise performance that’s usually only seen in much more expensive phono preamps. Combining TI’s low-noise OPA1612 with a passive RIAA network with 2% precision film capacitors and 0.1% thin-film resistors in a DC-coupled topology, with advanced dual-filtered power supply and +/-16V rails, as well as switchable 1- or 2-pole passive LF filter, provides exceptional transparency and accuracy, as well as high overload margin, in an affordable phono preamp. Ultimate Flexibility—Loading, Gain, and LF FilteringMani 2 doesn’t sacrifice flexibility for low-cost, either. In fact, Mani 2 is the most flexible, capable affordable phono preamp, period. You have total control over:•Gain: Choose 33, 42, 48, or 60dB of gain, for virtually any cartridge from Decca to low-output MC and MI models.•Loading: Choose 47K?, 200?, 47?, or 38?, and 47pF, 100pF, 150pF, or 200pF for virtually any MM, MC, or MI cartridge•LF Filter: Choose 6dB/octave or 12dB/octave of purely passive low-frequency filtering to help with warped records or other subsonic problems. Designed and Built in TexasBy “designed and built in Texas,” this is what we mean: Mani 2 was designed and built at our Corpus Christi, Texas facility, and the vast majority of the total production cost of Mani 2—chassis, boards, assembly, etc—goes to US companies manufacturing in the USA. Our chassis are made in California. Our PCBs are done in Nevada. Yes, the wall-warts are made in Taiwan, but theres some give and take at this price point. SPECS: Gain 1 = L, Gain 2 = L (Decca Mode)Gain: 33dB THD: <0.0003%, A-weighted, ref 2V RMSSNR: >108dB, A-weighted, ref 2V RMSCrosstalk: -90dB, 20-20kHzSensitivity: 5.3mV for 300mV outputOverload Margin: >20dB Gain 1 = L, Gain 2 = H (Standard MM Mode) Gain: 42dBTHD: <0.0006%, A-weighted, ref 2V RMSSNR: >98dB, A-weighted, ref 2V RMSCrosstalk: -90dB, 20-20kHzSensitivity: 1.9mV for 300mV outputOverload Margin: >20dB Gain 1 = H, Gain 2 = L (Low Output MM/High Output MC Mode)Gain: 48dBTHD: <0.001%, A-weighted, ref 2V RMSSNR: >96dB, A-weighted, ref 2V RMSCrosstalk: -80dB, 20-20kHzSensitivity: 1.06mV for 300mV outputOverload Margin: >20dB Gain 1 = H, Gain 2 = H (MC Mode)Gain: 60dBTHD: <0.0015%, A-weighted, at 2V RMSSNR: >87dB, A-weighted, ref 2V RMSCrosstalk: -75dB, 20-20kHzSensitivity: 0.33mV for 300mV outputOverload Margin: >20dB Input Loading: Selectable R: 47K?, 200?, 47?, or 38?Selectable C: 47pF, 100pF, 150pF, or 200pF RIAA Accuracy: +/- 0.2dB, 20-20kHz Low Frequency Filter: 6dB/octave or 12dB/octave at 15 Hz, fully passive Output Impedance: 75 ohmsTopology: Fully passive RIAA network with OPA1612 gain stages, OP07 DC servo, switchable passive CR LF filter, 1- or 2- pole, 0.1% thin-film resistors, and 2% film capacitors Power Supply: “wall wart” style 16VAC transformer, dual-filtered, regulated +/- 16V railsPower Consumption: 4WSize: 5 x 3.5 x 1.25”Weight: 1 lb

Size: 5 in wide, 3.5 in deep, and 1.25 in high, weighing 1 lbPower: Uses a wall-wart style 16VAC transformer and consumes 4 WGain: Has four selectable gain modes: 30 dB, 42 dB, 47 dB, and 59 dB, accessible via DIP switches under the chassisCartridges: Works with both moving-magnet (MM) and moving-coil (MC) cartridgesLoad: Has two load switches: 47 for MC cartridges and 47K for MM cartridgesOther specs: RIAA accuracy of +/- 0.2 dB, 20–20 kHz, low frequency filter of 6 dB/octave or 12 dB/octave at 15 Hz, and output impedance of 75 ohms

The Schiit Audio Mani 2 is a high-quality phono preamplifier. This preamp has the flexibility for pretty much any cartridge, MM, MC, or MI, it sets the standard for performance and capability in an affordable phono stage. Gently used in a smoke-free environment. Stored in box for the last 6 months. It comes with an AC adapter, user manual, two stickers and will be mailed in its original box.

Ich biete einen Schiit Mani 2 Phonovorverstärker / Phono Preamp mit original Schiit EU-Netzteil (+Manual und Aufkleber). Zustand: Da ich keine klangliche Verbesserung zu meinem aktuellen Vorverstärker feststellen konnte, habe ich den Mani 2 nur rund einen Tag genutzt. Er ist absolut neuwertig, mit keinen ersichtlichen Gebrauchsspuren. Der Verkauf erfolgt unter Ausschluss jeglicher Gewährleistung. Privatverkauf. Keine Rücknahme.

Schiit Mani 1 Phono Preamp (MM / MC) Made in USA - With Adapter No Hidden Reserve See pics for condition works perfectly!

Schiit Mani 1 Phono Preamp (MM / MC) Made in USA - With Adapter No Hidden Reserve See pics for condition works perfectly!